| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This mainly refers to enforcing indentation on additional lines of
items of lists.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When formatted as a man page, 1st section header is always in upper
case even if we write it otherwise. Make all 1st section headers
uppercase to keep it close to the final output.
This does affect html since case is kept there, but I still think it's
a good idea to maintain a consistent style for 1st section headers.
Some sections perhaps should become second sections instead, where
case is kept, and for better organization. I will update if anyone has
suggestions about this.
While at there I also make some header more consistent (e.g. examples
vs example) and fix a couple minor things here and there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make it safer to normalize the line endings in a repository.
Files that had been commited with CRLF will be commited with LF.
The old way to normalize a repo was like this:
# Make sure that there are not untracked files
$ echo "* text=auto" >.gitattributes
$ git read-tree --empty
$ git add .
$ git commit -m "Introduce end-of-line normalization"
The user must make sure that there are no untracked files,
otherwise they would have been added and tracked from now on.
The new "add --renormalize" does not add untracked files:
$ echo "* text=auto" >.gitattributes
$ git add --renormalize .
$ git commit -m "Introduce end-of-line normalization"
Note that "git add --renormalize <pathspec>" is the short form for
"git add -u --renormalize <pathspec>".
While at it, document that the same renormalization may be needed,
whenever a clean filter is added or changed.
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc updates.
* mr/doc-negative-pathspec:
docs: improve discoverability of exclude pathspec
|
|
The ability to exclude paths with a negative pathspec is not mentioned
in the man pages for git grep and other commands where it might be
useful.
Add an example and a pointer to the pathspec glossary entry in the man
page for git grep to help the user to discover this ability.
Add similar pointers from the git-add and git-status man pages.
Additionally,
- Add a test for the behaviour when multiple exclusions are present.
- Add a test for the ^ alias.
- Improve name of existing test.
- Improve grammar in glossary description of the exclude pathspec.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Manav Rathi <mnvrth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's an easy mistake to add a repository inside another
repository, like:
git clone $url
git add .
The resulting entry is a gitlink, but there's no matching
.gitmodules entry. Trying to use "submodule init" (or clone
with --recursive) doesn't do anything useful. Prior to
v2.13, such an entry caused git-submodule to barf entirely.
In v2.13, the entry is considered "inactive" and quietly
ignored. Either way, no clone of your repository can do
anything useful with the gitlink without the user manually
adding the submodule config.
In most cases, the user probably meant to either add a real
submodule, or they forgot to put the embedded repository in
their .gitignore file.
Let's issue a warning when we see this case. There are a few
things to note:
- the warning will go in the git-add porcelain; anybody
wanting to do low-level manipulation of the index is
welcome to create whatever funny states they want.
- we detect the case by looking for a newly added gitlink;
updates via "git add submodule" are perfectly reasonable,
and this avoids us having to investigate .gitmodules
entirely
- there's a command-line option to suppress the warning.
This is needed for git-submodule itself (which adds the
entry before adding any submodule config), but also
provides a mechanism for other scripts doing
submodule-like things.
We could make this a hard error instead of a warning.
However, we do add lots of sub-repos in our test suite. It's
not _wrong_ to do so. It just creates a state where users
may be surprised. Pointing them in the right direction with
a gentle hint is probably the best option.
There is a config knob that can disable the (long) hint. But
I intentionally omitted a config knob to disable the warning
entirely. Whether the warning is sensible or not is
generally about context, not about the user's preferences.
If there's a tool or workflow that adds gitlinks without
matching .gitmodules, it should probably be taught about the
new command-line option, rather than blanket-disabling the
warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git add --chmod option was introduced in 4e55ed3 ("add: add
--chmod=+x / --chmod=-x options", 2016-05-31), but was never
documented. Document the feature.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The usage of working directory is inconsistent in the git add help.
Also http://git-scm.com/docs/git-clone speaks only about working tree.
Remaining entry found by "git grep -B1 '^directory' git-add.txt" really
relates to a directory.
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various documentation mark-up fixes to make the output more
consistent in general and also make AsciiDoctor (an alternative
formatter) happier.
* jk/asciidoc-markup-fix:
doc: convert AsciiDoc {?foo} to ifdef::foo[]
doc: put example URLs and emails inside literal backticks
doc: drop backslash quoting of some curly braces
doc: convert \--option to --option
doc/add: reformat `--edit` option
doc: fix length of underlined section-title
doc: fix hanging "+"-continuation
doc: fix unquoted use of "{type}"
doc: fix misrendering due to `single quote'
|
|
All of the other options in the list put short and long as
two separate headings.
We can also drop the backslashing of `--`. It isn't used
elsewhere and is unnecessary for modern asciidoc (plus it
confuses asciidoctor).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
|
|
Signed-off-by: Justin Lebar <jlebar@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add <pathspec>" is the same as "git add -A <pathspec>" now,
i.e. it does not ignore removals from the directory specified.
|
|
As promised in 0fa2eb530fb7 (add: warn when -u or -A is used without
pathspec, 2013-01-28), in Git 2.0, "git add -u/-A" that is run
without pathspec in a subdirectory updates all updated paths in the
entire working tree, not just the current directory and its
subdirectories.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make "git add <pathspec>..." notice paths that have been removed
from the working tree, i.e. the same as "git add -A <pathspec>...".
Given that "git add <pathspec>" is to update the index with the
state of the named part of the working tree as a whole, it makes it
more intuitive, and also makes it possible to simplify the advice we
give while marking the paths the user finished resolving conflicts
with. We used to say "to record removal as a resolution, remove the
path from the working tree and say 'git rm'; for all other cases,
edit the path in the working tree and say 'git add'", but we can now
say "update the path in the working tree and say 'git add'" instead.
As promised, this merges the temporary update_files_in_cache() helper
function back to add_files_to_cache() function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the historical context of "git add --all ." that pays attention
to "all kinds of changes" (implying "without ignoring removals"),
the option to countermand it "--no-all" may have made sense, but
because we will be making "--all" the default when a pathspec is
given, it makes more sense to rename the option to a more explicit
"--ignore-removal". The "--all" option naturally becomes its
negation, "--no-ignore-removal".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git add subdir/" is run without "-u" or "-A" option, e.g.
$ edit subdir/x
$ create subdir/y
$ rm subdir/z
$ git add subdir/
the command does not notice removal of paths (e.g. subdir/z) from
the working tree. This sometimes confuses new people, as arguably
"git add" is told to record the current state of "subdir/" as a
whole, not the current state of the paths that exist in the working
tree that matches that pathspec (the latter by definition excludes
the state of "subdir/z" because it does not exist in the working
tree).
Plan to eventually make "git add" pretend as if "-A" is given when
there is a pathspec on the command line. When resolving a conflict
to remove a path, the current code tells you to "git rm $path", but
with such a change, you will be able to say "git add $path" (of
course you can do "git add -A $path" today). That means that we can
simplify the advice messages given by "git status". That all will
be in Git 2.0 or later, if we are going to do so.
For that transition to work, people need to learn either to say "git
add --no-all subdir/" when they want to ignore the removed paths
like "subdir/z", or to say "git add -A subdir/" when they want to
take the state of the directory as a whole.
"git add" without any argument will continue to be a no-op.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation of '-A' and '-u' is very confusing for someone who
doesn't already know what they do. Describe them with fewer words and
clearer parallelism to each other and to the behavior of plain 'add'.
Also mention the default <pathspec> for '-A' as well as '-u', because
it applies to both.
Signed-off-by: Greg Price <price@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The merge at 5bf72ed2 missed another instance of <filepattern> that
we were converting to <pathspec>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Replace filepattern with pathspec for consistency
|
|
pathspec is the most widely used term, and is the one defined in
gitglossary.txt. <filepattern> was used only in the synopsys for git-add
and git-commit, and in git-add.txt. Get rid of it.
This patch is obtained with by running:
perl -pi -e 's/filepattern/pathspec/' `git grep -l filepattern`
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most Git commands that can be used with or without pathspec operate
tree-wide by default, the pathspec being used to restrict their
scope. A few exceptions are: 'git grep', 'git clean', 'git add -u'
and 'git add -A'. When run in a subdirectory without pathspec, they
operate only on paths in the current directory.
The inconsistency of 'git add -u' and 'git add -A' is particularly
problematic since other 'git add' subcommands (namely 'git add -p'
and 'git add -e') are tree-wide by default. It also means that "git
add -u && git commit" will record a state that is different from
what is recorded with "git commit -a".
Flipping the default now is unacceptable, so let's start training
users to type 'git add -u|-A :/' or 'git add -u|-A .' explicitly, to
prepare for the next steps:
* forbid 'git add -u|-A' without pathspec (like 'git add' without
option)
* much later, maybe, re-allow 'git add -u|-A' without pathspec, that
will add all tracked and modified files, or all files, tree-wide.
A nice side effect of this patch is that it makes the :/ magic
pathspec easier to discover for users.
When the command is called from the root of the tree, there is no
ambiguity and no need to change the behavior, hence no need to warn.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a gitignore link rather than the gitrepository-
layout link.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* vh/config-interactive-singlekey-doc:
git-reset.txt: better docs for '--patch'
git-checkout.txt: better docs for '--patch'
git-stash.txt: better docs for '--patch'
git-add.txt: document 'interactive.singlekey'
config.txt: 'interactive.singlekey; is used by...
|
|
This is documented in the section about the 'Interactive Mode', rather than for
the option '--patch', since this is the section is where people go to learn
about '--patch'.
Helped-by: Jeff King <peff@peff.net>
Mentored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous text was not exactly accurate; it is OK to
change space and minus lines, but only in certain ways.
This patch takes a whole new approach, which is to describe
the sorts of conceptual operations you might want to
perform. It also includes a healthy dose of warnings about
how things can go wrong.
Since the size of the text is getting quite long, it also
splits this out into an "editing patches" section. This
makes more sense with the current structure, anyway, which
already splits out the interactive mode description.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous text was not exactly accurate; it is OK to
change space and minus lines, but only in certain ways. This
patch attempts to cover explicitly what can be done at the
individual line level, and cautions the user that
conceptually larger changes (like modifying a line) require
some understanding of the patch format.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-doc-em-dash:
Work around em-dash handling in newer AsciiDoc
|
|
Older versions of AsciiDoc used to literally pass double dashes when we
used them in our linkgit macros and manpage titles, but newer ones (the
issue was first reported with AsciiDoc 8.5.2) turn them into em dashes.
Define litdd (literal double-dash) custom attribute in asciidoc.conf to
work this around. While we are at it, fix a few double-dashes (e.g. the
description of "project--devo--version" convention used by tla, among
other things) that used to be incorrectly written as em dashes in the body
text to also use this attribute.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The intended text looks like this:
· Adds content from all *.txt files under Documentation
directory and its subdirectories:
$ git add Documentation/\*.txt
Note that the asterisk * is quoted from the shell in this
example; this lets the command include the files from
subdirectories of Documentation/ directory.
The current asciidoc 8.5.2 output has a backslash before _every_
asterisk, which is more confusing than it needs to be.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All the git add options were listed in the synopsis until the
--ignore-missing option was added. Change that so that the git add
documentation now has the complete listing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes it is useful to know if a file or directory will be ignored
before it is added to the work tree. An example is "git submodule add",
where it would be really nice to be able to fail with an appropriate
error message before the submodule is cloned and checked out.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "a" and "d" commands to ‘add --patch’ (accept/reject rest of file)
interact with "j", "g", and "/" (skip some hunks) in a perhaps
confusing way: after accepting or rejecting all _later_ hunks in the
file, they return to the earlier, skipped hunks and prompt the user
about them again.
This behavior can be very useful in practice. One can still accept or
reject _all_ undecided hunks in a file by using the "g" command to
move to hunk #1 first.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
blame: prevent a segv when -L given start > EOF
git-push: document all the status flags used in the output
Fix parsing of imap.preformattedHTML and imap.sslverify
git-add documentation: Fix shell quoting example
|
|
* jc/maint-doc-git-add-example:
git-add documentation: Fix shell quoting example
|
|
When 921177f (Documentation: improve "add", "pull" and "format-patch"
examples, 2008-05-07) converted this from enumeration header to displayed
text, it failed to adjust for the AsciiDoc's rule to quote backslashes.
In displayed text, backslash is shown verbatim, while in enumeration
header, we need to double it.
We have a similar construct in git-rm.txt documentation, and need to be
careful when somebody wants to update it to match the style of the "git
add" example.
Noticed by: Greg Bacon <gbacon@dbresearch.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use `code snippet` style instead of 'emphasis' for `git cmd ...`
according to the following rules:
* The SYNOPSIS sections are left untouched.
* If the intent is that the user type the command exactly as given, it
is `code`.
If the user is only loosely referred to a command and/or option, it
remains 'emphasised'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
Consistently back-quote commands, options and file names.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current documentation fails to mention that 'git add -A/--all' can
remove files as well as add them, and it also does not say anything about
filepatterns (whether they are allowed, mandatory, or optional). It is
also not clear what the similarities and differences to the -u option are.
Update the intro paragraph (as suggested by Junio, with some minor edits)
to make it clear that 'git add' is able to delete and to also cover the -p
option.
Reword the description of -u to make it clearer (based on Björn
Steinbrink's suggestion).
Simplify the description of -A by saying "Like -u" and then describe the
differences (based on the suggestions by Björn Steinbrink and Junio).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extra paragraphs should be prefixed with a plus sign.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
<filepattern>... is optional (e.g. when the --all or --update
options are used) so use square brackets in the synopsis.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/add-edit:
t3702: fix reliance on SHELL_PATH being '/bin/sh'
git-add: introduce --edit (to edit the diff vs. the index)
|
|
The text is merely cut-and-pasted from git-add--interactive.perl. The
cut-and-paste also fixes a typo.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's already 'd' to stop staging hunks in a file, but no explicit
command to stop the interactive staging (for the current files and the
remaining ones). Of course you can do 'd' and then ^C, but it would be
more intuitive to allow 'quit' action.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jean-Noël Avila
Nguyễn Thái Ngọc Duy
Torsten Bögershausen
Junio C Hamano
Manav Rathi
Jeff King
Thomas Gummerer
Lars Vogel
Alexander Kuleshov
Justin Lebar
Greg Price
Matthieu Moy
Philip Oakley
Valentin Haenel
Ralf Wildenhues
Jonathan Nieder
Ævar Arnfjörð Bjarmason
Jens Lehmann
Thomas Rast
Björn Gustavsson
Stephen Boyd
Jari Aalto
Paul Bolle