| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The "submodule.<name>.path" stored in .gitmodules is never copied
to .git/config and such a key in .git/config has no meaning, but
the documentation described it and submodule.<name>.url next to
each other as if both belong to .git/config. This has been fixed.
* sb/submodule-config-doc-drop-path:
documentation: improve submodule.<name>.{url, path} description
|
|
Unlike the url variable a user cannot override the the path variable,
as it is part of the content together with the gitlink at the given
path. To avoid confusion do not mention the .path variable in the config
section and rely on the documentation provided in gitmodules[5].
Enhance the description of submodule.<name>.url and mention its two use
cases separately.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In recent versions of cURL, GSSAPI credential delegation is
disabled by default due to CVE-2011-2192; introduce a configuration
to selectively allow enabling this.
* ps/http-gssapi-cred-delegation:
http: control GSSAPI credential delegation
|
|
Delegation of credentials is disabled by default in libcurl since
version 7.21.7 due to security vulnerability CVE-2011-2192. Which
makes troubles with GSS/kerberos authentication when delegation
of credentials is required. This can be changed with option
CURLOPT_GSSAPI_DELEGATION in libcurl with set expected parameter
since libcurl version 7.22.0.
This patch provides new configuration variable http.delegation
which corresponds to curl parameter "--delegation" (see man 1 curl).
The following values are supported:
* none (default).
* policy
* always
Signed-off-by: Petr Stodulka <pstodulk@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation for individual configuration variables to control use
of color (like `color.grep`) said that their default value is
'false', instead of saying their default is taken from `color.ui`.
When we updated the default value for color.ui from 'false' to
'auto' quite a while ago, all of them broke. This has been
corrected.
* mm/config-color-ui-default-to-auto:
Documentation/config: default for color.* is color.ui
|
|
"git gc --aggressive" used to limit the delta-chain length to 250,
which is way too deep for gaining additional space savings and is
detrimental for runtime performance. The limit has been reduced to
50.
* jk/reduce-gc-aggressive-depth:
gc: default aggressive depth to 50
|
|
Since 4c7f181 (make color.ui default to 'auto', 2013-06-10), the
default for color.* when nothing is set is 'auto' and we still claimed
that the default was 'false'. Be more precise by saying explicitly
that the default is to follow color.ui, and recall that the default is
'auto' to avoid one indirection for the reader.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone --resurse-submodules --reference $path $URL" is a way to
reduce network transfer cost by borrowing objects in an existing
$path repository when cloning the superproject from $URL; it
learned to also peek into $path for presense of corresponding
repositories of submodules and borrow objects from there when able.
* sb/submodule-clone-rr:
clone: recursive and reference option triggers submodule alternates
clone: implement optional references
clone: clarify option_reference as required
clone: factor out checking for an alternate path
submodule--helper update-clone: allow multiple references
submodule--helper module-clone: allow multiple references
t7408: merge short tests, factor out testing method
t7408: modernize style
|
|
Receive-pack feeds its input to either index-pack or
unpack-objects, which will happily accept as many bytes as
a sender is willing to provide. Let's allow an arbitrary
cutoff point where we will stop writing bytes to disk.
Cleaning up what has already been written to disk is a
related problem that is not addressed by this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `--recursive` and `--reference` is given, it is reasonable to
expect that the submodules are created with references to the submodules
of the given alternate for the superproject.
An initial attempt to do this was presented to the mailing list, which
used flags that are passed around ("--super-reference") that instructed
the submodule clone to look for a reference in the submodules of the
referenced superproject. This is not well thought out, as any further
`submodule update` should also respect the initial setup.
When a new submodule is added to the superproject and the alternate
of the superproject does not know about that submodule yet, we rather
error out informing the user instead of being unclear if we did or did
not use a submodules alternate.
To solve this problem introduce new options that store the configuration
for what the user wanted originally.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit message is long and has lots of background and
numbers. The summary is: the current default of 250 doesn't
save much space, and costs CPU. It's not a good tradeoff.
Read on for details.
The "--aggressive" flag to git-gc does three things:
1. use "-f" to throw out existing deltas and recompute from
scratch
2. use "--window=250" to look harder for deltas
3. use "--depth=250" to make longer delta chains
Items (1) and (2) are good matches for an "aggressive"
repack. They ask the repack to do more computation work in
the hopes of getting a better pack. You pay the costs during
the repack, and other operations see only the benefit.
Item (3) is not so clear. Allowing longer chains means fewer
restrictions on the deltas, which means potentially finding
better ones and saving some space. But it also means that
operations which access the deltas have to follow longer
chains, which affects their performance. So it's a tradeoff,
and it's not clear that the tradeoff is even a good one.
The existing "250" numbers for "--aggressive" come
originally from this thread:
http://public-inbox.org/git/alpine.LFD.0.9999.0712060803430.13796@woody.linux-foundation.org/
where Linus says:
So when I said "--depth=250 --window=250", I chose those
numbers more as an example of extremely aggressive
packing, and I'm not at all sure that the end result is
necessarily wonderfully usable. It's going to save disk
space (and network bandwidth - the delta's will be re-used
for the network protocol too!), but there are definitely
downsides too, and using long delta chains may
simply not be worth it in practice.
There are some numbers in that thread, but they're mostly
focused on the improved window size, and measure the
improvement from --depth=250 and --window=250 together.
E.g.:
http://public-inbox.org/git/9e4733910712062006l651571f3w7f76ce64c6650dff@mail.gmail.com/
talks about the improved run-time of "git-blame", which
comes from the reduced pack size. But most of that reduction
is coming from --window=250, whereas most of the extra costs
come from --depth=250. There's a link in that thread showing
that increasing the depth beyond 50 doesn't seem to help
much with the size:
https://vcscompare.blogspot.com/2008/06/git-repack-parameters.html
but again, no discussion of the timing impact.
In an earlier thread from Ted Ts'o which discussed setting
the non-aggressive default (from 10 to 50):
http://public-inbox.org/git/20070509134958.GA21489%40thunk.org/
we have more numbers, with the conclusion that going past 50
does not help size much, and hurts the speed of normal
operations.
So from that, we might guess that 50 is actually a sweet
spot, even for aggressive, if we interpret aggressive to
"spend time now to make a better pack". It is not clear that
"--depth=250" is actually a better pack. It may be slightly
_smaller_, but it carries a run-time penalty.
Here are some more recent timings I did to verify that. They
show three things:
- the size of the resulting pack (so disk saved to store,
bandwidth saved on clones/fetches)
- the cost of "rev-list --objects --all", which shows the
effect of the delta chains on trees (commits typically
don't delta, and the command doesn't touch the blobs at
all)
- the cost of "log -Sfoo", which will additionally access
each blob
All cases were repacked with "git repack -adf --depth=$d
--window=250" (so basically, what would happen if we tweaked
the "gc --aggressive" default depth).
The timings are all wall-clock best-of-3. The machine itself
has plenty of RAM compared to the repositories (which is
probably typical of most workstations these days), so we're
really measuring CPU usage, as the whole thing will be in
disk cache after the first run.
The core.deltaBaseCacheLimit is at its default of 96MiB.
It's possible that tweaking it would have some impact on the
tests, as some of them (especially "log -S" on a large repo)
are likely to overflow that. But bumping that carries a
run-time memory cost, so for these tests, I focused on what
we could do just with the on-disk pack tradeoffs.
Each test is done for four depths: 250 (the current value),
50 (the current default that tested well previously), 100
(to show something on the larger side, which previous tests
showed was not a good tradeoff), and 10 (the very old
default, which previous tests showed was worse than 50).
Here are the numbers for linux.git:
depth | size | % | rev-list | % | log -Sfoo | %
-------+-------+-------+----------+--------+-----------+-------
250 | 967MB | n/a | 48.159s | n/a | 378.088 | n/a
100 | 971MB | +0.4% | 41.471s | -13.9% | 342.060 | -9.5%
50 | 979MB | +1.2% | 37.778s | -21.6% | 311.040s | -17.7%
10 | 1.1GB | +6.6% | 32.518s | -32.5% | 279.890s | -25.9%
and for git.git:
depth | size | % | rev-list | % | log -Sfoo | %
-------+-------+-------+----------+--------+-----------+-------
250 | 48MB | n/a | 2.215s | n/a | 20.922s | n/a
100 | 49MB | +0.5% | 2.140s | -3.4% | 17.736s | -15.2%
50 | 49MB | +1.7% | 2.099s | -5.2% | 15.418s | -26.3%
10 | 53MB | +9.3% | 2.001s | -9.7% | 12.677s | -39.4%
You can see that that the CPU savings for regular operations improves as we
decrease the depth. The savings are less for "rev-list" on a smaller repository
than they are for blob-accessing operations, or even rev-list on a larger
repository. This may mean that a larger delta cache would help (though setting
core.deltaBaseCacheLimit by itself doesn't).
But we can also see that the space savings are not that great as the depth goes
higher. Saving 5-10% between 10 and 50 is probably worth the CPU tradeoff.
Saving 1% to go from 50 to 100, or another 0.5% to go from 100 to 250 is
probably not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch" learned format.from configuration variable to
specify the default settings for its "--from" option.
* jt/format-patch-from-config:
format-patch: format.from gives the default for --from
|
|
"git push" and "git clone" learned to give better progress meters
to the end user who is waiting on the terminal.
* jk/push-progress:
receive-pack: send keepalives during quiet periods
receive-pack: turn on connectivity progress
receive-pack: relay connectivity errors to sideband
receive-pack: turn on index-pack resolving progress
index-pack: add flag for showing delta-resolution progress
clone: use a real progress meter for connectivity check
check_connected: add progress flag
check_connected: relay errors to alternate descriptor
check_everything_connected: use a struct with named options
check_everything_connected: convert to argv_array
rev-list: add optional progress reporting
check_everything_connected: always pass --quiet to rev-list
|
|
"git push" learned to accept and pass extra options to the
receiving end so that hooks can read and react to them.
* sb/push-options:
add a test for push options
push: accept push options
receive-pack: implement advertising and receiving push options
push options: {pre,post}-receive hook learns about push options
|
|
This helps users who would prefer format-patch to default to --from,
and makes it easier to change the default in the future.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More mark-up updates to typeset strings that are expected to
literally typed by the end user in fixed-width font.
* mm/doc-tt:
doc: typeset HEAD and variants as literal
CodingGuidelines: formatting HEAD in documentation
doc: typeset long options with argument as literal
doc: typeset '--' as literal
doc: typeset long command-line options as literal
doc: typeset short command-line options as literal
Documentation/git-mv.txt: fix whitespace indentation
|
|
"git merge" with renormalization did not work well with
merge-recursive, due to "safer crlf" conversion kicking in when it
shouldn't.
* jc/renormalize-merge-kill-safer-crlf:
merge: avoid "safer crlf" during recording of merge results
convert: unify the "auto" handling of CRLF
|
|
After a client has sent us the complete pack, we may spend
some time processing the data and running hooks. If the
client asked us to be quiet, receive-pack won't send any
progress data during the index-pack or connectivity-check
steps. And hooks may or may not produce their own progress
output. In these cases, the network connection is totally
silent from both ends.
Git itself doesn't care about this (it will wait forever),
but other parts of the system (e.g., firewalls,
load-balancers, etc) might hang up the connection. So we'd
like to send some sort of keepalive to let the network and
the client side know that we're still alive and processing.
We can use the same trick we did in 05e9515 (upload-pack:
send keepalive packets during pack computation, 2013-09-08).
Namely, we will send an empty sideband data packet every `N`
seconds that we do not relay any stderr data over the
sideband channel. As with 05e9515, this means that we won't
bother sending keepalives when there's actual progress data,
but will kick in when it has been disabled (or if there is a
lull in the progress data).
The concept is simple, but the details are subtle enough
that they need discussing here.
Before the client sends us the pack, we don't want to do any
keepalives. We'll have sent our ref advertisement, and we're
waiting for them to send us the pack (and tell us that they
support sidebands at all).
While we're receiving the pack from the client (or waiting
for it to start), there's no need for keepalives; it's up to
them to keep the connection active by sending data.
Moreover, it would be wrong for us to do so. When we are the
server in the smart-http protocol, we must treat our
connection as half-duplex. So any keepalives we send while
receiving the pack would potentially be buffered by the
webserver. Not only does this make them useless (since they
would not be delivered in a timely manner), but it could
actually cause a deadlock if we fill up the buffer with
keepalives. (It wouldn't be wrong to send keepalives in this
phase for a full-duplex connection like ssh; it's simply
pointless, as it is the client's responsibility to speak).
As soon as we've gotten all of the pack data, then the
client is waiting for us to speak, and we should start
keepalives immediately. From here until the end of the
connection, we send one any time we are not otherwise
sending data.
But there's a catch. Receive-pack doesn't know the moment
we've gotten all the data. It passes the descriptor to
index-pack, who reads all of the data, and then starts
resolving the deltas. We have to communicate that back.
To make this work, we instruct the sideband muxer to enable
keepalives in three phases:
1. In the beginning, not at all.
2. While reading from index-pack, wait for a signal
indicating end-of-input, and then start them.
3. Afterwards, always.
The signal from index-pack in phase 2 has to come over the
stderr channel which the muxer is reading. We can't use an
extra pipe because the portable run-command interface only
gives us stderr and stdout.
Stdout is already used to pass the .keep filename back to
receive-pack. We could also send a signal there, but then we
would find out about it in the main thread. And the
keepalive needs to be done by the async muxer thread (since
it's the one writing sideband data back to the client). And
we can't reliably signal the async thread from the main
thread, because the async code sometimes uses threads and
sometimes uses forked processes.
Therefore the signal must come over the stderr channel,
where it may be interspersed with other random
human-readable messages from index-pack. This patch makes
the signal a single NUL byte. This is easy to parse, should
not appear in any normal stderr output, and we don't have to
worry about any timing issues (like seeing half the signal
bytes in one read(), and half in a subsequent one).
This is a bit ugly, but it's simple to code and should work
reliably.
Another option would be to stop using an async thread for
muxing entirely, and just poll() both stderr and stdout of
index-pack from the main thread. This would work for
index-pack (because we aren't doing anything useful in the
main thread while it runs anyway). But it would make the
connectivity check and the hook muxers much more
complicated, as they need to simultaneously feed the
sub-programs while reading their stderr.
The index-pack phase is the only one that needs this
signaling, so it could simply behave differently than the
other two. That would mean having two separate
implementations of copy_to_sideband (and the keepalive
code), though. And it still doesn't get rid of the
signaling; it just means we can write a nicer message like
"END_OF_INPUT" or something on stdout, since we don't have
to worry about separating it from the stderr cruft.
One final note: this signaling trick is only done with
index-pack, not with unpack-objects. There's no point in
doing it for the latter, because by definition it only kicks
in for a small number of objects, where keepalives are not
as useful (and this conveniently lets us avoid duplicating
the implementation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the look of the way "git fetch" reports what happened to
each ref that was fetched.
* nd/fetch-ref-summary:
fetch: reduce duplicate in ref update status lines with placeholder
fetch: align all "remote -> local" output
fetch: change flag code for displaying tag update and deleted ref
fetch: refactor ref update status formatting code
git-fetch.txt: document fetch output
|
|
A new configuration variable core.sshCommand has been added to
specify what value for GIT_SSH_COMMAND to use per repository.
* nd/connect-ssh-command-config:
connect: read $GIT_SSH_COMMAND from config file
|
|
The pre/post receive hook may be interested in more information from the
user. This information can be transmitted when both client and server
support the "push-options" capability, which when used is a phase directly
after update commands ended by a flush pkt.
Similar to the atomic option, the server capability can be disabled via
the `receive.advertisePushOptions` config variable. While documenting
this, fix a nit in the `receive.advertiseAtomic` wording.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More mark-up updates to typeset strings that are expected to
literally typed by the end user in fixed-width font.
* mm/doc-tt:
doc: typeset HEAD and variants as literal
CodingGuidelines: formatting HEAD in documentation
doc: typeset long options with argument as literal
doc: typeset '--' as literal
doc: typeset long command-line options as literal
doc: typeset short command-line options as literal
Documentation/git-mv.txt: fix whitespace indentation
|
|
The output coloring scheme learned two new attributes, italic and
strike, in addition to existing bold, reverse, etc.
* jk/ansi-color:
color: support strike-through attribute
color: support "italic" attribute
color: allow "no-" for negating attributes
color: refactor parse_attr
add skip_prefix_mem helper
doc: refactor description of color format
color: fix max-size comment
|
|
Similar to $GIT_ASKPASS or $GIT_PROXY_COMMAND, we also read from
config file first then fall back to $GIT_SSH_COMMAND.
This is useful for selecting different private keys targetting the
same host (e.g. github)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"upload-pack" allows a custom "git pack-objects" replacement when
responding to "fetch/clone" via the uploadpack.packObjectsHook.
* jk/upload-pack-hook:
upload-pack: provide a hook for running pack-objects
t1308: do not get fooled by symbolic links to the source tree
config: add a notion of "scope"
config: return configset value for current_config_ functions
config: set up config_source for command-line config
git_config_parse_parameter: refactor cleanup code
git_config_with_options: drop "found" counting
|
|
The documentation set has been updated so that literal commands,
configuration variables and environment variables are consistently
typeset in fixed-width font and bold in manpages.
* tr/doc-tt:
doc: change configuration variables format
doc: more consistency in environment variables format
doc: change environment variables format
doc: clearer rule about formatting literals
|
|
Before this change,
$ echo "* text=auto" >.gitattributes
$ echo "* eol=crlf" >>.gitattributes
would have the same effect as
$ echo "* text" >.gitattributes
$ git config core.eol crlf
Since the 'eol' attribute had higher priority than 'text=auto', this may
corrupt binary files and is not what most users expect to happen.
Make the 'eol' attribute to obey 'text=auto' and now
$ echo "* text=auto" >.gitattributes
$ echo "* eol=crlf" >>.gitattributes
behaves the same as
$ echo "* text=auto" >.gitattributes
$ git config core.eol crlf
In other words,
$ echo "* text=auto eol=crlf" >.gitattributes
has the same effect as
$ git config core.autocrlf true
and
$ echo "* text=auto eol=lf" >.gitattributes
has the same effect as
$ git config core.autocrlf input
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the "remote -> local" line, if either ref is a substring of the
other, the common part in the other string is replaced with "*". For
example
abc -> origin/abc
refs/pull/123/head -> pull/123
become
abc -> origin/*
refs/*/head -> pull/123
Activated with fetch.output=compact.
For the record, this output is not perfect. A single giant ref can
push all refs very far to the right and likely be wrapped around. We
may have a few options:
- exclude these long lines smarter
- break the line after "->", exclude it from column width calculation
- implement a new format, { -> origin/}foo, which makes the problem
go away at the cost of a bit harder to read
- reverse all the arrows so we have "* <- looong-ref", again still
hard to read.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similarly to the previous commit, use backquotes instead of
forward-quotes, for long options.
This was obtained with:
perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt
and manual tweak to remove false positive in ascii-art (o'--o'--o' to
describe rewritten history).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was common in our documentation to surround short option names with
forward quotes, which renders as italic in HTML. Instead, use backquotes
which renders as monospace. This is one more step toward conformance to
Documentation/CodingGuidelines.
This was obtained with:
perl -pi -e "s/'(-[a-z])'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation set has been updated so that literal commands,
configuration variables and environment variables are consistently
typeset in fixed-width font and bold in manpages.
* tr/doc-tt:
doc: change configuration variables format
doc: more consistency in environment variables format
doc: change environment variables format
doc: clearer rule about formatting literals
|
|
This is the only remaining attribute that is commonly
supported (at least by xterm) that we don't support. Let's
add it for completeness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already support bold, underline, and similar attributes.
Let's add italic to the mix. According to the Wikipedia
page on ANSI colors, this attribute is "not widely
supported", but it does seem to work on my xterm.
We don't have to bump the maximum color size because we were
already over-allocating it (but we do adjust the comment
appropriately).
Requested-by: Simon Courtois <scourtois@cubyx.fr>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using "no-bold" rather than "nobold" is easier to read and
more natural to type (to me, anyway, even though I was the
person who introduced "nobold" in the first place). It's
easy to allow both.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a general cleanup of the description of colors in
git-config, mostly to address inaccuracies and confusion
that had grown over time:
- you can have many attributes, not just one
- the discussion flip-flopped between colors and
attributes; now we discuss everything about colors, then
everything about attributes
- many concepts were lumped into the first paragraph,
making it hard to read, and especially to find the
actual lists of colors and attributes. I stopped short
of breaking those out into their own lists, as it seemed
like an excessive use of vertical screen real estate.
- we introduced negated attributes, but then the next
paragraph basically explains how each item starts off
with no attributes. So why would one need negated
attributes? We now explain.
- minor typo, language, and typography fixes
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fast-import" learned the same performance trick to avoid
creating too small a packfile as "git fetch" and "git push" have,
using *.unpackLimit configuration.
* ew/fast-import-unpack-limit:
fast-import: invalidate pack_id references after loosening
fast-import: implement unpack limit
|
|
This change configuration variables that where in italic style
to monospace font according to the guideline. It was obtained with
grep '[[:alpha:]]*\.[[:alpha:]]*::$' config.txt | \
sed -e 's/::$//' -e 's/\./\\\\./' | \
xargs -iP perl -pi -e "s/\'P\'/\`P\`/g" ./*.txt
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Wrap with backticks (monospaced font) unwrapped or single-quotes wrapped
(italic type) environment variables which are followed by the word
"environment". It was obtained with:
perl -pi -e "s/\'?(\\\$?[0-9A-Z\_]+)\'?(?= environment ?)/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change GIT_* variables that where in italic style to monospaced font
according to the guideline. It was obtained with
perl -pi -e "s/\'(GIT_.*?)\'/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A couple of bugs around core.autocrlf have been fixed.
* tb/core-eol-fix:
convert.c: ident + core.autocrlf didn't work
t0027: test cases for combined attributes
convert: allow core.autocrlf=input and core.eol=crlf
t0027: make commit_chk_wrnNNO() reliable
|
|
When upload-pack serves a client request, it turns to
pack-objects to do the heavy lifting of creating a
packfile. There's no easy way to intercept the call to
pack-objects, but there are a few good reasons to want to do
so:
1. If you're debugging a client or server issue with
fetching, you may want to store a copy of the generated
packfile.
2. If you're gathering data from real-world fetches for
performance analysis or debugging, storing a copy of
the arguments and stdin lets you replay the pack
generation at your leisure.
3. You may want to insert a caching layer around
pack-objects; it is the most CPU- and memory-intensive
part of serving a fetch, and its output is a pure
function[1] of its input, making it an ideal place to
consolidate identical requests.
This patch adds a simple "hook" interface to intercept calls
to pack-objects. The new test demonstrates how it can be
used for debugging (using it for caching is a
straightforward extension; the tricky part is writing the
actual caching layer).
This hook is unlike the normal hook scripts found in the
"hooks/" directory of a repository. Because we promise that
upload-pack is safe to run in an untrusted repository, we
cannot execute arbitrary code or commands found in the
repository (neither in hooks/, nor in the config). So
instead, this hook is triggered from a config variable that
is explicitly ignored in the per-repo config.
The config variable holds the actual shell command to run as
the hook. Another approach would be to simply treat it as a
boolean: "should I respect the upload-pack hooks in this
repo?", and then run the script from "hooks/" as we usually
do. However, that isn't as flexible; there's no way to run a
hook approved by the site administrator (e.g., in
"/etc/gitconfig") on a repository whose contents are not
trusted. The approach taken by this patch is more
fine-grained, if a little less conventional for git hooks
(it does behave similar to other configured commands like
diff.external, etc).
[1] Pack-objects isn't _actually_ a pure function. Its
output depends on the exact packing of the object
database, and if multi-threading is used for delta
compression, can even differ racily. But for the
purposes of caching, that's OK; of the many possible
outputs for a given input, it is sufficient only that we
output one of them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"http.cookieFile" configuration variable clearly wants a pathname,
but we forgot to treat it as such by e.g. applying tilde expansion.
* bn/http-cookiefile-config:
http: expand http.cookieFile as a path
Documentation: config: improve word ordering for http.cookieFile
|
|
We forgot to add "git log --decorate=auto" to documentation when we
added the feature back in v2.1.0 timeframe.
* rj/log-decorate-auto:
log: document the --decorate=auto option
|
|
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many 'linkgit:<git documentation page>' references were broken,
which are all fixed with this.
* jc/linkgit-fix:
Documentation: fix linkgit references
|
|
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
|
|
Doc formatting fixes.
* bn/config-doc-tt- |
Junio C Hamano
Stefan Beller
Petr Stodulka
Matthieu Moy
Jeff King
Josh Triplett
Nguyễn Thái Ngọc Duy
Torsten Bögershausen
Tom Russello
Ramsay Jones