| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We stopped mentioning `tracking` is a deprecated but supported
synonym for `upstream` in pull.default even though we have no
intention of removing the support for it.
* jc/mention-tracking-for-pull-default:
doc: mention tracking for pull.default
|
|
Allow the server side to redact the refs/ namespace it shows to the
client.
Will merge to 'master'.
* jc/hidden-refs:
upload/receive-pack: allow hiding ref hierarchies
upload-pack: simplify request validation
upload-pack: share more code
|
|
A repository may have refs that are only used for its internal
bookkeeping purposes that should not be exposed to the others that
come over the network.
Teach upload-pack to omit some refs from its initial advertisement
by paying attention to the uploadpack.hiderefs multi-valued
configuration variable. Do the same to receive-pack via the
receive.hiderefs variable. As a convenient short-hand, allow using
transfer.hiderefs to set the value to both of these variables.
Any ref that is under the hierarchies listed on the value of these
variable is excluded from responses to requests made by "ls-remote",
"fetch", etc. (for upload-pack) and "push" (for receive-pack).
Because these hidden refs do not count as OUR_REF, an attempt to
fetch objects at the tip of them will be rejected, and because these
refs do not get advertised, "git push :" will not see local branches
that have the same name as them as "matching" ones to be sent.
An attempt to update/delete these hidden refs with an explicit
refspec, e.g. "git push origin :refs/hidden/22", is rejected. This
is not a new restriction. To the pusher, it would appear that there
is no such ref, so its push request will conclude with "Now that I
sent you all the data, it is time for you to update the refs. I saw
that the ref did not exist when I started pushing, and I want the
result to point at this commit". The receiving end will apply the
compare-and-swap rule to this request and rejects the push with
"Well, your update request conflicts with somebody else; I see there
is such a ref.", which is the right thing to do. Otherwise a push to
a hidden ref will always be "the last one wins", which is not a good
default.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update documentation to change "GIT" which was a poor-man's small
caps to "Git". The latter was the intended spelling.
Also change "git" spelled in all-lowercase to "Git" when it refers
to the system as the whole or the concept it embodies, as opposed to
the command the end users would type.
* ta/doc-no-small-caps:
Documentation: StGit is the right spelling, not StGIT
Documentation: describe the "repository" in repository-layout
Documentation: add a description for 'gitfile' to glossary
Documentation: do not use undefined terms git-dir and git-file
Documentation: the name of the system is 'Git', not 'git'
Documentation: avoid poor-man's small caps GIT
|
|
Improve error and advice messages given locally when "git push"
refuses when it cannot compute fast-forwardness by separating these
cases from the normal "not a fast-forward; merge first and push
again" case.
* jc/push-reject-reasons:
push: finishing touches to explain REJECT_ALREADY_EXISTS better
push: introduce REJECT_FETCH_FIRST and REJECT_NEEDS_FORCE
push: further simplify the logic to assign rejection reason
push: further clean up fields of "struct ref"
|
|
Allow a configuration variable core.commentchar to customize the
character used to comment out the hint lines in the edited text from
the default '#'.
* jc/custom-comment-char:
Allow custom "comment char"
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When looking at a configuration file edited long time ago, a user
may find 'pull.default = tracking' and wonder what it means, but
earlier we stopped mentioning this value, even though the code still
support it and more importantly, we have no intention to force old
timers to update their configuration files.
Instead of not mentioning it, add it to the description in a way
that makes it clear that users have no reason to add new uses of it
preferring over 'upstream', by not listing it as a separate item on
the same footing as other values but as a deprecated synonym of the
'upstream' in its description.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Specifically the fields uid, gid, ctime, ino and dev are set to zero
by JGit. Other implementations, eg. Git in cygwin are allegedly also
somewhat incompatible with Git For Windows and on *nix platforms
the resolution of the timestamps may differ.
Any stat checking by git will then need to check content, which may
be very slow, particularly on Windows. Since mtime and size
is typically enough we should allow the user to tell git to avoid
checking these fields if they are set to zero in the index.
This change introduces a core.checkstat config option where the
the user can select to check all fields (default), or just size
and the whole second part of mtime (minimal).
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a configuration variable to set default clean-up mode other
than "strip".
* rt/commit-cleanup-config:
commit: make default of "cleanup" option configurable
|
|
Teach commands in the "log" family to optionally pay attention to
the mailmap.
* ap/log-mailmap:
log --use-mailmap: optimize for cases without --author/--committer search
log: add log.mailmap configuration option
log: grep author/committer using mailmap
test: add test for --use-mailmap option
log: add --use-mailmap option
pretty: use mailmap to display username and email
mailmap: add mailmap structure to rev_info and pp
mailmap: simplify map_user() interface
mailmap: remove email copy and length limitation
Use split_ident_line to parse author and committer
string-list: allow case-insensitive string list
|
|
Add missing doc.
* ss/help-htmlpath-config-doc:
config.txt: Document help.htmlpath config parameter
|
|
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "log.mailmap" configuration variable to turn "--use-mailmap"
option on to "git log", "git show" and "git whatchanged".
The "--no-use-mailmap" option from the command line can countermand
the setting.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default of the "cleanup" option in "git commit"
is not configurable. Users who don't want to use the
default have to pass this option on every commit since
there's no way to configure it. This commit introduces
a new config option "commit.cleanup" which can be used
to change the default of the "cleanup" option in
"git commit".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach various forms of "format-patch" command line to identify what
branch the patches are taken from, so that the branch description
is picked up in more cases.
* nd/maint-branch-desc-doc:
format-patch: pick up branch description when no ref is specified
format-patch: pick up correct branch name from symbolic ref
t4014: a few more tests on cover letter using branch description
branch: delete branch description if it's empty
config.txt: a few lines about branch.<name>.description
|
|
The beginning of 'integrate with the tip of the remote branch, not
the commit recorded in the superproject gitlink' support.
* wk/submodule-update-remote:
submodule add: If --branch is given, record it in .gitmodules
submodule update: add --remote for submodule's upstream changes
submodule: add get_submodule_config helper funtion
|
|
Allow us to read, and default to read, mailmap files from the tip
of the history in bare repositories. This will help running tools
like shortlog in server settings.
* jk/mailmap-from-blob:
mailmap: default mailmap.blob in bare repositories
mailmap: fix some documentation loose-ends for mailmap.blob
mailmap: clean up read_mailmap error handling
mailmap: support reading mailmap from blobs
mailmap: refactor mailmap parsing for non-file sources
|
|
Require "-f" for push to update a tag, even if it is a fast-forward.
* cr/push-force-tag-update:
push: allow already-exists advice to be disabled
push: rename config variable for more general use
push: cleanup push rules comment
push: clarify rejection of update to non-commit-ish
push: require force for annotated tags
push: require force for refs under refs/tags/
push: flag updates that require force
push: keep track of "update" state separately
push: add advice for rejected tag reference
push: return reject reasons as a bitset
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current `update` command incorporates the superproject's gitlinked
SHA-1 ($sha1) into the submodule HEAD ($subsha1). Depending on the
options you use, it may checkout $sha1, rebase the $subsha1 onto
$sha1, or merge $sha1 into $subsha1. This helps you keep up with
changes in the upstream superproject.
However, it's also useful to stay up to date with changes in the
upstream subproject. Previous workflows for incorporating such
changes include the ungainly:
$ git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
With this patch, all of the useful functionality for incorporating
superproject changes can be reused to incorporate upstream subproject
updates. When you specify --remote, the target $sha1 is replaced with
a $sha1 of the submodule's origin/master tracking branch. If you want
to merge a different tracking branch, you can configure the
`submodule.<name>.branch` option in `.gitmodules`. You can override
the `.gitmodules` configuration setting for a particular superproject
by configuring the option in that superproject's default configuration
(using the usual configuration hierarchy, e.g. `.git/config`,
`~/.gitconfig`, etc.).
Previous use of submodule.<name>.branch
=======================================
Because we're adding a new configuration option, it's a good idea to
check if anyone else is already using the option. The foreach-pull
example above was described by Ævar in
commit f030c96d8643fa0a1a9b2bd9c2f36a77721fb61f
Author: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Date: Fri May 21 16:10:10 2010 +0000
git-submodule foreach: Add $toplevel variable
Gerrit uses the same interpretation for the setting, but because
Gerrit has direct access to the subproject repositories, it updates
the superproject repositories automatically when a subproject changes.
Gerrit also accepts the special value '.', which it expands into the
superproject's branch name.
Although the --remote functionality is using `submodule.<name>.branch`
slightly differently, the effect is the same. The foreach-pull
example uses the option to record the name of the local branch to
checkout before pulls. The tracking branch to be pulled is recorded
in `.git/modules/<name>/config`, which was initialized by the module
clone during `submodule add` or `submodule init`. Because the branch
name stored in `submodule.<name>.branch` was likely the same as the
branch name used during the initial `submodule add`, the same branch
will be pulled in each workflow.
Implementation details
======================
In order to ensure a current tracking branch state, `update --remote`
fetches the submodule's remote repository before calculating the
SHA-1. However, I didn't change the logic guarding the existing fetch:
if test -z "$nofetch"
then
# Run fetch only if $sha1 isn't present or it
# is not reachable from a ref.
(clear_local_git_env; cd "$path" &&
( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) &&
test -z "$rev") || git-fetch)) ||
die "$(eval_gettext "Unable to fetch in submodule path '\$path'")"
fi
There will not be a double-fetch, because the new $sha1 determined
after the `--remote` triggered fetch should always exist in the
repository. If it doesn't, it's because some racy process removed it
from the submodule's repository and we *should* be re-fetching.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The motivation for mailmap.blob is to let users of bare
repositories use the mailmap feature, as they would not have
a checkout containing the .mailmap file. We can make it even
easier for them by just looking in HEAD:.mailmap by default.
We can't know for sure that this is where they would keep a
mailmap, of course, but it is the best guess (and it matches
the non-bare behavior, which reads from HEAD:.mailmap in the
working tree). If it's missing, git will silently ignore the
setting.
We do not do the same magic in the non-bare case, because:
1. In the common case, HEAD:.mailmap will be the same as
the .mailmap in the working tree, which is a no-op.
2. In the uncommon case, the user has modified .mailmap
but not yet committed it, and would expect the working
tree version to take precedence.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a bare repository, there isn't a simple way to respect an
in-tree mailmap without extracting it to a temporary file.
This patch provides a config variable, similar to
mailmap.file, which reads the mailmap from a blob in the
repository.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mm/status-push-pull-advise:
document that statusHints affects git checkout
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add 'advice.pushAlreadyExists' option to disable the advice shown when
an update is rejected for a reference that is not allowed to update at
all (verses those that are allowed to fast-forward.)
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'pushNonFastForward' advice config can be used to squelch several
instances of push-related advice. Rename it to 'pushUpdateRejected' to
cover other reject scenarios that are unrelated to fast-forwarding.
Retain the old name for compatibility.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
19299a8 (Documentation: Move diff.<driver>.* from config.txt to
diff-config.txt, 2011-04-07) moved the diff configuration options to
diff-config.txt, but forgot about diff.wordRegex, which was left
behind in config.txt. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* pp/maint-doc-pager-config:
Documentation: improve the example of overriding LESS via core.pager
|
|
You can override an option set in the LESS variable by simply prefixing
the command line option with `-+`. This is more robust than the previous
example if the default LESS options are to ever change.
Signed-off-by: Patrick Palka <patrick@parcs.ath.cx>
Signed-off-by: Jeff King <peff@peff.net>
|
|
* maint:
t/perf: add "trash directory" to .gitignore
Add missing -z to git check-attr usage text for consistency with man page
git-jump: ignore (custom) prefix in diff mode
Documentation: indent-with-non-tab uses "equivalent tabs" not 8
completion: add --no-edit to git-commit
|
|
Update the documentation of the core.whitespace option
"indent-with-non-tab" to correctly reflect that it catches the use of
spaces instead of the equivalent tabs, rather than a fixed number.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"grep" learned to use a non-standard pattern type by default if a
configuration variable tells it to.
* js/grep-patterntype-config:
grep: add a grep.patternType configuration setting
|
|
The grep.extendedRegexp configuration setting enables the -E flag on grep
by default but there are no equivalents for the -G, -F and -P flags.
Rather than adding an additional setting for grep.fooRegexp for current
and future pattern matching options, add a grep.patternType setting that
can accept appropriate values for modifying the default grep pattern
matching behavior. The current values are "basic", "extended", "fixed",
"perl" and "default" for setting -G, -E, -F, -P and the default behavior
respectively.
When grep.patternType is set to a value other than "default", the
grep.extendedRegexp setting is ignored. The value of "default" restores
the current default behavior, including the grep.extendedRegexp
behavior.
Signed-off-by: J Smith <dark.panda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git am" failed, old timers knew to check .git/rebase-apply/patch
to see what went wrong, but we never told the users about it.
* pg/maint-1.7.9-am-where-is-patch:
am: indicate where a failed patch is to be found
|
|
When "git am" failed, old timers knew to check .git/rebase-apply/patch
to see what went wrong, but we never told the users about it.
* pg/maint-1.7.9-am-where-is-patch:
am: indicate where a failed patch is to be found
|
|
If "git am" fails to apply something, the end user may need to know
where to find the patch that failed to apply, so that the user can
do other things (e.g. trying "GNU patch" on it, running "diffstat"
to see what it tried to change, etc.) The input to "am" may have
contained more than one patch, or the message may have been MIME
encoded, and knowing what the user fed to "am" does not help very
much for this purpose.
Also introduce advice.amworkdir configuration to allow people who
learned where to look to squelch this message.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teaches git to normalize pathnames read from readdir(3) and all
arguments from the command line into precomposed UTF-8 (assuming
that they come as decomposed UTF-8) to work around issues on Mac OS.
I think there still are other places that need conversion
(e.g. paths that are read from stdin for some commands), but this
should be a good first step in the right direction.
* tb/sanitize-decomposed-utf-8-pathname:
git on Mac OS and precomposed unicode
|
|
Teach git to read various information from $XDG_CONFIG_HOME/git/ to allow
the user to avoid cluttering $HOME.
* mm/config-xdg:
config: write to $XDG_CONFIG_HOME/git/config file when appropriate
Let core.attributesfile default to $XDG_CONFIG_HOME/git/attributes
Let core.excludesfile default to $XDG_CONFIG_HOME/git/ignore
config: read (but not write) from $XDG_CONFIG_HOME/git/config file
|
|
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes two formatting bugs in the git-config documentation:
- in the column.ui entry don't indent the last paragraph so that it isn't
formatted as a literal paragraph
- in the push.default entry separate the last paragraph from the
nested list.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This gives the default value for the core.attributesfile variable
following the exact same logic of the previous change for the
core.excludesfile setting.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To use the feature of core.excludesfile, the user needs:
1. to create such a file,
2. and add configuration variable to point at it.
Instead, we can make this a one-step process by choosing a default value
which points to a filename in the user's $HOME, that is unlikely to
already exist on the system, and only use the presence of the file as a
cue that the user wants to use that feature.
And we use "${XDG_CONFIG_HOME:-$HOME/.config/git}/ignore" as such a
file, in the same directory as the newly added configuration file
("${XDG_CONFIG_HOME:-$HOME/.config/git}/config). The use of this
directory is in line with XDG specification as a location to store
such application specific files.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch provides new informative help messages in the display of
'git status' (at the top) during conflicts, rebase, am, bisect or
cherry-pick process.
The new messages are not shown when using options such as -s or
--porcelain. The messages about the current situation of the user are
always displayed but the advices on what the user needs to do in order
to resume a rebase/bisect/am/commit after resolving conflicts can be
hidden by setting advice.statushints to 'false' in the config file.
Thus, information about the updated advice.statushints key are added
in Documentation/config.txt.
Also, the test t7060-wt-status.sh is now working with the new help
messages. Tests about suggestions of "git rm" are also added.
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A couple of commands learn --column option to produce columnar output.
By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1)
* nd/columns:
tag: add --column
column: support piping stdout to external git-column process
status: add --column
branch: add --column
help: reuse print_columns() for help -a
column: add dense layout support
t9002: work around shells that are unable to set COLUMNS to 1
column: add columnar layout
Stop starting pager recursively
Add column layout skeleton and git-column
|
|
Since commit 6cf378f, asciidoc backticks are now inline
literals; therefore quoting {tilde} inside them is wrong
(this instance was missed in 6cf378f because it happened on
a parallel line of development).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our documentation was written for an ancient version of AsciiDoc,
making the source not very readable.
By Jeff King
* jk/doc-asciidoc-inline-literal:
docs: stop using asciidoc no-inline-literal
|
|
New users tend to work on one branch at a time and push the result
out. The current and upstream modes of push is a more suitable default
mode than matching mode for these people, but neither is surprise-free
depending on how the project is set up. Introduce a "simple" mode that
is a subset of "upstream" but only works when the branch is named the same
between the remote and local repositories.
The plan is to make it the new default when push.default is not
configured.
By Matthieu Moy (5) and others
* mm/simple-push:
push.default doc: explain simple after upstream
push: document the future default change for push.default (matching -> simple)
t5570: use explicit push refspec
push: introduce new push.default mode "simple"
t5528-push-default.sh: add helper functions
Undocument deprecated alias 'push.default=tracking'
Documentation: explain push.default option a bit more
|
Junio C Hamano
Thomas Ackermann
Robin Rosenberg
Sebastian Staudt
Antoine Pelisse
Ralf Thielow
Nguyễn Thái Ngọc Duy
W. Trevor King
Jeff King
Matthieu Moy
Chris Rorvick
Ramkumar Ramachandra
Patrick Palka
Wesley J. Landaker
J Smith
Paul Gortmaker
Torsten Bögershausen
Andreas Schwab
Huynh Khoi Nguyen Nguyen
Lucien Kong