| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git format-patch" learns a configuration to set the default for
its --notes=<ref> option.
* dl/format-patch-notes-config:
format-patch: teach format.notes config option
git-format-patch.txt: document --no-notes option
|
|
For an environment variable that is supposed to be set by users, the
GIT_TR2* env vars are just too unclear, inconsistent, and ugly.
Most of the established GIT_* environment variables don't use
abbreviations, and in case of the few that do (GIT_DIR,
GIT_COMMON_DIR, GIT_DIFF_OPTS) it's quite obvious what the
abbreviations (DIR and OPTS) stand for. But what does TR stand for?
Track, traditional, trailer, transaction, transfer, transformation,
transition, translation, transplant, transport, traversal, tree,
trigger, truncate, trust, or ...?!
The trace2 facility, as the '2' suffix in its name suggests, is
supposed to eventually supercede Git's original trace facility. It's
reasonable to expect that the corresponding environment variables
follow suit, and after the original GIT_TRACE variables they are
called GIT_TRACE2; there is no such thing is 'GIT_TR'.
All trace2-specific config variables are, very sensibly, in the
'trace2' section, not in 'tr2'.
OTOH, we don't gain anything at all by omitting the last three
characters of "trace" from the names of these environment variables.
So let's rename all GIT_TR2* environment variables to GIT_TRACE2*,
before they make their way into a stable release.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git-format-patch, notes can be appended with the `--notes` option.
However, this must be specified by the user on an
invocation-by-invocation basis. If a user is not careful, it's possible
that they may forget to include it and generate a patch series without
notes.
Teach git-format-patch the `format.notes` config option. Its value is a
notes ref that will be automatically appended. The special value of
"standard" can be used to specify the standard notes. This option is
overridable with the `--no-notes` option in case a user wishes not to
append notes.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The stash.useBuiltin variable introduced in 90a462725e ("stash:
optionally use the scripted version again", 2019-02-25) was turned on by
default, but had no documentation.
Let's document it so that users who run into any stability issues with
the C rewrite know there's an escape hatch, and spell out that the
user should please report the bug when they have to turn off the
built-in stash.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The connectivity bitmaps are created by default in bare
repositories now; also the pathname hash-cache is created by
default to avoid making crappy deltas when repacking.
* ew/repack-with-bitmaps-by-default:
pack-objects: default to writing bitmap hash-cache
t5310: correctly remove bitmaps for jgit test
repack: enable bitmaps by default on bare repos
|
|
Polishing of the new trace2 facility continues. The system-level
configuration can specify site-wide trace2 settings, which can be
overridden with per-user configuration and environment variables.
* jh/trace2-sid-fix:
trace2: fixup access problem on /etc/gitconfig in read_very_early_config
trace2: update docs to describe system/global config settings
trace2: make SIDs more unique
trace2: clarify UTC datetime formatting
trace2: report peak memory usage of the process
trace2: use system/global config for default trace2 settings
config: add read_very_early_config()
trace2: find exec-dir before trace2 initialization
trace2: add absolute elapsed time to start event
trace2: refactor setting process starting time
config: initialize opts structure in repo_read_config()
|
|
"git tag" learned to give an advice suggesting it might be a
mistake when creating an annotated or signed tag that points at
another tag.
* dl/warn-tagging-a-tag:
tag: advise on nested tags
tag: fix formatting
|
|
"git merge-recursive" backend recently learned a new heuristics to
infer file movement based on how other files in the same directory
moved. As this is inherently less robust heuristics than the one
based on the content similarity of the file itself (rather than
based on what its neighbours are doing), it sometimes gives an
outcome unexpected by the end users. This has been toned down to
leave the renamed paths in higher/conflicted stages in the index so
that the user can examine and confirm the result.
* en/merge-directory-renames:
merge-recursive: switch directory rename detection default
merge-recursive: give callers of handle_content_merge() access to contents
merge-recursive: track information associated with directory renames
t6043: fix copied test description to match its purpose
merge-recursive: switch from (oid,mode) pairs to a diff_filespec
merge-recursive: cleanup handle_rename_* function signatures
merge-recursive: track branch where rename occurred in rename struct
merge-recursive: remove ren[12]_other fields from rename_conflict_info
merge-recursive: shrink rename_conflict_info
merge-recursive: move some struct declarations together
merge-recursive: use 'ci' for rename_conflict_info variable name
merge-recursive: rename locals 'o' and 'a' to 'obuf' and 'abuf'
merge-recursive: rename diff_filespec 'one' to 'o'
merge-recursive: rename merge_options argument from 'o' to 'opt'
Use 'unsigned short' for mode, like diff_filespec does
|
|
Update docs around "gc".
* ab/gc-docs:
gc docs: remove incorrect reference to gc.auto=0
gc docs: clarify that "gc" doesn't throw away referenced objects
gc docs: note "gc --aggressive" in "fast-import"
gc docs: downplay the usefulness of --aggressive
gc docs: note how --aggressive impacts --window & --depth
gc docs: fix formatting for "gc.writeCommitGraph"
gc docs: re-flow the "gc.*" section in "config"
gc docs: include the "gc.*" section from "config" in "gc"
gc docs: clean grammar for "gc.bigPackThreshold"
gc docs: stop noting "repack" flags
gc docs: modernize the advice for manually running "gc"
|
|
Clean-up markup in the documentation suite.
* cb/doco-mono:
doc: format pathnames and URLs as monospace.
doc/CodingGuidelines: URLs and paths as monospace
|
|
Retire scripted "git rebase" implementation.
* ab/drop-scripted-rebase:
rebase: remove the rebase.useBuiltin setting
|
|
Documentation mark-up fixes.
* ma/asciidoctor-fixes-more:
Documentation: turn middle-of-line tabs into spaces
git-svn.txt: drop escaping '\' that ends up being rendered
git.txt: remove empty line before list continuation
config/fsck.txt: avoid starting line with dash
config/diff.txt: drop spurious backtick
|
|
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Robert Dailey reported confusion on the mailing list about a nested
tag which was most likely created by mistake. Jeff King noted that
this isn't a very common case and creating a tag-to-a-tag can be a
user-error.
Suggest that it may be a mistake with an advice message when
creating such a tag. Those who do want to create a tag that point
at another tag regularly can turn it off with the usual advice
mechanism.
Reported-by: Robert Dailey <rcdailey.lists@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
[jc: fixed test style and tweaked the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 07e7dbf0db (gc: default aggressive depth to 50, 2016-08-11) we
somewhat confusingly use the same depth under --aggressive as we do by
default.
As noted in that commit that makes sense, it was wrong to make more
depth the default for "aggressive", and thus save disk space at the
expense of runtime performance, which is usually the opposite of
someone who'd like "aggressive gc" wants.
But that's left us with a mostly-redundant configuration variable, so
let's clearly note in its documentation that it doesn't change the
default.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the AsciiDoc formatting so that an example of "gc --auto" isn't
rendered as "git-gc(1) --auto", but as "git gc --auto". This is
consistent with the rest of the links and command examples in this
documentation.
The formatting I'm changing was initially introduced in
d5d5d7b641 ("gc: automatically write commit-graph files", 2018-06-27).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Re-flow the "gc.*" section in "config". A previous commit moved this
over from the "gc" docs, but tried to keep as many of the lines
identical to benefit from diff's move detection.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than duplicating the documentation for the various "gc" options
let's include the "gc" docs from git-config. They were mostly better
already, and now we don't have the same docs in two places with subtly
different wording.
In the cases where the git-gc(1) docs were saying something the "gc"
docs in git-config(1) didn't cover move the relevant section over to
the git-config(1) docs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When all of x/a, x/b, and x/c have moved to z/a, z/b, and z/c on one
branch, there is a question about whether x/d added on a different
branch should remain at x/d or appear at z/d when the two branches are
merged. There are different possible viewpoints here:
A) The file was placed at x/d; it's unrelated to the other files in
x/ so it doesn't matter that all the files from x/ moved to z/ on
one branch; x/d should still remain at x/d.
B) x/d is related to the other files in x/, and x/ was renamed to z/;
therefore x/d should be moved to z/d.
Since there was no ability to detect directory renames prior to
git-2.18, users experienced (A) regardless of context. Choice (B) was
implemented in git-2.18, with no option to go back to (A), and has been
in use since. However, one user reported that the merge results did not
match their expectations, making the change of default problematic,
especially since there was no notice printed when directory rename
detection moved files.
Note that there is also a third possibility here:
C) There are different answers depending on the context and content
that cannot be determined by git, so this is a conflict. Use a
higher stage in the index to record the conflict and notify the
user of the potential issue instead of silently selecting a
resolution for them.
Add an option for users to specify their preference for whether to use
directory rename detection, and default to (C). Even when directory
rename detection is on, add notice messages about files moved into new
directories.
As a sidenote, x/d did not have to be a new file here; it could have
already existed at some other path and been renamed to x/d, with
directory rename detection just renaming it again to z/d. Thus, it's
not just new files, but also a modification to all rename types (normal
renames, rename/add, rename/delete, rename/rename(1to1),
rename/rename(1to2), and rename/rename(2to1)).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
Carrying the legacy version is a maintenance burden as seen in
7e097e27d3 ("legacy-rebase: backport -C<n> and --whitespace=<option>
checks", 2018-11-20) and 9aea5e9286 ("rebase: fix regression in
rebase.useBuiltin=false test mode", 2019-02-13). Since the built-in
version has been shown to be stable enough let's remove the legacy
version.
As noted in [3] having use_builtin_rebase() shell out to get its
config doesn't make any sense anymore, that was done for the purposes
of spawning the legacy rebase without having modified any global
state. Let's instead handle this case in rebase_config().
There's still a bunch of references to git-legacy-rebase in po/*.po,
but those will be dealt with in time by the i18n effort.
Even though this configuration variable only existed two releases
let's not entirely delete the entry from the docs, but note its
absence. Individual versions of git tend to be around for a while due
to distro packaging timelines, so e.g. if we're "lucky" a given
version like 2.21 might be installed on say OSX for half a decade.
That'll mean some people probably setting this in config, and then
when they later wonder if it's needed they can Google search the
config option name or check it in git-config. It also allows us to
refer to the docs from the warning for details.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
3. https://public-inbox.org/git/nycvar.QRO.7.76.6.1903141544110.41@tvgsbejvaqbjf.bet/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enabling pack.writebitmaphashcache should always be a performance win.
It costs only 4 bytes per object on disk, and the timings in ae4f07fbcc
(pack-bitmap: implement optional name_hash cache, 2013-12-21) show it
improving fetch and partial-bitmap clone times by 40-50%.
The only reason we didn't enable it by default at the time is that early
versions of JGit's bitmap reader complained about the presence of
optional header bits it didn't understand. But that was changed in
JGit's d2fa3987a (Use bitcheck to check for presence of OPT_FULL option,
2013-10-30), which made it into JGit v3.5.0 in late 2014.
So let's turn this option on by default. It's backwards-compatible with
all versions of Git, and if you are also using JGit on the same
repository, you'd only run into problems using a version that's almost 5
years old.
We'll drop the manual setting from all of our test scripts, including
perf tests. This isn't strictly necessary, but it has two advantages:
1. If the hash-cache ever stops being enabled by default, our perf
regression tests will notice.
2. We can use the modified perf tests to show off the behavior of an
otherwise unconfigured repo, as shown below.
These are the results of a few of a perf tests against linux.git that
showed interesting results. You can see the expected speedup in 5310.4,
which was noted in ae4f07fbcc. Curiously, 5310.8 did not improve (and
actually got slower), despite seeing the opposite in ae4f07fbcc.
I don't have an explanation for that.
The tests from p5311 did not exist back then, but do show improvements
(a smaller pack due to better deltas, which we found in less time).
Test HEAD^ HEAD
-------------------------------------------------------------------------------------
5310.4: simulated fetch 7.39(22.70+0.25) 5.64(11.43+0.22) -23.7%
5310.8: clone (partial bitmap) 18.45(24.83+1.19) 19.94(28.40+1.36) +8.1%
5311.31: server (128 days) 0.41(1.13+0.05) 0.34(0.72+0.02) -17.1%
5311.32: size (128 days) 7.4M 7.0M -4.8%
5311.33: client (128 days) 1.33(1.49+0.06) 1.29(1.37+0.12) -3.0%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A typical use case for bare repos is for serving clones and
fetches to clients. Enable bitmaps by default on bare repos to
make it easier for admins to host git repos in a performant way.
Signed-off-by: Eric Wong <e@80x24.org>
Helped-by: Jeff King <peff@peff.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Applying CodingGuidelines about monospace on pathnames and URLs.
See Documentation/CodingGuidelines.txt for more information.
Signed-off-by: Corentin BOMPARD <corentin.bompard@etu.univ-lyon1.fr>
Signed-off-by: Nathan BERBEZIER <nathan.berbezier@etu.univ-lyon1.fr>
Signed-off-by: Pablo CHABANNE <pablo.chabanne@etu.univ-lyon1.fr>
Signed-off-by: Matthieu MOY <matthieu.moy@univ-lyon1.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have something much better now: --rebase-merges (which is a
complete re-design --preserve-merges, with a lot of issues fixed such as
the inability to reorder commits with --preserve-merges).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
|
|
These tabs happen to appear in columns where they don't stand out too
much, so the diff here is non-obvious. Some of these are rendered
differently by AsciiDoc and Asciidoctor (although the difference might
be invisible!), which is how I found a few of them. The remainder were
found using `git grep "[a-zA-Z.,)]$TAB[a-zA-Z]"`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This dash at the start of the line causes Asciidoctor to trip on the
list continuations that follow and to render the pluses literally.
Rewrap a little to put the dash elsewhere.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pack-objects" learned another algorithm to compute the set of
objects to send, that trades the resulting packfile off to save
traversal cost to favor small pushes.
* ds/push-sparse-tree-walk:
pack-objects: create GIT_TEST_PACK_SPARSE
pack-objects: create pack.useSparse setting
revision: implement sparse algorithm
list-objects: consume sparse tree walk
revision: add mark_tree_uninteresting_sparse
|
|
Documentation around core.crlf has been updated.
* jk/autocrlf-overrides-eol-doc:
docs/config: clarify "text property" in core.eol
doc/gitattributes: clarify "autocrlf overrides eol"
|
|
The author.email, author.name, committer.email and committer.name
settings are analogous to the GIT_AUTHOR_* and GIT_COMMITTER_*
environment variables, but for the git config system. This allows them
to be set separately for each repository.
Git supports setting different authorship and committer
information with environment variables. However, environment variables
are set in the shell, so if different authorship and committer
information is needed for different repositories an external tool is
required.
This adds support to git config for author.email, author.name,
committer.email and committer.name settings so this information
can be set per repository.
Also, it generalizes the fmt_ident function so it can handle author vs
committer identification.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" learned to re-execute a command given with 'exec'
to run after it failed the last time.
* js/rebase-i-redo-exec:
rebase: introduce a shortcut for --reschedule-failed-exec
rebase: add a config option to default to --reschedule-failed-exec
rebase: introduce --reschedule-failed-exec
|
|
The word "property" is vague here. Let's spell out that we mean the path
must be marked with the text attribute.
While we're here, let's make the paragraph a little easier to read by
de-emphasizing the "when core.autocrlf is false" bit. Putting it in the
first sentence obscures the main content, and many readers won't care
about autocrlf (i.e., anyone who is just following the gitattributes(7)
advice, which mainly discusses "text" and "core.eol").
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc clarification.
* es/doc-worktree-guessremote-config:
doc/config: do a better job of introducing 'worktree.guessRemote'
|
|
The '--sparse' flag in 'git pack-objects' changes the algorithm
used to enumerate objects to one that is faster for individual
users pushing new objects that change only a small cone of the
working directory. The sparse algorithm is not recommended for a
server, which likely sends new objects that appear across the
entire working directory.
Create a 'pack.useSparse' setting that enables this new algorithm.
This allows 'git push' to use this algorithm without passing a
'--sparse' flag all the way through four levels of run_command()
calls.
If the '--no-sparse' flag is set, then this config setting is
overridden.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push $there $src:$dst" rejects when $dst is not a fully
qualified refname and not clear what the end user meant. The
codepath has been taught to give a clearer error message, and also
guess where the push should go by taking the type of the pushed
object into account (e.g. a tag object would want to go under
refs/tags/).
* ab/push-dwim-dst:
push doc: document the DWYM behavior pushing to unqualified <dst>
push: test that <src> doesn't DWYM if <dst> is unqualified
push: add an advice on unqualified <dst> push
push: move unqualified refname error into a function
push: improve the error shown on unqualified <dst> push
i18n: remote.c: mark error(...) messages for translation
remote.c: add braces in anticipation of a follow-up change
|
|
The "http.version" configuration variable can be used with recent
enough cURL library to force the version of HTTP used to talk when
fetching and pushing.
* fc/http-version:
http: add support selecting http version
|
|
The documentation for this option jumps right in with "With `add`",
without explaining that `add` is a sub-command of "git worktree".
Together with rather odd grammatical structure of the remainder of the
sentence, the description can be difficult for newcomers to understand.
Clarify by improving the grammar and mentioning "git worktree add"
explicitly.
Reported-by: Олег Самойлов <splarv@ya.ru>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It would be cumbersome to type out that option all the time, so let's
offer the convenience of a config setting: rebase.rescheduleFailedExec.
Besides, this opens the door to changing the default in a future version
of Git: it does make some sense to reschedule failed `exec` commands by
default (and if we could go back in time when the `exec` command was
invented, we probably would change that default right from the start).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a user explicitly sets
[index]
threads = true
to read the index using multiple threads, ensure that index writes
include the offset table by default to make that possible. This
ensures that the user's intent of turning on threading is respected.
In other words, permit the following configurations:
- index.threads and index.recordOffsetTable unspecified: do not write
the offset table yet (to avoid alarming the user with "ignoring IEOT
extension" messages when an older version of Git accesses the
repository) but do make use of multiple threads to read the index if
the supporting offset table is present.
This can also be requested explicitly by setting index.threads=true,
0, or >1 and index.recordOffsetTable=false.
- index.threads=false or 1: do not write the offset table, and do not
make use of the offset table.
One can set index.recordOffsetTable=false as well, to be more
explicit.
- index.threads=true, 0, or >1 and index.recordOffsetTable unspecified:
write the offset table and make use of threads at read time.
This can also be requested by setting index.threads=true, 0, >1, or
unspecified and index.recordOffsetTable=true.
Fortunately the complication is temporary: once most Git installations
have upgraded to a version with support for the IEOT and EOIE
extensions, we can flip the defaults for index.recordEndOfIndexEntries
and index.recordOffsetTable to true and eliminate the settings.
Helped-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As with EOIE, popular versions of Git do not support the new IEOT
extension yet. When accessing a Git repository written by a more
modern version of Git, they correctly ignore the unrecognized section,
but in the process they loudly warn
ignoring IEOT extension
resulting in confusion for users. Introduce the index extension more
gently by not writing it yet in this first version with support for
it. Soon, once sufficiently many users are running a modern version
of Git, we can flip the default so users benefit from this index
extension by default.
Introduce a '[index] recordOffsetTable' configuration variable to
control whether the new index extension is written.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 3b1d9e04 (eoie: add End of Index Entry (EOIE) extension,
2018-10-10) Git defaults to writing the new EOIE section when writing
out an index file. Usually that is a good thing because it improves
threaded performance, but when a Git repository is shared with older
versions of Git, it produces a confusing warning:
$ git status
ignoring EOIE extension
HEAD detached at 371ed0defa
nothing to commit, working tree clean
Let's introduce the new index extension more gently. First we'll roll
out the new version of Git that understands it, and then once
sufficiently many users are using such a version, we can flip the
default to writing it by default.
Introduce a '[index] recordEndOfIndexEntries' configuration variable
to allow interested users to benefit from this index extension early.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rebase.useBuiltin variable introduced in 55071ea248 ("rebase:
start implementing it as a builtin", 2018-08-07) was turned on by
default in 5541bd5b8f ("rebase: default to using the builtin rebase",
2018-08-08), but had no documentation.
Let's document it so that users who run into any stability issues with
the C rewrite know there's an escape hatch[1], and make it clear that
needing to turn off builtin rebase means you've found a bug in git.
1. https://public-inbox.org/git/87y39w1wc2.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an advice to the recently improved error message added in
f8aae12034 ("push: allow unqualified dest refspecs to DWIM",
2008-04-23).
Now with advice.pushUnqualifiedRefName=true (on by default) we show a
hint about how to proceed:
$ ./git-push avar v2.19.0^{commit}:newbranch -n
error: The destination you provided is not a full refname (i.e.,
starting with "refs/"). We tried to guess what you meant by:
- Looking for a ref that matches 'newbranch' on the remote side.
- Checking if the <src> being pushed ('v2.19.0^{commit}')
is a ref in "refs/{heads,tags}/". If so we add a corresponding
refs/{heads,tags}/ prefix on the remote side.
Neither worked, so we gave up. You must fully qualify the ref.
hint: The <src> part of the refspec is a commit object.
hint: Did you mean to create a new branch by pushing to
hint: 'v2.19.0^{commit}:refs/heads/newbranch'?
error: failed to push some refs to 'git@github.com:avar/git.git'
When trying to push a tag, tree or a blob we suggest that perhaps the
user meant to push them to refs/tags/ instead.
The if/else duplication for all of OBJ_{COMMIT,TAG,TREE,BLOB} is
unfortunate, but is required to correctly mark the messages for
translation. See the discussion in
<87r2gxebsi.fsf@evledraar.gmail.com> about that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Windows fix.
* js/mingw-perl5lib:
mingw: unset PERL5LIB by default
config: move Windows-specific config settings into compat/mingw.c
config: allow for platform-specific core.* config settings
config: rename `dummy` parameter to `cb` in git_default_config()
|
|
Split the overly large Documentation/config.txt file into million
little pieces. This potentially allows each individual piece
included into the manual page of the command it affects more easily.
* nd/config-split: (81 commits)
config.txt: remove config/dummy.txt
config.txt: move worktree.* to a separate file
config.txt: move web.* to a separate file
config.txt: move versionsort.* to a separate file
config.txt: move user.* to a separate file
config.txt: move url.* to a separate file
config.txt: move uploadpack.* to a separate file
config.txt: move uploadarchive.* to a separate file
config.txt: move transfer.* to a separate file
config.txt: move tag.* to a separate file
config.txt: move submodule.* to a separate file
config.txt: move stash.* to a separate file
config.txt: move status.* to a separate file
config.txt: move splitIndex.* to a separate file
config.txt: move showBranch.* to a separate file
config.txt: move sequencer.* to a separate file
config.txt: move sendemail-config.txt to config/
config.txt: move reset.* to a separate file
config.txt: move rerere.* to a separate file
config.txt: move repack.* to a separate file
...
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This file was only needed when config directory was empty. Now that
the directory is fully populated, it can be deleted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
SZEDER Gábor
Denton Liu
Johannes Schindelin
Jeff Hostetler
Ævar Arnfjörð Bjarmason
Elijah Newren
Jeff King
Eric Wong
Corentin BOMPARD
Martin Ågren
William Hubbs
Derrick Stolee
Eric Sunshine
Jonathan Nieder
Nguyễn Thái Ngọc Duy