| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git format-patch" learns to take "whenAble" as a possible value
for the format.useAutoBase configuration variable to become no-op
when the automatically computed base does not make sense.
* jk/format-auto-base-when-able:
format-patch: teach format.useAutoBase "whenAble" option
|
|
Docfix.
* jc/fmt-merge-msg-suppress-destination:
config/fmt-merge-msg.txt: drop space in quote
|
|
Hotfix.
* tb/upload-pack-filters:
config/uploadpack.txt: fix typo in `--filter=tree:<n>`
|
|
The format.useAutoBase configuration option exists to allow users to
enable '--base=auto' for format-patch by default.
This can sometimes lead to poor workflow, due to unexpected failures
when attempting to format an ancient patch:
$ git format-patch -1 <an old commit>
fatal: base commit shouldn't be in revision list
This can be very confusing, as it is not necessarily immediately obvious
that the user requested a --base (since this was in the configuration,
not on the command line).
We do want --base=auto to fail when it cannot provide a suitable base,
as it would be equally confusing if a formatted patch did not include
the base information when it was requested.
Teach format.useAutoBase a new mode, "whenAble". This mode will cause
format-patch to attempt to include a base commit when it can. However,
if no valid base commit can be found, then format-patch will continue
formatting the patch without a base commit.
In order to avoid making yet another branch name unusable with --base,
do not teach --base=whenAble or --base=whenable.
Instead, refactor the base_commit option to use a callback, and rely on
the global configuration variable auto_base.
This does mean that a user cannot request this optional base commit
generation from the command line. However, this is likely not too
valuable. If the user requests base information manually, they will be
immediately informed of the failure to acquire a suitable base commit.
This allows the user to make an informed choice about whether to
continue the format.
Add tests to cover the new mode of operation for --base.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The transport protocol v2 has become the default again.
* jk/make-protocol-v2-the-default:
protocol: re-enable v2 protocol by default
|
|
"git commit-graph write" learned to limit the number of bloom
filters that are computed from scratch with the --max-new-filters
option.
* tb/bloom-improvements:
commit-graph: introduce 'commitGraph.maxNewFilters'
builtin/commit-graph.c: introduce '--max-new-filters=<n>'
commit-graph: rename 'split_commit_graph_opts'
bloom: encode out-of-bounds filters as non-empty
bloom/diff: properly short-circuit on max_changes
bloom: use provided 'struct bloom_filter_settings'
bloom: split 'get_bloom_filter()' in two
commit-graph.c: store maximum changed paths
commit-graph: respect 'commitGraph.readChangedPaths'
t/helper/test-read-graph.c: prepare repo settings
commit-graph: pass a 'struct repository *' in more places
t4216: use an '&&'-chain
commit-graph: introduce 'get_bloom_filter_settings()'
|
|
That should be a ":", not a second "=". While at it, refer to the
placeholder "<n>" as "<n>", not "n" (see, e.g., the entry just before
this one).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We document how `merge.suppressDest` can be used to omit " into <branch
name>" from the title of the merge message. It is true that we omit the
space character before "into", but that lone double quote character
risks ending up on the wrong side of a line break, looking a bit out of
place. This currently happens with, e.g., 80-character terminals.
Drop that leading quoted space. The result should be just as clear about
how this option affects the formatted message.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git receive-pack" that accepts requests by "git push" learned to
outsource most of the ref updates to the new "proc-receive" hook.
* jx/proc-receive-hook:
doc: add documentation for the proc-receive hook
transport: parse report options for tracking refs
t5411: test updates of remote-tracking branches
receive-pack: new config receive.procReceiveRefs
doc: add document for capability report-status-v2
New capability "report-status-v2" for git-push
receive-pack: feed report options to post-receive
receive-pack: add new proc-receive hook
t5411: add basic test cases for proc-receive hook
transport: not report a non-head push as a branch
|
|
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
|
|
Protocol v2 became the default in v2.26.0 via 684ceae32d (fetch: default
to protocol version 2, 2019-12-23). More widespread use turned up a
regression in negotiation. That was fixed in v2.27.0 via 4fa3f00abb
(fetch-pack: in protocol v2, in_vain only after ACK, 2020-04-27), but we
also reverted the default to v0 as a precuation in 11c7f2a30b (Revert
"fetch: default to protocol version 2", 2020-04-22).
In v2.28.0, we re-enabled it for experimental users with 3697caf4b9
(config: let feature.experimental imply protocol.version=2, 2020-05-20)
and haven't heard any complaints. v2.28 has only been out for 2 months,
but I'd generally expect people turning on feature.experimental to also
stay pretty up-to-date. So we're not likely to collect much more data by
waiting. In addition, we have no further reports from people running
v2.26.0, and of course some people have been setting protocol.version
manually for ages.
Let's move forward with v2 as the default again. It's possible there are
still lurking bugs, but we won't know until it gets more widespread use.
And we can find and squash them just like any other bug at this point.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'meld' backend of the "git mergetool" learned to give the
underlying 'meld' the '--auto-merge' option, which would help
reduce the amount of text that requires manual merging.
* ls/mergetool-meld-auto-merge:
mergetool: allow auto-merge for meld to follow the vim-diff behavior
|
|
"git index-pack" learned to resolve deltified objects with greater
parallelism.
* jt/threaded-index-pack:
index-pack: make quantum of work smaller
index-pack: make resolve_delta() assume base data
index-pack: calculate {ref,ofs}_{first,last} early
index-pack: remove redundant child field
index-pack: unify threaded and unthreaded code
index-pack: remove redundant parameter
Documentation: deltaBaseCacheLimit is per-thread
|
|
Introduce a configuration variable to specify a default value for the
recently-introduce '--max-new-filters' option of 'git commit-graph
write'.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of writing a new commit-graph in every 'git maintenance run
--auto' process (when maintenance.commit-graph.enalbed is configured to
be true), only write when there are "enough" commits not in a
commit-graph file.
This count is controlled by the maintenance.commit-graph.auto config
option.
To compute the count, use a depth-first search starting at each ref, and
leaving markers using the SEEN flag. If this count reaches the limit,
then terminate early and start the task. Otherwise, this operation will
peel every ref and parse the commit it points to. If these are all in
the commit-graph, then this is typically a very fast operation. Users
with many refs might feel a slow-down, and hence could consider updating
their limit to be very small. A negative value will force the step to
run every time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, a normal run of "git maintenance run" will only run the 'gc'
task, as it is the only one enabled. This is mostly for backwards-
compatible reasons since "git maintenance run --auto" commands replaced
previous "git gc --auto" commands after some Git processes. Users could
manually run specific maintenance tasks by calling "git maintenance run
--task=<task>" directly.
Allow users to customize which steps are run automatically using config.
The 'maintenance.<task>.enabled' option then can turn on these other
tasks (or turn off the 'gc' task).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the mergetool used with "meld" backend behave similarly to "vimdiff" by
telling it to auto-merge non-conflicting parts and highlight the conflicting
parts when `mergetool.meld.useAutoMerge` is configured with `true`, or `auto`
for detecting the `--auto-merge` option automatically.
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Helped-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Lin Sun <lin.sun@zoom.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git uses the 'core.commitGraph' configuration value to control whether
or not the commit graph is used when parsing commits or performing a
traversal.
Now that commit-graphs can also contain a section for changed-path Bloom
filters, administrators that already have commit-graphs may find it
convenient to use those graphs without relying on their changed-path
Bloom filters. This can happen, for example, during a staged roll-out,
or in the event of an incident.
Introduce 'commitGraph.readChangedPaths' to control whether or not Bloom
filters are read. Note that this configuration is independent from both:
- 'core.commitGraph', to allow flexibility in using all parts of a
commit-graph _except_ for its Bloom filters.
- The '--changed-paths' option for 'git commit-graph write', to allow
reading and writing Bloom filters to be controlled independently.
When the variable is set, pretend as if no Bloom data was specified at
all. This avoids adding additional special-casing outside of the
commit-graph internals.
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new multi-valued config variable "receive.procReceiveRefs"
for `receive-pack` command, like the follows:
git config --system --add receive.procReceiveRefs refs/for
git config --system --add receive.procReceiveRefs refs/drafts
If the specific prefix strings given by the config variables match the
reference names of the commands which are sent from git client to
`receive-pack`, these commands will be executed by an external hook
(named "proc-receive"), instead of the internal `execute_commands`
function.
For example, if it is set to "refs/for", pushing to a reference such as
"refs/for/master" will not create or update reference "refs/for/master",
but may create or update a pull request directly by running the hook
"proc-receive".
Optional modifiers can be provided in the beginning of the value to
filter commands for specific actions: create (a), modify (m),
delete (d). A `!` can be included in the modifiers to negate the
reference prefix entry. E.g.:
git config --system --add receive.procReceiveRefs ad:refs/heads
git config --system --add receive.procReceiveRefs !:refs/heads
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clarify that core.deltaBaseCacheLimit is per-thread, as can be seen from
the fact that cache usage (base_cache_used in struct thread_local in
builtin/index-pack.c) is tracked individually for each thread and
compared against delta_base_cache_limit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a noop fetch negotiator. This is introduced to allow partial clones
to skip the unneeded negotiation step when fetching missing objects
using a "git fetch" subprocess. (The implementation of spawning a "git
fetch" subprocess will be done in a subsequent patch.) But this can also
be useful for end users, e.g. as a blunt fix for object corruption.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop when "sendmail.*" configuration variables are defined, which
could be a mistaken attempt to define "sendemail.*" variables.
* dd/send-email-config:
git-send-email: die if sendmail.* config is set
|
|
The component to respond to "git fetch" request is made more
configurable to selectively allow or reject object filtering
specification used for partial cloning.
* tb/upload-pack-filters:
t5616: use test_i18ngrep for upload-pack errors
upload-pack.c: introduce 'uploadpackfilter.tree.maxDepth'
upload-pack.c: allow banning certain object filter(s)
list_objects_filter_options: introduce 'list_object_filter_config_name'
|
|
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
|
|
In b79cf959b2 (upload-pack.c: allow banning certain object filter(s),
2020-02-26), we introduced functionality to disallow certain object
filters from being chosen from within 'git upload-pack'. Traditionally,
administrators use this functionality to disallow filters that are known
to perform slowly, for e.g., those that do not have bitmap-level
filtering.
In the past, the '--filter=tree:<n>' was one such filter that does not
have bitmap-level filtering support, and so was likely to be banned by
administrators.
However, in the previous couple of commits, we introduced bitmap-level
filtering for the case when 'n' is equal to '0', i.e., as if we had a
'--filter=tree:none' choice.
While it would be sufficient to simply write
$ git config uploadpackfilter.tree.allow true
(since it would allow all values of 'n'), we would like to be able to
allow this filter for certain values of 'n', i.e., those no greater than
some pre-specified maximum.
In order to do this, introduce a new configuration key, as follows:
$ git config uploadpackfilter.tree.maxDepth <m>
where '<m>' specifies the maximum allowed value of 'n' in the filter
'tree:n'. Administrators who wish to allow for only the value '0' can
write:
$ git config uploadpackfilter.tree.allow true
$ git config uploadpackfilter.tree.maxDepth 0
which allows '--filter=tree:0', but no other values.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git clients may ask the server for a partial set of objects, where the
set of objects being requested is refined by one or more object filters.
Server administrators can configure 'git upload-pack' to allow or ban
these filters by setting the 'uploadpack.allowFilter' variable to
'true' or 'false', respectively.
However, administrators using bitmaps may wish to allow certain kinds of
object filters, but ban others. Specifically, they may wish to allow
object filters that can be optimized by the use of bitmaps, while
rejecting other object filters which aren't and represent a perceived
performance degradation (as well as an increased load factor on the
server).
Allow configuring 'git upload-pack' to support object filters on a
case-by-case basis by introducing two new configuration variables:
- 'uploadpackfilter.allow'
- 'uploadpackfilter.<kind>.allow'
where '<kind>' may be one of 'blobNone', 'blobLimit', 'tree', and so on.
Setting the second configuration variable for any valid value of
'<kind>' explicitly allows or disallows restricting that kind of object
filter.
If a client requests the object filter <kind> and the respective
configuration value is not set, 'git upload-pack' will default to the
value of 'uploadpackfilter.allow', which itself defaults to 'true' to
maintain backwards compatibility. Note that this differs from
'uploadpack.allowfilter', which controls whether or not the 'filter'
capability is advertised.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge" learned to selectively omit " into <branch>" at the end
of the title of default merge message with merge.suppressDest
configuration.
* jc/fmt-merge-msg-suppress-destination:
fmt-merge-msg: allow merge destination to be omitted again
Revert "fmt-merge-msg: stop treating `master` specially"
|
|
In Git 2.28, we stopped special casing 'master' when producing the
default merge message by just removing the code to squelch "into
'master'" at the end of the message.
Introduce multi-valued merge.suppressDest configuration variable
that gives a set of globs to match against the name of the branch
into which the merge is being made, to let users specify for which
branch fmt-merge-msg's output should be shortened. When it is not
set, 'master' is used as the sole value of the variable by default.
The above move mostly reverts the pre-2.28 default in repositories
that have no relevant configuration.
Add a few tests to protect the behaviour with the new configuration
variable from future regression.
Helped-by: Linus Torvalds <torvalds@linux-foundation.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document the extensions.objectFormat config setting. Warn users not to
modify it themselves.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I've seen several people mis-configure git send-email on their first
attempt because they set the sendmail.* config options - not
sendemail.*. This patch detects this mistake and bails out with a
friendly warning.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fetch.writeCommitGraph feature makes fetches write out a commit
graph file for the newly downloaded pack on fetch. This improves the
performance of various commands that would perform a revision walk and
eventually ought to be the default for everyone. To prepare for that
future, it's enabled by default for users that set
feature.experimental=true to experience such future defaults.
Alas, for --unshallow fetches from a shallow clone it runs into a
snag: by the time Git has fetched the new objects and is writing a
commit graph, it has performed a revision walk and r->parsed_objects
contains information about the shallow boundary from *before* the
fetch. The commit graph writing code is careful to avoid writing a
commit graph file in shallow repositories, but the new state is not
shallow, and the result is that from that point on, commands like "git
log" make use of a newly written commit graph file representing a
fictional history with the old shallow boundary.
We could fix this by making the commit graph writing code more careful
to avoid writing a commit graph that could have used any grafts or
shallow state, but it is possible that there are other pieces of
mutated state that fetch's commit graph writing code may be relying
on. So disable it in the feature.experimental configuration.
Google developers have been running in this configuration (by setting
fetch.writeCommitGraph=false in the system config) to work around this
bug since it was discovered in April. Once the fix lands, we'll
enable fetch.writeCommitGraph=true again to give it some early testing
before rolling out to a wider audience.
In other words:
- this patch only affects behavior with feature.experimental=true
- it makes feature.experimental match the configuration Google has
been using for the last few months, meaning it would leave users in
a better tested state than without it
- this should improve testing for other features guarded by
feature.experimental, by making feature.experimental safer to use
Reported-by: Jay Conrod <jayconrod@google.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cloning a repository without any branches, Git chooses a default
branch name for the as-yet unborn branch.
As part of the implicit initialization of the local repository, Git just
learned to respect `init.defaultBranch` to choose a different initial
branch name. We now really want that branch name to be used as a
fall-back.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We just introduced the command-line option
`--initial-branch=<branch-name>` to allow initializing a new repository
with a different initial branch than the hard-coded one.
To allow users to override the initial branch name more permanently
(i.e. without having to specify the name manually for each and every
`git init` invocation), let's introduce the `init.defaultBranch` config
setting.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Don Goodman-Wilson <don@goodman-wilson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commands in the "diff" family learned to honor "diff.relative"
configuration variable.
* la/diff-relative-config:
diff: add config option relative
|
|
The `diff.relative` boolean option set to `true` shows only changes in
the current directory/value specified by the `path` argument of the
`relative` option and shows pathnames relative to the aforementioned
directory.
Teach `--no-relative` to override earlier `--relative`
Add for git-format-patch(1) options documentation `--relative` and
`--no-relative`
Signed-off-by: Laurent Arnoud <laurent@spkdev.net>
Acked-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git 2.26 used protocol v2 as its default protocol, but soon after
release, users noticed that the protocol v2 negotiation code was prone
to fail when fetching from some remotes that are far ahead of others
(such as linux-next.git versus Linus's linux.git). That has been
fixed by 0b07eecf6ed (Merge branch 'jt/v2-fetch-nego-fix',
2020-05-01), but to be cautious, we are using protocol v0 as the
default in 2.27 to buy some time for any other unanticipated issues to
surface.
To that end, let's ensure that users requesting the bleeding edge
using the feature.experimental flag *do* get protocol v2. This way,
we can gain experience with a wider audience for the new protocol
version and be more confident when it is time to enable it by default
for all users in some future Git version.
Implementation note: this isn't with the rest of the
feature.experimental options in repo-settings.c because those are tied
to a repository object, whereas this code path is used for operations
like "git ls-remote" that do not require a repository.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* bc/doc-credential-helper-value:
docs: document credential.helper allowed values
|
|
gitcredentials(7) already mentions several possible invocations that one
can use as the value for credential.helper. However, many people are
not aware that there are other options than a simple credential helper
name, so let's place some explanatory text in the documentation for
credential.helper as well.
We still refer the user to gitcredential(7) for additional explanations
and helpful examples.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge" learns the "--autostash" option.
* dl/merge-autostash: (22 commits)
pull: pass --autostash to merge
t5520: make test_pull_autostash() accept expect_parent_num
merge: teach --autostash option
sequencer: implement apply_autostash_oid()
sequencer: implement save_autostash()
sequencer: unlink autostash in apply_autostash()
sequencer: extract perform_autostash() from rebase
rebase: generify create_autostash()
rebase: extract create_autostash()
reset: extract reset_head() from rebase
rebase: generify reset_head()
rebase: use apply_autostash() from sequencer.c
sequencer: rename stash_sha1 to stash_oid
sequencer: make apply_autostash() accept a path
rebase: use read_oneliner()
sequencer: make read_oneliner() extern
sequencer: configurably warn on non-existent files
sequencer: make read_oneliner() accept flags
sequencer: make file exists check more efficient
sequencer: stop leaking buf
...
|
|
Those fetching over protocol v2 from linux-next and other kernel
repositories are reporting that v2 often fetches way too much than
needed.
* jn/demote-proto2-from-default:
Revert "fetch: default to protocol version 2"
|
|
The "--decorate-refs" and "--decorate-refs-exclude" options "git
log" takes have learned a companion configuration variable
log.excludeDecoration that sits at the lowest priority in the
family.
* ds/log-exclude-decoration-config:
log: add log.excludeDecoration config option
log-tree: make ref_filter_match() a helper method
|
|
Documentation updates around the "--recurse-submodules" option.
* dr/doc-recurse-submodules:
doc: --recurse-submodules mostly applies to active submodules
doc: be more precise on (fetch|push).recurseSubmodules
doc: explain how to deactivate submodule.recurse completely
doc: document --recurse-submodules for reset and restore
doc: list all commands affected by submodule.recurse
|
|
The output from "git format-patch" uses RFC 2047 encoding for
non-ASCII letters on From: and Subject: headers, so that it can
directly be fed to e-mail programs. A new option has been added
to produce these headers in raw.
* eb/format-patch-no-encode-headers:
format-patch: teach --no-encode-email-headers
|
|
Trace2 enhancement to allow logging of the environment variables.
* js/trace2-env-vars:
trace2: teach Git to log environment variables
|
|
This reverts commit 684ceae32dae726c6a5c693b257b156926aba8b7.
Users fetching from linux-next and other kernel remotes are reporting
that the limited ref advertisement causes negotiation to reach
MAX_IN_VAIN, resulting in too-large fetches.
Reported-by: Lubomir Rintel <lkundrak@v3.sk>
Reported-by: "Dixit, Ashutosh" <ashutosh.dixit@intel.com>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 'git log', the --decorate-refs-exclude option appends a pattern
to a string_list. This list is used to prevent showing some refs
in the decoration output, or even by --simplify-by-decoration.
Users may want to use their refs space to store utility refs that
should not appear in the decoration output. For example, Scalar [1]
runs a background fetch but places the "new" refs inside the
refs/scalar/hidden/<remote>/* refspace instead of refs/<remote>/*
to avoid updating remote refs when the user is not looking. However,
these "hidden" refs appear during regular 'git log' queries.
A similar idea to use "hidden" refs is under consideration for core
Git [2].
Add the 'log.excludeDecoration' config option so users can exclude
some refs from decorations by default instead of needing to use
--decorate-refs-exclude manually. The config value is multi-valued
much like the command-line option. The documentation is careful to
point out that the config value can be overridden by the
--decorate-refs option, even though --decorate-refs-exclude would
always "win" over --decorate-refs.
Since the 'log.excludeDecoration' takes lower precedence to
--decorate-refs, and --decorate-refs-exclude takes higher
precedence, the struct decoration_filter needed another field.
This led also to new logic in load_ref_decorations() and
ref_filter_match().
There are several tests in t4202-log.sh that test the
--decorate-refs-(include|exclude) options, so these are extended.
Since the expected output is already stored as a file, most tests
could simply replace a "--decorate-refs-exclude" option with an
in-line config setting. Other tests involve the precedence of
the config option compared to command-line options and needed more
modification.
[1] https://github.com/microsoft/scalar
[2] https://lore.kernel.org/git/77b1da5d3063a2404cd750adfe3bb8be9b6c497d.1585946894.git.gitgitgadget@gmail.com/
Helped-by: Junio C Hamano <gister@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In rebase, one can pass the `--autostash` option to cause the worktree
to be automatically stashed before continuing with the rebase. This
option is missing in merge, however.
Implement the `--autostash` option and corresponding `merge.autoStash`
option in merge which stashes before merging and then pops after.
This option is useful when a developer has some local changes on a topic
branch but they realize that their work depends on another branch.
Previously, they had to run something like
git fetch ...
git stash push
git merge FETCH_HEAD
git stash pop
but now, that is reduced to
git fetch ...
git merge --autostash FETCH_HEAD
When an autostash is generated, it is automatically reapplied to the
worktree only in three explicit situations:
1. An incomplete merge is commit using `git commit`.
2. A merge completes successfully.
3. A merge is aborted using `git merge --abort`.
In all other situations where the merge state is removed using
remove_merge_branch_state() such as aborting a merge via
`git reset --hard`, the autostash is saved into the stash reflog
instead keeping the worktree clean.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Suggested-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When commit subjects or authors have non-ASCII characters, git
format-patch Q-encodes them so they can be safely sent over email.
However, if the patch transfer method is something other than email (web
review tools, sneakernet), this only serves to make the patch metadata
harder to read without first applying it (unless you can decode RFC 2047
in your head). git am as well as some email software supports
non-Q-encoded mail as described in RFC 6531.
Add --[no-]encode-email-headers and format.encodeEmailHeaders to let the
user control this behavior.
Signed-off-by: Emma Brooks <me@pluvano.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default value also depends on the value of submodule.recurse.
Use this opportunity to correct some grammar mistakes in
Documentation/config/fetch.txt signaled by Robert P. J. Day.
Also mention `fetch.recurseSubmodules` in fetch-options.txt. In
git-push.txt, `push.recurseSubmodules` is implicitly mentioned (by
explaining how to disable it), so no need to add it there.
Lastly add a link to `git-fetch` in `git-pull.txt` to explain the
meaning of `--recurse-submodules` there.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jacob Keller
Martin Ågren
Jeff King
Taylor Blau
Derrick Stolee
Lin Sun
Jiang Xin
Jonathan Tan
brian m. carlson
Drew DeVault
Jonathan Nieder
Johannes Schindelin
Don Goodman-Wilson
Laurent Arnoud
Denton Liu
Emma Brooks
Damien Robert