summaryrefslogtreecommitdiff
path: root/Documentation/git-check-ref-format.txt
AgeCommit message (Collapse)AuthorFilesLines
2017-02-21git-check-ref-format: clarify documentation for --normalizeLibravatar Damien Regad1-3/+3
Use of 'iff' may be confusing to people not familiar with this term. Improving the --normalize option's documentation to remove the use of 'iff', and clearly describe what happens when the condition is not met. Signed-off-by: Damien Regad <dregad@mantisbt.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-21git-check-ref-format.txt: fixup documentationLibravatar Elia Pinto1-2/+2
die is not a standard shell function. Use a different shell code for the example. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-10Merge branch 'nd/doc-check-ref-format-typo'Libravatar Junio C Hamano1-1/+1
* nd/doc-check-ref-format-typo: git-check-ref-format.txt: typo, s/avoids/avoid/
2015-12-04git-check-ref-format.txt: typo, s/avoids/avoid/Libravatar Nguyễn Thái Ngọc Duy1-1/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-07-27refs: loosen restriction on wildcard "*" refspecsLibravatar Jacob Keller1-2/+2
Loosen restrictions on refspecs by allowing patterns that have a "*" within a component instead of only as the whole component. Remove the logic to accept a single "*" as a whole component from check_refname_format(), and implement an extended form of that logic in check_refname_component(). Pass the pointer to the flags argument to the latter, as it has to clear REFNAME_REFSPEC_PATTERN bit when it sees "*". Teach check_refname_component() function to allow an asterisk "*" only when REFNAME_REFSPEC_PATTERN is set in the flags, and drop the bit after seeing a "*", to ensure that one side of a refspec contains at most one asterisk. This will allow us to accept refspecs such as `for/bar*:foo/baz*`. Any refspec which functioned before shall continue functioning with the new logic. Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-12Add new @ shortcut for HEADLibravatar Felipe Contreras1-0/+2
Typing 'HEAD' is tedious, especially when we can use '@' instead. The reason for choosing '@' is that it follows naturally from the ref@op syntax (e.g. HEAD@{u}), except we have no ref, and no operation, and when we don't have those, it makes sens to assume 'HEAD'. So now we can use 'git show @~1', and all that goody goodness. Until now '@' was a valid name, but it conflicts with this idea, so let's make it invalid. Probably very few people, if any, used this name. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-14Revert "Add new @ shortcut for HEAD"Libravatar Junio C Hamano1-2/+0
This reverts commit cdfd94837b27c220f70f032b596ea993d195488f, as it does not just apply to "@" (and forms with modifiers like @{u} applied to it), but also affects e.g. "refs/heads/@/foo", which it shouldn't. The basic idea of giving a short-hand might be good, and the topic can be retried later, but let's revert to avoid affecting existing use cases for now for the upcoming release.
2013-06-11Merge branch 'fc/at-head'Libravatar Junio C Hamano1-0/+2
Instead of typing four capital letters "HEAD", you can say "@" instead. * fc/at-head: sha1_name: compare variable with constant, not constant with variable Add new @ shortcut for HEAD sha1_name: refactor reinterpret() sha1_name: check @{-N} errors sooner sha1_name: reorganize get_sha1_basic() sha1_name: don't waste cycles in the @-parsing loop sha1_name: remove unnecessary braces sha1_name: remove no-op tests: at-combinations: @{N} versus HEAD@{N} tests: at-combinations: increase coverage tests: at-combinations: improve nonsense() tests: at-combinations: check ref names directly tests: at-combinations: simplify setup
2013-05-17documentation: trivial style cleanupsLibravatar Felipe Contreras1-2/+1
White-spaces, missing braces, standardize --[no-]foo. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-08Add new @ shortcut for HEADLibravatar Felipe Contreras1-0/+2
Typing 'HEAD' is tedious, especially when we can use '@' instead. The reason for choosing '@' is that it follows naturally from the ref@op syntax (e.g. HEAD@{u}), except we have no ref, and no operation, and when we don't have those, it makes sens to assume 'HEAD'. So now we can use 'git show @~1', and all that goody goodness. Until now '@' was a valid name, but it conflicts with this idea, so let's make it invalid. Probably very few people, if any, used this name. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-01Documentation: the name of the system is 'Git', not 'git'Libravatar Thomas Ackermann1-2/+2
Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-26docs: stop using asciidoc no-inline-literalLibravatar Jeff King1-6/+6
In asciidoc 7, backticks like `foo` produced a typographic effect, but did not otherwise affect the syntax. In asciidoc 8, backticks introduce an "inline literal" inside which markup is not interpreted. To keep compatibility with existing documents, asciidoc 8 has a "no-inline-literal" attribute to keep the old behavior. We enabled this so that the documentation could be built on either version. It has been several years now, and asciidoc 7 is no longer in wide use. We can now decide whether or not we want inline literals on their own merits, which are: 1. The source is much easier to read when the literal contains punctuation. You can use `master~1` instead of `master{tilde}1`. 2. They are less error-prone. Because of point (1), we tend to make mistakes and forget the extra layer of quoting. This patch removes the no-inline-literal attribute from the Makefile and converts every use of backticks in the documentation to an inline literal (they must be cleaned up, or the example above would literally show "{tilde}" in the output). Problematic sites were found by grepping for '`.*[{\\]' and examined and fixed manually. The results were then verified by comparing the output of "html2text" on the set of generated html pages. Doing so revealed that in addition to making the source more readable, this patch fixes several formatting bugs: - HTML rendering used the ellipsis character instead of literal "..." in code examples (like "git log A...B") - some code examples used the right-arrow character instead of '->' because they failed to quote - api-config.txt did not quote tilde, and the resulting HTML contained a bogus snippet like: <tt><sub></tt> foo <tt></sub>bar</tt> which caused some parsers to choke and omit whole sections of the page. - git-commit.txt confused ``foo`` (backticks inside a literal) with ``foo'' (matched double-quotes) - mentions of `A U Thor <author@example.com>` used to erroneously auto-generate a mailto footnote for author@example.com - the description of --word-diff=plain incorrectly showed the output as "[-removed-] and {added}", not "{+added+}". - using "prime" notation like: commit `C` and its replacement `C'` confused asciidoc into thinking that everything between the first backtick and the final apostrophe were meant to be inside matched quotes - asciidoc got confused by the escaping of some of our asterisks. In particular, `credential.\*` and `credential.<url>.\*` properly escaped the asterisk in the first case, but literally passed through the backslash in the second case. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-05Change check_refname_format() to reject unnormalized refnamesLibravatar Michael Haggerty1-8/+18
Since much of the infrastructure does not work correctly with unnormalized refnames, change check_refname_format() to reject them. Similarly, change "git check-ref-format" to reject unnormalized refnames by default. But add an option --normalize, which causes "git check-ref-format" to normalize the refname before checking its format, and print the normalized refname. This is exactly the behavior of the old --print option, which is retained but deprecated. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-05Do not allow ".lock" at the end of any refname componentLibravatar Michael Haggerty1-3/+1
Allowing any refname component to end with ".lock" is looking for trouble; for example, $ git br foo.lock/bar $ git br foo fatal: Unable to create '[...]/.git/refs/heads/foo.lock': File exists. Therefore, do not allow any refname component to end with ".lock". Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-05git check-ref-format: add options --allow-onelevel and --refspec-patternLibravatar Michael Haggerty1-5/+24
Also add tests of the new options. (Actually, one big reason to add the new options is to make it easy to test check_ref_format(), though the options should also be useful to other scripts.) Interpret the result of check_ref_format() based on which types of refnames are allowed. However, because check_ref_format() can only return a single value, one test case is still broken. Specifically, the case "git check-ref-format --onelevel '*'" incorrectly succeeds because check_ref_format() returns CHECK_REF_FORMAT_ONELEVEL for this refname even though the refname is also CHECK_REF_FORMAT_WILDCARD. The type of check that leads to this failure is used elsewhere in "real" code and could lead to bugs; it will be fixed over the next few commits. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-23check-ref-format doc: de-emphasize the implementation detail of a refLibravatar Junio C Hamano1-3/+6
It is an unimportant implementation detail that branches and tags are stored somewhere under $GIT_DIR/refs directory. What is more important is that branches live in refs/heads and tags live in refs/tags hierarchy in the ref namespace. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-13Documentation: gitrevisions is in section 7Libravatar Jonathan Nieder1-1/+1
Fix references to gitrevisions(1) in the manual pages and HTML documentation. In practice, this will not matter much unless someone tries to use a hard copy of the git reference manual. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-05Documentation: link to gitrevisions rather than git-rev-parseLibravatar Michael J Gruber1-1/+1
Currently, whenever we need documentation for revisions and ranges, we link to the git-rev-parse man page, i.e. a plumbing man page, which has this along with the documentation of all rev-parse modes. Link to the new gitrevisions man page instead in all cases except - when the actual git-rev-parse command is referred to or - in very technical context (git-send-pack). Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17docs: don't talk about $GIT_DIR/refs/ everywhereLibravatar Jeff King1-2/+3
It is misleading to say that we pull refs from $GIT_DIR/refs/*, because we may also consult the packed refs mechanism. These days we tend to treat the "refs hierarchy" as more of an abstract namespace that happens to be represented as $GIT_DIR/refs. At best, this is a minor inaccuracy, but at worst it can confuse users who then look in $GIT_DIR/refs and find that it is missing some of the refs they expected to see. This patch drops most uses of "$GIT_DIR/refs/*", changing them into just "refs/*", under the assumption that users can handle the concept of an abstract refs namespace. There are a few things to note: - most cases just dropped the $GIT_DIR/ portion. But for cases where that left _just_ the word "refs", I changed it to "refs/" to help indicate that it was a hierarchy. I didn't do the same for longer paths (e.g., "refs/heads" remained, instead of becoming "refs/heads/"). - in some cases, no change was made, as the text was explicitly about unpacked refs (e.g., the discussion in git-pack-refs). - In some cases it made sense instead to note the existence of packed refs (e.g., in check-ref-format and rev-parse). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-12Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: Fix typo in 1.6.6.2 release notes Re-fix check-ref-format documentation mark-up
2010-02-12Re-fix check-ref-format documentation mark-upLibravatar Junio C Hamano1-1/+1
It is not double-backslash we forbid; backslashes are forbidden since a4c2e699 (Disallow '\' in ref names, 2009-05-08) Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-10Sync with 1.6.6.2Libravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-10check-ref-format documentation: fix enumeration mark-upLibravatar Junio C Hamano1-1/+1
The last item in the enumerated refname rule was mistakenly made into a sub-item of the 7th one. It should be the 8th one in the list on its own. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-1/+1
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2009-10-30Merge branch 'jn/show-normalized-refs'Libravatar Junio C Hamano1-6/+19
* jn/show-normalized-refs: check-ref-format: simplify --print implementation git check-ref-format --print Add tests for git check-ref-format Conflicts: Documentation/git-check-ref-format.txt
2009-10-18Merge branch 'jn/maint-1.6.3-check-ref-format-doc'Libravatar Junio C Hamano1-3/+6
* jn/maint-1.6.3-check-ref-format-doc: Documentation: describe check-ref-format --branch
2009-10-12git check-ref-format --printLibravatar Junio C Hamano1-6/+19
Tolerating empty path components in ref names means each ref does not have a unique name. This creates difficulty for porcelains that want to see if two branches are equal. Add a helper associating to each ref a canonical name. If a user asks a porcelain to create a ref "refs/heads//master", the porcelain can run "git check-ref-format --print refs/heads//master" and only deal with "refs/heads/master" from then on. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-12Documentation: describe check-ref-format --branchLibravatar Jonathan Nieder1-3/+6
Unless one already knew, it was not obvious what sort of shorthand "git check-ref-format --branch" expands. Explain it. The --branch argument is not optional. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-23Merge branch 'rr/forbid-bs-in-ref'Libravatar Junio C Hamano1-0/+2
* rr/forbid-bs-in-ref: Disallow '\' in ref names
2009-05-13Documentation: clarify / requirement in 'git check-ref-format'Libravatar Michael J Gruber1-0/+4
'git check-ref-format' checks for the presence of at least one '/', the idea being that there should be no refs directly below 'refs/', so there should be a category like 'heads/' or 'tags/' in a refname. Try and make this clearer in the man page. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-09Disallow '\' in ref namesLibravatar Robin Rosenberg1-0/+2
This is asking for trouble since '\' is a directory separator in Windows and thus may produce unpredictable results. Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-06Merge branch 'jc/name-branch'Libravatar Junio C Hamano1-1/+19
* jc/name-branch: Don't permit ref/branch names to end with ".lock" check_ref_format(): tighten refname rules strbuf_check_branch_ref(): a helper to check a refname for a branch Fix branch -m @{-1} newname check-ref-format --branch: give Porcelain a way to grok branch shorthand strbuf_branchname(): a wrapper for branch name shorthands Rename interpret/substitute nth_last_branch functions Conflicts: Documentation/git-check-ref-format.txt
2009-03-24Don't permit ref/branch names to end with ".lock"Libravatar Shawn O. Pearce1-0/+2
We already skip over loose refs under $GIT_DIR/refs if the name ends with ".lock", so creating a branch named "foo.lock" will not appear in the output of "git branch", "git for-each-ref", nor will its commit be considered reachable by "git rev-list --all". In the latter case this is especially evil, as it may cause repository corruption when objects reachable only through such a ref are deleted by "git prune". It should be reasonably safe to deny use of ".lock" as a ref suffix. In prior versions of Git such branches would be "phantom branches"; you can create it, but you can't see it in "git branch" output. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-24check_ref_format(): tighten refname rulesLibravatar Junio C Hamano1-1/+5
This changes the rules for refnames to forbid: (1) a refname that contains "@{" in it. Some people and foreign SCM converter may have named their branches as frotz@24 and we still want to keep supporting it. However, "git branch frotz@{24}" is a disaster. It cannot even checked out because "git checkout frotz@{24}" will interpret it as "detach the HEAD at twenty-fourth reflog entry of the frotz branch". (2) a refname that ends with a dot. We already reject a path component that begins with a dot, primarily to avoid ambiguous range interpretation. If we allowed ".B" as a valid ref, it is unclear if "A...B" means "in dot-B but not in A" or "either in A or B but not in both". But for this to be complete, we need also to forbid "A." to avoid "in B but not in A-dot". This was not a problem in the original range notation, but we should have added this restriction when three-dot notation was introduced. Unlike "no dot at the beginning of any path component" rule, this rule does not have to be "no dot at the end of any path component", because you cannot abbreviate the tail end away, similar to you can say "dot-B" to mean "refs/heads/dot-B". For these reasons, it is not likely people created branches with these names on purpose, but we have allowed such names to be used for quite some time, and it is possible that people created such branches by mistake or by accident. To help people with branches with such unfortunate names to recover, we still allow "branch -d 'bad.'" to delete such branches, and also allow "branch -m bad. good" to rename them. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-22check-ref-format --branch: give Porcelain a way to grok branch shorthandLibravatar Junio C Hamano1-0/+12
The command may not be the best place to add this new feature, but $ git check-ref-format --branch "@{-1}" allows Porcelains to figure out what branch you were on before the last branch switching. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-22Documentation: minor grammatical fix in git-check-ref-format.txtLibravatar David J. Mellor1-20/+20
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-1/+1
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-1/+1
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-2/+2
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-3/+3
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2006-06-07Some doc typo fixesLibravatar Francis Daly1-2/+3
All should be clear enough, except perhaps committish / commitish. I just kept the more-used one within the current docs. [jc: with rephrasing of check-ref-format description later discussed on the list] Signed-off-by: Francis Daly <francis@daoine.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-21Elaborate on why ':' is a bad idea in a ref name.Libravatar Shawn Pearce1-0/+2
With the new cat-file syntax of 'v1.3.3:refs.c' we should mention it as part of the reason why ':' is not permitted in a ref name. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09Remove trailing dot after short descriptionLibravatar Fredrik Kuivinen1-1/+1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-16Forbid pattern maching characters in refnames.Libravatar Junio C Hamano1-3/+5
by marking '?', '*', and '[' as bad_ref_char(). Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-16ref-format documentation.Libravatar Junio C Hamano1-0/+50
Signed-off-by: Junio C Hamano <junkio@cox.net>