summaryrefslogtreecommitdiff
path: root/Documentation/fetch-options.txt
AgeCommit message (Collapse)AuthorFilesLines
2018-09-17Merge branch 'ab/fetch-tags-noclobber'Libravatar Junio C Hamano1-5/+10
The rules used by "git push" and "git fetch" to determine if a ref can or cannot be updated were inconsistent; specifically, fetching to update existing tags were allowed even though tags are supposed to be unmoving anchoring points. "git fetch" was taught to forbid updates to existing tags without the "--force" option. * ab/fetch-tags-noclobber: fetch: stop clobbering existing tags without --force fetch: document local ref updates with/without --force push doc: correct lies about how push refspecs work push doc: move mention of "tag <tag>" later in the prose push doc: remove confusing mention of remote merger fetch tests: add a test for clobbering tag behavior push tests: use spaces in interpolated string push tests: make use of unused $1 in test description fetch: change "branch" to "reference" in --force -h output
2018-08-31fetch: document local ref updates with/without --forceLibravatar Ævar Arnfjörð Bjarmason1-5/+10
Refer to the new git-push(1) documentation about when ref updates are and aren't allowed with and without --force, noting how "git-fetch" differs from the behavior of "git-push". Perhaps it would be better to split this all out into a new gitrefspecs(7) man page, or present this information using tables. In lieu of that, this is accurate, and fixes a big omission in the existing refspec docs. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-01fetch doc: cross-link two new negotiation optionsLibravatar Ævar Arnfjörð Bjarmason1-0/+3
Users interested in the fetch.negotiationAlgorithm variable added in 42cc7485a2 ("negotiator/skipping: skip commits during fetch", 2018-07-16) are probably interested in the related --negotiation-tip option added in 3390e42adb ("fetch-pack: support negotiation tip whitelist", 2018-07-02). Change the documentation for those two to reference one another to point readers in the right direction. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03fetch-pack: support negotiation tip whitelistLibravatar Jonathan Tan1-0/+16
During negotiation, fetch-pack eventually reports as "have" lines all commits reachable from all refs. Allow the user to restrict the commits sent in this way by providing a whitelist of tips; only the tips themselves and their ancestors will be sent. Both globs and single objects are supported. This feature is only supported for protocols that support connect or stateless-connect (such as HTTP with protocol v2). This will speed up negotiation when the repository has multiple relatively independent branches (for example, when a repository interacts with multiple repositories, such as with linux-next [1] and torvalds/linux [2]), and the user knows which local branch is likely to have commits in common with the upstream branch they are fetching. [1] https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next/ [2] https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux/ Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-24fetch: send server options when using protocol v2Libravatar Brandon Williams1-0/+8
Teach fetch to optionally accept server options by specifying them on the cmdline via '-o' or '--server-option'. These server options are sent to the remote end when performing a fetch communicating using protocol version 2. If communicating using a protocol other than v2 the provided options are ignored and not sent to the remote end. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-09fetch: add a --prune-tags option and fetch.pruneTags configLibravatar Ævar Arnfjörð Bjarmason1-1/+13
Add a --prune-tags option to git-fetch, along with fetch.pruneTags config option and a -P shorthand (-p is --prune). This allows for doing any of: git fetch -p -P git fetch --prune --prune-tags git fetch -p -P origin git fetch --prune --prune-tags origin Or simply: git config fetch.prune true && git config fetch.pruneTags true && git fetch Instead of the much more verbose: git fetch --prune origin 'refs/tags/*:refs/tags/*' '+refs/heads/*:refs/remotes/origin/*' Before this feature it was painful to support the use-case of pulling from a repo which is having both its branches *and* tags deleted regularly, and have our local references to reflect upstream. At work we create deployment tags in the repo for each rollout, and there's *lots* of those, so they're archived within weeks for performance reasons. Without this change it's hard to centrally configure such repos in /etc/gitconfig (on servers that are only used for working with them). You need to set fetch.prune=true globally, and then for each repo: git -C {} config --replace-all remote.origin.fetch "refs/tags/*:refs/tags/*" "^\+*refs/tags/\*:refs/tags/\*$" Now I can simply set fetch.pruneTags=true in /etc/gitconfig as well, and users running "git pull" will automatically get the pruning semantics I want. Even though "git remote" has corresponding "prune" and "update --prune" subcommands I'm intentionally not adding a corresponding prune-tags or "update --prune --prune-tags" mode to that command. It's advertised (as noted in my recent "git remote doc: correct dangerous lies about what prune does") as only modifying remote tracking references, whereas any --prune-tags option is always going to modify what from the user's perspective is a local copy of the tag, since there's no such thing as a remote tracking tag. Ideally add_prune_tags_to_fetch_refspec() would be something that would use ALLOC_GROW() to grow the 'fetch` member of the 'remote' struct. Instead I'm realloc-ing remote->fetch and adding the tag_refspec to the end. The reason is that parse_{fetch,push}_refspec which allocate the refspec (ultimately remote->fetch) struct are called many places that don't have access to a 'remote' struct. It would be hard to change all their callsites to be amenable to carry around the bookkeeping variables required for dynamic allocation. All the other callers of the API first incrementally construct the string version of the refspec in remote->fetch_refspec via add_fetch_refspec(), before finally calling parse_fetch_refspec() via some variation of remote_get(). It's less of a pain to deal with the one special case that needs to modify already constructed refspecs than to chase down and change all the other callsites. The API I'm adding is intentionally not generalized because if we add more of these we'd probably want to re-visit how this is done. See my "Re: [BUG] git remote prune removes local tags, depending on fetch config" (87po6ahx87.fsf@evledraar.gmail.com; https://public-inbox.org/git/87po6ahx87.fsf@evledraar.gmail.com/) for more background info. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-09git-fetch & config doc: link to the new PRUNING sectionLibravatar Ævar Arnfjörð Bjarmason1-0/+3
Amend the documentation for fetch.prune, fetch.<name>.prune and --prune to link to the recently added PRUNING section. I'd have liked to link directly to it with "<<PRUNING>>" from fetch-options.txt, since it's included in git-fetch.txt (git-pull.txt also includes it, but doesn't include that option). However making a reference across files yields this error: [...]/Documentation/git-fetch.xml:226: element xref: validity error : IDREF attribute linkend references an unknown ID "PRUNING" Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-10Merge branch 'nd/shallow-deepen'Libravatar Junio C Hamano1-0/+14
The existing "git fetch --depth=<n>" option was hard to use correctly when making the history of an existing shallow clone deeper. A new option, "--deepen=<n>", has been added to make this easier to use. "git clone" also learned "--shallow-since=<date>" and "--shallow-exclude=<tag>" options to make it easier to specify "I am interested only in the recent N months worth of history" and "Give me only the history since that version". * nd/shallow-deepen: (27 commits) fetch, upload-pack: --deepen=N extends shallow boundary by N commits upload-pack: add get_reachable_list() upload-pack: split check_unreachable() in two, prep for get_reachable_list() t5500, t5539: tests for shallow depth excluding a ref clone: define shallow clone boundary with --shallow-exclude fetch: define shallow boundary with --shallow-exclude upload-pack: support define shallow boundary by excluding revisions refs: add expand_ref() t5500, t5539: tests for shallow depth since a specific date clone: define shallow clone boundary based on time with --shallow-since fetch: define shallow boundary with --shallow-since upload-pack: add deepen-since to cut shallow repos based on time shallow.c: implement a generic shallow boundary finder based on rev-list fetch-pack: use a separate flag for fetch in deepening mode fetch-pack.c: mark strings for translating fetch-pack: use a common function for verbose printing fetch-pack: use skip_prefix() instead of starts_with() upload-pack: move rev-list code out of check_non_tip() upload-pack: make check_non_tip() clean things up on error upload-pack: tighten number parsing at "deepen" lines ...
2016-07-13Merge branch 'mm/doc-tt'Libravatar Junio C Hamano1-3/+3
More mark-up updates to typeset strings that are expected to literally typed by the end user in fixed-width font. * mm/doc-tt: doc: typeset HEAD and variants as literal CodingGuidelines: formatting HEAD in documentation doc: typeset long options with argument as literal doc: typeset '--' as literal doc: typeset long command-line options as literal doc: typeset short command-line options as literal Documentation/git-mv.txt: fix whitespace indentation
2016-06-28doc: typeset long command-line options as literalLibravatar Matthieu Moy1-3/+3
Similarly to the previous commit, use backquotes instead of forward-quotes, for long options. This was obtained with: perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt and manual tweak to remove false positive in ascii-art (o'--o'--o' to describe rewritten history). Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-27Merge branch 'jk/fetch-prune-doc'Libravatar Junio C Hamano1-1/+1
* jk/fetch-prune-doc: fetch: document that pruning happens before fetching
2016-06-14fetch: document that pruning happens before fetchingLibravatar Jeff King1-1/+1
This was changed in 10a6cc8 (fetch --prune: Run prune before fetching, 2014-01-02), but it seems that nobody in that discussion realized we were advertising the "after" explicitly. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-13fetch, upload-pack: --deepen=N extends shallow boundary by N commitsLibravatar Nguyễn Thái Ngọc Duy1-0/+5
In git-fetch, --depth argument is always relative with the latest remote refs. This makes it a bit difficult to cover this use case, where the user wants to make the shallow history, say 3 levels deeper. It would work if remote refs have not moved yet, but nobody can guarantee that, especially when that use case is performed a couple months after the last clone or "git fetch --depth". Also, modifying shallow boundary using --depth does not work well with clones created by --since or --not. This patch fixes that. A new argument --deepen=<N> will add <N> more (*) parent commits to the current history regardless of where remote refs are. Have/Want negotiation is still respected. So if remote refs move, the server will send two chunks: one between "have" and "want" and another to extend shallow history. In theory, the client could send no "want"s in order to get the second chunk only. But the protocol does not allow that. Either you send no want lines, which means ls-remote; or you have to send at least one want line that carries deep-relative to the server.. The main work was done by Dongcan Jiang. I fixed it up here and there. And of course all the bugs belong to me. (*) We could even support --deepen=<N> where <N> is negative. In that case we can cut some history from the shallow clone. This operation (and --depth=<shorter depth>) does not require interaction with remote side (and more complicated to implement as a result). Helped-by: Duy Nguyen <pclouds@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-13fetch: define shallow boundary with --shallow-excludeLibravatar Nguyễn Thái Ngọc Duy1-0/+5
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-13fetch: define shallow boundary with --shallow-sinceLibravatar Nguyễn Thái Ngọc Duy1-0/+4
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-24Merge branch 'ew/force-ipv4'Libravatar Junio C Hamano1-0/+8
"git fetch" and friends that make network connections can now be told to only use ipv4 (or ipv6). * ew/force-ipv4: connect & http: support -4 and -6 switches for remote operations
2016-02-12connect & http: support -4 and -6 switches for remote operationsLibravatar Eric Wong1-0/+8
Sometimes it is necessary to force IPv4-only or IPv6-only operation on networks where name lookups may return a non-routable address and stall remote operations. The ssh(1) command has an equivalent switches which we may pass when we run them. There may be old ssh(1) implementations out there which do not support these switches; they should report the appropriate error in that case. rsync support is untouched for now since it is deprecated and scheduled to be removed. Signed-off-by: Eric Wong <normalperson@yhbt.net> Reviewed-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-20Merge branch 'ss/clone-depth-single-doc'Libravatar Junio C Hamano1-4/+5
Documentation for "git fetch --depth" has been updated for clarity. * ss/clone-depth-single-doc: docs: clarify that --depth for git-fetch works with newly initialized repos docs: say "commits" in the --depth option wording for git-clone docs: clarify that passing --depth to git-clone implies --single-branch
2016-01-08docs: clarify that --depth for git-fetch works with newly initialized reposLibravatar Sebastian Schuberth1-4/+5
The original wording sounded as if --depth could only be used to deepen or shorten the history of existing repos. However, that is not the case. In a workflow like $ git init $ git remote add origin https://github.com/git/git.git $ git fetch --depth=1 The newly initialized repo is properly created as a shallow repo. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-16submodules: allow parallel fetching, add tests and documentationLibravatar Stefan Beller1-0/+7
This enables the work of the previous patches. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-13*config.txt: stick to camelCase naming conventionLibravatar Nguyễn Thái Ngọc Duy1-1/+1
This should improve readability. Compare "thislongname" and "thisLongName". The following keys are left in unchanged. We can decide what to do with them later. - am.keepcr - core.autocrlf .safecrlf .trustctime - diff.dirstat .noprefix - gitcvs.usecrlfattr - gui.blamehistoryctx .trustmtime - pull.twohead - receive.autogc - sendemail.signedoffbycc .smtpsslcertpath .suppresscc Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-05fetch: allow explicit --refmap to override configurationLibravatar Junio C Hamano1-0/+8
Since the introduction of opportunisitic updates of remote-tracking branches, started at around f2690487 (fetch: opportunistically update tracking refs, 2013-05-11) with a few updates in v1.8.4 era, the remote.*.fetch configuration always kicks in even when a refspec to specify what to fetch is given on the command line, and there is no way to disable or override it per-invocation. Teach the command to pay attention to the --refmap=<lhs>:<rhs> command-line options that can be used to override the use of configured remote.*.fetch as the refmap. Signed-off-by: Junio C Hamano <gitster@pobox.com> ---
2014-01-17Merge branch 'nd/shallow-clone'Libravatar Junio C Hamano1-2/+12
Fetching from a shallow-cloned repository used to be forbidden, primarily because the codepaths involved were not carefully vetted and we did not bother supporting such usage. This attempts to allow object transfer out of a shallow-cloned repository in a controlled way (i.e. the receiver become a shallow repository with truncated history). * nd/shallow-clone: (31 commits) t5537: fix incorrect expectation in test case 10 shallow: remove unused code send-pack.c: mark a file-local function static git-clone.txt: remove shallow clone limitations prune: clean .git/shallow after pruning objects clone: use git protocol for cloning shallow repo locally send-pack: support pushing from a shallow clone via http receive-pack: support pushing to a shallow clone via http smart-http: support shallow fetch/clone remote-curl: pass ref SHA-1 to fetch-pack as well send-pack: support pushing to a shallow clone receive-pack: allow pushes that update .git/shallow connected.c: add new variant that runs with --shallow-file add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses receive/send-pack: support pushing from a shallow clone receive-pack: reorder some code in unpack() fetch: add --update-shallow to accept refs that update .git/shallow upload-pack: make sure deepening preserves shallow roots fetch: support fetching from a shallow repository clone: support remote shallow repository ...
2013-12-10fetch: add --update-shallow to accept refs that update .git/shallowLibravatar Nguyễn Thái Ngọc Duy1-0/+6
The same steps are done as in when --update-shallow is not given. The only difference is we now add all shallow commits in "ours" and "theirs" to .git/shallow (aka "step 8"). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-10upload-pack: make sure deepening preserves shallow rootsLibravatar Nguyễn Thái Ngọc Duy1-2/+6
When "fetch --depth=N" where N exceeds the longest chain of history in the source repo, usually we just send an "unshallow" line to the client so full history is obtained. When the source repo is shallow we need to make sure to "unshallow" the current shallow point _and_ "shallow" again when the commit reaches its shallow bottom in the source repo. This should fix both cases: large <N> and --unshallow. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-30fetch-options.txt: simplify ifdef/ifndef/endif usageLibravatar Michael Haggerty1-4/+1
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-30fetch --prune: prune only based on explicit refspecsLibravatar Michael Haggerty1-5/+14
The old behavior of "fetch --prune" was to prune whatever was being fetched. In particular, "fetch --prune --tags" caused tags not only to be fetched, but also to be pruned. This is inappropriate because there is only one tags namespace that is shared among the local repository and all remotes. Therefore, if the user defines a local tag and then runs "git fetch --prune --tags", then the local tag is deleted. Moreover, "--prune" and "--tags" can also be configured via fetch.prune / remote.<name>.prune and remote.<name>.tagopt, making it even less obvious that an invocation of "git fetch" could result in tag lossage. Since the command "git remote update" invokes "git fetch", it had the same problem. The command "git remote prune", on the other hand, disregarded the setting of remote.<name>.tagopt, and so its behavior was inconsistent with that of the other commands. So the old behavior made it too easy to lose tags. To fix this problem, change "fetch --prune" to prune references based only on refspecs specified explicitly by the user, either on the command line or via remote.<name>.fetch. Thus, tags are no longer made subject to pruning by the --tags option or the remote.<name>.tagopt setting. However, tags *are* still subject to pruning if they are fetched as part of a refspec, and that is good. For example: * On the command line, git fetch --prune 'refs/tags/*:refs/tags/*' causes tags, and only tags, to be fetched and pruned, and is therefore a simple way for the user to get the equivalent of the old behavior of "--prune --tag". * For a remote that was configured with the "--mirror" option, the configuration is set to include [remote "name"] fetch = +refs/*:refs/* , which causes tags to be subject to pruning along with all other references. This is the behavior that will typically be desired for a mirror. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-30fetch --tags: fetch tags *in addition to* other stuffLibravatar Michael Haggerty1-5/+3
Previously, fetch's "--tags" option was considered equivalent to specifying the refspec "refs/tags/*:refs/tags/*" on the command line; in particular, it caused the remote.<name>.refspec configuration to be ignored. But it is not very useful to fetch tags without also fetching other references, whereas it *is* quite useful to be able to fetch tags *in addition to* other references. So change the semantics of this option to do the latter. If a user wants to fetch *only* tags, then it is still possible to specifying an explicit refspec: git fetch <remote> 'refs/tags/*:refs/tags/*' Please note that the documentation prior to 1.8.0.3 was ambiguous about this aspect of "fetch --tags" behavior. Commit f0cb2f137c 2012-12-14 fetch --tags: clarify documentation made the documentation match the old behavior. This commit changes the documentation to match the new behavior. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-11Merge branch 'rr/maint-fetch-tag-doc-asterisks'Libravatar Junio C Hamano1-1/+1
* rr/maint-fetch-tag-doc-asterisks: fetch-options.txt: prevent a wildcard refspec from getting misformatted
2013-06-07fetch-options.txt: prevent a wildcard refspec from getting misformattedLibravatar Junio C Hamano1-1/+1
When explaining the "--tags" option as an equivalent to giving an explicit "refs/tags/*:refs/tags/*" refspec, the two asterisks were misinterpreted by AsciiDoc as a request to typeset the string segment between them in bold. We could fix it in two ways. We can replace them with {asterisk}s while keeping the string as body text, or we can mark it as a literal string with backquotes around it. Let's do the latter, as it is teaching the user an "exactly as typed" alternative. Noticed-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-11fetch: elaborate --depth actionLibravatar Nguyễn Thái Ngọc Duy1-1/+1
--depth is explained as deepen, but the way it's applied, it can shorten the history as well. Keen users may have noticed the implication by the phrase "the specified number of commits from the tip of each remote branch". Put "shorten" in the description to make it clearer. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-11fetch: add --unshallow for turning shallow repo into complete oneLibravatar Nguyễn Thái Ngọc Duy1-0/+4
The user can do --depth=2147483647 (*) for restoring complete repo now. But it's hard to remember. Any other numbers larger than the longest commit chain in the repository would also do, but some guessing may be involved. Make easy-to-remember --unshallow an alias for --depth=2147483647. Make upload-pack recognize this special number as infinite depth. The effect is essentially the same as before, except that upload-pack is more efficient because it does not have to traverse to the bottom anymore. The chance of a user actually wanting exactly 2147483647 commits depth, not infinite, on a repository with a history that long, is probably too small to consider. The client can learn to add or subtract one commit to avoid the special treatment when that actually happens. (*) This is the largest positive number a 32-bit signed integer can contain. JGit and older C Git store depth as "int" so both are OK with this number. Dulwich does not support shallow clone. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-13fetch --tags: clarify documentationLibravatar Junio C Hamano1-8/+5
Explain that --tags is just like another explicit refspec on the command line and as such overrides the default refspecs configured via the remote.$name.fetch variable. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-18Doc: shallow clone deepens _to_ new depthLibravatar Philip Oakley1-1/+2
Clarify that 'depth=' specifies the new depth from the remote's branch tip. It does not add the depth to the existing shallow clone. (details from pack-protocol.txt). Clarify that tags are not fetched. (details from shallow.txt) Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09fetch/pull: Don't recurse into a submodule when commits are already presentLibravatar Jens Lehmann1-1/+2
When looking for submodules where new commits have been recorded in the superproject ignore those cases where the submodules commits are already present locally. This can happen e.g. when the submodule has been rewound to an earlier state. Then there is no need to fetch the submodule again as the commit recorded in the newly fetched superproject commit has already been fetched earlier into the submodule. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09fetch/pull: Add the 'on-demand' value to the --recurse-submodules optionLibravatar Jens Lehmann1-3/+13
Until now the --recurse-submodules option could only be used to either fetch all populated submodules recursively or to disable recursion completely. As fetch and pull now by default just fetch those submodules for which new commits have been fetched in the superproject, a command line option to enforce that behavior is needed to be able to override configuration settings. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09fetch/pull: recurse into submodules when necessaryLibravatar Jens Lehmann1-0/+8
To be able to access all commits of populated submodules referenced by the superproject it is sufficient to only then let "git fetch" recurse into a submodule when the new commits fetched in the superproject record new commits for it. Having these commits present is extremely useful when using the "--submodule" option to "git diff" (which is what "git gui" and "gitk" do since 1.6.6), as all submodule commits needed for creating a descriptive output can be accessed. Also merging submodule commits (added in 1.7.3) depends on the submodule commits in question being present to work. Last but not least this enables disconnected operation when using submodules, as all commits necessary for a successful "git submodule update -N" will have been fetched automatically. So we choose this mode as the default for fetch and pull. Before a new or changed ref from upstream is updated in update_local_ref() "git rev-list <new-sha1> --not --branches --remotes" is used to determine all newly fetched commits. These are then walked and diffed against their parent(s) to see if a submodule has been changed. If that is the case, its path is stored to be fetched after the superproject fetch is completed. Using the "--recurse-submodules" or the "--no-recurse-submodules" option disables the examination of the fetched refs because the result will be ignored anyway. There is currently no infrastructure for storing deleted and new submodules in the .git directory of the superproject. That's why fetch and pull for now only fetch submodules that are already checked out and are not renamed. In t7403 the "--no-recurse-submodules" argument had to be added to "git pull" to avoid failure because of the moved upstream submodule repo. Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-07pull: Document the "--[no-]recurse-submodules" optionsLibravatar Jens Lehmann1-2/+0
In commits be254a0ea9 and 7dce19d374 the handling of the new fetch options "--[no-]recurse-submodules" had been added to git-pull.sh. But they were not documented as the pull options they now are, so let's fix that. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-16Merge branch 'jl/fetch-submodule-recursive'Libravatar Junio C Hamano1-0/+11
* jl/fetch-submodule-recursive: fetch_populated_submodules(): document dynamic allocation Submodules: Add the "fetchRecurseSubmodules" config option Add the 'fetch.recurseSubmodules' config setting fetch/pull: Add the --recurse-submodules option Conflicts: builtin/fetch.c
2010-11-24Merge branch 'mm/phrase-remote-tracking'Libravatar Junio C Hamano1-1/+1
* mm/phrase-remote-tracking: git-branch.txt: mention --set-upstream as a way to change upstream configuration user-manual: remote-tracking can be checked out, with detached HEAD user-manual.txt: explain better the remote(-tracking) branch terms Change incorrect "remote branch" to "remote tracking branch" in C code Change incorrect uses of "remote branch" meaning "remote-tracking" Change "tracking branch" to "remote-tracking branch" everyday.txt: change "tracking branch" to "remote-tracking branch" Change remote tracking to remote-tracking in non-trivial places Replace "remote tracking" with "remote-tracking" Better "Changed but not updated" message in git-status
2010-11-12Submodules: Add the "fetchRecurseSubmodules" config optionLibravatar Jens Lehmann1-1/+1
The new boolean "fetchRecurseSubmodules" config option controls the behavior for "git fetch" and "git pull". It specifies if these commands should recurse into submodules and fetch new commits there too and can be set separately for each submodule. In the .gitmodules file "submodule.<name>.fetchRecurseSubmodules" entries are read before looking for them in .git/config. Thus settings found in .git/config will override those from .gitmodules, thereby allowing the user to ignore settings given by the remote side while also letting upstream set reasonable defaults for those users who don't have special needs. This configuration can be overridden by the command line option "--[no-]recurse-submodules" of "git fetch" and "git pull". Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-12Add the 'fetch.recurseSubmodules' config settingLibravatar Jens Lehmann1-2/+3
This new boolean option can be used to override the default for "git fetch" and "git pull", which is to not recurse into populated submodules and fetch all new commits there too. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-12fetch/pull: Add the --recurse-submodules optionLibravatar Jens Lehmann1-0/+10
Until now you had to call "git submodule update" (without -N|--no-fetch option) or something like "git submodule foreach git fetch" to fetch new commits in populated submodules from their remote. This could lead to "(commits not present)" messages in the output of "git diff --submodule" (which is used by "git gui" and "gitk") after fetching or pulling new commits in the superproject and is an obstacle for implementing recursive checkout of submodules. Also "git submodule update" cannot fetch changes when disconnected, so it was very easy to forget to fetch the submodule changes before disconnecting only to discover later that they are needed. This patch adds the "--recurse-submodules" option to recursively fetch each populated submodule from the url configured in the .git/config of the submodule at the end of each "git fetch" or during "git pull" in the superproject. The submodule paths are taken from the index. The hidden option "--submodule-prefix" is added to "git fetch" to be able to print out the full paths of nested submodules. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-03pull: Remove --tags option from manpageLibravatar Jens Lehmann1-0/+2
"Fetch all tags and merge them" does not make any sense as a request at the logical level, even though it might be more convenient to type. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-03Replace "remote tracking" with "remote-tracking"Libravatar Matthieu Moy1-1/+1
"remote-tracking" branch makes it explicit that the branch is "tracking a remote", as opposed to "remote, and tracking something". See discussion in e.g. http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com for more details. This patch is a straightforward application of perl -pi -e 's/remote tracking branch/remote-tracking branch/' except in the RelNotes directory. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-14fetch: allow command line --tags to override configLibravatar Daniel Johnson1-2/+6
Originally, if remote.<name>.tagopt was set, the --tags and option would have no effect when given to git fetch. So if tagopt="--no-tags" git fetch --tags would not actually fetch tags. This patch changes this behavior to only follow what is written in the config if there is no option passed by the command line. Signed-off-by: Daniel Johnson <ComputerDruid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-13git fetch documentation: describe short '-p' synonym to '--prune' optionLibravatar Oren Held1-0/+1
It's already implemented, just undocumented. Signed-off-by: Oren Held <orenhe@il.ibm.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-24fetch and pull: learn --progressLibravatar Tay Ray Chuan1-1/+8
Note that in the documentation for git-pull, documentation for the --progress option is displayed under the "Options related to fetching" subtitle via fetch-options.txt. Also, update the documentation of the -q/--quiet option for git-pull to mention its effect on progress reporting during fetching. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-5/+5
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2009-11-10builtin-fetch: add --dry-run optionLibravatar Jay Soffian1-0/+5
Teach fetch --dry-run as users of "git remote prune" switching to "git fetch --prune" may expect it. Unfortunately OPT__DRY_RUN() cannot be used as fetch already uses "-n" for something else. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>