| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
AsciiDoc and Asciidoctor do not agree on what to write in the header and
footer of each man-page, i.e., the very first and the very last line of
*.[157]. Those differences can certainly be interesting in their own
right, but they clutter the output of `./doc-diff --from-asciidoc
--to-asciidoctor HEAD HEAD` quite a bit since the diff contains some
10-15 lines of noise per file diffed.
Teach doc-diff to cut away the first two and last two lines, i.e., the
header/footer and the empty line immediately following/preceding it.
Because Asciidoctor uses an extra empty line compared to AsciiDoc,
remove one more line at each end of the file, but only if it's empty.
An alternative approach might be to pass down `--no-header-footer`,
which both AsciiDoc and Asciidoctor understand, but it has some
drawbacks. First of all, the result doesn't build -- `xmlto` stumbles on
the resulting xml since it has multiple root elements. Second, it cuts
too much -- dropping the header loses the synopsis, which would be
interesting to diff.
Like in the previous commit, encode this option into the directory name
of the "installed" and "rendered" files. Otherwise, we wouldn't be able
to trust that what we use out of that cache actually corresponds to the
options given for this run. (We could optimize this caching a little
since this flag doesn't affect the contents of "installed" at all, but
let's punt on that.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Provide `--from-asciidoctor` and `--to-asciidoctor` to select that the
"from" resp. "to" commit should be built with Asciidoctor, and provide
an `--asciidoctor` shortcut for giving both. Similarly, provide
--{from-,to-,}asciidoc for explicitly selecting AsciiDoc.
Implement this using the USE_ASCIIDOCTOR flag. Let's not enforce a
default here, but instead just let the Makefile fall back on whatever is
in config.mak, so that `./doc-diff foo bar` without any of of these new
options behaves exactly like it did before this commit.
Encode the choice into the directory names of our "installed" and
"rendered" files, so that we can run `./doc-diff --from-asciidoc
--to-asciidoctor HEAD HEAD` without our two runs stomping on each other.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `render_tree()`, `$1` is documented to be the commit-ish/oid and we
use it as that with `git checkout`, but we mostly use it to form the
name of various directories. To separate these concerns, and because we
are about to construct the directory names a bit differently, take two
distinct arguments instead.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running "Documentation/doc-diff x" from anywhere other than the
top-level of the working tree did not show the usage string
correctly, which has been fixed.
* ma/doc-diff-usage-fix:
doc-diff: don't `cd_to_toplevel`
|
|
`usage` tries to call $0, which might very well be "./doc-diff", so if
we `cd_to_toplevel` before calling `usage`, we'll end with an error to
the effect of "./doc-diff: not found" rather than a friendly `doc-diff
-h` output. This regressed in ad51743007 ("doc-diff: add --clean mode to
remove temporary working gunk", 2018-08-31) where we moved the call to
`cd_to_toplevel` to much earlier.
A general fix might be to teach git-sh-setup to save away the absolute
path for $0 and then use that, instead. I'm not aware of any portable
way of doing that, see, e.g., d2addc3b96 ("t7800: readlink may not be
available", 2016-05-31).
An early version of this patch moved `cd_to_toplevel` back to where it
was before ad51743007 and taught the "--clean" code to cd on its own.
But let's try instead to get rid of the cd-ing entirely. We don't really
need it and we can work with absolute paths instead. There's just one
use of $PWD that we need to adjust by simply dropping it.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a bug in which the same path could be registered under multiple
worktree entries if the path was missing (for instance, was removed
manually). Also, as a convenience, expand the number of cases in
which --force is applicable.
* es/worktree-forced-ops-fix:
doc-diff: force worktree add
worktree: delete .git/worktrees if empty after 'remove'
worktree: teach 'remove' to override lock when --force given twice
worktree: teach 'move' to override lock when --force given twice
worktree: teach 'add' to respect --force for registered but missing path
worktree: disallow adding same path multiple times
worktree: prepare for more checks of whether path can become worktree
worktree: generalize delete_git_dir() to reduce code duplication
worktree: move delete_git_dir() earlier in file for upcoming new callers
worktree: don't die() in library function find_worktree()
|
|
We avoid re-creating our temporary worktree if it's already
there. But we may run into a situation where the worktree
has been deleted, but an entry still exists in
$GIT_DIR/worktrees.
Older versions of git-worktree would annoyingly create a
series of duplicate entries. Recent versions now detect and
prevent this, allowing you to override with "-f". Since we
know that the worktree in question was just our temporary
workspace, it's safe for us to always pass "-f".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of its operation, doc-diff creates a bunch of temporary
working files and holds onto them in order to speed up subsequent
invocations. These files are never deleted. Moreover, it creates a
temporary working tree (via git-wortkree) which likewise never gets
removed.
Without knowing the implementation details of the tool, a user may not
know how to clean up manually afterward. Worse, the user may find it
surprising and alarming to discover a working tree which s/he did not
create explicitly.
To address these issues, add a --clean mode which removes the
temporary working tree and deletes all generated files.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
doc-diff invokes 'man' with the -l option to force "local" mode,
however, neither MacOS nor FreeBSD recognize this option. On those
platforms, if the argument to 'man' contains a slash, it is
automatically interpreted as a file specification, so a "local"-like
mode is not needed. And, it turns out, 'man' which does support -l
falls back to enabling -l automatically if it can't otherwise find a
manual entry corresponding to the argument. Since doc-diff always
passes an absolute path of the nroff source file to 'man', the -l
option kicks in anyhow, despite not being specified explicitly.
Therefore, make the invocation portable to the various platforms by
simply dropping -l.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The doc-diff script immediately resolves its two endpoints
to actual object ids, so that we can reuse cached results
even if they appear under a different name. But we still use
the original name the user fed us when running "git
checkout" in our temporary worktree. This can lead to
confusing results:
- the namespace inside the worktree is different than the
one outside. In particular, "./doc-diff origin HEAD"
will resolve HEAD inside the worktree, whose detached
HEAD will be pointing at origin! As a result, such a
diff would always be empty.
- worse, we will store this result under the oid we got by
resolving HEAD in the main worktree, thus polluting our
cache
- we didn't pass --detach, which meant that using a branch
name would cause us to actually check out that branch,
making it unavailable to other worktrees.
We can solve this by feeding the already-resolved object id
to git-checkout. That naturally forces a detached HEAD, but
just to make clear our expectation, let's explicitly pass
--detach.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already advise people to make sure their documentation
formats correctly. Let's point them at the doc-diff script,
which can help with that.
Let's also put a brief note in the script about its purpose,
since that otherwise can only be found in the original
commit message. Along with the existing -h/usage text,
that's hopefully enough for developers to make use of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After making a change to the documentation, it's easy to
forget to check the rendered version to make sure it was
formatted as you intended. And simply doing a diff between
the two built versions is less trivial than you might hope:
- diffing the roff or html output isn't particularly
readable; what we really care about is what the end user
will see
- you have to tweak a few build variables to avoid
spurious differences (e.g., version numbers, build
times)
Let's provide a script that builds and installs the manpages
for two commits, renders the results using "man", and diffs
the result. Since this is time-consuming, we'll also do our
best to avoid repeated work, keeping intermediate results
between runs.
Some of this could probably be made a little less ugly if we
built support into Documentation/Makefile. But by relying
only on "make install-man" working, this script should work
for generating a diff between any two versions, whether they
include this script or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Martin Ågren
Junio C Hamano
Jeff King
Eric Sunshine