summaryrefslogtreecommitdiff
path: root/Documentation/git-cherry-pick.txt
AgeCommit message (Collapse)AuthorFilesLines
2011-11-22revert: introduce --abort to cancel a failed cherry-pickLibravatar Jonathan Nieder1-0/+1
After running some ill-advised command like "git cherry-pick HEAD..linux-next", the bewildered novice may want to return to more familiar territory. Introduce a "git cherry-pick --abort" command that rolls back the entire cherry-pick sequence and places the repository back on solid ground. Just like "git merge --abort", this internally uses "git reset --merge", so local changes not involved in the conflict resolution are preserved. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-22revert: rename --reset option to --quitLibravatar Jonathan Nieder1-1/+1
The option to "git cherry-pick" and "git revert" to discard the sequencer state introduced by v1.7.8-rc0~141^2~6 (revert: Introduce --reset to remove sequencer state, 2011-08-04) has a confusing name. Change it now, while we still have the time. The new name for "cherry-pick, please get out of my way, since I've long forgotten about the sequence of commits I was cherry-picking when you wrote that old .git/sequencer directory" is --quit. Mnemonic: this is analagous to quiting a program the user is no longer using --- we just want to get out of the multiple-command cherry-pick procedure and not to reset HEAD or rewind any other old state. The "--reset" option is kept as a synonym to minimize the impact. We might consider dropping it for simplicity in a separate patch, though. Adjust documentation and tests to use the newly preferred name (--quit) instead of --reset. While at it, let's clarify the short descriptions of these operations in "-h" output. Before: --reset forget the current operation --continue continue the current operation After: --quit end revert or cherry-pick sequence --continue resume revert or cherry-pick sequence Noticed-by: Phil Hord <phil.hord@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-05Merge branch 'rr/revert-cherry-pick-continue'Libravatar Junio C Hamano1-0/+6
* rr/revert-cherry-pick-continue: builtin/revert.c: make commit_list_append() static revert: Propagate errors upwards from do_pick_commit revert: Introduce --continue to continue the operation revert: Don't implicitly stomp pending sequencer operation revert: Remove sequencer state when no commits are pending reset: Make reset remove the sequencer state revert: Introduce --reset to remove sequencer state revert: Make pick_commits functionally act on a commit list revert: Save command-line options for continuing operation revert: Save data for continuing after conflict resolution revert: Don't create invalid replay_opts in parse_args revert: Separate cmdline parsing from functional code revert: Introduce struct to keep command-line options revert: Eliminate global "commit" variable revert: Rename no_replay to record_origin revert: Don't check lone argument in get_encoding revert: Simplify and inline add_message_to_msg config: Introduce functions to write non-standard file advice: Introduce error_resolve_conflict
2011-08-08revert: Introduce --continue to continue the operationLibravatar Ramkumar Ramachandra1-0/+1
Introduce a new "git cherry-pick --continue" command which uses the information in ".git/sequencer" to continue a cherry-pick that stopped because of a conflict or other error. It works by dropping the first instruction from .git/sequencer/todo and performing the remaining cherry-picks listed there, with options (think "-s" and "-X") from the initial command listed in ".git/sequencer/opts". So now you can do: $ git cherry-pick -Xpatience foo..bar ... description conflict in commit moo ... $ git cherry-pick --continue error: 'cherry-pick' is not possible because you have unmerged files. fatal: failed to resume cherry-pick $ echo resolved >conflictingfile $ git add conflictingfile && git commit $ git cherry-pick --continue; # resumes with the commit after "moo" During the "git commit" stage, CHERRY_PICK_HEAD will aid by providing the commit message from the conflicting "moo" commit. Note that the cherry-pick mechanism has no control at this stage, so the user is free to violate anything that was specified during the first cherry-pick invocation. For example, if "-x" was specified during the first cherry-pick invocation, the user is free to edit out the message during commit time. Note that the "--signoff" option specified at cherry-pick invocation time is not reflected in the commit message provided by CHERRY_PICK_HEAD; the user must take care to add "--signoff" during the "git commit" invocation. Helped-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04docs: put listed example commands in backticksLibravatar Jeff King1-7/+7
Many examples of git command invocation are given in asciidoc listing blocks, which makes them monospaced and avoids further interpretation of special characters. Some manpages make a list of examples, like: git foo:: Run git foo. git foo -q:: Use the "-q" option. to quickly show many variants. However, they can sometimes be hard to read, because they are shown in a proportional-width font (so, for example, seeing the difference between "-- foo" and "--foo" can be difficult). This patch puts all such examples into backticks, which gives the equivalent formatting to a listing block (i.e., monospaced and without character interpretation). As a bonus, this also fixes an example in the git-push manpage, in which "git push origin :::" was accidentally considered a newly-indented list, and not a list item with "git push origin :" in it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04revert: Introduce --reset to remove sequencer stateLibravatar Ramkumar Ramachandra1-0/+5
To explicitly remove the sequencer state for a fresh cherry-pick or revert invocation, introduce a new subcommand called "--reset" to remove the sequencer state. Take the opportunity to publicly expose the sequencer paths, and a generic function called "remove_sequencer_state" that various git programs can use to remove the sequencer state in a uniform manner; "git reset" uses it later in this series. Introducing this public API is also in line with our long-term goal of eventually factoring out functions from revert.c into a generic commit sequencer. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-06Documentation: use [verse] for SYNOPSIS sectionsLibravatar Martin von Zweigbergk1-0/+1
The SYNOPSIS sections of most commands that span several lines already use [verse] to retain line breaks. Most commands that don't span several lines seem not to use [verse]. In the HTML output, [verse] does not only preserve line breaks, but also makes the section indented, which causes a slight inconsistency between commands that use [verse] and those that don't. Use [verse] in all SYNOPSIS sections for consistency. Also remove the blank lines from git-fetch.txt and git-rebase.txt to align with the other man pages. In the case of git-rebase.txt, which already uses [verse], the blank line makes the [verse] not apply to the last line, so removing the blank line also makes the formatting within the document more consistent. While at it, add single quotes to 'git cvsimport' for consistency with other commands. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-04Merge branch 'ss/cherry-pick-x-doc'Libravatar Junio C Hamano1-3/+4
* ss/cherry-pick-x-doc: doc: Clarify that "cherry-pick -x" does not use "git notes"
2011-04-15doc: Clarify that "cherry-pick -x" does not use "git notes"Libravatar Sebastian Schuberth1-3/+4
The documentation for "cherry-pick -x" could be misread in the way that a "git notes" object is attached to the new commit, which is not the case. Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-11doc: drop author/documentation sections from most pagesLibravatar Jeff King1-8/+0
The point of these sections is generally to: 1. Give credit where it is due. 2. Give the reader an idea of where to ask questions or file bug reports. But they don't do a good job of either case. For (1), they are out of date and incomplete. A much more accurate answer can be gotten through shortlog or blame. For (2), the correct contact point is generally git@vger, and even if you wanted to cc the contact point, the out-of-date and incomplete fields mean you're likely sending to somebody useless. So let's drop the fields entirely from all manpages except git(1) itself. We already point people to the mailing list for bug reports there, and we can update the Authors section to give credit to the major contributors and point to shortlog and blame for more information. Each page has a "This is part of git" footer, so people can follow that to the main git manpage.
2011-03-09Merge branch 'js/cherry-pick-usability'Libravatar Junio C Hamano1-0/+19
* js/cherry-pick-usability: Teach commit about CHERRY_PICK_HEAD bash: teach __git_ps1 about CHERRY_PICK_HEAD Introduce CHERRY_PICK_HEAD t3507: introduce pristine-detach helper
2011-02-21Introduce CHERRY_PICK_HEADLibravatar Jay Soffian1-0/+19
When a cherry-pick conflicts git advises: $ git commit -c <original commit id> to preserve the original commit message and authorship. Instead, let's record the original commit id in CHERRY_PICK_HEAD and advise: $ git commit -c CHERRY_PICK_HEAD A later patch teaches git to handle the '-c CHERRY_PICK_HEAD' part. Note that we record CHERRY_PICK_HEAD even in the case where there are no conflicts so that we may use it to communicate authorship to commit; this will then allow us to remove set_author_ident_env from revert.c. However, we do not record CHERRY_PICK_HEAD when --no-commit is used, as presumably the user intends to further edit the commit and possibly even cherry-pick additional commits on top. Tests and documentation contributed by Jonathan Nieder. Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-28cherry-pick/revert: add support for -X/--strategy-optionLibravatar Jonathan Nieder1-0/+32
For example, this would allow cherry-picking or reverting patches from a piece of history with a different end-of-line style, like so: $ git revert -Xrenormalize old-problematic-commit Currently that is possible with manual use of merge-recursive but the cherry-pick/revert porcelain does not expose the functionality. While at it, document the existing support for --strategy. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-02Documentation: Fix mark-up of lines with more than one tildeLibravatar Junio C Hamano1-1/+1
The manual pages of cherry-pick and revert had examples with two revisions on the same line in the examples section, that looked like this: git cherry-pick master~4 master~2:: Unfortunately, this is taken as a mark-up to make the part between two tildes, "4 master", subscript. Use {tilde} to make it explicit that we do want ~ characters in these places (backslash does not help). Reported-by: Sylvain Rabot <sylvain.rabot@f-secure.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-13Documentation: gitrevisions is in section 7Libravatar Jonathan Nieder1-1/+1
Fix references to gitrevisions(1) in the manual pages and HTML documentation. In practice, this will not matter much unless someone tries to use a hard copy of the git reference manual. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-05Documentation: link to gitrevisions rather than git-rev-parseLibravatar Michael J Gruber1-2/+2
Currently, whenever we need documentation for revisions and ranges, we link to the git-rev-parse man page, i.e. a plumbing man page, which has this along with the documentation of all rev-parse modes. Link to the new gitrevisions man page instead in all cases except - when the actual git-rev-parse command is referred to or - in very technical context (git-send-pack). Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25revert: accept arbitrary rev-list optionsLibravatar Christian Couder1-0/+7
This can be useful to do something like: git rev-list --reverse master -- README | git cherry-pick -n --stdin without using xargs. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-02Documentation/cherry-pick: describe passing more than one commitLibravatar Christian Couder1-11/+53
And while at it, add an "EXAMPLES" section. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-06Documentation: describe new cherry-pick --ff optionLibravatar Christian Couder1-1/+5
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-1/+1
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2008-11-23Fix misleading wording for git-cherry-pickLibravatar Bryan Drewery1-7/+6
Documentation for -n implies that -x is normally used, however this is no longer true. Signed-off-by: Bryan Drewery <bryan@shatow.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21Update my e-mail addressLibravatar Junio C Hamano1-1/+1
The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-16Merge branch 'maint'Libravatar Junio C Hamano1-5/+5
* maint: Start preparing 1.5.6.4 release notes git fetch-pack: do not complain about "no common commits" in an empty repo rebase-i: keep old parents when preserving merges t7600-merge: Use test_expect_failure to test option parsing Fix buffer overflow in prepare_attr_stack Fix buffer overflow in git diff Fix buffer overflow in git-grep git-cvsserver: fix call to nonexistant cleanupWorkDir() Documentation/git-cherry-pick.txt et al.: Fix misleading -n description Conflicts: RelNotes
2008-07-16Documentation/git-cherry-pick.txt et al.: Fix misleading -n descriptionLibravatar Petr Baudis1-5/+5
The manual page of git-cherry-pick and git-revert asserts that -n works primarily on the working tree, while in fact the primary object it operates on is the index, and the changes only "accidentally" propagate to the working tree. This e.g. leads innocent #git IRC folks to believe that you can use -n to prepare changes for git-add -i staging. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-1/+1
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-1/+1
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-4/+8
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-26Allow cherry-pick (and revert) to add signoff lineLibravatar Dan McGee1-1/+4
I often find myself pulling patches off of other peoples trees using cherry-pick, and following it with an immediate 'git commit --amend -s' command. Eliminate the need for a double commit by allowing signoff on a cherry-pick or revert. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-29Documentation cherry-pick: Fix cut-and-paste errorLibravatar Mike Ralphson1-1/+1
Signed-off-by: Mike Ralphson <mike@abacus.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-19doc typo: s/prior committing/prior to committing/Libravatar Jim Meyering1-1/+1
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-2/+2
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-26revert/cherry-pick: work on merge commits as wellLibravatar Junio C Hamano1-1/+8
Usually you cannot revert a merge because you do not know which side of the merge should be considered the mainline (iow, what change to reverse). With this patch, cherry-pick and revert learn -m (--mainline) option that lets you specify the parent number (starting from 1) of the mainline, so that you can: git revert -m 1 $merge to reverse the changes introduced by the $merge commit relative to its first parent, and: git cherry-pick -m 2 $merge to replay the changes introduced by the $merge commit relative to its second parent. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-22git-cherry-pick: improve description of -x.Libravatar Ralf Wildenhues1-5/+6
Reword the first sentence of the description of -x, in order to make it easier to read and understand. Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-18Update git-cherry-pick documentationLibravatar Andrew Ruder1-1/+1
Documentation/git-cherry-pick.txt: Remove --replay as it is not handled by the code (-r is however). Signed-off-by: Andrew Ruder <andy@aeruder.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-17Refer users to git-rev-parse for revision specification syntax.Libravatar Shawn O. Pearce1-0/+2
The revision specification syntax (sometimes referred to as SHA1-expressions) is accepted almost everywhere in Git by almost every tool. Unfortunately it is only documented in git-rev-parse.txt, and most users don't know to look there. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-05cherry-pick: make -r the defaultLibravatar Junio C Hamano1-7/+16
And introduce -x to expose (possibly) private commit object name for people who cherry-pick between public branches. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09Remove trailing dot after short descriptionLibravatar Fredrik Kuivinen1-1/+1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-08Add documentation for git-revert and git-cherry-pick.Libravatar Nikolai Weibull1-1/+1
* Added the -e option to the documentation of git-cherry-pick. * Added the -e and --no-commit option to git-revert. * Removed redundant case expression for -n as --no-edit (already taken by --no-commit). Signed-off-by: Nikolai Weibull <nikolai@bitwi.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-08Documentation/git-cherry-pick: Add --replay and --no-commit.Libravatar Nikolai Weibull1-2/+2
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-04Documentation: rebase does not use cherry-pick anymore.Libravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-04Document the --(no-)edit switch of git-revert and git-cherry-pickLibravatar Petr Baudis1-1/+5
This switch was not documented properly. I decided not to mention the --no-edit switch in the git-cherry-pick documentation since we always default to no editing. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-05Some typos and light editing of various manpagesLibravatar Christian Meder1-1/+1
Typos, light editing and clarifications. Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03[PATCH] Random documentation fixesLibravatar Jonas Fonseca1-3/+3
The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07Big tool rename.Libravatar Junio C Hamano1-0/+57
As promised, this is the "big tool rename" patch. The primary differences since 0.99.6 are: (1) git-*-script are no more. The commands installed do not have any such suffix so users do not have to remember if something is implemented as a shell script or not. (2) Many command names with 'cache' in them are renamed with 'index' if that is what they mean. There are backward compatibility symblic links so that you and Porcelains can keep using the old names, but the backward compatibility support is expected to be removed in the near future. Signed-off-by: Junio C Hamano <junkio@cox.net>