| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Typing 'HEAD' is tedious, especially when we can use '@' instead.
The reason for choosing '@' is that it follows naturally from the
ref@op syntax (e.g. HEAD@{u}), except we have no ref, and no
operation, and when we don't have those, it makes sens to assume
'HEAD'.
So now we can use 'git show @~1', and all that goody goodness.
Until now '@' was a valid name, but it conflicts with this idea, so
let's make it invalid. Probably very few people, if any, used this name.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit cdfd94837b27c220f70f032b596ea993d195488f, as it
does not just apply to "@" (and forms with modifiers like @{u}
applied to it), but also affects e.g. "refs/heads/@/foo", which it
shouldn't.
The basic idea of giving a short-hand might be good, and the topic
can be retried later, but let's revert to avoid affecting existing
use cases for now for the upcoming release.
|
|
Instead of typing four capital letters "HEAD", you can say "@"
instead.
* fc/at-head:
sha1_name: compare variable with constant, not constant with variable
Add new @ shortcut for HEAD
sha1_name: refactor reinterpret()
sha1_name: check @{-N} errors sooner
sha1_name: reorganize get_sha1_basic()
sha1_name: don't waste cycles in the @-parsing loop
sha1_name: remove unnecessary braces
sha1_name: remove no-op
tests: at-combinations: @{N} versus HEAD@{N}
tests: at-combinations: increase coverage
tests: at-combinations: improve nonsense()
tests: at-combinations: check ref names directly
tests: at-combinations: simplify setup
|
|
White-spaces, missing braces, standardize --[no-]foo.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typing 'HEAD' is tedious, especially when we can use '@' instead.
The reason for choosing '@' is that it follows naturally from the
ref@op syntax (e.g. HEAD@{u}), except we have no ref, and no
operation, and when we don't have those, it makes sens to assume
'HEAD'.
So now we can use 'git show @~1', and all that goody goodness.
Until now '@' was a valid name, but it conflicts with this idea, so
let's make it invalid. Probably very few people, if any, used this name.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since much of the infrastructure does not work correctly with
unnormalized refnames, change check_refname_format() to reject them.
Similarly, change "git check-ref-format" to reject unnormalized
refnames by default. But add an option --normalize, which causes "git
check-ref-format" to normalize the refname before checking its format,
and print the normalized refname. This is exactly the behavior of the
old --print option, which is retained but deprecated.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allowing any refname component to end with ".lock" is looking for
trouble; for example,
$ git br foo.lock/bar
$ git br foo
fatal: Unable to create '[...]/.git/refs/heads/foo.lock': File exists.
Therefore, do not allow any refname component to end with ".lock".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also add tests of the new options. (Actually, one big reason to add
the new options is to make it easy to test check_ref_format(), though
the options should also be useful to other scripts.)
Interpret the result of check_ref_format() based on which types of
refnames are allowed. However, because check_ref_format() can only
return a single value, one test case is still broken. Specifically,
the case "git check-ref-format --onelevel '*'" incorrectly succeeds
because check_ref_format() returns CHECK_REF_FORMAT_ONELEVEL for this
refname even though the refname is also CHECK_REF_FORMAT_WILDCARD.
The type of check that leads to this failure is used elsewhere in
"real" code and could lead to bugs; it will be fixed over the next few
commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is an unimportant implementation detail that branches and tags are
stored somewhere under $GIT_DIR/refs directory. What is more important
is that branches live in refs/heads and tags live in refs/tags hierarchy
in the ref namespace.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is misleading to say that we pull refs from $GIT_DIR/refs/*, because we
may also consult the packed refs mechanism. These days we tend to treat
the "refs hierarchy" as more of an abstract namespace that happens to be
represented as $GIT_DIR/refs. At best, this is a minor inaccuracy, but at
worst it can confuse users who then look in $GIT_DIR/refs and find that it
is missing some of the refs they expected to see.
This patch drops most uses of "$GIT_DIR/refs/*", changing them into just
"refs/*", under the assumption that users can handle the concept of an
abstract refs namespace. There are a few things to note:
- most cases just dropped the $GIT_DIR/ portion. But for cases where
that left _just_ the word "refs", I changed it to "refs/" to help
indicate that it was a hierarchy. I didn't do the same for longer
paths (e.g., "refs/heads" remained, instead of becoming
"refs/heads/").
- in some cases, no change was made, as the text was explicitly about
unpacked refs (e.g., the discussion in git-pack-refs).
- In some cases it made sense instead to note the existence of packed
refs (e.g., in check-ref-format and rev-parse).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Fix typo in 1.6.6.2 release notes
Re-fix check-ref-format documentation mark-up
|
|
It is not double-backslash we forbid; backslashes are forbidden since
a4c2e699 (Disallow '\' in ref names, 2009-05-08)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The last item in the enumerated refname rule was mistakenly made into
a sub-item of the 7th one. It should be the 8th one in the list on its
own.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
* jn/show-normalized-refs:
check-ref-format: simplify --print implementation
git check-ref-format --print
Add tests for git check-ref-format
Conflicts:
Documentation/git-check-ref-format.txt
|
|
* jn/maint-1.6.3-check-ref-format-doc:
Documentation: describe check-ref-format --branch
|
|
Tolerating empty path components in ref names means each ref does
not have a unique name. This creates difficulty for porcelains
that want to see if two branches are equal. Add a helper associating
to each ref a canonical name.
If a user asks a porcelain to create a ref "refs/heads//master",
the porcelain can run "git check-ref-format --print refs/heads//master"
and only deal with "refs/heads/master" from then on.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unless one already knew, it was not obvious what sort of shorthand
"git check-ref-format --branch" expands. Explain it.
The --branch argument is not optional.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rr/forbid-bs-in-ref:
Disallow '\' in ref names
|
|
'git check-ref-format' checks for the presence of at least one '/', the
idea being that there should be no refs directly below 'refs/', so there
should be a category like 'heads/' or 'tags/' in a refname.
Try and make this clearer in the man page.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is asking for trouble since '\' is a directory separator in
Windows and thus may produce unpredictable results.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/name-branch:
Don't permit ref/branch names to end with ".lock"
check_ref_format(): tighten refname rules
strbuf_check_branch_ref(): a helper to check a refname for a branch
Fix branch -m @{-1} newname
check-ref-format --branch: give Porcelain a way to grok branch shorthand
strbuf_branchname(): a wrapper for branch name shorthands
Rename interpret/substitute nth_last_branch functions
Conflicts:
Documentation/git-check-ref-format.txt
|
|
We already skip over loose refs under $GIT_DIR/refs if the name
ends with ".lock", so creating a branch named "foo.lock" will not
appear in the output of "git branch", "git for-each-ref", nor will
its commit be considered reachable by "git rev-list --all".
In the latter case this is especially evil, as it may cause
repository corruption when objects reachable only through such a
ref are deleted by "git prune".
It should be reasonably safe to deny use of ".lock" as a ref suffix.
In prior versions of Git such branches would be "phantom branches";
you can create it, but you can't see it in "git branch" output.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes the rules for refnames to forbid:
(1) a refname that contains "@{" in it.
Some people and foreign SCM converter may have named their branches
as frotz@24 and we still want to keep supporting it.
However, "git branch frotz@{24}" is a disaster. It cannot even
checked out because "git checkout frotz@{24}" will interpret it as
"detach the HEAD at twenty-fourth reflog entry of the frotz branch".
(2) a refname that ends with a dot.
We already reject a path component that begins with a dot, primarily
to avoid ambiguous range interpretation. If we allowed ".B" as a
valid ref, it is unclear if "A...B" means "in dot-B but not in A" or
"either in A or B but not in both".
But for this to be complete, we need also to forbid "A." to avoid "in
B but not in A-dot". This was not a problem in the original range
notation, but we should have added this restriction when three-dot
notation was introduced.
Unlike "no dot at the beginning of any path component" rule, this
rule does not have to be "no dot at the end of any path component",
because you cannot abbreviate the tail end away, similar to you can
say "dot-B" to mean "refs/heads/dot-B".
For these reasons, it is not likely people created branches with these
names on purpose, but we have allowed such names to be used for quite some
time, and it is possible that people created such branches by mistake or
by accident.
To help people with branches with such unfortunate names to recover,
we still allow "branch -d 'bad.'" to delete such branches, and also allow
"branch -m bad. good" to rename them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command may not be the best place to add this new feature, but
$ git check-ref-format --branch "@{-1}"
allows Porcelains to figure out what branch you were on before the last
branch switching.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All should be clear enough, except perhaps committish / commitish.
I just kept the more-used one within the current docs.
[jc: with rephrasing of check-ref-format description later discussed
on the list]
Signed-off-by: Francis Daly <francis@daoine.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
With the new cat-file syntax of 'v1.3.3:refs.c' we should mention
it as part of the reason why ':' is not permitted in a ref name.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
by marking '?', '*', and '[' as bad_ref_char().
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Felipe Contreras
Junio C Hamano
Thomas Ackermann
Jeff King
Michael Haggerty
Jonathan Nieder
Michael J Gruber
Thomas Rast
Robin Rosenberg
Shawn O. Pearce
David J. Mellor
Jonathan Nieder
Christian Couder
Dan McGee
Francis Daly
Fredrik Kuivinen
Junio C Hamano