| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A new extension to the index file has been introduced, which allows
the file to be read in parallel.
* bp/read-cache-parallel:
read-cache: load cache entries on worker threads
ieot: add Index Entry Offset Table (IEOT) extension
read-cache: load cache extensions on a worker thread
config: add new index.threads config setting
eoie: add End of Index Entry (EOIE) extension
read-cache: clean up casting and byte decoding
read-cache.c: optimize reading index format v4
|
|
Doc update.
* nd/packobjectshook-doc-fix:
config.txt: correct the note about uploadpack.packObjectsHook
|
|
"gc --auto" ended up calling exit(-1) upon error, which has been
corrected to use exit(1). Also the error reporting behaviour when
daemonized has been updated to exit with zero status when stopping
due to a previously discovered error (which implies there is no
point running gc to improve the situation); we used to exit with
failure in such a case.
* jn/gc-auto:
gc: do not return error for prior errors in daemonized mode
|
|
Doc update.
* ma/config-doc-update:
git-config.txt: fix 'see: above' note
Doc: use `--type=bool` instead of `--bool`
|
|
Add support for a new index.threads config setting which will be used to
control the threading code in do_read_index(). A value of 0 will tell the
index code to automatically determine the correct number of threads to use.
A value of 1 will make the code single threaded. A value greater than 1
will set the maximum number of threads to use.
For testing purposes, this setting can be overwritten by setting the
GIT_TEST_INDEX_THREADS=<n> environment variable to a value greater than 0.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update fsck.skipList implementation and documentation.
* ab/fsck-skiplist:
fsck: support comments & empty lines in skipList
fsck: use oidset instead of oid_array for skipList
fsck: use strbuf_getline() to read skiplist file
fsck: add a performance test for skipList
fsck: add a performance test
fsck: document that skipList input must be unabbreviated
fsck: document and test commented & empty line skipList input
fsck: document and test sorted skipList input
fsck tests: add a test for no skipList input
fsck tests: setup of bogus commit object
|
|
Split Documentation/config.txt for easier maintenance.
* nd/config-split:
config.txt: move submodule part out to a separate file
config.txt: move sequence.editor out of "core" part
config.txt: move sendemail part out to a separate file
config.txt: move receive part out to a separate file
config.txt: move push part out to a separate file
config.txt: move pull part out to a separate file
config.txt: move gui part out to a separate file
config.txt: move gitcvs part out to a separate file
config.txt: move format part out to a separate file
config.txt: move fetch part out to a separate file
config.txt: follow camelCase naming
|
|
Document for uploadpack.packObjectsHook is added in [1] and consists
of two paragraphs, the second one is quite important about where this
variable can stay.
When the paragraph about uploadpack.allowFilter is added in [2], it's
added in between the two paragraphs. This makes the "this is non-repo
level config" note incorrectly apply to allowFilter instead of
packObjectsHook. Move allowFilter paragraph down to fix this.
[1] 20b20a22f8 (upload-pack: provide a hook for running pack-objects -
2016-05-18)
[2] 10ac85c785 (upload-pack: add object filtering for partial clone -
2017-12-08)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc fix.
* bw/protocol-v2:
config: document value 2 for protocol.version
|
|
"git checkout -b newbranch [HEAD]" should not have to do as much as
checking out a commit different from HEAD. An attempt is made to
optimize this special case.
* bp/checkout-new-branch-optim:
config doc: add missing list separator for checkout.optimizeNewBranch
|
|
After fb0dc3bac1 (builtin/config.c: support `--type=<type>` as preferred
alias for `--<type>`, 2018-04-18) we have a more modern way of spelling
`--bool`.
Update all instances except those that explicitly document the
"historical options" in git-config.txt. The other old-style
type-specifiers already seem to be gone except for in that list of
historical options.
Tweak the grammar a little in config.txt while we are there.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation added in fa655d8411 ("checkout: optimize "git
checkout -b <new_branch>"", 2018-08-16) didn't add the double-colon
needed for the labeled list separator, as a result the added
documentation all got squashed into one paragraph. Fix that by adding
the list separator.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Lift code from GitHub to restrict delta computation so that an
object that exists in one fork is not made into a delta against
another object that does not appear in the same forked repository.
* cc/delta-islands:
pack-objects: move 'layer' into 'struct packing_data'
pack-objects: move tree_depth into 'struct packing_data'
t5320: tests for delta islands
repack: add delta-islands support
pack-objects: add delta-islands support
pack-objects: refactor code into compute_layer_order()
Add delta-islands.{c,h}
|
|
When there are too many packfiles in a repository (which is not
recommended), looking up an object in these would require
consulting many pack .idx files; a new mechanism to have a single
file that consolidates all of these .idx files is introduced.
* ds/multi-pack-index: (32 commits)
pack-objects: consider packs in multi-pack-index
midx: test a few commands that use get_all_packs
treewide: use get_all_packs
packfile: add all_packs list
midx: fix bug that skips midx with alternates
midx: stop reporting garbage
midx: mark bad packed objects
multi-pack-index: store local property
multi-pack-index: provide more helpful usage info
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
...
|
|
"git checkout -b newbranch [HEAD]" should not have to do as much as
checking out a commit different from HEAD. An attempt is made to
optimize this special case.
* bp/checkout-new-branch-optim:
checkout: optimize "git checkout -b <new_branch>"
|
|
It's annoying not to be able to put comments and empty lines in the
skipList, when e.g. keeping a big central list of commits to skip in
/etc/gitconfig, which was my motivation for 1362df0d41 ("fetch:
implement fetch.fsck.*", 2018-07-27).
Implement that, and document what version of Git this was changed in,
since this on-disk format can be expected to be used by multiple
versions of git.
There is no notable performance impact from this change, using the
test setup described a couple of commits back:
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
1450.3: fsck with 0 skipped bad commits 7.69(7.27+0.42) 7.86(7.48+0.37) +2.2%
1450.5: fsck with 1 skipped bad commits 7.69(7.30+0.38) 7.83(7.47+0.36) +1.8%
1450.7: fsck with 10 skipped bad commits 7.76(7.38+0.38) 7.79(7.38+0.41) +0.4%
1450.9: fsck with 100 skipped bad commits 7.76(7.38+0.38) 7.74(7.36+0.38) -0.3%
1450.11: fsck with 1000 skipped bad commits 7.71(7.30+0.41) 7.72(7.34+0.38) +0.1%
1450.13: fsck with 10000 skipped bad commits 7.74(7.34+0.40) 7.72(7.34+0.38) -0.3%
1450.15: fsck with 100000 skipped bad commits 7.75(7.40+0.35) 7.70(7.29+0.40) -0.6%
1450.17: fsck with 1000000 skipped bad commits 7.12(6.86+0.26) 7.13(6.87+0.26) +0.1%
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the implementation of the skipList feature to use oidset
instead of oid_array to store SHA-1s for later lookup.
This list is parsed once on startup by fsck, fetch-pack or
receive-pack depending on the *.skipList config in use. I.e. only once
per invocation, but note that for "clone --recurse-submodules" each
submodule will re-parse the list, in addition to the main project, and
it will be re-parsed when checking .gitmodules blobs, see
fb16287719 ("fsck: check skiplist for object in fsck_blob()",
2018-06-27).
Memory usage is a bit higher, but we don't need to keep track of the
sort order anymore. Embed the oidset into struct fsck_options to make
its ownership clear (no hidden sharing) and avoid unnecessary pointer
indirection.
The cumulative impact on performance of this & the preceding change,
using the test setup described in the previous commit:
Test HEAD~2 HEAD~ HEAD
----------------------------------------------------------------------------------------------------------------
1450.3: fsck with 0 skipped bad commits 7.70(7.31+0.38) 7.72(7.33+0.38) +0.3% 7.70(7.30+0.40) +0.0%
1450.5: fsck with 1 skipped bad commits 7.84(7.47+0.37) 7.69(7.32+0.36) -1.9% 7.71(7.29+0.41) -1.7%
1450.7: fsck with 10 skipped bad commits 7.81(7.40+0.40) 7.94(7.57+0.36) +1.7% 7.92(7.55+0.37) +1.4%
1450.9: fsck with 100 skipped bad commits 7.81(7.42+0.38) 7.95(7.53+0.41) +1.8% 7.83(7.42+0.41) +0.3%
1450.11: fsck with 1000 skipped bad commits 7.99(7.62+0.36) 7.90(7.50+0.40) -1.1% 7.86(7.49+0.37) -1.6%
1450.13: fsck with 10000 skipped bad commits 7.98(7.57+0.40) 7.94(7.53+0.40) -0.5% 7.90(7.45+0.44) -1.0%
1450.15: fsck with 100000 skipped bad commits 7.97(7.57+0.39) 8.03(7.67+0.36) +0.8% 7.84(7.43+0.41) -1.6%
1450.17: fsck with 1000000 skipped bad commits 7.72(7.22+0.50) 7.28(7.07+0.20) -5.7% 7.13(6.87+0.25) -7.6%
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Abbreviating the SHA-1s in the skipList input has never worked, but
the documentation hasn't unambiguously stated that this is an error,
and there was no test for it.
Let's fix both since it would be easy for some later refactoring
e.g. switch to accidentally switch to a looser OID parsing function,
causing the tests before this change to pass, but for older versions
of git to be incompatible with the new skipList format.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is currently no comment syntax for the fsck.skipList, this isn't
really by design, and it would be nice to have support for comments.
Document that this doesn't work, and test for how this errors
out. These tests reveal a current bug, if there's invalid input the
output will emit some of the next line, and then go into uninitialized
memory. This is fixed in a subsequent change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since the skipList support was first added in cd94c6f91 ("fsck:
git receive-pack: support excluding objects from fsck'ing",
2015-06-22) the documentation for the format has that the file is a
sorted list of object names.
Thus, anyone using the feature would have thought the list needed to
be sorted. E.g. I recently in conjunction with my fetch.fsck.*
implementation in 1362df0d41 ("fetch: implement fetch.fsck.*",
2018-07-27) wrote some code to ship a skipList, and went out of my way
to sort it.
Doing so seems intuitive, since it contains fixed-width records, and
has no support for comments, so one might expect it to be binary
searched in-place on-disk.
However, as documented here this was never a requirement, so let's
change the documentation. Since this is a file format change let's
also document what was said about this in the past, so e.g. someone
like myself reading the new docs can see this never needed to be
sorted ("why do I have all this code to sort this thing...").
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the config documentation to note the value `2` as an acceptable
value for the protocol.version config.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Finishing touches to doc.
* ds/commit-graph-fsck:
config: fix commit-graph related config docs
|
|
"git help --config" (which is used in command line completion)
missed the configuration variables not described in the main
config.txt file but are described in another file that is included
by it, which has been corrected.
* nd/complete-config-vars:
generate-cmdlist.sh: collect config from all config.txt files
|
|
"git branch --list" learned to take the default sort order from the
'branch.sort' configuration variable, just like "git tag --list"
pays attention to 'tag.sort'.
* sm/branch-sort-config:
branch: support configuring --sort via .gitconfig
|
|
The meaning of the possible values the "core.checkStat"
configuration variable can take were not adequately documented,
which has been fixed.
* nd/config-core-checkstat-doc:
config.txt: clarify core.checkStat
|
|
The core.commitGraph config setting was accidentally removed from
the config documentation. In that same patch, the config setting
that writes a commit-graph during garbage collection was incorrectly
written to the doc as "gc.commitGraph" instead of "gc.writeCommitGraph".
Reported-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This script uses Documentation/config.txt as input for "git help
--config" and "git config" completion but it misses the fact that
config.txt includes other txt files. Include all *config.txt as input
when scanning for config keys. This could produce false positives, but
as long as we stick to the blah-config.txt naming convention, we
should be ok.
While at there, move diff.* from config.txt to diff-config.txt where
all other diff config keys are.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ds/multi-pack-index: (23 commits)
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
midx: sort and deduplicate objects from packfiles
midx: read pack names into array
multi-pack-index: write pack names in chunk
multi-pack-index: read packfile list
packfile: generalize pack directory list
t5319: expand test data
multi-pack-index: load into memory
midx: write header information to lockfile
multi-pack-index: add 'write' verb
...
|
|
The sideband code learned to optionally paint selected keywords at
the beginning of incoming lines on the receiving end.
* hn/highlight-sideband-keywords:
sideband: do not read beyond the end of input
sideband: highlight keywords in remote sideband output
|
|
"git tbdiff" that lets us compare individual patches in two
iterations of a topic has been rewritten and made into a built-in
command.
* js/range-diff: (21 commits)
range-diff: use dim/bold cues to improve dual color mode
range-diff: make --dual-color the default mode
range-diff: left-pad patch numbers
completion: support `git range-diff`
range-diff: populate the man page
range-diff --dual-color: skip white-space warnings
range-diff: offer to dual-color the diffs
diff: add an internal option to dual-color diffs of diffs
color: add the meta color GIT_COLOR_REVERSE
range-diff: use color for the commit pairs
range-diff: add tests
range-diff: do not show "function names" in hunk headers
range-diff: adjust the output of the commit pairs
range-diff: suppress the diff headers
range-diff: indent the diffs just like tbdiff
range-diff: right-trim commit messages
range-diff: also show the diff between patches
range-diff: improve the order of the shown commits
range-diff: first rudimentary implementation
Introduce `range-diff` to compare iterations of a topic branch
...
|
|
Doc fix.
* nd/config-blame-sort:
config.txt: reorder blame stuff to keep config keys sorted
|
|
Update to a few other topics around 'git fetch'.
* ab/fetch-nego:
fetch doc: cross-link two new negotiation options
negotiator: unknown fetch.negotiationAlgorithm should error out
|
|
The test performed at the receiving end of "git push" to prevent
bad objects from entering repository can be customized via
receive.fsck.* configuration variables; we now have gained a
counterpart to do the same on the "git fetch" side, with
fetch.fsck.* configuration variables.
* ab/fsck-transfer-updates:
fsck: test and document unknown fsck.<msg-id> values
fsck: add stress tests for fsck.skipList
fsck: test & document {fetch,receive}.fsck.* config fallback
fetch: implement fetch.fsck.*
transfer.fsckObjects tests: untangle confusing setup
config doc: elaborate on fetch.fsckObjects security
config doc: elaborate on what transfer.fsckObjects does
config doc: unify the description of fsck.* and receive.fsck.*
config doc: don't describe *.fetchObjects twice
receive.fsck.<msg-id> tests: remove dead code
|
|
The description of this key does not really tell what the 'minimal'
mode checks and does not check. The description for the 'default'
mode is not much better and just says 'all fields', which is unclear
and is not even correct (e.g. we do not look at 'atime').
Spell out what are and what are not checked under the 'minimal' mode
relative to the 'default' mode to help those who want to decide if
they want to use the 'minimal' mode, also taking information about
this mode from the commit message of c08e4d5b5c (Enable minimal stat
checking - 2013-01-22).
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Skip merging the commit, updating the index and working directory if and
only if we are creating a new branch via "git checkout -b <new_branch>."
Any other checkout options will still go through the former code path.
If sparse_checkout is on, require the user to manually opt in to this
optimzed behavior by setting the config setting checkout.optimizeNewBranch
to true as we will no longer update the skip-worktree bit in the index, nor
add/remove files in the working directory to reflect the current sparse
checkout settings.
For comparison, running "git checkout -b <new_branch>" on a large repo takes:
14.6 seconds - without this patch
0.3 seconds - with this patch
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add support for configuring default sort ordering for git branches. Command
line option will override this configured value, using the exact same
syntax.
Signed-off-by: Samuel Maftoul <samuel.maftoul@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement simple support for --delta-islands option and
repack.useDeltaIslands config variable in git repack.
This allows users to setup delta islands in their config and
get the benefit of less disk usage while cloning and fetching
is still quite fast and not much more CPU intensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement support for delta islands in git pack-objects
and document how delta islands work in
"Documentation/git-pack-objects.txt" and Documentation/config.txt.
This allows users to setup delta islands in their config and
get the benefit of less disk usage while cloning and fetching
is still quite fast and not much more CPU intensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "git tag -s" etc. a few configuration variables (gpg.format
that can be set to "openpgp" or "x509", and gpg.<format>.program
that is used to specify what program to use to deal with the format)
to allow x.509 certs with CMS via "gpgsm" to be used instead of
openpgp via "gnupg".
* hs/gpgsm:
gpg-interface t: extend the existing GPG tests with GPGSM
gpg-interface: introduce new signature format "x509" using gpgsm
gpg-interface: introduce new config to select per gpg format program
gpg-interface: do not hardcode the key string len anymore
gpg-interface: introduce an abstraction for multiple gpg formats
t/t7510: check the validation of the new config gpg.format
gpg-interface: add new config to select how to sign a commit
|
Junio C Hamano
Ben Peart
Nguyễn Thái Ngọc Duy
Martin Ågren
Ævar Arnfjörð Bjarmason
René Scharfe
Brandon Williams
Derrick Stolee
Ben Peart
Samuel Maftoul
Jeff King