| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Teach fetch to optionally accept server options by specifying them on
the cmdline via '-o' or '--server-option'. These server options are
sent to the remote end when performing a fetch communicating using
protocol version 2.
If communicating using a protocol other than v2 the provided options are
ignored and not sent to the remote end.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a --prune-tags option to git-fetch, along with fetch.pruneTags
config option and a -P shorthand (-p is --prune). This allows for
doing any of:
git fetch -p -P
git fetch --prune --prune-tags
git fetch -p -P origin
git fetch --prune --prune-tags origin
Or simply:
git config fetch.prune true &&
git config fetch.pruneTags true &&
git fetch
Instead of the much more verbose:
git fetch --prune origin 'refs/tags/*:refs/tags/*' '+refs/heads/*:refs/remotes/origin/*'
Before this feature it was painful to support the use-case of pulling
from a repo which is having both its branches *and* tags deleted
regularly, and have our local references to reflect upstream.
At work we create deployment tags in the repo for each rollout, and
there's *lots* of those, so they're archived within weeks for
performance reasons.
Without this change it's hard to centrally configure such repos in
/etc/gitconfig (on servers that are only used for working with
them). You need to set fetch.prune=true globally, and then for each
repo:
git -C {} config --replace-all remote.origin.fetch "refs/tags/*:refs/tags/*" "^\+*refs/tags/\*:refs/tags/\*$"
Now I can simply set fetch.pruneTags=true in /etc/gitconfig as well,
and users running "git pull" will automatically get the pruning
semantics I want.
Even though "git remote" has corresponding "prune" and "update
--prune" subcommands I'm intentionally not adding a corresponding
prune-tags or "update --prune --prune-tags" mode to that command.
It's advertised (as noted in my recent "git remote doc: correct
dangerous lies about what prune does") as only modifying remote
tracking references, whereas any --prune-tags option is always going
to modify what from the user's perspective is a local copy of the tag,
since there's no such thing as a remote tracking tag.
Ideally add_prune_tags_to_fetch_refspec() would be something that
would use ALLOC_GROW() to grow the 'fetch` member of the 'remote'
struct. Instead I'm realloc-ing remote->fetch and adding the
tag_refspec to the end.
The reason is that parse_{fetch,push}_refspec which allocate the
refspec (ultimately remote->fetch) struct are called many places that
don't have access to a 'remote' struct. It would be hard to change all
their callsites to be amenable to carry around the bookkeeping
variables required for dynamic allocation.
All the other callers of the API first incrementally construct the
string version of the refspec in remote->fetch_refspec via
add_fetch_refspec(), before finally calling parse_fetch_refspec() via
some variation of remote_get().
It's less of a pain to deal with the one special case that needs to
modify already constructed refspecs than to chase down and change all
the other callsites. The API I'm adding is intentionally not
generalized because if we add more of these we'd probably want to
re-visit how this is done.
See my "Re: [BUG] git remote prune removes local tags, depending on
fetch config" (87po6ahx87.fsf@evledraar.gmail.com;
https://public-inbox.org/git/87po6ahx87.fsf@evledraar.gmail.com/) for
more background info.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Amend the documentation for fetch.prune, fetch.<name>.prune and
--prune to link to the recently added PRUNING section.
I'd have liked to link directly to it with "<<PRUNING>>" from
fetch-options.txt, since it's included in git-fetch.txt (git-pull.txt
also includes it, but doesn't include that option). However making a
reference across files yields this error:
[...]/Documentation/git-fetch.xml:226: element xref: validity
error : IDREF attribute linkend references an unknown ID "PRUNING"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
|
|
More mark-up updates to typeset strings that are expected to
literally typed by the end user in fixed-width font.
* mm/doc-tt:
doc: typeset HEAD and variants as literal
CodingGuidelines: formatting HEAD in documentation
doc: typeset long options with argument as literal
doc: typeset '--' as literal
doc: typeset long command-line options as literal
doc: typeset short command-line options as literal
Documentation/git-mv.txt: fix whitespace indentation
|
|
Similarly to the previous commit, use backquotes instead of
forward-quotes, for long options.
This was obtained with:
perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt
and manual tweak to remove false positive in ascii-art (o'--o'--o' to
describe rewritten history).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/fetch-prune-doc:
fetch: document that pruning happens before fetching
|
|
This was changed in 10a6cc8 (fetch --prune: Run prune before
fetching, 2014-01-02), but it seems that nobody in that
discussion realized we were advertising the "after"
explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git-fetch, --depth argument is always relative with the latest
remote refs. This makes it a bit difficult to cover this use case,
where the user wants to make the shallow history, say 3 levels
deeper. It would work if remote refs have not moved yet, but nobody
can guarantee that, especially when that use case is performed a
couple months after the last clone or "git fetch --depth". Also,
modifying shallow boundary using --depth does not work well with
clones created by --since or --not.
This patch fixes that. A new argument --deepen=<N> will add <N> more (*)
parent commits to the current history regardless of where remote refs
are.
Have/Want negotiation is still respected. So if remote refs move, the
server will send two chunks: one between "have" and "want" and another
to extend shallow history. In theory, the client could send no "want"s
in order to get the second chunk only. But the protocol does not allow
that. Either you send no want lines, which means ls-remote; or you
have to send at least one want line that carries deep-relative to the
server..
The main work was done by Dongcan Jiang. I fixed it up here and there.
And of course all the bugs belong to me.
(*) We could even support --deepen=<N> where <N> is negative. In that
case we can cut some history from the shallow clone. This operation
(and --depth=<shorter depth>) does not require interaction with remote
side (and more complicated to implement as a result).
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" and friends that make network connections can now be
told to only use ipv4 (or ipv6).
* ew/force-ipv4:
connect & http: support -4 and -6 switches for remote operations
|
|
Sometimes it is necessary to force IPv4-only or IPv6-only operation
on networks where name lookups may return a non-routable address and
stall remote operations.
The ssh(1) command has an equivalent switches which we may pass when
we run them. There may be old ssh(1) implementations out there
which do not support these switches; they should report the
appropriate error in that case.
rsync support is untouched for now since it is deprecated and
scheduled to be removed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation for "git fetch --depth" has been updated for clarity.
* ss/clone-depth-single-doc:
docs: clarify that --depth for git-fetch works with newly initialized repos
docs: say "commits" in the --depth option wording for git-clone
docs: clarify that passing --depth to git-clone implies --single-branch
|
|
The original wording sounded as if --depth could only be used to deepen or
shorten the history of existing repos. However, that is not the case. In a
workflow like
$ git init
$ git remote add origin https://github.com/git/git.git
$ git fetch --depth=1
The newly initialized repo is properly created as a shallow repo.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This enables the work of the previous patches.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the introduction of opportunisitic updates of remote-tracking
branches, started at around f2690487 (fetch: opportunistically
update tracking refs, 2013-05-11) with a few updates in v1.8.4 era,
the remote.*.fetch configuration always kicks in even when a refspec
to specify what to fetch is given on the command line, and there is
no way to disable or override it per-invocation.
Teach the command to pay attention to the --refmap=<lhs>:<rhs>
command-line options that can be used to override the use of
configured remote.*.fetch as the refmap.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
|
|
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
|
|
The same steps are done as in when --update-shallow is not given. The
only difference is we now add all shallow commits in "ours" and
"theirs" to .git/shallow (aka "step 8").
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "fetch --depth=N" where N exceeds the longest chain of history in
the source repo, usually we just send an "unshallow" line to the
client so full history is obtained.
When the source repo is shallow we need to make sure to "unshallow"
the current shallow point _and_ "shallow" again when the commit
reaches its shallow bottom in the source repo.
This should fix both cases: large <N> and --unshallow.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old behavior of "fetch --prune" was to prune whatever was being
fetched. In particular, "fetch --prune --tags" caused tags not only
to be fetched, but also to be pruned. This is inappropriate because
there is only one tags namespace that is shared among the local
repository and all remotes. Therefore, if the user defines a local
tag and then runs "git fetch --prune --tags", then the local tag is
deleted. Moreover, "--prune" and "--tags" can also be configured via
fetch.prune / remote.<name>.prune and remote.<name>.tagopt, making it
even less obvious that an invocation of "git fetch" could result in
tag lossage.
Since the command "git remote update" invokes "git fetch", it had the
same problem.
The command "git remote prune", on the other hand, disregarded the
setting of remote.<name>.tagopt, and so its behavior was inconsistent
with that of the other commands.
So the old behavior made it too easy to lose tags. To fix this
problem, change "fetch --prune" to prune references based only on
refspecs specified explicitly by the user, either on the command line
or via remote.<name>.fetch. Thus, tags are no longer made subject to
pruning by the --tags option or the remote.<name>.tagopt setting.
However, tags *are* still subject to pruning if they are fetched as
part of a refspec, and that is good. For example:
* On the command line,
git fetch --prune 'refs/tags/*:refs/tags/*'
causes tags, and only tags, to be fetched and pruned, and is
therefore a simple way for the user to get the equivalent of the old
behavior of "--prune --tag".
* For a remote that was configured with the "--mirror" option, the
configuration is set to include
[remote "name"]
fetch = +refs/*:refs/*
, which causes tags to be subject to pruning along with all other
references. This is the behavior that will typically be desired for
a mirror.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, fetch's "--tags" option was considered equivalent to
specifying the refspec "refs/tags/*:refs/tags/*" on the command line;
in particular, it caused the remote.<name>.refspec configuration to be
ignored.
But it is not very useful to fetch tags without also fetching other
references, whereas it *is* quite useful to be able to fetch tags *in
addition to* other references. So change the semantics of this option
to do the latter.
If a user wants to fetch *only* tags, then it is still possible to
specifying an explicit refspec:
git fetch <remote> 'refs/tags/*:refs/tags/*'
Please note that the documentation prior to 1.8.0.3 was ambiguous
about this aspect of "fetch --tags" behavior. Commit
f0cb2f137c 2012-12-14 fetch --tags: clarify documentation
made the documentation match the old behavior. This commit changes
the documentation to match the new behavior.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rr/maint-fetch-tag-doc-asterisks:
fetch-options.txt: prevent a wildcard refspec from getting misformatted
|
|
When explaining the "--tags" option as an equivalent to giving an
explicit "refs/tags/*:refs/tags/*" refspec, the two asterisks were
misinterpreted by AsciiDoc as a request to typeset the string
segment between them in bold.
We could fix it in two ways. We can replace them with {asterisk}s
while keeping the string as body text, or we can mark it as a
literal string with backquotes around it.
Let's do the latter, as it is teaching the user an "exactly as
typed" alternative.
Noticed-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--depth is explained as deepen, but the way it's applied, it can
shorten the history as well. Keen users may have noticed the
implication by the phrase "the specified number of commits from the
tip of each remote branch". Put "shorten" in the description to make
it clearer.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The user can do --depth=2147483647 (*) for restoring complete repo
now. But it's hard to remember. Any other numbers larger than the
longest commit chain in the repository would also do, but some
guessing may be involved. Make easy-to-remember --unshallow an alias
for --depth=2147483647.
Make upload-pack recognize this special number as infinite depth. The
effect is essentially the same as before, except that upload-pack is
more efficient because it does not have to traverse to the bottom
anymore.
The chance of a user actually wanting exactly 2147483647 commits
depth, not infinite, on a repository with a history that long, is
probably too small to consider. The client can learn to add or
subtract one commit to avoid the special treatment when that actually
happens.
(*) This is the largest positive number a 32-bit signed integer can
contain. JGit and older C Git store depth as "int" so both are OK
with this number. Dulwich does not support shallow clone.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Explain that --tags is just like another explicit refspec on the
command line and as such overrides the default refspecs configured
via the remote.$name.fetch variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clarify that 'depth=' specifies the new depth from the remote's
branch tip. It does not add the depth to the existing shallow clone.
(details from pack-protocol.txt).
Clarify that tags are not fetched. (details from shallow.txt)
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When looking for submodules where new commits have been recorded in the
superproject ignore those cases where the submodules commits are already
present locally. This can happen e.g. when the submodule has been rewound
to an earlier state. Then there is no need to fetch the submodule again
as the commit recorded in the newly fetched superproject commit has
already been fetched earlier into the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Until now the --recurse-submodules option could only be used to either
fetch all populated submodules recursively or to disable recursion
completely. As fetch and pull now by default just fetch those submodules
for which new commits have been fetched in the superproject, a command
line option to enforce that behavior is needed to be able to override
configuration settings.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To be able to access all commits of populated submodules referenced by the
superproject it is sufficient to only then let "git fetch" recurse into a
submodule when the new commits fetched in the superproject record new
commits for it. Having these commits present is extremely useful when
using the "--submodule" option to "git diff" (which is what "git gui" and
"gitk" do since 1.6.6), as all submodule commits needed for creating a
descriptive output can be accessed. Also merging submodule commits (added
in 1.7.3) depends on the submodule commits in question being present to
work. Last but not least this enables disconnected operation when using
submodules, as all commits necessary for a successful "git submodule
update -N" will have been fetched automatically. So we choose this mode as
the default for fetch and pull.
Before a new or changed ref from upstream is updated in update_local_ref()
"git rev-list <new-sha1> --not --branches --remotes" is used to determine
all newly fetched commits. These are then walked and diffed against their
parent(s) to see if a submodule has been changed. If that is the case, its
path is stored to be fetched after the superproject fetch is completed.
Using the "--recurse-submodules" or the "--no-recurse-submodules" option
disables the examination of the fetched refs because the result will be
ignored anyway.
There is currently no infrastructure for storing deleted and new
submodules in the .git directory of the superproject. That's why fetch and
pull for now only fetch submodules that are already checked out and are
not renamed.
In t7403 the "--no-recurse-submodules" argument had to be added to "git
pull" to avoid failure because of the moved upstream submodule repo.
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commits be254a0ea9 and 7dce19d374 the handling of the new fetch options
"--[no-]recurse-submodules" had been added to git-pull.sh. But they were
not documented as the pull options they now are, so let's fix that.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/fetch-submodule-recursive:
fetch_populated_submodules(): document dynamic allocation
Submodules: Add the "fetchRecurseSubmodules" config option
Add the 'fetch.recurseSubmodules' config setting
fetch/pull: Add the --recurse-submodules option
Conflicts:
builtin/fetch.c
|
|
* mm/phrase-remote-tracking:
git-branch.txt: mention --set-upstream as a way to change upstream configuration
user-manual: remote-tracking can be checked out, with detached HEAD
user-manual.txt: explain better the remote(-tracking) branch terms
Change incorrect "remote branch" to "remote tracking branch" in C code
Change incorrect uses of "remote branch" meaning "remote-tracking"
Change "tracking branch" to "remote-tracking branch"
everyday.txt: change "tracking branch" to "remote-tracking branch"
Change remote tracking to remote-tracking in non-trivial places
Replace "remote tracking" with "remote-tracking"
Better "Changed but not updated" message in git-status
|
|
The new boolean "fetchRecurseSubmodules" config option controls the
behavior for "git fetch" and "git pull". It specifies if these commands
should recurse into submodules and fetch new commits there too and can be
set separately for each submodule.
In the .gitmodules file "submodule.<name>.fetchRecurseSubmodules" entries
are read before looking for them in .git/config. Thus settings found in
.git/config will override those from .gitmodules, thereby allowing the
user to ignore settings given by the remote side while also letting
upstream set reasonable defaults for those users who don't have special
needs.
This configuration can be overridden by the command line option
"--[no-]recurse-submodules" of "git fetch" and "git pull".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Until now you had to call "git submodule update" (without -N|--no-fetch
option) or something like "git submodule foreach git fetch" to fetch
new commits in populated submodules from their remote.
This could lead to "(commits not present)" messages in the output of
"git diff --submodule" (which is used by "git gui" and "gitk") after
fetching or pulling new commits in the superproject and is an obstacle for
implementing recursive checkout of submodules. Also "git submodule
update" cannot fetch changes when disconnected, so it was very easy to
forget to fetch the submodule changes before disconnecting only to
discover later that they are needed.
This patch adds the "--recurse-submodules" option to recursively fetch
each populated submodule from the url configured in the .git/config of the
submodule at the end of each "git fetch" or during "git pull" in the
superproject. The submodule paths are taken from the index.
The hidden option "--submodule-prefix" is added to "git fetch" to be able
to print out the full paths of nested submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"Fetch all tags and merge them" does not make any sense as a request at
the logical level, even though it might be more convenient to type.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"remote-tracking" branch makes it explicit that the branch is "tracking a
remote", as opposed to "remote, and tracking something".
See discussion in e.g.
http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com
for more details.
This patch is a straightforward application of
perl -pi -e 's/remote tracking branch/remote-tracking branch/'
except in the RelNotes directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, if remote.<name>.tagopt was set, the --tags and option would
have no effect when given to git fetch. So if
tagopt="--no-tags"
git fetch --tags
would not actually fetch tags.
This patch changes this behavior to only follow what is written in the
config if there is no option passed by the command line.
Signed-off-by: Daniel Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's already implemented, just undocumented.
Signed-off-by: Oren Held <orenhe@il.ibm.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Note that in the documentation for git-pull, documentation for the
--progress option is displayed under the "Options related to fetching"
subtitle via fetch-options.txt.
Also, update the documentation of the -q/--quiet option for git-pull to
mention its effect on progress reporting during fetching.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
Teach fetch --dry-run as users of "git remote prune" switching to "git fetch
--prune" may expect it. Unfortunately OPT__DRY_RUN() cannot be used as fetch
already uses "-n" for something else.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach fetch to cull stale remote tracking branches after fetching via --prune.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the --multiple option to specify that all arguments are either
groups or remotes. The primary reason for adding this option is
to allow us to re-implement 'git remote update' using fetch.
It would have been nice if this option was not needed, but since
the colon in a refspec is optional, it is in general not possible
to know whether a single, colon-less argument is a remote or a
refspec.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git remote' is meant for managing remotes and 'git fetch' is meant
for actually fetching data from remote repositories. Therefore, it is
not logical that you must use 'git remote update' to fetch from
more than one repository at once.
Add the --all option to 'git fetch', to tell it to attempt to fetch
from all remotes. Also, if --all is not given, the <repository>
argument is allowed to be the name of a group, to allow fetching
from all repositories in the group.
Other options except -v and -q are silently ignored.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-fetch.{1,html} will be helped with this patch
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Brandon Williams
Ævar Arnfjörð Bjarmason
Junio C Hamano
Matthieu Moy
Jeff King
Nguyễn Thái Ngọc Duy
Eric Wong
Sebastian Schuberth
Stefan Beller
Michael Haggerty
Philip Oakley
Jens Lehmann
Daniel Johnson
Oren Held
Tay Ray Chuan
Thomas Rast
Jay Soffian
Björn Gustavsson
Jari Aalto