| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git merge" learned to selectively omit " into <branch>" at the end
of the title of default merge message with merge.suppressDest
configuration.
* jc/fmt-merge-msg-suppress-destination:
fmt-merge-msg: allow merge destination to be omitted again
Revert "fmt-merge-msg: stop treating `master` specially"
|
|
In Git 2.28, we stopped special casing 'master' when producing the
default merge message by just removing the code to squelch "into
'master'" at the end of the message.
Introduce multi-valued merge.suppressDest configuration variable
that gives a set of globs to match against the name of the branch
into which the merge is being made, to let users specify for which
branch fmt-merge-msg's output should be shortened. When it is not
set, 'master' is used as the sole value of the variable by default.
The above move mostly reverts the pre-2.28 default in repositories
that have no relevant configuration.
Add a few tests to protect the behaviour with the new configuration
variable from future regression.
Helped-by: Linus Torvalds <torvalds@linux-foundation.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fetch.writeCommitGraph feature makes fetches write out a commit
graph file for the newly downloaded pack on fetch. This improves the
performance of various commands that would perform a revision walk and
eventually ought to be the default for everyone. To prepare for that
future, it's enabled by default for users that set
feature.experimental=true to experience such future defaults.
Alas, for --unshallow fetches from a shallow clone it runs into a
snag: by the time Git has fetched the new objects and is writing a
commit graph, it has performed a revision walk and r->parsed_objects
contains information about the shallow boundary from *before* the
fetch. The commit graph writing code is careful to avoid writing a
commit graph file in shallow repositories, but the new state is not
shallow, and the result is that from that point on, commands like "git
log" make use of a newly written commit graph file representing a
fictional history with the old shallow boundary.
We could fix this by making the commit graph writing code more careful
to avoid writing a commit graph that could have used any grafts or
shallow state, but it is possible that there are other pieces of
mutated state that fetch's commit graph writing code may be relying
on. So disable it in the feature.experimental configuration.
Google developers have been running in this configuration (by setting
fetch.writeCommitGraph=false in the system config) to work around this
bug since it was discovered in April. Once the fix lands, we'll
enable fetch.writeCommitGraph=true again to give it some early testing
before rolling out to a wider audience.
In other words:
- this patch only affects behavior with feature.experimental=true
- it makes feature.experimental match the configuration Google has
been using for the last few months, meaning it would leave users in
a better tested state than without it
- this should improve testing for other features guarded by
feature.experimental, by making feature.experimental safer to use
Reported-by: Jay Conrod <jayconrod@google.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cloning a repository without any branches, Git chooses a default
branch name for the as-yet unborn branch.
As part of the implicit initialization of the local repository, Git just
learned to respect `init.defaultBranch` to choose a different initial
branch name. We now really want that branch name to be used as a
fall-back.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We just introduced the command-line option
`--initial-branch=<branch-name>` to allow initializing a new repository
with a different initial branch than the hard-coded one.
To allow users to override the initial branch name more permanently
(i.e. without having to specify the name manually for each and every
`git init` invocation), let's introduce the `init.defaultBranch` config
setting.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Don Goodman-Wilson <don@goodman-wilson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commands in the "diff" family learned to honor "diff.relative"
configuration variable.
* la/diff-relative-config:
diff: add config option relative
|
|
The `diff.relative` boolean option set to `true` shows only changes in
the current directory/value specified by the `path` argument of the
`relative` option and shows pathnames relative to the aforementioned
directory.
Teach `--no-relative` to override earlier `--relative`
Add for git-format-patch(1) options documentation `--relative` and
`--no-relative`
Signed-off-by: Laurent Arnoud <laurent@spkdev.net>
Acked-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git 2.26 used protocol v2 as its default protocol, but soon after
release, users noticed that the protocol v2 negotiation code was prone
to fail when fetching from some remotes that are far ahead of others
(such as linux-next.git versus Linus's linux.git). That has been
fixed by 0b07eecf6ed (Merge branch 'jt/v2-fetch-nego-fix',
2020-05-01), but to be cautious, we are using protocol v0 as the
default in 2.27 to buy some time for any other unanticipated issues to
surface.
To that end, let's ensure that users requesting the bleeding edge
using the feature.experimental flag *do* get protocol v2. This way,
we can gain experience with a wider audience for the new protocol
version and be more confident when it is time to enable it by default
for all users in some future Git version.
Implementation note: this isn't with the rest of the
feature.experimental options in repo-settings.c because those are tied
to a repository object, whereas this code path is used for operations
like "git ls-remote" that do not require a repository.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* bc/doc-credential-helper-value:
docs: document credential.helper allowed values
|
|
gitcredentials(7) already mentions several possible invocations that one
can use as the value for credential.helper. However, many people are
not aware that there are other options than a simple credential helper
name, so let's place some explanatory text in the documentation for
credential.helper as well.
We still refer the user to gitcredential(7) for additional explanations
and helpful examples.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge" learns the "--autostash" option.
* dl/merge-autostash: (22 commits)
pull: pass --autostash to merge
t5520: make test_pull_autostash() accept expect_parent_num
merge: teach --autostash option
sequencer: implement apply_autostash_oid()
sequencer: implement save_autostash()
sequencer: unlink autostash in apply_autostash()
sequencer: extract perform_autostash() from rebase
rebase: generify create_autostash()
rebase: extract create_autostash()
reset: extract reset_head() from rebase
rebase: generify reset_head()
rebase: use apply_autostash() from sequencer.c
sequencer: rename stash_sha1 to stash_oid
sequencer: make apply_autostash() accept a path
rebase: use read_oneliner()
sequencer: make read_oneliner() extern
sequencer: configurably warn on non-existent files
sequencer: make read_oneliner() accept flags
sequencer: make file exists check more efficient
sequencer: stop leaking buf
...
|
|
Those fetching over protocol v2 from linux-next and other kernel
repositories are reporting that v2 often fetches way too much than
needed.
* jn/demote-proto2-from-default:
Revert "fetch: default to protocol version 2"
|
|
The "--decorate-refs" and "--decorate-refs-exclude" options "git
log" takes have learned a companion configuration variable
log.excludeDecoration that sits at the lowest priority in the
family.
* ds/log-exclude-decoration-config:
log: add log.excludeDecoration config option
log-tree: make ref_filter_match() a helper method
|
|
Documentation updates around the "--recurse-submodules" option.
* dr/doc-recurse-submodules:
doc: --recurse-submodules mostly applies to active submodules
doc: be more precise on (fetch|push).recurseSubmodules
doc: explain how to deactivate submodule.recurse completely
doc: document --recurse-submodules for reset and restore
doc: list all commands affected by submodule.recurse
|
|
The output from "git format-patch" uses RFC 2047 encoding for
non-ASCII letters on From: and Subject: headers, so that it can
directly be fed to e-mail programs. A new option has been added
to produce these headers in raw.
* eb/format-patch-no-encode-headers:
format-patch: teach --no-encode-email-headers
|
|
Trace2 enhancement to allow logging of the environment variables.
* js/trace2-env-vars:
trace2: teach Git to log environment variables
|
|
This reverts commit 684ceae32dae726c6a5c693b257b156926aba8b7.
Users fetching from linux-next and other kernel remotes are reporting
that the limited ref advertisement causes negotiation to reach
MAX_IN_VAIN, resulting in too-large fetches.
Reported-by: Lubomir Rintel <lkundrak@v3.sk>
Reported-by: "Dixit, Ashutosh" <ashutosh.dixit@intel.com>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 'git log', the --decorate-refs-exclude option appends a pattern
to a string_list. This list is used to prevent showing some refs
in the decoration output, or even by --simplify-by-decoration.
Users may want to use their refs space to store utility refs that
should not appear in the decoration output. For example, Scalar [1]
runs a background fetch but places the "new" refs inside the
refs/scalar/hidden/<remote>/* refspace instead of refs/<remote>/*
to avoid updating remote refs when the user is not looking. However,
these "hidden" refs appear during regular 'git log' queries.
A similar idea to use "hidden" refs is under consideration for core
Git [2].
Add the 'log.excludeDecoration' config option so users can exclude
some refs from decorations by default instead of needing to use
--decorate-refs-exclude manually. The config value is multi-valued
much like the command-line option. The documentation is careful to
point out that the config value can be overridden by the
--decorate-refs option, even though --decorate-refs-exclude would
always "win" over --decorate-refs.
Since the 'log.excludeDecoration' takes lower precedence to
--decorate-refs, and --decorate-refs-exclude takes higher
precedence, the struct decoration_filter needed another field.
This led also to new logic in load_ref_decorations() and
ref_filter_match().
There are several tests in t4202-log.sh that test the
--decorate-refs-(include|exclude) options, so these are extended.
Since the expected output is already stored as a file, most tests
could simply replace a "--decorate-refs-exclude" option with an
in-line config setting. Other tests involve the precedence of
the config option compared to command-line options and needed more
modification.
[1] https://github.com/microsoft/scalar
[2] https://lore.kernel.org/git/77b1da5d3063a2404cd750adfe3bb8be9b6c497d.1585946894.git.gitgitgadget@gmail.com/
Helped-by: Junio C Hamano <gister@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In rebase, one can pass the `--autostash` option to cause the worktree
to be automatically stashed before continuing with the rebase. This
option is missing in merge, however.
Implement the `--autostash` option and corresponding `merge.autoStash`
option in merge which stashes before merging and then pops after.
This option is useful when a developer has some local changes on a topic
branch but they realize that their work depends on another branch.
Previously, they had to run something like
git fetch ...
git stash push
git merge FETCH_HEAD
git stash pop
but now, that is reduced to
git fetch ...
git merge --autostash FETCH_HEAD
When an autostash is generated, it is automatically reapplied to the
worktree only in three explicit situations:
1. An incomplete merge is commit using `git commit`.
2. A merge completes successfully.
3. A merge is aborted using `git merge --abort`.
In all other situations where the merge state is removed using
remove_merge_branch_state() such as aborting a merge via
`git reset --hard`, the autostash is saved into the stash reflog
instead keeping the worktree clean.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Suggested-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When commit subjects or authors have non-ASCII characters, git
format-patch Q-encodes them so they can be safely sent over email.
However, if the patch transfer method is something other than email (web
review tools, sneakernet), this only serves to make the patch metadata
harder to read without first applying it (unless you can decode RFC 2047
in your head). git am as well as some email software supports
non-Q-encoded mail as described in RFC 6531.
Add --[no-]encode-email-headers and format.encodeEmailHeaders to let the
user control this behavior.
Signed-off-by: Emma Brooks <me@pluvano.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default value also depends on the value of submodule.recurse.
Use this opportunity to correct some grammar mistakes in
Documentation/config/fetch.txt signaled by Robert P. J. Day.
Also mention `fetch.recurseSubmodules` in fetch-options.txt. In
git-push.txt, `push.recurseSubmodules` is implicitly mentioned (by
explaining how to disable it), so no need to add it there.
Lastly add a link to `git-fetch` in `git-pull.txt` to explain the
meaning of `--recurse-submodules` there.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Note that `ls-files` is not affected, even though it has a
`--recurse-submodules` option, so list it as an exception too.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'pack.useSparse' configuration variable now defaults to 'true',
enabling an optimization that has been experimental since Git 2.21.
* ds/default-pack-use-sparse-to-true:
pack-objects: flip the use of GIT_TEST_PACK_SPARSE
config: set pack.useSparse=true by default
|
|
"git stash" has kept an escape hatch to use the scripted version
for a few releases, which got stale. It has been removed.
* tg/retire-scripted-stash:
stash: remove the stash.useBuiltin setting
stash: get git_stash_config at the top level
|
|
Improve the structure of the documentation source a bit.
* jc/config-tar:
separate tar.* config to its own source file
|
|
A handful of options to configure SSL when talking to proxies have
been added.
* js/https-proxy-config:
http: add environment variable support for HTTPS proxies
http: add client cert support for HTTPS proxies
|
|
Via trace2, Git can already log interesting config parameters (see the
trace2_cmd_list_config() function). However, this can grant an
incomplete picture because many config parameters also allow overrides
via environment variables.
To allow for more complete logs, we add a new trace2_cmd_list_env_vars()
function and supporting implementation, modeled after the pre-existing
config param logging implementation.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pack.useSparse config option was introduced by 3d036eb0
(pack-objects: create pack.useSparse setting, 2019-01-19) and was
first available in v2.21.0. When enabled, the pack-objects process
during 'git push' will use a sparse tree walk when deciding which
trees and blobs to send to the remote. The algorithm was introduced
by d5d2e93 (revision: implement sparse algorithm, 2019-01-16) and
has been in production use by VFS for Git since around that time.
The features.experimental config option also enabled pack.useSparse,
so hopefully that has also increased exposure.
It is worth noting that pack.useSparse has a possibility of
sending more objects across a push, but requires a special
arrangement of exact _copies_ across directories. There is a test
in t5322-pack-objects-sparse.sh that demonstrates this possibility.
This test uses the --sparse option to "git pack-objects" but we
can make it implied by the config value to demonstrate that the
default value has changed.
While updating that test, I noticed that the documentation did not
include an option for --no-sparse, which is now more important than
it was before.
Since the downside is unlikely but the upside is significant, set
the default value of pack.useSparse to true. Remove it from the
set of options implied by features.experimental.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even though there is only one configuration variable in the
namespace, it is not quite right to have tar.umask described
among the variables for tag.* namespace.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc markup fix.
* jk/push-option-doc-markup-fix:
doc/config/push: use longer "--" line for preformatted example
|
|
Remove the stash.useBuiltin setting which was added as an escape hatch
to disable the builtin version of stash first released with Git 2.22.
Carrying the legacy version is a maintenance burden, and has in fact
become out of date failing a test since the 2.23 release, without
anyone noticing until now. So users would be getting a hint to fall
back to a potentially buggy version of the tool.
We used to shell out to git config to get the useBuiltin configuration
to avoid changing any global state before spawning legacy-stash.
However that is no longer necessary, so just use the 'git_config'
function to get the setting instead.
Similar to what we've done in d03ebd411c ("rebase: remove the
rebase.useBuiltin setting", 2019-03-18), where we remove the
corresponding setting for rebase, we leave the documentation in place,
so people can refer back to it when searching for it online, and so we
can refer to it in the commit message.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add 4 environment variables that can be used to configure the proxy
cert, proxy ssl key, the proxy cert password protected flag, and the
CA info for the proxy.
Documentation for the options was also updated.
Signed-off-by: Jorge Lopez Silva <jalopezsilva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git supports performing connections to HTTPS proxies, but we don't
support doing mutual authentication with them (through TLS).
Add the necessary options to be able to send a client certificate to
the HTTPS proxy.
A client certificate can provide an alternative way of authentication
instead of using 'ProxyAuthorization' or other more common methods of
authentication. Libcurl supports this functionality already, so changes
are somewhat minimal. The feature is guarded by the first available
libcurl version that supports these options.
4 configuration options are added and documented, cert, key, cert
password protected and CA info. The CA info should be used to specify a
different CA path to validate the HTTPS proxy cert.
Signed-off-by: Jorge Lopez Silva <jalopezsilva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" has learned to use the merge backend (i.e. the
machinery that drives "rebase -i") by default, while allowing
"--apply" option to use the "apply" backend (e.g. the moral
equivalent of "format-patch piped to am"). The rebase.backend
configuration variable can be set to customize.
* en/rebase-backend:
rebase: rename the two primary rebase backends
rebase: change the default backend from "am" to "merge"
rebase: make the backend configurable via config setting
rebase tests: repeat some tests using the merge backend instead of am
rebase tests: mark tests specific to the am-backend with --am
rebase: drop '-i' from the reflog for interactive-based rebases
git-prompt: change the prompt for interactive-based rebases
rebase: add an --am option
rebase: move incompatibility checks between backend options a bit earlier
git-rebase.txt: add more details about behavioral differences of backends
rebase: allow more types of rebases to fast-forward
t3432: make these tests work with either am or merge backends
rebase: fix handling of restrict_revision
rebase: make sure to pass along the quiet flag to the sequencer
rebase, sequencer: remove the broken GIT_QUIET handling
t3406: simplify an already simple test
rebase (interactive-backend): fix handling of commits that become empty
rebase (interactive-backend): make --keep-empty the default
t3404: directly test the behavior of interest
git-rebase.txt: update description of --allow-empty-message
|
|
Doc markup fix.
* jk/push-option-doc-markup-fix:
doc/config/push: use longer "--" line for preformatted example
|
|
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
|
|
The example for the push.pushOption config tries to create a
preformatted section, but uses only two dashes in its "--" line. In
AsciiDoc this is an "open block", with no type; the lines end up jumbled
because they're formatted as paragraphs. We need four or more dashes to
make it a "listing block" that will respect the linebreaks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new version of fsmonitor-watchman hook has been introduced, to
avoid races.
* kw/fsmonitor-watchman-racefix:
fsmonitor: update documentation for hook version and watchman hooks
fsmonitor: add fsmonitor hook scripts for version 2
fsmonitor: handle version 2 of the hooks that will use opaque token
fsmonitor: change last update timestamp on the index_state to opaque token
|
|
The transport protocol version 2 becomes the default one.
* jn/promote-proto2-to-default:
fetch: default to protocol version 2
protocol test: let protocol.version override GIT_TEST_PROTOCOL_VERSION
test: request GIT_TEST_PROTOCOL_VERSION=0 when appropriate
config doc: protocol.version is not experimental
fetch test: use more robust test for filtered objects
|
|
The way "git pack-objects" reuses objects stored in existing pack
to generate its result has been improved.
* jk/packfile-reuse-cleanup:
pack-bitmap: don't rely on bitmap_git->reuse_objects
pack-objects: add checks for duplicate objects
pack-objects: improve partial packfile reuse
builtin/pack-objects: introduce obj_is_packed()
pack-objects: introduce pack.allowPackReuse
csum-file: introduce hashfile_total()
pack-bitmap: simplify bitmap_has_oid_in_uninteresting()
pack-bitmap: uninteresting oid can be outside bitmapped packfile
pack-bitmap: introduce bitmap_walk_contains()
ewah/bitmap: introduce bitmap_word_alloc()
packfile: expose get_delta_base()
builtin/pack-objects: report reused packfile objects
|
|
Two help messages given when "git add" notices the user gave it
nothing to add have been updated to use advise() API.
* hw/advice-add-nothing:
add: change advice config variables used by the add API
add: use advise function to display hints
|
|
Doc updates.
* bc/misconception-doc:
docs: mention when increasing http.postBuffer is valuable
doc: dissuade users from trying to ignore tracked files
|
|
Clarify documentation on committer/author identities.
* bc/author-committer-doc:
doc: provide guidance on user.name format
docs: expand on possible and recommended user config options
doc: move author and committer information to git-commit(1)
|
|
Doc grammo fix.
* bc/actualmente:
docs: use "currently" for the present time
|
|
Doc update.
* jk/push-default-doc:
doc: drop "explicitly given" from push.default description
|
|
rebase types
When 46af44b07d (pull --rebase=<type>: allow single-letter abbreviations
for the type, 2018-08-04) landed in Git, it had the side effect that
not only 'pull --rebase=<type>' accepted the single-letter abbreviations
but also the 'pull.rebase' and 'branch.<name>.rebase' configurations.
However, 'git remote rename' did not honor these single-letter
abbreviations when reading the 'branch.*.rebase' configurations.
We now document the single-letter abbreviations and both code places
share a common function to parse the values of 'git pull --rebase=*',
'pull.rebase', and 'branches.*.rebase'.
The only functional change is the handling of the `branch_info::rebase`
value. Before it was an unsigned enum, thus the truth value could be
checked with `branch_info::rebase != 0`. But `enum rebase_type` is
signed, thus the truth value must now be checked with
`branch_info::rebase >= REBASE_TRUE`
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
advice.addNothing config variable is used to control the visibility of
two advice messages in the add library. This config variable is
replaced by two new variables, whose names are more clear and relevant
to the two cases.
Also add the two new variables to the documentation.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jonathan Nieder
Johannes Schindelin
Don Goodman-Wilson
Laurent Arnoud
brian m. carlson
Derrick Stolee
Denton Liu
Emma Brooks
Damien Robert
Josh Steadmon
Thomas Gummerer
Jorge Lopez Silva
Jeff King
Elijah Newren
Bert Wesarg
Heba Waly