| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
White-spaces, missing braces, standardize --[no-]foo.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make it a bit clearer that --worktree-attributes is about files in the
working tree (checked out files, possibly changed) and not the current
working directory ($PWD). Link to the ATTRIBUTES section, which has
more details.
Reported-by: Amit Bakshi <ambakshi@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many examples of git command invocation are given in asciidoc listing
blocks, which makes them monospaced and avoids further interpretation of
special characters. Some manpages make a list of examples, like:
git foo::
Run git foo.
git foo -q::
Use the "-q" option.
to quickly show many variants. However, they can sometimes be hard to
read, because they are shown in a proportional-width font (so, for
example, seeing the difference between "-- foo" and "--foo" can be
difficult).
This patch puts all such examples into backticks, which gives the
equivalent formatting to a listing block (i.e., monospaced and without
character interpretation).
As a bonus, this also fixes an example in the git-push manpage, in which
"git push origin :::" was accidentally considered a newly-indented list,
and not a list item with "git push origin :" in it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tar filters may be very expensive to run, so sites do
not want to expose them via upload-archive. This patch lets
users configure tar.<filter>.remote to turn them off.
By default, gzip filters are left on, as they are about as
expensive as creating zip archives.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This works exactly as if the user had configured it via:
[tar "tgz"]
command = gzip -cn
[tar "tar.gz"]
command = gzip -cn
but since it is so common, it's convenient to have it
builtin without the user needing to do anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's common to pipe the tar output produce by "git archive"
through gzip or some other compressor. Locally, this can
easily be done by using a shell pipe. When requesting a
remote archive, though, it cannot be done through the
upload-archive interface.
This patch allows configurable tar filters, so that one
could define a "tar.gz" format that automatically pipes tar
output through gzip.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
archive: document limitation of tar.umask config setting
t3306,t5304: avoid clock skew issues
git.txt: fix list continuation
|
|
The local value of the config variable tar.umask is not passed to the
other side with --remote. We may want to change that, but for now just
document this fact.
Reported-by: Jacek Masiulaniec <jacek.masiulaniec@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
* maint-1.7.2:
Documentation/githooks: post-rewrite-copy-notes never existed
Documentation/git-archive: spell --worktree-attributes correctly
|
|
The --worktree-attributes option was correctly documented in ba053ea
(archive: do not read .gitattributes in working directory,
2009-04-18). However, later in 9b4c8b0 (archive documentation:
attributes are taken from the tree by default, 2010-02-10) the
misspelling "--work-tree-attributes" was used to refer to it. Fix
this.
Noticed-by: Jeffrey Phillips Freeman <jeffrey.freeman@syncleus.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, git-archive takes attributes from the tree being archived.
People however often wonder why their attempts to affect the way how the
command archives their tree by changing .gitattributes in their work tree
fail.
Add a bit of explanatory note to tell them how to achieve what they want
to do.
Noticed-by: Francois Marier
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
Mention that path parameters are based on the current working directory.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
--
Documentation/git-archive.txt | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A command line
$ git archive -o my-v2.0.zip v2.0
almost certainly wants the output in zip format, even though it does not
specify any --format option.
When --format is not given, but output filename is, try to infer what
format is requested from the filename extension. Currently this code only
knows about '.zip'. When the format is unspecified and the filename does
not tell us, the output will be in 'tar' format as before.
Of course, an explicit --format will not trigger this guesswork.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The '-o' option is commonly used in many tools to specify the output file.
Typing '--output' every time is a bit too long to be a practical alternative
to redirecting output. But specifying the output name has the advantage of
making possible to guess the desired output format by filename extension.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.6.2:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
Conflicts:
Documentation/git-archive.txt
|
|
* maint-1.6.1:
Documentation: git-archive: mark --format as optional in summary
|
|
The --format option was made optional in 8ff21b1 (git-archive: make
tar the default format, 2007-04-09), but it was not marked as optional
in the summary. This trival patch just changes the summary to match
the rest of the documentation.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old behaviour still remains with --worktree-attributes, and it is
always on for the legacy "git tar-tree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dm/maint-docco:
Documentation: reword example text in git-bisect.txt.
Documentation: reworded the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-branch.txt.
Documentation: minor grammatical fixes in git-blame.txt.
Documentation: reword the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-archive.txt.
|
|
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When archiving a repository there is no way to specify a file as output.
This patch adds a new option "--output" that redirects the output to a
file instead of stdout.
Signed-off-by: Carlos Manuel Duclos Vergara <carlos.duclos@nokia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Roy Lee <roylee17@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The description of the option gave impression that there
were several formats available by using three dots. There are
no other formats than tar and gzip currently supported.
Clarify that the archive goes to the standard output.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted by Mike Hommey, the documentation for the config setting tar.umask
is not up-to-date. Commit f08b3b0e2e9ad87767d80ff03b013c686e08ba4b changed
the default from 0 to 2; this patch finally documents it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In several of the text messages, the tense of the verb is inconsistent.
For example, "Add" vs "Creates". It is customary to use imperative for
command description.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: Reformatted SYNOPSIS for several commands
Documentation: Added [verse] to SYNOPSIS where necessary
|
|
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
Update git-config documentation
Fix unmatched emphasis tag in git-tutorial
Update git-cherry-pick documentation
Update git-archive documentation
|
|
Documentation/git-archive.txt: Document -v/--verbose option.
Add -l as short form of --list.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As noted by Junio, --format=tar should be assumed if no format
was specified.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also reorders a handful entries to make each list sorted
alphabetically.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch documents zip backend options.
It also adds git-archive command into the main git manual
page.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-archive is a command to make TAR and ZIP archives of a git tree.
It helps prevent a proliferation of git-{format}-tree commands.
Instead of directly calling git-{tar,zip}-tree command, it defines
a very simple API, that archiver should implement and register in
"git-archive.c". This API is made up by 2 functions whose prototype
is defined in "archive.h" file.
- The first one is used to parse 'extra' parameters which have
signification only for the specific archiver. That would allow
different archive backends to have different kind of options.
- The second one is used to ask to an archive backend to build
the archive given some already resolved parameters.
The main reason for making this API is to avoid using
git-{tar,zip}-tree commands, hence making them useless. Maybe it's
time for them to die ?
It also implements remote operations by defining a very simple
protocol: it first sends the name of the specific uploader followed
the repository name (git-upload-tar git://example.org/repo.git).
Then it sends options. It's done by sending a sequence of one
argument per packet, with prefix "argument ", followed by a flush.
The remote protocol is implemented in "git-archive.c" for client
side and is triggered by "--remote=<repo>" option. For example,
to fetch a TAR archive in a remote repo, you can issue:
$ git archive --format=tar --remote=git://xxx/yyy/zzz.git HEAD
We choose to not make a new command "git-fetch-archive" for example,
avoind one more GIT command which should be nice for users (less
commands to remember, keeps existing --remote option).
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Felipe Contreras
René Scharfe
Thomas Ackermann
Jeff King
Jeff King
Junio C Hamano
Thomas Rast
Štěpán Němec
Dmitry Potapov
Wesley J. Landaker
Nguyễn Thái Ngọc Duy
David J. Mellor
Carlos Manuel Duclos Vergara
Roy Lee
Jonathan Nieder
Stephan Beyer
Christian Couder
Dan McGee
Michele Ballabio
Jari Aalto
william pursell
Junio C Hamano
Matthias Kestenholz
Andrew Ruder
Franck Bui-Huu