summaryrefslogtreecommitdiff
path: root/Documentation/git-apply.txt
AgeCommit message (Collapse)AuthorFilesLines
2006-11-18git-apply: Documentation typo fixLibravatar Petr Baudis1-1/+1
inacurate -> inaccurate, sorry if it was a pun. ;-) Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-17git-apply(1): document --unidiff-zeroLibravatar Jonas Fonseca1-0/+10
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-07Make apply --binary a no-op.Libravatar Junio C Hamano1-9/+4
Historically we did not allow binary patch applied without an explicit permission from the user, and this flag was the way to do so. This makes the flag a no-op by always allowing binary patch application. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-27Merge branch 'jc/apply'Libravatar Junio C Hamano1-2/+2
* jc/apply: git-apply --reject: finishing touches. apply --reject: count hunks starting from 1, not 0 git-apply --verbose git-apply --reject: send rejects to .rej files. git-apply --reject apply --reverse: tie it all together. diff.c: make binary patch reversible. builtin-apply --reverse: two bugfixes.
2006-08-27git-apply --reject: finishing touches.Libravatar Junio C Hamano1-2/+2
After a failed "git am" attempt: git apply --reject --verbose .dotest/patch applies hunks that are applicable and leaves *.rej files the rejected hunks, and it reports what it is doing. With --index, files with a rejected hunk do not get their index entries updated at all, so "git diff" will show the hunks that successfully got applied. Without --verbose to remind the user that the patch updated some other paths cleanly, it is very easy to lose track of the status of the working tree, so --reject implies --verbose. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-25git-apply(1): document missing options and improve existing onesLibravatar Jonas Fonseca1-7/+39
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-17git-apply --rejectLibravatar Junio C Hamano1-1/+8
With the new flag "--reject", hunks that do not apply are sent to the standard output, and the usable hunks are applied. The command itself exits with non-zero status when this happens, so that the user or wrapper can take notice and sort the remaining mess out. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-16apply --reverse: tie it all together.Libravatar Junio C Hamano1-1/+5
Add a few tests, usage string, and documentation. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-07Misc doc improvementsLibravatar Jonas Fonseca1-1/+1
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-03Documentation: Spelling fixesLibravatar Horst H. von Brand1-1/+1
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-10Implement limited context matching in git-apply.Libravatar Eric W. Biederman1-1/+7
Ok this really should be the good version. The option handling has been reworked to be automation safe. Currently to import the -mm tree I have to work around git-apply by using patch. Because some of Andrews patches in quilt will only apply with fuzz. I started out implementing a --fuzz option and then I realized fuzz is not a very safe concept for an automated system. What you really want is a minimum number of context lines that must match. This allows policy to be set without knowing how many lines of context a patch actually provides. By default the policy remains to match all provided lines of context. Allowng git-apply to match a restricted set of context makes it much easier to import the -mm tree into git. I am still only processing 1.5 to 1.6 patches a second for the 692 patches in 2.6.17-rc1-mm2 is still painful but it does help. If I just loop through all of Andrews patches in order and run git-apply --index -C1 I process the entire patchset in 1m53s or about 6 patches per second. So running git-mailinfo, git-write-tree, git-commit-tree, and git-update-ref everytime has a measurable impact, and shows things can be speeded up even more. All of these timings were taking on my poor 700Mhz Athlon with 512MB of ram. So people with fast machiens should see much better performance. When a match is found after the number of context are reduced a warning is generated. Since this is a rare event and possibly dangerous this seems to make sense. Unless you are patching a single file the error message is a little bit terse at the moment, but it should be easy to go back and fix. I have also updated the documentation for git-apply to reflect the new -C option that sets the minimum number of context lines that must match. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-02war on whitespaces: documentation.Libravatar Junio C Hamano1-0/+30
We were missing the --whitespace option in the usage string for git-apply and git-am, so this commit adds them. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-31Make apply accept the -pNUM option like patch does.Libravatar Daniel Barkalow1-1/+5
This only applies to traditional diffs, not to git diffs. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-05Wrap synopsis lines and use [verse] to keep formattingLibravatar Jonas Fonseca1-1/+4
In addition, also fixes a few synopses to be more consistent and a gitlink. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-16GIT 0.99.9j aka 1.0rc3Libravatar Junio C Hamano1-1/+12
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-11Documentation: git-apply --no-addLibravatar Junio C Hamano1-1/+7
This is a specialized hack to help no-base merges, but other people might find it useful, so let's document it. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-28git-apply --numstatLibravatar Junio C Hamano1-1/+7
The new option, --numstat, shows number of inserted and deleted lines for each path. It is similar to --stat output but is meant to be more machine friendly by giving number of added and deleted lines and unabbreviated paths. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-17git-apply: remove unused --show-files flag.Libravatar Junio C Hamano1-4/+1
Linus says he does not use it (and the thinking behind its initial introduction), and neither Cogito nor StGIT uses it. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-17Update documentation for C-style quoting.Libravatar Junio C Hamano1-1/+15
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Convert usage of GIT and Git into gitLibravatar Christian Meder1-1/+1
Convert usage of GIT and Git into git. Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-05Merge branch 'fixes'Libravatar Junio C Hamano1-1/+1
2005-10-05Some typos and light editing of various manpagesLibravatar Christian Meder1-1/+1
Typos, light editing and clarifications. Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-04git-apply: retire unused/unimplemented --no-merge flag.Libravatar Junio C Hamano1-6/+1
The original plan was to do 3-way merge between local working tree, index and the patch being applied, but that was never implemented. Retire the flag to control its behaviour. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-13[PATCH] apply: match documentation, usage string and code.Libravatar Junio C Hamano1-12/+16
The more recent --apply option was not described. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22[PATCH] git-apply: documentation.Libravatar Junio C Hamano1-0/+72
Add missing documentation for git-apply. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 19:24:12 +0000