| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Not necessarily every bundle file can be cloned from. Only the ones
that do not need prerequisites can.
When 1d52b02 (Documentation: minor grammatical fixes and rewording
in git-bundle.txt, 2009-03-22) reworded this paragraph, it lost a
critical hint to tell readers why this particular bundle can be
cloned from. Resurrect it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because the bundle created in the example does not record HEAD, "git
clone" will not check out the files to the working tree:
$ git clone pr.bundle q/
Cloning into 'q'...
Receiving objects: 100% (619/619), 13.52 MiB | 18.74 MiB/s, done.
Resolving deltas: 100% (413/413), done.
warning: remote HEAD refers to nonexistent ref, unable to checkout.
Avoid alarming the readers by adding "-b master" to the example. A
better fix may be to arrange the bundle created in the earlier step
to record HEAD, so that it can be cloned without this workaround.
Signed-off-by: Brilliantov Kirill Vladimirovich <brilliantov@inbox.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, one could think that 'git bundle create' groks
any 'git rev-list' expression. But in fact it requires a named reference
to be present. Try and make this clearer.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use tabs, not 7 spaces.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cleanup various spellings of the same argument, as well as the code
for the tilde: Since neither '~' nor '\~' work consistently, use
'{tilde}'.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
A git bundle can be transported by several means (such as e-mail), not
only by snekaernet, so use e.g. instead of i.e.
The mix-up in git-bundle.txt is obvious.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit also converts all reference specifications to a monospaced font,
as the embedded ~ character used in some of the references sometimes causes
the text up to the next ~ to be displayed incorrectly as a subscript when the
HTML pages are generated. This was tested with asciidoc 8.2.5.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although it does not matter in general it is handled different by
"git clone", as it removes it to make the "humanish" name of the
new repository.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This rewrites the example part of the bundle doucmentation to follow
the suggestion made by Junio during a recent discussion (gmane 108030).
Instead of just showing different ways to create and use bundles in a
disconnected fashion, the rewritten example first shows the simplest
"full cycle" of sneakernet workflow, and then introduces various
variations.
The words are mostly taken from Junio's outline. I only reformatted
them and proofread to make sure the end result flows naturally.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The <git-rev-list args> are mandatory to git bundle create, not
optional. The usage output of git bundle is already right on this.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Multiple commands were displayed in one line, making the manpage hard to read.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some workflows require use of repositories on machines that cannot be
connected, preventing use of git-fetch / git-push to transport objects and
references between the repositories.
git-bundle provides an alternate transport mechanism, effectively allowing
git-fetch and git-pull to operate using sneakernet transport. `git-bundle
create` allows the user to create a bundle containing one or more branches
or tags, but with specified basis assumed to exist on the target
repository. At the receiving end, git-bundle acts like git-fetch-pack,
allowing the user to invoke git-fetch or git-pull using the bundle file as
the URL. git-fetch and git-ls-remote determine they have a bundle URL by
checking that the URL points to a file, but are otherwise unchanged in
operation with bundles.
The original patch was done by Mark Levedahl <mdl123@verizon.net>.
It was updated to make git-bundle a builtin, and get rid of the tar
format: now, the first line is supposed to say "# v2 git bundle", the next
lines either contain a prerequisite ("-" followed by the hash of the
needed commit), or a ref (the hash of a commit, followed by the name of
the ref), and finally the pack. As a result, the bundle argument can be
"-" now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Kirill Brilliantov
Jeff King
Ralf Wildenhues
Štěpán Němec
Michael J Gruber
Thomas Rast
David J. Mellor
Santi Béjar
Nanako Shiraishi
Jonathan Nieder
Christian Couder
Gerrit Pape
Santi Béjar
Dan McGee
Miklos Vajna
Matthias Kestenholz
Michael Coleman
Johannes Schindelin