summaryrefslogtreecommitdiff
path: root/Documentation/diff-options.txt
AgeCommit message (Collapse)AuthorFilesLines
2016-10-27Merge branch 'nd/ita-empty-commit'Libravatar Junio C Hamano1-0/+8
When new paths were added by "git add -N" to the index, it was enough to circumvent the check by "git commit" to refrain from making an empty commit without "--allow-empty". The same logic prevented "git status" to show such a path as "new file" in the "Changes not staged for commit" section. * nd/ita-empty-commit: commit: don't be fooled by ita entries when creating initial commit commit: fix empty commit creation when there's no changes but ita entries diff: add --ita-[in]visible-in-index diff-lib: allow ita entries treated as "not yet exist in index"
2016-10-26Merge branch 'jc/ws-error-highlight'Libravatar Junio C Hamano1-0/+2
"git diff/log --ws-error-highlight=<kind>" lacked the corresponding configuration variable to set it by default. * jc/ws-error-highlight: diff: introduce diff.wsErrorHighlight option diff.c: move ws-error-highlight parsing helpers up diff.c: refactor parse_ws_error_highlight() t4015: split out the "setup" part of ws-error-highlight test
2016-10-24diff: add --ita-[in]visible-in-indexLibravatar Nguyễn Thái Ngọc Duy1-0/+8
The option --ita-invisible-in-index exposes the "ita_invisible_in_index" diff flag to outside to allow easier experimentation with this new mode. The "plan" is to make --ita-invisible-in-index default to keep consistent behavior with 'status' and 'commit', but a bunch other commands like 'apply', 'merge', 'reset'.... need to be taken into consideration as well. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-04diff: introduce diff.wsErrorHighlight optionLibravatar Junio C Hamano1-0/+2
With the preparatory steps, it has become trivial to teach the system a new diff.wsErrorHighlight configuration that gives the default value for --ws-error-highlight command line option. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-26Merge branch 'mh/diff-indent-heuristic'Libravatar Junio C Hamano1-6/+1
Output from "git diff" can be made easier to read by selecting which lines are common and which lines are added/deleted intelligently when the lines before and after the changed section are the same. A command line option is added to help with the experiment to find a good heuristics. * mh/diff-indent-heuristic: blame: honor the diff heuristic options and config parse-options: add parse_opt_unknown_cb() diff: improve positioning of add/delete blocks in diffs xdl_change_compact(): introduce the concept of a change group recs_match(): take two xrecord_t pointers as arguments is_blank_line(): take a single xrecord_t as argument xdl_change_compact(): only use heuristic if group can't be matched xdl_change_compact(): fix compaction heuristic to adjust ixo
2016-09-19blame: honor the diff heuristic options and configLibravatar Michael Haggerty1-7/+1
Teach "git blame" and "git annotate" the --compaction-heuristic and --indent-heuristic options that are now supported by "git diff". Also teach them to honor the `diff.compactionHeuristic` and `diff.indentHeuristic` configuration options. It would be conceivable to introduce separate configuration options for "blame" and "annotate"; for example `blame.compactionHeuristic` and `blame.indentHeuristic`. But it would be confusing to users if blame output is inconsistent with diff output, so it makes more sense for them to respect the same configuration. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-19diff: improve positioning of add/delete blocks in diffsLibravatar Michael Haggerty1-4/+5
Some groups of added/deleted lines in diffs can be slid up or down, because lines at the edges of the group are not unique. Picking good shifts for such groups is not a matter of correctness but definitely has a big effect on aesthetics. For example, consider the following two diffs. The first is what standard Git emits: --- a/9c572b21dd090a1e5c5bb397053bf8043ffe7fb4:git-send-email.perl +++ b/6dcfa306f2b67b733a7eb2d7ded1bc9987809edb:git-send-email.perl @@ -231,6 +231,9 @@ if (!defined $initial_reply_to && $prompting) { } if (!$smtp_server) { + $smtp_server = $repo->config('sendemail.smtpserver'); +} +if (!$smtp_server) { foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) { if (-x $_) { $smtp_server = $_; The following diff is equivalent, but is obviously preferable from an aesthetic point of view: --- a/9c572b21dd090a1e5c5bb397053bf8043ffe7fb4:git-send-email.perl +++ b/6dcfa306f2b67b733a7eb2d7ded1bc9987809edb:git-send-email.perl @@ -230,6 +230,9 @@ if (!defined $initial_reply_to && $prompting) { $initial_reply_to =~ s/(^\s+|\s+$)//g; } +if (!$smtp_server) { + $smtp_server = $repo->config('sendemail.smtpserver'); +} if (!$smtp_server) { foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) { if (-x $_) { This patch teaches Git to pick better positions for such "diff sliders" using heuristics that take the positions of nearby blank lines and the indentation of nearby lines into account. The existing Git code basically always shifts such "sliders" as far down in the file as possible. The only exception is when the slider can be aligned with a group of changed lines in the other file, in which case Git favors depicting the change as one add+delete block rather than one add and a slightly offset delete block. This naive algorithm often yields ugly diffs. Commit d634d61ed6 improved the situation somewhat by preferring to position add/delete groups to make their last line a blank line, when that is possible. This heuristic does more good than harm, but (1) it can only help if there are blank lines in the right places, and (2) always picks the last blank line, even if there are others that might be better. The end result is that it makes perhaps 1/3 as many errors as the default Git algorithm, but that still leaves a lot of ugly diffs. This commit implements a new and much better heuristic for picking optimal "slider" positions using the following approach: First observe that each hypothetical positioning of a diff slider introduces two splits: one between the context lines preceding the group and the first added/deleted line, and the other between the last added/deleted line and the first line of context following it. It tries to find the positioning that creates the least bad splits. Splits are evaluated based only on the presence and locations of nearby blank lines, and the indentation of lines near the split. Basically, it prefers to introduce splits adjacent to blank lines, between lines that are indented less, and between lines with the same level of indentation. In more detail: 1. It measures the following characteristics of a proposed splitting position in a `struct split_measurement`: * the number of blank lines above the proposed split * whether the line directly after the split is blank * the number of blank lines following that line * the indentation of the nearest non-blank line above the split * the indentation of the line directly below the split * the indentation of the nearest non-blank line after that line 2. It combines the measured attributes using a bunch of empirically-optimized weighting factors to derive a `struct split_score` that measures the "badness" of splitting the text at that position. 3. It combines the `split_score` for the top and the bottom of the slider at each of its possible positions, and selects the position that has the best `split_score`. I determined the initial set of weighting factors by collecting a corpus of Git histories from 29 open-source software projects in various programming languages. I generated many diffs from this corpus, and determined the best positioning "by eye" for about 6600 diff sliders. I used about half of the repositories in the corpus (corresponding to about 2/3 of the sliders) as a training set, and optimized the weights against this corpus using a crude automated search of the parameter space to get the best agreement with the manually-determined values. Then I tested the resulting heuristic against the full corpus. The results are summarized in the following table, in column `indent-1`: | repository | count | Git 2.9.0 | compaction | compaction-fixed | indent-1 | indent-2 | | --------------------- | ----- | -------------- | -------------- | ---------------- | -------------- | -------------- | | afnetworking | 109 | 89 (81.7%) | 37 (33.9%) | 37 (33.9%) | 2 (1.8%) | 2 (1.8%) | | alamofire | 30 | 18 (60.0%) | 14 (46.7%) | 15 (50.0%) | 0 (0.0%) | 0 (0.0%) | | angular | 184 | 127 (69.0%) | 39 (21.2%) | 23 (12.5%) | 5 (2.7%) | 5 (2.7%) | | animate | 313 | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | | ant | 380 | 356 (93.7%) | 152 (40.0%) | 148 (38.9%) | 15 (3.9%) | 15 (3.9%) | * | bugzilla | 306 | 263 (85.9%) | 109 (35.6%) | 99 (32.4%) | 14 (4.6%) | 15 (4.9%) | * | corefx | 126 | 91 (72.2%) | 22 (17.5%) | 21 (16.7%) | 6 (4.8%) | 6 (4.8%) | | couchdb | 78 | 44 (56.4%) | 26 (33.3%) | 28 (35.9%) | 6 (7.7%) | 6 (7.7%) | * | cpython | 937 | 158 (16.9%) | 50 (5.3%) | 49 (5.2%) | 5 (0.5%) | 5 (0.5%) | * | discourse | 160 | 95 (59.4%) | 42 (26.2%) | 36 (22.5%) | 18 (11.2%) | 13 (8.1%) | | docker | 307 | 194 (63.2%) | 198 (64.5%) | 253 (82.4%) | 8 (2.6%) | 8 (2.6%) | * | electron | 163 | 132 (81.0%) | 38 (23.3%) | 39 (23.9%) | 6 (3.7%) | 6 (3.7%) | | git | 536 | 470 (87.7%) | 73 (13.6%) | 78 (14.6%) | 16 (3.0%) | 16 (3.0%) | * | gitflow | 127 | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | | ionic | 133 | 89 (66.9%) | 29 (21.8%) | 38 (28.6%) | 1 (0.8%) | 1 (0.8%) | | ipython | 482 | 362 (75.1%) | 167 (34.6%) | 169 (35.1%) | 11 (2.3%) | 11 (2.3%) | * | junit | 161 | 147 (91.3%) | 67 (41.6%) | 66 (41.0%) | 1 (0.6%) | 1 (0.6%) | * | lighttable | 15 | 5 (33.3%) | 0 (0.0%) | 2 (13.3%) | 0 (0.0%) | 0 (0.0%) | | magit | 88 | 75 (85.2%) | 11 (12.5%) | 9 (10.2%) | 1 (1.1%) | 0 (0.0%) | | neural-style | 28 | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | | nodejs | 781 | 649 (83.1%) | 118 (15.1%) | 111 (14.2%) | 4 (0.5%) | 5 (0.6%) | * | phpmyadmin | 491 | 481 (98.0%) | 75 (15.3%) | 48 (9.8%) | 2 (0.4%) | 2 (0.4%) | * | react-native | 168 | 130 (77.4%) | 79 (47.0%) | 81 (48.2%) | 0 (0.0%) | 0 (0.0%) | | rust | 171 | 128 (74.9%) | 30 (17.5%) | 27 (15.8%) | 16 (9.4%) | 14 (8.2%) | | spark | 186 | 149 (80.1%) | 52 (28.0%) | 52 (28.0%) | 2 (1.1%) | 2 (1.1%) | | tensorflow | 115 | 66 (57.4%) | 48 (41.7%) | 48 (41.7%) | 5 (4.3%) | 5 (4.3%) | | test-more | 19 | 15 (78.9%) | 2 (10.5%) | 2 (10.5%) | 1 (5.3%) | 1 (5.3%) | * | test-unit | 51 | 34 (66.7%) | 14 (27.5%) | 8 (15.7%) | 2 (3.9%) | 2 (3.9%) | * | xmonad | 23 | 22 (95.7%) | 2 (8.7%) | 2 (8.7%) | 1 (4.3%) | 1 (4.3%) | * | --------------------- | ----- | -------------- | -------------- | ---------------- | -------------- | -------------- | | totals | 6668 | 4391 (65.9%) | 1496 (22.4%) | 1491 (22.4%) | 150 (2.2%) | 144 (2.2%) | | totals (training set) | 4552 | 3195 (70.2%) | 1053 (23.1%) | 1061 (23.3%) | 86 (1.9%) | 88 (1.9%) | | totals (test set) | 2116 | 1196 (56.5%) | 443 (20.9%) | 430 (20.3%) | 64 (3.0%) | 56 (2.6%) | In this table, the numbers are the count and percentage of human-rated sliders that the corresponding algorithm got *wrong*. The columns are * "repository" - the name of the repository used. I used the diffs between successive non-merge commits on the HEAD branch of the corresponding repository. * "count" - the number of sliders that were human-rated. I chose most, but not all, sliders to rate from those among which the various algorithms gave different answers. * "Git 2.9.0" - the default algorithm used by `git diff` in Git 2.9.0. * "compaction" - the heuristic used by `git diff --compaction-heuristic` in Git 2.9.0. * "compaction-fixed" - the heuristic used by `git diff --compaction-heuristic` after the fixes from earlier in this patch series. Note that the results are not dramatically different than those for "compaction". Both produce non-ideal diffs only about 1/3 as often as the default `git diff`. * "indent-1" - the new `--indent-heuristic` algorithm, using the first set of weighting factors, determined as described above. * "indent-2" - the new `--indent-heuristic` algorithm, using the final set of weighting factors, determined as described below. * `*` - indicates that repo was part of training set used to determine the first set of weighting factors. The fact that the heuristic performed nearly as well on the test set as on the training set in column "indent-1" is a good indication that the heuristic was not over-trained. Given that fact, I ran a second round of optimization, using the entire corpus as the training set. The resulting set of weights gave the results in column "indent-2". These are the weights included in this patch. The final result gives consistently and significantly better results across the whole corpus than either `git diff` or `git diff --compaction-heuristic`. It makes only about 1/30 as many errors as the former and about 1/10 as many errors as the latter. (And a good fraction of the remaining errors are for diffs that involve weirdly-formatted code, sometimes apparently machine-generated.) The tools that were used to do this optimization and analysis, along with the human-generated data values, are recorded in a separate project [1]. This patch adds a new command-line option `--indent-heuristic`, and a new configuration setting `diff.indentHeuristic`, that activate this heuristic. This interface is only meant for testing purposes, and should be finalized before including this change in any release. [1] https://github.com/mhagger/diff-slider-tools Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-31diff: teach diff to display submodule difference with an inline diffLibravatar Jacob Keller1-7/+10
Teach git-diff and friends a new format for displaying the difference of a submodule. The new format is an inline diff of the contents of the submodule between the commit range of the update. This allows the user to see the actual code change caused by a submodule update. Add tests for the new format and option. Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-31graph: add support for --line-prefix on all graph-aware outputLibravatar Jacob Keller1-0/+3
Add an extension to git-diff and git-log (and any other graph-aware displayable output) such that "--line-prefix=<string>" will print the additional line-prefix on every line of output. To make this work, we have to fix a few bugs in the graph API that force graph_show_commit_msg to be used only when you have a valid graph. Additionally, we extend the default_diff_output_prefix handler to work even when no graph is enabled. This is somewhat of a hack on top of the graph API, but I think it should be acceptable here. This will be used by a future extension of submodule display which displays the submodule diff as the actual diff between the pre and post commit in the submodule project. Add some tests for both git-log and git-diff to ensure that the prefix is honored correctly. Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-25Merge branch 'jc/doc-diff-filter-exclude'Libravatar Junio C Hamano1-0/+3
Belated doc update for a feature added in v1.8.5. * jc/doc-diff-filter-exclude: diff: document diff-filter exclusion
2016-07-14diff: document diff-filter exclusionLibravatar Junio C Hamano1-0/+3
In v1.8.5 days, 7f2ea5f0 (diff: allow lowercase letter to specify what change class to exclude, 2013-07-17) taught the "--diff-filter" mechanism to take lowercase letters as exclusion, but we forgot to document it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-10Merge branch 'jk/diff-compact-heuristic'Libravatar Junio C Hamano1-0/+7
It turns out that the earlier effort to update the heuristics may want to use a bit more time to mature. Turn it off by default. * jk/diff-compact-heuristic: diff: disable compaction heuristic for now
2016-06-10diff: disable compaction heuristic for nowLibravatar Junio C Hamano1-0/+7
http://lkml.kernel.org/g/20160610075043.GA13411@sigill.intra.peff.net reports that a change to add a new "function" with common ending with the existing one at the end of the file is shown like this: def foo do_foo_stuff() + common_ending() +end + +def bar + do_bar_stuff() + common_ending() end when the new heuristic is in use. In reality, the change is to add the blank line before "def bar" and everything below, which is what the code without the new heuristic shows. Disable the heuristics by default, and resurrect the documentation for the option and the configuration variables, while clearly marking the feature as still experimental. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-09Documentation: fix linkgit referencesLibravatar Junio C Hamano1-1/+1
There are a handful of incorrect "linkgit:<page>[<section>]" instances in our documentation set. * Some have an extra colon after "linkgit:"; fix them by removing the extra colon; * Some refer to a page outside the Git suite, namely curl(1); fix them by using the `curl(1)` that already appears on the same page for the same purpose of referring the readers to its manual page. * Some spell the name of the page incorrectly, e.g. "rev-list" when they mean "git-rev-list"; fix them. * Some list the manual section incorrectly; fix them to make sure they match what is at the top of the target of the link. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-02Merge branch 'es/format-patch-doc-hide-no-patch' into maintLibravatar Junio C Hamano1-1/+1
"git format-patch --help" showed `-s` and `--no-patch` as if these are valid options to the command. We already hide `--patch` option from the documentation, because format-patch is about showing the diff, and the documentation now hides these options as well. * es/format-patch-doc-hide-no-patch: git-format-patch.txt: don't show -s as shorthand for multiple options
2016-05-02diff: undocument the compaction heuristic knobs for experimentationLibravatar Junio C Hamano1-6/+0
It seems that people around here are all happy with the updated heuristics used to decide where the hunks are separated. Let's keep that as the default. Even though we do not expect too much trouble from the difference between the old and the new algorithms, just in case let's leave the implementation of the knobs to turn it off for emergencies. There is no longer need for documenting them, though. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-19xdiff: implement empty line chunk heuristicLibravatar Stefan Beller1-0/+6
In order to produce the smallest possible diff and combine several diff hunks together, we implement a heuristic from GNU Diff which moves diff hunks forward as far as possible when we find common context above and below a diff hunk. This sometimes produces less readable diffs when writing C, Shell, or other programming languages, ie: ... /* + * + * + */ + +/* ... instead of the more readable equivalent of ... +/* + * + * + */ + /* ... Implement the following heuristic to (optionally) produce the desired output. If there are diff chunks which can be shifted around, shift each hunk such that the last common empty line is below the chunk with the rest of the context above. This heuristic appears to resolve the above example and several other common issues without producing significantly weird results. However, as with any heuristic it is not really known whether this will always be more optimal. Thus, it can be disabled via diff.compactionHeuristic. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-04git-format-patch.txt: don't show -s as shorthand for multiple optionsLibravatar Eric Sunshine1-1/+1
git-format-patch recognizes -s as shorthand only for --signoff, however, its documentation shows -s as shorthand for both --signoff and --no-patch. Resolve this confusion by suppressing the bogus -s shorthand for --no-patch. While here, also avoid showing the --no-patch option in git-format-patch documentation since it doesn't make sense to ask to suppress the patch while at the same time explicitly asking to format the patch (which, after all, is the purpose of git-format-patch). Reported-by: Kevin Brodsky <corax26@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-29Documentation: git diff --check detects conflict markersLibravatar Ori Avtalion1-2/+2
Signed-off-by: Ori Avtalion <ori@avtalion.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-24Documentation/diff: give --word-diff-regex=. exampleLibravatar Michael J Gruber1-0/+3
It's just so useful. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Jeff King <peff@peff.net>
2015-06-16Merge branch 'mm/log-format-raw-doc' into maintLibravatar Junio C Hamano1-1/+10
Clarify that "log --raw" and "log --format=raw" are unrelated concepts. * mm/log-format-raw-doc: Documentation/log: clarify sha1 non-abbreviation in log --raw Documentation/log: clarify what --raw means
2015-06-11Merge branch 'jc/diff-ws-error-highlight'Libravatar Junio C Hamano1-0/+10
Allow whitespace breakages in deleted and context lines to be also painted in the output. * jc/diff-ws-error-highlight: diff.c: --ws-error-highlight=<kind> option diff.c: add emit_del_line() and emit_context_line() t4015: separate common setup and per-test expectation t4015: modernise style
2015-06-05Merge branch 'jk/asciidoc-markup-fix' into maintLibravatar Junio C Hamano1-2/+6
Various documentation mark-up fixes to make the output more consistent in general and also make AsciiDoctor (an alternative formatter) happier. * jk/asciidoc-markup-fix: doc: convert AsciiDoc {?foo} to ifdef::foo[] doc: put example URLs and emails inside literal backticks doc: drop backslash quoting of some curly braces doc: convert \--option to --option doc/add: reformat `--edit` option doc: fix length of underlined section-title doc: fix hanging "+"-continuation doc: fix unquoted use of "{type}" doc: fix misrendering due to `single quote'
2015-06-01Merge branch 'mm/log-format-raw-doc'Libravatar Junio C Hamano1-1/+10
Clarify that "log --raw" and "log --format=raw" are unrelated concepts. * mm/log-format-raw-doc: Documentation/log: clarify sha1 non-abbreviation in log --raw Documentation/log: clarify what --raw means
2015-05-26diff.c: --ws-error-highlight=<kind> optionLibravatar Junio C Hamano1-0/+10
Traditionally, we only cared about whitespace breakages introduced in new lines. Some people want to paint whitespace breakages on old lines, too. When they see a whitespace breakage on a new line, they can spot the same kind of whitespace breakage on the corresponding old line and want to say "Ah, those breakages are there but they were inherited from the original, so let's not touch them for now." Introduce `--ws-error-highlight=<kind>` option, that lets them pass a comma separated list of `old`, `new`, and `context` to specify what lines to highlight whitespace errors on. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-22Merge branch 'jk/asciidoc-markup-fix'Libravatar Junio C Hamano1-2/+6
Various documentation mark-up fixes to make the output more consistent in general and also make AsciiDoctor (an alternative formatter) happier. * jk/asciidoc-markup-fix: doc: convert AsciiDoc {?foo} to ifdef::foo[] doc: put example URLs and emails inside literal backticks doc: drop backslash quoting of some curly braces doc: convert \--option to --option doc/add: reformat `--edit` option doc: fix length of underlined section-title doc: fix hanging "+"-continuation doc: fix unquoted use of "{type}" doc: fix misrendering due to `single quote'
2015-05-18Documentation/log: clarify what --raw meansLibravatar Matthieu Moy1-1/+10
There are several "raw formats", and describing --raw as "Generate the raw format" in the documentation for git-log seems to imply that it generates the raw *log* format. Clarify the wording by saying "raw diff format" explicitly, and make a special-case for "git log": "git log --raw" does not just change the format, it shows something which is not shown by default. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-14doc: convert AsciiDoc {?foo} to ifdef::foo[]Libravatar Jeff King1-2/+6
The former seems to just be syntactic sugar for the latter. And as it's sugar that AsciiDoctor doesn't understand, it would be nice to avoid it. Since there are only two spots, and the resulting source is not significantly harder to read, it's worth doing. Note that this does slightly affect the generated HTML (it has an extra newline), but the rendered result for both HTML and docbook should be the same (since the newline is not syntactically significant there). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-13*config.txt: stick to camelCase naming conventionLibravatar Nguyễn Thái Ngọc Duy1-2/+2
This should improve readability. Compare "thislongname" and "thisLongName". The following keys are left in unchanged. We can decide what to do with them later. - am.keepcr - core.autocrlf .safecrlf .trustctime - diff.dirstat .noprefix - gitcvs.usecrlfattr - gui.blamehistoryctx .trustmtime - pull.twohead - receive.autogc - sendemail.signedoffbycc .smtpsslcertpath .suppresscc Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-31Documentation: fix misuses of "nor"Libravatar Justin Lebar1-1/+1
Signed-off-by: Justin Lebar <jlebar@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-18diff: add diff.orderfile configuration variableLibravatar Samuel Bronson1-0/+3
diff.orderfile acts as a default for the -O command line option. [sb: split up aw's original patch; rework tests and docs, treat option as pathname] Signed-off-by: Anders Waldenborg <anders@0x63.nu> Signed-off-by: Samuel Bronson <naesten@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-22Merge branch 'mm/diff-no-patch-synonym-to-s'Libravatar Junio C Hamano1-0/+5
"git show -s" was less discoverable than it should be. * mm/diff-no-patch-synonym-to-s: Documentation/git-log.txt: capitalize section names Documentation: move description of -s, --no-patch to diff-options.txt Documentation/git-show.txt: include common diff options, like git-log.txt diff: allow --patch & cie to override -s/--no-patch diff: allow --no-patch as synonym for -s t4000-diff-format.sh: modernize style
2013-07-17Documentation: move description of -s, --no-patch to diff-options.txtLibravatar Matthieu Moy1-0/+5
Technically, "-s, --no-patch" is implemented in diff.c ("git diff --no-patch" is essentially useless, but valid). From the user point of view, this allows the documentation to show up in "git show --help", which is one of the most useful use of the option. While we're there, add a sentence explaining why the option can be useful. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-12Merge branch 'ft/diff-rename-default-score-is-half'Libravatar Junio C Hamano1-1/+1
* ft/diff-rename-default-score-is-half: diff-options: document default similarity index
2013-07-05diff-options: document default similarity indexLibravatar Fraser Tweedale1-1/+1
The default similarity index of 50% is documented in gitdiffcore(7) but it is worth also mentioning it in the description of the -M/--find-renames option. Signed-off-by: Fraser Tweedale <frase@frase.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-30Merge branch 'ap/diff-ignore-blank-lines'Libravatar Junio C Hamano1-0/+3
"git diff" learned a mode that ignores hunks whose change consists only of additions and removals of blank lines, which is the same as "diff -B" (ignore blank lines) of GNU diff. * ap/diff-ignore-blank-lines: diff: add --ignore-blank-lines option
2013-06-19diff: add --ignore-blank-lines optionLibravatar Antoine Pelisse1-0/+3
The goal of the patch is to introduce the GNU diff -B/--ignore-blank-lines as closely as possible. The short option is not available because it's already used for "break-rewrites". When this option is used, git-diff will not create hunks that simply add or remove empty lines, but will still show empty lines addition/suppression if they are close enough to "valuable" changes. There are two differences between this option and GNU diff -B option: - GNU diff doesn't have "--inter-hunk-context", so this must be handled - The following sequence looks like a bug (context is displayed twice): $ seq 5 >file1 $ cat <<EOF >file2 change 1 2 3 4 5 change EOF $ diff -u -B file1 file2 --- file1 2013-06-08 22:13:04.471517834 +0200 +++ file2 2013-06-08 22:13:23.275517855 +0200 @@ -1,5 +1,7 @@ +change 1 2 + 3 4 5 @@ -3,3 +5,4 @@ 3 4 5 +change So here is a more thorough description of the option: - real changes are interesting - blank lines that are close enough (less than context size) to interesting changes are considered interesting (recursive definition) - "context" lines are used around each hunk of interesting changes - If two hunks are separated by less than "inter-hunk-context", they will be merged into one. The implementation does the "interesting changes selection" in a single pass. Signed-off-by: Antoine Pelisse <apelisse@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-11Merge branch 'rr/diffcore-pickaxe-doc'Libravatar Junio C Hamano1-8/+30
Update the low-level diffcore documentation on -S/-G and --pickaxe-all. * rr/diffcore-pickaxe-doc: diffcore-pickaxe doc: document -S and -G properly diffcore-pickaxe: make error messages more consistent
2013-06-03diffcore-pickaxe doc: document -S and -G properlyLibravatar Ramkumar Ramachandra1-8/+30
The documentation of -S and -G is very sketchy. Completely rewrite the sections in Documentation/diff-options.txt and Documentation/gitdiffcore.txt. References: 52e9578 ([PATCH] Introducing software archaeologist's tool "pickaxe".) f506b8e (git log/diff: add -G<regexp> that greps in the patch text) Inputs-from: Phil Hord <phil.hord@gmail.com> Co-authored-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-28trivial: Add missing period in documentationLibravatar Phil Hord1-1/+1
Signed-off-by: Phil Hord <hordp@cisco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-25Merge branch 'maint-1.8.1' into maintLibravatar Junio C Hamano1-2/+2
* maint-1.8.1: bundle: Add colons to list headings in "verify" bundle: Fix "verify" output if history is complete Documentation: filter-branch env-filter example git-filter-branch.txt: clarify ident variables usage git-compat-util.h: Provide missing netdb.h definitions describe: Document --match pattern format Documentation/githooks: Explain pre-rebase parameters update-index: list supported idx versions and their features diff-options: unconfuse description of --color read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr() index-format.txt: mention of v4 is missing in some places
2013-03-25Merge branch 'jc/color-diff-doc' into maint-1.8.1Libravatar Junio C Hamano1-2/+2
The "--color=<when>" argument to the commands in the diff family was described poorly. * jc/color-diff-doc: diff-options: unconfuse description of --color
2013-03-19Merge branch 'jc/color-diff-doc'Libravatar Junio C Hamano1-2/+2
The --color[=<when>] option to the diff family was documented in a confusing way. * jc/color-diff-doc: diff-options: unconfuse description of --color
2013-02-22diff-options: unconfuse description of --colorLibravatar Junio C Hamano1-2/+2
It said "by default it is off" while it also said "the default is always", which confused everybody who read it only once. It wanted to say (1) if you do not say --color, it is not enabled, and (2) if you say --color but do not say when to enable it, it will always be enabled". Rephrase to clarify by using "default" only once. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-17Merge branch 'mp/diff-algo-config'Libravatar Junio C Hamano1-0/+20
Add diff.algorithm configuration so that the user does not type "diff --histogram". * mp/diff-algo-config: diff: Introduce --diff-algorithm command line option config: Introduce diff.algorithm variable git-completion.bash: Autocomplete --minimal and --histogram for git-diff
2013-02-01Documentation: the name of the system is 'Git', not 'git'Libravatar Thomas Ackermann1-2/+2
Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-16diff: Introduce --diff-algorithm command line optionLibravatar Michal Privoznik1-0/+20
Since command line options have higher priority than config file variables and taking previous commit into account, we need a way how to specify myers algorithm on command line. However, inventing `--myers` is not the right answer. We need far more general option, and that is `--diff-algorithm`. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-18Sync with 'maint'Libravatar Junio C Hamano1-1/+5
2012-12-18clarify -M without % symbol in diff-optionsLibravatar Sitaram Chamarty1-1/+5
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-11-18diff: introduce diff.submodule configuration variableLibravatar Ramkumar Ramachandra1-1/+2
Introduce a diff.submodule configuration variable corresponding to the '--submodule' command-line option of 'git diff'. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>