| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Inspired by 21416f0a07 ("restore: fix typo in docs", 2019-08-03), I ran
"git grep -E '(\b[a-zA-Z]+) \1\b' -- Documentation/" to find other cases
where words were duplicated, e.g. "the the", and in most cases removed
one of the repeated words.
There were many false positives by this grep command, including
deliberate repeated words like "really really" or valid uses of "that
that" which I left alone, of course.
I also did not correct any of the legitimate, accidentally repeated
words in old RelNotes.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* mr/doc-can-not-to-cannot:
doc: typo: s/can not/cannot/ and s/is does/does/
|
|
"Can not" suggests one has the option to not do something, whereas
"cannot" more strongly suggests something is disallowed or impossible.
Noticed "can not", mistakenly used instead of "cannot" in git help
glossary, then ran git grep 'can not' and found many other instances.
Only files in the Documentation folder were modified.
'Can not' also occurs in some source code comments and some test
assertion messages, and there is an error message and translation "can
not move directory into itself" which I may fix and submit separately
from the documentation change.
Also noticed and fixed "is does" in git help fetch, but there are no
other occurrences of that typo according to git grep.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the docs, test the interaction between the new default,
configuration and command line option, in addition to actually
flipping the default.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* dl/config-alias-doc:
config/alias.txt: document alias accepting non-command first word
config/alias.txt: change " and ' to `
|
|
Docfix.
* rm/gpg-program-doc-fix:
gpg(docs): use correct --verify syntax
|
|
The "git log" command learns to issue a warning when log.mailmap
configuration is not set and --[no-]mailmap option is not used, to
prepare users for future versions of Git that uses the mailmap by
default.
* ac/log-use-mailmap-by-default-transition:
tests: defang pager tests by explicitly disabling the log.mailmap warning
documentation: mention --no-use-mailmap and log.mailmap false setting
log: add warning for unspecified log.mailmap setting
|
|
Docfix.
* rm/gpg-program-doc-fix:
gpg(docs): use correct --verify syntax
|
|
"git cherry-pick/revert" learned a new "--skip" action.
* ra/cherry-pick-revert-skip:
cherry-pick/revert: advise using --skip
cherry-pick/revert: add --skip option
sequencer: use argv_array in reset_merge
sequencer: rename reset_for_rollback to reset_merge
sequencer: add advice for revert
|
|
"git blame" learned to "ignore" commits in the history, whose
effects (as well as their presence) get ignored.
* br/blame-ignore:
t8014: remove unnecessary braces
blame: drop some unused function parameters
blame: add a test to cover blame_coalesce()
blame: use the fingerprint heuristic to match ignored lines
blame: add a fingerprint heuristic to match ignored lines
blame: optionally track line fingerprints during fill_blame_origin()
blame: add config options for the output of ignored or unblamable lines
blame: add the ability to ignore commits and their changes
blame: use a helper function in blame_chunk()
Move oidset_parse_file() to oidset.c
fsck: rename and touch up init_skiplist()
|
|
The log.mailmap setting may be explicitly set to false, which disables
the mailmap feature implicity. In practice, doing so is equivalent to
always using the previously undocumented --no-use-mailmap option on the
command line.
Accordingly, we document both the existence of --no-use-mailmap as
well as briefly discuss the equivalence of it to log.mailmap=False.
Signed-off-by: Ariadne Conill <ariadne@dereferenced.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The gpg --verify usage example within the 'gpg.program' variable
reference provides an incorrect example of the gpg --verify command
arguments.
The command argument order, when providing both a detached signature
and data, should be signature first and data second:
https://gnupg.org/documentation/manuals/gnupg/Operational-GPG-Commands.html
Signed-off-by: Robert Morgan <robert.thomas.morgan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" and "git pull" reports when a fetch results in
non-fast-forward updates to let the user notice unusual situation.
The commands learned "--no-shown-forced-updates" option to disable
this safety feature.
* ds/fetch-disable-force-notice:
pull: add --[no-]show-forced-updates passthrough
fetch: warn about forced updates in branch listing
fetch: add --[no-]show-forced-updates argument
|
|
"git status" can be told a non-standard default value for the
"--[no-]ahead-behind" option with a new configuration variable
status.aheadBehind.
* jh/status-aheadbehind:
status: ignore status.aheadbehind in porcelain formats
status: warn when a/b calculation takes too long
status: add status.aheadbehind setting
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
Doc update.
* dl/config-alias-doc:
config/alias.txt: document alias accepting non-command first word
config/alias.txt: change " and ' to `
|
|
A new tag.gpgSign configuration variable turns "git tag -a" into
"git tag -s".
* tm/tag-gpgsign-config:
tag: add tag.gpgSign config option to force all tags be GPG-signed
|
|
In the case of merge conflicts, while performing a revert, we are
currently advised to use `git cherry-pick --<sequencer-options>`.
Introduce a separate advice message for `git revert`. Also change
the signature of `create_seq_dir` to handle which advice to display
selectively.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --[no-]show-forced-updates option in 'git fetch' can be confusing
for some users, especially if it is enabled via config setting and not
by argument. Add advice to warn the user that the (forced update)
messages were not listed.
Additionally, warn users when the forced update check takes longer
than ten seconds, and recommend that they disable the check. These
messages can be disabled by the advice.fetchShowForcedUpdates config
setting.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After updating a set of remove refs during a 'git fetch', we walk the
commits in the new ref value and not in the old ref value to discover
if the update was a forced update. This results in two things happening
during the command:
1. The line including the ref update has an additional "(forced-update)"
marker at the end.
2. The ref log for that remote branch includes a bit saying that update
is a forced update.
For many situations, this forced-update message happens infrequently, or
is a small bit of information among many ref updates. Many users ignore
these messages, but the calculation required here slows down their fetches
significantly. Keep in mind that they do not have the opportunity to
calculate a commit-graph file containing the newly-fetched commits, so
these comparisons can be very slow.
Add a '--[no-]show-forced-updates' option that allows a user to skip this
calculation. The only permanent result is dropping the forced-update bit
in the reflog.
Include a new fetch.showForcedUpdates config setting that allows this
behavior without including the argument in every command. The config
setting is overridden by the command-line arguments.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ahead/behind calculation in 'git status' can be slow in some
cases. Users may not realize that there are ways to avoid this
computation, especially if they are not using the information.
Add a warning that appears if this calculation takes more than
two seconds. The warning can be disabled through the new config
setting advice.statusAheadBehind.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --[no-]ahead-behind option was introduced in fd9b544a
(status: add --[no-]ahead-behind to status and commit for V2
format, 2018-01-09). This is a necessary change of behavior
in repos where the remote tracking branches can move very
quickly ahead of the local branches. However, users need to
remember to provide the command-line argument every time.
Add a new "status.aheadBehind" config setting to change the
default behavior of all git status formats.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch" learns a configuration to set the default for
its --notes=<ref> option.
* dl/format-patch-notes-config:
format-patch: teach format.notes config option
git-format-patch.txt: document --no-notes option
|
|
One can see that an alias that begins with a non-command first word,
such as `loud-rebase = -c commit.verbose=true rebase`, is permitted.
However, this isn't immediately obvious to users as alias instances
typically begin with a command.
Document the fact that an alias can begin with a non-command first word
so that users will be able to discover that this is a feature.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before, the documentation would mix " and ' for code and config
snippets. Change these instances to ` so that they are marked up in
monospace.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As many CI/CD tools don't allow to control command line options when
executing `git tag` command, a default value in the configuration file
will allow to enforce tag signing if required.
The new config-file option tag.gpgSign is added to define default behavior
of tag signings. To override default behavior the command line option -s,
--sign and --no-sign can be used:
$ git tag -m "commit message"
will generate a GPG signed tag if tag.gpgSign option is true, while
$ git tag --no-sign -m "commit message"
will skip the signing step.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For an environment variable that is supposed to be set by users, the
GIT_TR2* env vars are just too unclear, inconsistent, and ugly.
Most of the established GIT_* environment variables don't use
abbreviations, and in case of the few that do (GIT_DIR,
GIT_COMMON_DIR, GIT_DIFF_OPTS) it's quite obvious what the
abbreviations (DIR and OPTS) stand for. But what does TR stand for?
Track, traditional, trailer, transaction, transfer, transformation,
transition, translation, transplant, transport, traversal, tree,
trigger, truncate, trust, or ...?!
The trace2 facility, as the '2' suffix in its name suggests, is
supposed to eventually supercede Git's original trace facility. It's
reasonable to expect that the corresponding environment variables
follow suit, and after the original GIT_TRACE variables they are
called GIT_TRACE2; there is no such thing is 'GIT_TR'.
All trace2-specific config variables are, very sensibly, in the
'trace2' section, not in 'tr2'.
OTOH, we don't gain anything at all by omitting the last three
characters of "trace" from the names of these environment variables.
So let's rename all GIT_TR2* environment variables to GIT_TRACE2*,
before they make their way into a stable release.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git-format-patch, notes can be appended with the `--notes` option.
However, this must be specified by the user on an
invocation-by-invocation basis. If a user is not careful, it's possible
that they may forget to include it and generate a patch series without
notes.
Teach git-format-patch the `format.notes` config option. Its value is a
notes ref that will be automatically appended. The special value of
"standard" can be used to specify the standard notes. This option is
overridable with the `--no-notes` option in case a user wishes not to
append notes.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When ignoring commits, the commit that is blamed might not be
responsible for the change, due to the inaccuracy of our heuristic.
Users might want to know when a particular line has a potentially
inaccurate blame.
Furthermore, guess_line_blames() may fail to find any parent commit for
a given line touched by an ignored commit. Those 'unblamable' lines
remain blamed on an ignored commit. Users might want to know if a line
is unblamable so that they do not spend time investigating a commit they
know is uninteresting.
This patch adds two config options to mark these two types of lines in
the output of blame.
The first option can identify ignored lines by specifying
blame.markIgnoredLines. When this option is set, each blame line that
was blamed on a commit other than the ignored commit is marked with a
'?'.
For example:
278b6158d6fdb (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
appears as:
?278b6158d6fd (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
where the '?' is placed before the commit, and the hash has one fewer
characters.
Sometimes we are unable to even guess at what ancestor commit touched a
line. These lines are 'unblamable.' The second option,
blame.markUnblamableLines, will mark the line with '*'.
For example, say we ignore e5e8d36d04cbe, yet we are unable to blame
this line on another commit:
e5e8d36d04cbe (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
appears as:
*e5e8d36d04cb (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
When these config options are used together, every line touched by an
ignored commit will be marked with either a '?' or a '*'.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commits that make formatting changes or function renames are often not
interesting when blaming a file. A user may deem such a commit as 'not
interesting' and want to ignore and its changes it when assigning blame.
For example, say a file has the following git history / rev-list:
---O---A---X---B---C---D---Y---E---F
Commits X and Y both touch a particular line, and the other commits do
not:
X: "Take a third parameter"
-MyFunc(1, 2);
+MyFunc(1, 2, 3);
Y: "Remove camelcase"
-MyFunc(1, 2, 3);
+my_func(1, 2, 3);
git-blame will blame Y for the change. I'd like to be able to ignore Y:
both the existence of the commit as well as any changes it made. This
differs from -S rev-list, which specifies the list of commits to
process for the blame. We would still process Y, but just don't let the
blame 'stick.'
This patch adds the ability for users to ignore a revision with
--ignore-rev=rev, which may be repeated. They can specify a set of
files of full object names of revs, e.g. SHA-1 hashes, one per line. A
single file may be specified with the blame.ignoreRevFile config option
or with --ignore-rev-file=file. Both the config option and the command
line option may be repeated multiple times. An empty file name "" will
clear the list of revs from previously processed files. Config options
are processed before command line options.
For a typical use case, projects will maintain the file containing
revisions for commits that perform mass reformatting, and their users
have the option to ignore all of the commits in that file.
Additionally, a user can use the --ignore-rev option for one-off
investigation. To go back to the example above, X was a substantive
change to the function, but not the change the user is interested in.
The user inspected X, but wanted to find the previous change to that
line - perhaps a commit that introduced that function call.
To make this work, we can't simply remove all ignored commits from the
rev-list. We need to diff the changes introduced by Y so that we can
ignore them. We let the blames get passed to Y, just like when
processing normally. When Y is the target, we make sure that Y does not
*keep* any blames. Any changes that Y is responsible for get passed to
its parent. Note we make one pass through all of the scapegoats
(parents) to attempt to pass blame normally; we don't know if we *need*
to ignore the commit until we've checked all of the parents.
The blame_entry will get passed up the tree until we find a commit that
has a diff chunk that affects those lines.
One issue is that the ignored commit *did* make some change, and there is
no general solution to finding the line in the parent commit that
corresponds to a given line in the ignored commit. That makes it hard
to attribute a particular line within an ignored commit's diff
correctly.
For example, the parent of an ignored commit has this, say at line 11:
commit-a 11) #include "a.h"
commit-b 12) #include "b.h"
Commit X, which we will ignore, swaps these lines:
commit-X 11) #include "b.h"
commit-X 12) #include "a.h"
We can pass that blame entry to the parent, but line 11 will be
attributed to commit A, even though "include b.h" came from commit B.
The blame mechanism will be looking at the parent's view of the file at
line number 11.
ignore_blame_entry() is set up to allow alternative algorithms for
guessing per-line blames. Any line that is not attributed to the parent
will continue to be blamed on the ignored commit as if that commit was
not ignored. Upcoming patches have the ability to detect these lines
and mark them in the blame output.
The existing algorithm is simple: blame each line on the corresponding
line in the parent's diff chunk. Any lines beyond that stay with the
target.
For example, the parent of an ignored commit has this, say at line 11:
commit-a 11) void new_func_1(void *x, void *y);
commit-b 12) void new_func_2(void *x, void *y);
commit-c 13) some_line_c
commit-d 14) some_line_d
After a commit 'X', we have:
commit-X 11) void new_func_1(void *x,
commit-X 12) void *y);
commit-X 13) void new_func_2(void *x,
commit-X 14) void *y);
commit-c 15) some_line_c
commit-d 16) some_line_d
Commit X nets two additionally lines: 13 and 14. The current
guess_line_blames() algorithm will not attribute these to the parent,
whose diff chunk is only two lines - not four.
When we ignore with the current algorithm, we get:
commit-a 11) void new_func_1(void *x,
commit-b 12) void *y);
commit-X 13) void new_func_2(void *x,
commit-X 14) void *y);
commit-c 15) some_line_c
commit-d 16) some_line_d
Note that line 12 was blamed on B, though B was the commit for
new_func_2(), not new_func_1(). Even when guess_line_blames() finds a
line in the parent, it may still be incorrect.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The stash.useBuiltin variable introduced in 90a462725e ("stash:
optionally use the scripted version again", 2019-02-25) was turned on by
default, but had no documentation.
Let's document it so that users who run into any stability issues with
the C rewrite know there's an escape hatch, and spell out that the
user should please report the bug when they have to turn off the
built-in stash.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The connectivity bitmaps are created by default in bare
repositories now; also the pathname hash-cache is created by
default to avoid making crappy deltas when repacking.
* ew/repack-with-bitmaps-by-default:
pack-objects: default to writing bitmap hash-cache
t5310: correctly remove bitmaps for jgit test
repack: enable bitmaps by default on bare repos
|
|
Polishing of the new trace2 facility continues. The system-level
configuration can specify site-wide trace2 settings, which can be
overridden with per-user configuration and environment variables.
* jh/trace2-sid-fix:
trace2: fixup access problem on /etc/gitconfig in read_very_early_config
trace2: update docs to describe system/global config settings
trace2: make SIDs more unique
trace2: clarify UTC datetime formatting
trace2: report peak memory usage of the process
trace2: use system/global config for default trace2 settings
config: add read_very_early_config()
trace2: find exec-dir before trace2 initialization
trace2: add absolute elapsed time to start event
trace2: refactor setting process starting time
config: initialize opts structure in repo_read_config()
|
|
"git tag" learned to give an advice suggesting it might be a
mistake when creating an annotated or signed tag that points at
another tag.
* dl/warn-tagging-a-tag:
tag: advise on nested tags
tag: fix formatting
|
|
"git merge-recursive" backend recently learned a new heuristics to
infer file movement based on how other files in the same directory
moved. As this is inherently less robust heuristics than the one
based on the content similarity of the file itself (rather than
based on what its neighbours are doing), it sometimes gives an
outcome unexpected by the end users. This has been toned down to
leave the renamed paths in higher/conflicted stages in the index so
that the user can examine and confirm the result.
* en/merge-directory-renames:
merge-recursive: switch directory rename detection default
merge-recursive: give callers of handle_content_merge() access to contents
merge-recursive: track information associated with directory renames
t6043: fix copied test description to match its purpose
merge-recursive: switch from (oid,mode) pairs to a diff_filespec
merge-recursive: cleanup handle_rename_* function signatures
merge-recursive: track branch where rename occurred in rename struct
merge-recursive: remove ren[12]_other fields from rename_conflict_info
merge-recursive: shrink rename_conflict_info
merge-recursive: move some struct declarations together
merge-recursive: use 'ci' for rename_conflict_info variable name
merge-recursive: rename locals 'o' and 'a' to 'obuf' and 'abuf'
merge-recursive: rename diff_filespec 'one' to 'o'
merge-recursive: rename merge_options argument from 'o' to 'opt'
Use 'unsigned short' for mode, like diff_filespec does
|
|
Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update docs around "gc".
* ab/gc-docs:
gc docs: remove incorrect reference to gc.auto=0
gc docs: clarify that "gc" doesn't throw away referenced objects
gc docs: note "gc --aggressive" in "fast-import"
gc docs: downplay the usefulness of --aggressive
gc docs: note how --aggressive impacts --window & --depth
gc docs: fix formatting for "gc.writeCommitGraph"
gc docs: re-flow the "gc.*" section in "config"
gc docs: include the "gc.*" section from "config" in "gc"
gc docs: clean grammar for "gc.bigPackThreshold"
gc docs: stop noting "repack" flags
gc docs: modernize the advice for manually running "gc"
|
|
Clean-up markup in the documentation suite.
* cb/doco-mono:
doc: format pathnames and URLs as monospace.
doc/CodingGuidelines: URLs and paths as monospace
|
|
Retire scripted "git rebase" implementation.
* ab/drop-scripted-rebase:
rebase: remove the rebase.useBuiltin setting
|
|
Documentation mark-up fixes.
* ma/asciidoctor-fixes-more:
Documentation: turn middle-of-line tabs into spaces
git-svn.txt: drop escaping '\' that ends up being rendered
git.txt: remove empty line before list continuation
config/fsck.txt: avoid starting line with dash
config/diff.txt: drop spurious backtick
|
|
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Robert Dailey reported confusion on the mailing list about a nested
tag which was most likely created by mistake. Jeff King noted that
this isn't a very common case and creating a tag-to-a-tag can be a
user-error.
Suggest that it may be a mistake with an advice message when
creating such a tag. Those who do want to create a tag that point
at another tag regularly can turn it off with the usual advice
mechanism.
Reported-by: Robert Dailey <rcdailey.lists@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
[jc: fixed test style and tweaked the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 07e7dbf0db (gc: default aggressive depth to 50, 2016-08-11) we
somewhat confusingly use the same depth under --aggressive as we do by
default.
As noted in that commit that makes sense, it was wrong to make more
depth the default for "aggressive", and thus save disk space at the
expense of runtime performance, which is usually the opposite of
someone who'd like "aggressive gc" wants.
But that's left us with a mostly-redundant configuration variable, so
let's clearly note in its documentation that it doesn't change the
default.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the AsciiDoc formatting so that an example of "gc --auto" isn't
rendered as "git-gc(1) --auto", but as "git gc --auto". This is
consistent with the rest of the links and command examples in this
documentation.
The formatting I'm changing was initially introduced in
d5d5d7b641 ("gc: automatically write commit-graph files", 2018-06-27).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Re-flow the "gc.*" section in "config". A previous commit moved this
over from the "gc" docs, but tried to keep as many of the lines
identical to benefit from diff's move detection.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than duplicating the documentation for the various "gc" options
let's include the "gc" docs from git-config. They were mostly better
already, and now we don't have the same docs in two places with subtly
different wording.
In the cases where the git-gc(1) docs were saying something the "gc"
docs in git-config(1) didn't cover move the relevant section over to
the git-config(1) docs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When all of x/a, x/b, and x/c have moved to z/a, z/b, and z/c on one
branch, there is a question about whether x/d added on a different
branch should remain at x/d or appear at z/d when the two branches are
merged. There are different possible viewpoints here:
A) The file was placed at x/d; it's unrelated to the other files in
x/ so it doesn't matter that all the files from x/ moved to z/ on
one branch; x/d should still remain at x/d.
B) x/d is related to the other files in x/, and x/ was renamed to z/;
therefore x/d should be moved to z/d.
Since there was no ability to detect directory renames prior to
git-2.18, users experienced (A) regardless of context. Choice (B) was
implemented in git-2.18, with no option to go back to (A), and has been
in use since. However, one user reported that the merge results did not
match their expectations, making the change of default problematic,
especially since there was no notice printed when directory rename
detection moved files.
Note that there is also a third possibility here:
C) There are different answers depending on the context and content
that cannot be determined by git, so this is a conflict. Use a
higher stage in the index to record the conflict and notify the
user of the potential issue instead of silently selecting a
resolution for them.
Add an option for users to specify their preference for whether to use
directory rename detection, and default to (C). Even when directory
rename detection is on, add notice messages about files moved into new
directories.
As a sidenote, x/d did not have to be a new file here; it could have
already existed at some other path and been renamed to x/d, with
directory rename detection just renaming it again to z/d. Thus, it's
not just new files, but also a modification to all rename types (normal
renames, rename/add, rename/delete, rename/rename(1to1),
rename/rename(1to2), and rename/rename(2to1)).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we switch from one branch to another, it makes sense to show a
summary of local changes since there could be conflicts, or some files
left modified.... When switch is used solely for creating a new
branch (and "switch" to the same commit) or detaching, we don't really
need to show anything.
"git checkout" does it anyway for historical reasons. But we can start
with a clean slate with switch and don't have to.
This essentially reverts fa655d8411 (checkout: optimize "git checkout
-b <new_branch>" - 2018-08-16) and make it default for switch,
but also for -B and --detach. Users of big repos are encouraged to
move to switch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
Carrying the legacy version is a maintenance burden as seen in
7e097e27d3 ("legacy-rebase: backport -C<n> and --whitespace=<option>
checks", 2018-11-20) and 9aea5e9286 ("rebase: fix regression in
rebase.useBuiltin=false test mode", 2019-02-13). Since the built-in
version has been shown to be stable enough let's remove the legacy
version.
As noted in [3] having use_builtin_rebase() shell out to get its
config doesn't make any sense anymore, that was done for the purposes
of spawning the legacy rebase without having modified any global
state. Let's instead handle this case in rebase_config().
There's still a bunch of references to git-legacy-rebase in po/*.po,
but those will be dealt with in time by the i18n effort.
Even though this configuration variable only existed two releases
let's not entirely delete the entry from the docs, but note its
absence. Individual versions of git tend to be around for a while due
to distro packaging timelines, so e.g. if we're "lucky" a given
version like 2.21 might be installed on say OSX for half a decade.
That'll mean some people probably setting this in config, and then
when they later wonder if it's needed they can Google search the
config option name or check it in git-config. It also allows us to
refer to the docs from the warning for details.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
3. https://public-inbox.org/git/nycvar.QRO.7.76.6.1903141544110.41@tvgsbejvaqbjf.bet/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Mark Rushakoff
Junio C Hamano
Ariadne Conill
Robert Morgan
Rohit Ashiwal
Derrick Stolee
Jeff Hostetler
Denton Liu
Tigran Mkrtchyan
SZEDER Gábor
Barret Rhoden
Johannes Schindelin
Nguyễn Thái Ngọc Duy
Ævar Arnfjörð Bjarmason
Elijah Newren