summaryrefslogtreecommitdiff
path: root/Documentation/git-am.txt
AgeCommit message (Collapse)AuthorFilesLines
2010-03-10Merge branch 'sh/am-keep-cr'Libravatar Junio C Hamano1-1/+8
* sh/am-keep-cr: git-am: Add tests for `--keep-cr`, `--no-keep-cr` and `am.keepcr` git-am: Add am.keepcr and --no-keep-cr to override it git-am: Add command line parameter `--keep-cr` passing it to git-mailsplit documentation: 'git-mailsplit --keep-cr' is not hidden anymore
2010-03-04Merge branch 'maint-1.6.6' into maintLibravatar Junio C Hamano1-1/+1
* maint-1.6.6: Remove extra '-' from git-am(1)
2010-03-04Remove extra '-' from git-am(1)Libravatar Michal Sojka1-1/+1
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-28git-am: Add am.keepcr and --no-keep-cr to override itLibravatar Stefan-W. Hahn1-2/+4
This patch adds the configuration `am.keepcr` for git-am. It also adds `--no-keep-cr` parameter for git-am to give the possibility to override configuration from command line. Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-28git-am: Add command line parameter `--keep-cr` passing it to git-mailsplitLibravatar Stefan-W. Hahn1-1/+6
c2ca1d7 (Allow mailsplit (and hence git-am) to handle mails with CRLF line-endings, 2009-08-04) fixed "git mailsplit" to help people with MUA whose output from save-as command uses CRLF as line terminators by stripping CR at the end of lines. However, when you know you are feeding output from "git format-patch" directly to "git am", and especially when your contents have CR at the end of line, such stripping is undesirable. To help such a use case, teach --keep-cr option to "git am" and pass that to "git mailinfo". Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-11am: switch --resolved to --continueLibravatar Jeff King1-1/+2
Rebase calls this same function "--continue", which means users may be trained to type it. There is no reason to deprecate --resolved (or -r), so we will keep it as a synonym. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-5/+5
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2009-09-11add documentation for mailinfo.scissors and '--no-scissors'Libravatar Nicolas Sebrecht1-1/+4
Signed-off-by: Nicolas Sebrecht <nicolas.s.dev@gmx.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-26am/mailinfo: Disable scissors processing by defaultLibravatar Junio C Hamano1-11/+6
You can enable it by giving --scissors to "git am". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-26Documentation: describe the scissors mark support of "git am"Libravatar Nanako Shiraishi1-4/+12
Describe what a scissors mark looks like, and explain in what situation it is often used. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-05git apply: option to ignore whitespace differencesLibravatar Giuseppe Bilotta1-1/+4
Introduce --ignore-whitespace option and corresponding config bool to ignore whitespace differences while applying patches, akin to the 'patch' program. 'git am', 'git rebase' and the bash git completion are made aware of this option. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-18am, rebase: teach quiet optionLibravatar Stephen Boyd1-1/+5
git-am and git-rebase are talkative scripts. Teach them to be quiet when told, allowing them to speak only when they fail or experience errors. The quiet option is maintained when git-am or git-rebase fails to apply a patch. This means subsequent --resolved, --continue, --skip, --abort invocations will be quiet if the original invocation was quiet. Drop a handful of >&2 redirection; the rest of the program sends all the info messages to stdout, not to stderr. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-05git-am.txt: reword extra headers in message bodyLibravatar Stephen Boyd1-4/+4
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-05git-am.txt: Use date or value instead of time or timestampLibravatar Stephen Boyd1-4/+4
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-05git-am.txt: add an 'a', say what 'it' is, simplify a sentenceLibravatar Stephen Boyd1-6/+6
It's nice to know that 'it' is git-am or the subject line. Whitespace implies characters so just remove characters. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-02Documentation: minor grammatical fixes.Libravatar David J. Mellor1-18/+18
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-25git-am: Add --ignore-date optionLibravatar Nanako Shiraishi1-1/+16
This new option tells 'git-am' to ignore the date header field recorded in the format-patch output. The commits will have the timestamp when they are created instead. You can work a lot in one day to accumulate many changes, but apply and push to the public repository only some of them at the end of the first day. Then next day you can spend all your working hours reading comics or chatting with your coworkers, and apply your remaining patches from the previous day using this option to pretend that you have been working at the end of the day. Signed-off-by: しらいしななこ <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-23git-am: implement --reject option passed to git-applyLibravatar martin f. krafft1-0/+2
With --reject, git-am simply passes the --reject option to git-apply and thus allows people to work with reject files if they so prefer. Signed-off-by: martin f. krafft <madduck@madduck.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-12git-am: add --directory=<dir> optionLibravatar Junio C Hamano1-5/+2
Thanks to a200337 (git-am: propagate -C<n>, -p<n> options as well, 2008-12-04) and commits around it, "git am" is equipped to correctly propagate the command line flags such as -C/-p/-whitespace across a patch failure and restart. It is trivial to support --directory option now, resurrecting previous attempts by Kevin and Simon. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-16git-am: ignore --binary optionLibravatar Stephan Beyer1-6/+1
The git-apply documentation says that --binary is a historical option. This patch lets git-am ignore --binary and removes advertisements of this option. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21Rename .git/rebase to .git/rebase-applyLibravatar Johannes Schindelin1-2/+2
With git-am, it sounds awkward to have the patches in ".git/rebase/", but for technical reasons, we have to keep the same directory name for git-am and git-rebase. ".git/rebase-apply" seems to be a good compromise. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21Update my e-mail addressLibravatar Junio C Hamano1-1/+1
The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-19git am --abortLibravatar Nanako Shiraishi1-1/+4
After failing to apply patches in the middle of a series, "git am --abort" lets you go back to the original commit. [jc: doc/help update from Olivier, and fixups for "am -3" squashed in] Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Olivier Marin <dkr@freesurf.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-15Rename ".dotest/" to ".git/rebase" and ".dotest-merge" to "rebase-merge"Libravatar Johannes Schindelin1-2/+2
Since the files generated and used during a rebase are never to be tracked, they should live in $GIT_DIR. While at it, avoid the rather meaningless term "dotest" to "rebase", and unhide ".dotest-merge". This was wished for on the mailing list, but so far unimplemented. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-14Merge branch 'jc/rebase-orig-head'Libravatar Junio C Hamano1-0/+6
* jc/rebase-orig-head: Documentation: mention ORIG_HEAD in am, merge, and rebase Teach "am" and "rebase" to mark the original position with ORIG_HEAD
2008-07-13git-am/git-mailsplit: correct synopsis for reading from stdinLibravatar Stephan Beyer1-2/+2
Invoking git-am or git-mailsplit without mbox or Maildir results in reading an mbox from stdin. Mention this in the synopsis and usage strings. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-08Documentation: mention ORIG_HEAD in am, merge, and rebaseLibravatar Brian Gernhardt1-0/+6
Merge has always set ORIG_HEAD but never mentioned it, while we recently added it to am and rebase. These facts should be reflected in the documentation. git-reset also sets ORIG_HEAD, but that fact is already mentioned in the very first example so no changes were needed there. Signed-off-by: Brian Gernhardt <benji@silverinsanity.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-7/+7
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-2/+2
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-8/+16
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-05am: remove support for -d .dotestLibravatar Junio C Hamano1-5/+1
It has been supported for a long time, but I do not think this feature has been in use in the real world at all. We would eventually move this out of the toplevel of the work tree and to somewhere under $GIT_DIR, so let's remove the command line option to specify the location now. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-25Documentation/git-am.txt: Pass -r in the example invocation of rm -f .dotestLibravatar Bryan Donlan1-1/+1
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-8/+8
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-02Merge branches 'lh/submodules' and 'pb/am'Libravatar Junio C Hamano1-3/+2
* lh/submodules: Add basic test-script for git-submodule Add git-submodule command * pb/am: Remove git-applypatch git-applymbox: Remove command
2007-06-02Fix git-am(1) synopsis formattingLibravatar Jonas Fonseca1-1/+0
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-24Remove git-applypatchLibravatar Junio C Hamano1-1/+1
The previous one removed git-applymbox, which was the sole user of this tool. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-24git-applymbox: Remove commandLibravatar Petr Baudis1-3/+2
I believe noone uses git-applymbox, and noone definitely should, since it is supposed to be completely superseded and everything by its younger cousin git-am. The only known person in the universe to use it was Linus and he declared some time ago that he will try to use git-am instead in his famous dotest script. The trouble is that git-applymbox existence creates confusing UI. I'm a bit like a recycled newbie to the git porcelain and *I* was confused by git-applymbox primitiveness until I've realized a while later that I'm of course using the wrong command. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-24Teach mailsplit about Maildir'sLibravatar Fernando J. Pereda1-3/+5
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-14git-am: Clean up the asciidoc documentationLibravatar Frank Lichtenheld1-16/+19
Add --keep to synopsis. The synopsys used a mix of tabs and spaces, unify to use only spaces. Shuffle options around in synopsys and description for grouping them logically. Add more gitlink references to other commands. Various grammatical fixes and improvements. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16Update git-am documentationLibravatar Andrew Ruder1-9/+16
Documentation/git-am.txt missing several short versions of options. Added documentation for --resolvemsg=<msg> command-line option. Signed-off-by: Andrew Ruder <andy@aeruder.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-24git-am documentation: describe what is taken from where.Libravatar Junio C Hamano1-0/+27
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-21fix typo in git-am manpageLibravatar Michael S. Tsirkin1-1/+1
Fix typo in git-am manpage Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-11Teach git-am to pass -p option down to git-applyLibravatar Junio C Hamano1-3/+4
This is originally from Andy Parkins whose patch used --patchdepth; let's use -p which is more in line with the underlying git-apply. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-11Document that git-am can read standard input.Libravatar Michael S. Tsirkin1-0/+4
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-08add -C[NUM] to git-amLibravatar Michael S. Tsirkin1-0/+4
Add -C[NUM] to git-am and git-rebase so that patches can be applied even if context has changed a bit. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-18Documentation: sync git.txt command list and manual page titleLibravatar Junio C Hamano1-1/+1
Also reorders a handful entries to make each list sorted alphabetically. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-08--utf8 is now default for 'git-am'Libravatar Junio C Hamano1-3/+16
Since we are talking about allowing potentially incompatible UI changes in v1.5.0 iff the change improves the general situation, I would say why not. There is --no-utf8 flag to avoid re-coding from botching the log message just in case, but we may not even need it. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-02war on whitespaces: documentation.Libravatar Junio C Hamano1-2/+7
We were missing the --whitespace option in the usage string for git-apply and git-am, so this commit adds them. Signed-off-by: Junio C Hamano <junkio@cox.net>