| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* mg/alias-expose-prefix:
handle_alias: provide GIT_PREFIX to !alias
t1020: test !alias in subdirectory
|
|
* mg/diff-uiconfig-doc:
config.txt,diff-options.txt: porcelain vs. plumbing for color.diff
|
|
* mz/rebase: (34 commits)
rebase: define options in OPTIONS_SPEC
Makefile: do not install sourced rebase scripts
rebase: use @{upstream} if no upstream specified
rebase -i: remove unnecessary state rebase-root
rebase -i: don't read unused variable preserve_merges
git-rebase--am: remove unnecessary --3way option
rebase -m: don't print exit code 2 when merge fails
rebase -m: remember allow_rerere_autoupdate option
rebase: remember strategy and strategy options
rebase: remember verbose option
rebase: extract code for writing basic state
rebase: factor out sub command handling
rebase: make -v a tiny bit more verbose
rebase -i: align variable names
rebase: show consistent conflict resolution hint
rebase: extract am code to new source file
rebase: extract merge code to new source file
rebase: remove $branch as synonym for $orig_head
rebase -i: support --stat
rebase: factor out call to pre-rebase hook
...
|
|
* rr/doc-content-type:
Documentation: Allow custom diff tools to be specified in 'diff.tool'
Documentation: Add diff.<driver>.* to config
Documentation: Move diff.<driver>.* from config.txt to diff-config.txt
Documentation: Add filter.<driver>.* to config
|
|
* jc/pack-objects-bigfile:
Teach core.bigfilethreashold to pack-objects
|
|
Reading the diff-family and config man pages one may think that the
color.diff and color.ui settings apply to all diff commands. Make it
clearer that they do not apply to the plumbing variants
diff-{files,index,tree}.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Provide an environment variable GIT_PREFIX which contains the subdirectory
from which a !alias was called (i.e. 'git rev-parse --show-prefix') since
these cd to the to level directory before they are executed.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although the gitattributes page contains comprehensive information
about these configuration options, they should be included in the
config documentation for completeness.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pack-objects command should take notice of the object file and
refrain from attempting to delta large ones, to be consistent with
the fast-import command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: trivial grammar fix in core.worktree description
gitweb: Fix parsing of negative fractional timezones in JavaScript
|
|
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Conflicts:
builtin/fetch.c
submodule.c
|
|
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* lt/default-abbrev:
Rename core.abbrevlength back to core.abbrev
Make the default abbrev length configurable
|
|
* jr/grep-en-config:
grep: allow -E and -n to be turned on by default via configuration
|
|
* maint:
contrib/thunderbird-patch-inline: do not require bash to run the script
t8001: check the exit status of the command being tested
strbuf.h: remove a tad stale docs-in-comment and reference api-doc instead
Typos: t/README
Documentation/config.txt: make truth value of numbers more explicit
git-pack-objects.txt: fix grammatical errors
parse-remote: replace unnecessary sed invocation
|
|
Add two configration variables grep.extendedRegexp and grep.lineNumbers to
allow the user to skip typing -E and -n on the command line, respectively.
Scripts that are meant to be used by random users and/or in random
repositories now have use -G and/or --no-line-number options as
appropriately to override the settings in the repository or user's
~/.gitconfig settings. Just because the script didn't say "git grep -n" no
longer guarantees that the output from the command will not have line
numbers.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the order to 1/0 to have the same true/false order as the rest
of the possibilities for a boolean variable in order not not confuse
users.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* lt/default-abbrev:
Rename core.abbrevlength back to core.abbrev
Make the default abbrev length configurable
|
|
It corresponds to --abbrev=$n command line option after all.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jh/push-default-upstream-configname:
push.default: Rename 'tracking' to 'upstream'
|
|
The default of 7 comes from fairly early in git development, when
seven hex digits was a lot (it covers about 250+ million hash
values). Back then I thought that 65k revisions was a lot (it was what
we were about to hit in BK), and each revision tends to be about 5-10
new objects or so, so a million objects was a big number.
These days, the kernel isn't even the largest git project, and even
the kernel has about 220k revisions (_much_ bigger than the BK tree
ever was) and we are approaching two million objects. At that point,
seven hex digits is still unique for a lot of them, but when we're
talking about just two orders of magnitude difference between number
of objects and the hash size, there _will_ be collisions in truncated
hash values. It's no longer even close to unrealistic - it happens all
the time.
We should both increase the default abbrev that was unrealistically
small, _and_ add a way for people to set their own default per-project
in the git config file.
This is the first step to first make it configurable; the default of 7
is not raised yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Revert "core.abbrevguard: Ensure short object names stay unique a bit longer"
|
|
This reverts commit 72a5b561fc1c4286bc7c5b0693afc076af261e1f, as adding
fixed number of hexdigits more than necessary to make one object name
locally unique does not help in futureproofing the uniqueness of names
we generate today.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now the behavior of fetch and pull can be configured to the recently added
'on-demand' mode separately for each submodule too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To enable the user to change the default behavior of "git fetch" and "git
pull" regarding submodule recursion add the new "on-demand" value which
has just been added to the "--recurse-submodules" command line option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Users are sometimes confused with two different types of "tracking" behavior
in Git: "remote-tracking" branches (e.g. refs/remotes/*/*) versus the
merge/rebase relationship between a local branch and its @{upstream}
(controlled by branch.foo.remote and branch.foo.merge config settings).
When the push.default is set to 'tracking', it specifies that a branch should
be pushed to its @{upstream} branch. In other words, setting push.default to
'tracking' applies only to the latter of the above two types of "tracking"
behavior.
In order to make this more understandable to the user, we rename the
push.default == 'tracking' option to push.default == 'upstream'.
push.default == 'tracking' is left as a deprecated synonym for 'upstream'.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git rebase' without arguments is currently not supported. Make it
default to 'git rebase @{upstream}'. That is also what 'git pull
[--rebase]' defaults to, so it only makes sense that 'git rebase'
defaults to the same thing.
Defaulting to @{upstream} will make it possible to run e.g. 'git
rebase -i' without arguments, which is probably a quite common use
case. It also improves the scenario where you have multiple branches
that rebase against a remote-tracking branch, where you currently have
to choose between the extra network delay of 'git pull' or the
slightly awkward keys to enter 'git rebase @{u}'.
The error reporting when no upstream is configured for the current
branch or when no branch is checked out is reused from git-pull.sh. A
function is extracted into git-parse-remote.sh for this purpose.
Helped-by: Yann Dirson <ydirson@altern.org>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
|
|
This reverts commit f5e025a9d5b35e24768475f6890b836ce0d5ed15.
The commit reflected what the code did. But the code did that because
it had bugs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
gitweb: Include links to feeds in HTML header only for '200 OK' response
fsck docs: remove outdated and useless diagnostic
userdiff: fix typo in ruby and python word regexes
trace.c: mark file-local function static
Fix typo in git-gc document.
|
|
The variable gc.packrefs for git-gc can be set to true, false and
"notbare", not "nobare".
Signed-off-by: Jiang Xin <jiangxin@ossxp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/fetch-submodule-recursive:
fetch_populated_submodules(): document dynamic allocation
Submodules: Add the "fetchRecurseSubmodules" config option
Add the 'fetch.recurseSubmodules' config setting
fetch/pull: Add the --recurse-submodules option
Conflicts:
builtin/fetch.c
|
|
* aa/status-hilite-branch:
default color.status.branch to "same as header"
status: show branchname with a configurable color
|
|
* js/configurable-tab:
Make the tab width used for whitespace checks configurable
apply --whitespace=fix: fix tab-in-indent
|
|
* jk/pager-per-command:
allow command-specific pagers in pager.<cmd>
|
|
* jc/abbrev-guard:
core.abbrevguard: Ensure short object names stay unique a bit longer
|
|
* maint:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
|
|
* maint-1.7.2:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
|
|
* maint-1.7.1:
add: introduce add.ignoreerrors synonym for add.ignore-errors
|
|
* maint-1.7.0:
add: introduce add.ignoreerrors synonym for add.ignore-errors
|
|
A new whitespace "rule" is added that sets the tab width to use for
whitespace checks and fix-ups and replaces the hard-coded constant 8.
Since the setting is part of the rules, it can be set per file using
.gitattributes.
The new configuration is backwards compatible because older git versions
simply ignore unknown whitespace rules.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "[add] ignore-errors" tweakable introduced by v1.5.6-rc0~30^2 (Add
a config option to ignore errors for git-add, 2008-05-12) does not
follow the usual convention for naming values in the git configuration
file.
What convention? Glad you asked.
The section name indicates the affected subsystem.
The subsection name, if any, indicates which of
an unbound set of things to set the value for.
The variable name describes the effect of tweaking
this knob.
The section and variable names can be broken into
words using bumpyCaps in documentation as a hint to
the reader. These word breaks are not significant
at the level of code, since the section and variable
names are not case sensitive.
The name "add.ignore-errors" includes a dash, meaning a naive
configuration file like
[add]
ignoreErrors
does not have any effect. Avoid such confusion by renaming to the
more consistent add.ignoreErrors, but keep the old version for
backwards compatibility.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
You can tell "git status" to paint the name of the current branch in its
output (the line that says "On branch ...") by setting the configuration
variable color.status.branch; it is by default turned off.
Signed-off-by: Aleksi Aalto <aga@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/repack-reuse-object:
Documentation: pack.compression: explain how to recompress
repack: add -F flag to let user choose between --no-reuse-delta/object
Conflicts:
Documentation/git-repack.txt
|
|
A user may want different pager settings or even a
different pager for various subcommands (e.g., because they
use different less settings for "log" vs "diff", or because
they have a pager that interprets only log output but not
other commands).
This patch extends the pager.<cmd> syntax to support not
only boolean to-page-or-not-to-page, but also to specify a
pager just for a specific command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new boolean "fetchRecurseSubmodules" config option controls the
behavior for "git fetch" and "git pull". It specifies if these commands
should recurse into submodules and fetch new commits there too and can be
set separately for each submodule.
In the .gitmodules file "submodule.<name>.fetchRecurseSubmodules" entries
are read before looking for them in .git/config. Thus settings found in
.git/config will override those from .gitmodules, thereby allowing the
user to ignore settings given by the remote side while also letting
upstream set reasonable defaults for those users who don't have special
needs.
This configuration can be overridden by the command line option
"--[no-]recurse-submodules" of "git fetch" and "git pull".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Michael J Gruber
Ramkumar Ramachandra
SZEDER Gábor
Joe Ratterman
Carlos Martín Nieto
Linus Torvalds
Jens Lehmann
Johan Herland
Martin von Zweigbergk
Ralf Wildenhues
Nguyễn Thái Ngọc Duy
Jiang Xin
Johannes Sixt
Jonathan Nieder
Aleksi Aalto
Jeff King