summaryrefslogtreecommitdiff
path: root/Documentation/git-checkout-index.txt
AgeCommit message (Collapse)AuthorFilesLines
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-4/+4
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-1/+1
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-10/+10
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-5/+10
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-1/+1
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-01-18Documentation: sync git.txt command list and manual page titleLibravatar Junio C Hamano1-1/+1
Also reorders a handful entries to make each list sorted alphabetically. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05Fix up docs where "--" isn't displayed correctly.Libravatar sean1-1/+1
A bare "--" doesn't show up in man or html pages correctly as two individual dashes unless backslashed as \-- in the asciidoc source. Note, no backslash is needed inside a literal block. Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-05Add --temp and --stage=all options to checkout-index.Libravatar Shawn Pearce1-2/+49
Sometimes it is convient for a Porcelain to be able to checkout all unmerged files in all stages so that an external merge tool can be executed by the Porcelain or the end-user. Using git-unpack-file on each stage individually incurs a rather high penalty due to the need to fork for each file version obtained. git-checkout-index -a --stage=all will now do the same thing, but faster. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-01Teach git-checkout-index to read filenames from stdin.Libravatar Shawn Pearce1-2/+18
Since git-checkout-index is often used from scripts which may have a stream of filenames they wish to checkout it is more convenient to use --stdin than xargs. On platforms where fork performance is currently sub-optimal and the length of a command line is limited (*cough* Cygwin *cough*) running a single git-checkout-index process for a large number of files beats spawning it multiple times from xargs. File names are still accepted on the command line if --stdin is not supplied. Nothing is performed if no files are supplied on the command line or by stdin. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-05Wrap synopsis lines and use [verse] to keep formattingLibravatar Jonas Fonseca1-1/+2
In addition, also fixes a few synopses to be more consistent and a gitlink. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-07checkout-index: allow checking out from higher stages.Libravatar Junio C Hamano1-1/+5
The new option, --stage=<n>, lets you copy out from an unmerged, higher stage. This is to help the new merge world order during a nontrivial merge. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-05Added documentation for few missing options.Libravatar Jon Loeliger1-27/+45
More $ shell prompts in examples. Minor English grammar improvements. Added a few "See Also"s. Use back-ticks on more command examples. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-14Document a couple of missing command-line options.Libravatar Nikolai Weibull1-5/+5
This patch adds documentation to quite a few command-line options. Signed-off-by: Nikolai Weibull <nikolai@bitwi.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-11Change 'cache' to 'index' in the docsLibravatar Lukas_Sandström1-7/+7
This patch makes the documentation refer to the index as index instead of cache, but some references still remain. (e.g. git-update-index.txt) Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-17Merge branch 'fixes'Libravatar Junio C Hamano1-13/+7
2005-10-17git-checkout-index: documentation updates.Libravatar Junio C Hamano1-13/+7
Now the behaviour of '-a' has been straightened out, document it. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07Big tool rename.Libravatar Junio C Hamano1-0/+106
As promised, this is the "big tool rename" patch. The primary differences since 0.99.6 are: (1) git-*-script are no more. The commands installed do not have any such suffix so users do not have to remember if something is implemented as a shell script or not. (2) Many command names with 'cache' in them are renamed with 'index' if that is what they mean. There are backward compatibility symblic links so that you and Porcelains can keep using the old names, but the backward compatibility support is expected to be removed in the near future. Signed-off-by: Junio C Hamano <junkio@cox.net>