| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The description of the option gave impression that there
were several formats available by using three dots. There are
no other formats than tar and gzip currently supported.
Clarify that the archive goes to the standard output.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted by Mike Hommey, the documentation for the config setting tar.umask
is not up-to-date. Commit f08b3b0e2e9ad87767d80ff03b013c686e08ba4b changed
the default from 0 to 2; this patch finally documents it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In several of the text messages, the tense of the verb is inconsistent.
For example, "Add" vs "Creates". It is customary to use imperative for
command description.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: Reformatted SYNOPSIS for several commands
Documentation: Added [verse] to SYNOPSIS where necessary
|
|
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
Update git-config documentation
Fix unmatched emphasis tag in git-tutorial
Update git-cherry-pick documentation
Update git-archive documentation
|
|
Documentation/git-archive.txt: Document -v/--verbose option.
Add -l as short form of --list.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As noted by Junio, --format=tar should be assumed if no format
was specified.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also reorders a handful entries to make each list sorted
alphabetically.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch documents zip backend options.
It also adds git-archive command into the main git manual
page.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-archive is a command to make TAR and ZIP archives of a git tree.
It helps prevent a proliferation of git-{format}-tree commands.
Instead of directly calling git-{tar,zip}-tree command, it defines
a very simple API, that archiver should implement and register in
"git-archive.c". This API is made up by 2 functions whose prototype
is defined in "archive.h" file.
- The first one is used to parse 'extra' parameters which have
signification only for the specific archiver. That would allow
different archive backends to have different kind of options.
- The second one is used to ask to an archive backend to build
the archive given some already resolved parameters.
The main reason for making this API is to avoid using
git-{tar,zip}-tree commands, hence making them useless. Maybe it's
time for them to die ?
It also implements remote operations by defining a very simple
protocol: it first sends the name of the specific uploader followed
the repository name (git-upload-tar git://example.org/repo.git).
Then it sends options. It's done by sending a sequence of one
argument per packet, with prefix "argument ", followed by a flush.
The remote protocol is implemented in "git-archive.c" for client
side and is triggered by "--remote=<repo>" option. For example,
to fetch a TAR archive in a remote repo, you can issue:
$ git archive --format=tar --remote=git://xxx/yyy/zzz.git HEAD
We choose to not make a new command "git-fetch-archive" for example,
avoind one more GIT command which should be nice for users (less
commands to remember, keeps existing --remote option).
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Jonathan Nieder
Stephan Beyer
Christian Couder
Dan McGee
Michele Ballabio
Jari Aalto
René Scharfe
william pursell
Junio C Hamano
Matthias Kestenholz
Andrew Ruder
Franck Bui-Huu