| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch introduces a make target "quick-install-html" which installs
the html documentation from the branch origin/html, without the need for
asciidoc/xmlto. This is analogous to the existing "quick-install-doc"
target for the man pages.
We advertise these targets in the INSTALL file now.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch renames the following documents and at the same time converts
them to the man format:
diffcore.txt -> gitdiffcore.txt (man section 7)
repository-layout.txt -> gitrepository-layout.txt (man section 5)
Other documents that reference the above ones are changed accordingly.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch renames the following documents and at the same time converts
them to the man format:
core-tutorial.txt -> gitcore-tutorial.txt
glossary.txt -> gitglossary.txt
But as the glossary is included in the user manual and as the new
gitglossary man page cannot be included as a whole in the user manual,
the actual glossary content is now in its own "glossary-content.txt"
new file. And this file is included by both the user manual and the
gitglossary man page.
Other documents that reference the above ones are changed accordingly
and sometimes improved a little too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch renames the following documents and at the same time converts
them to the man page format:
cvs-migration.txt -> gitcvs-migration.txt
tutorial.txt -> gittutorial.txt
tutorial-2.txt -> gittutorial-2.txt
These new man pages are put in section 7, and other documents that reference
the above ones are change accordingly.
[jc: with help from Nanako to clean things up]
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also now "gitcli(5)" becomes "gitcli(7)".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Jakub Narebski <jnareb@gmail.com> wrote Sun, Feb 03, 2008:
> Junio C Hamano wrote:
> > Jakub Narebski <jnareb@gmail.com> writes:
> >
> > [From] http://thread.gmane.org/gmane.comp.version-control.git/53457/focus=53458
> Julian Phillips:
> > Are you using docbook xsl 1.72? There are known problems building the
> > manpages with that version. 1.71 works, and 1.73 should work when it get
> > released.
I was able to solve this problem with this patch, which adds a XSL file
used specifically for DOCBOOK_XSL_172=YesPlease and where dots and
backslashes are escaped properly so they won't be substituted to the
wrong thing further down the "DocBook XSL pipeline". Doing the escaping
in the existing callout.xsl breaks v1.70.1. Hopefully v1.73 will end
this part of the manpage nightmare.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This page should hold every information about the git ways to parse command
lines, and best practices to be used for scripting.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
|
|
Most of them are still stubs, but the procedure to build the HTML
documentation, maintaining the index and installing the end product are
there.
I placed names of people who are likely to know the most about the topic
in the stub files, so that volunteers will know whom to ask questions as
needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is to primarily pull in MANPATH tweak and help.txt formatting fix
from the master branch.
|
|
Now when using "git help -w cmd", we will try to show the HTML man
page "git-cmd.html" in your prefered web browser.
To do that "help.c" code will call a new shell script
"git-browse-help".
This currently works only if the HTML versions of the man page
have been installed in $(htmldir) (typically "/usr/share/doc/git-doc"),
so new target to do that is added to "Documentation/Makefile".
The browser to use can be configured using the "web.browser"
config variable.
We try to open a new tab in an existing web browser, if possible.
The code in "git-browse-help" is heavily stolen from "git-mergetool"
by Theodore Y. Ts'o. Thanks.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Makefile uses $(PERL_PATH) but Documentation/Makefile uses "perl"; that
means the two Makefiles can use two different Perl installations.
Teach Documentation/Makefile to use PERL_PATH that is exported from the
toplevel Makefile, and give a sane fallback for people who run "make"
from Documentation directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The install-sh script as shipped with automake requires a space between
the -m switch and its argument. Since this is also the regular way of
doing it with other install implementations this change inserts the
missing space in all makefiles.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The categorized list of commands in git(7) and the list of common
commands in "git help" output were maintained separately, which was
insane. This consolidates them to a single command-list.txt file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
From version 1.72 it will replace all dots in roff requests with U+2302
("house" character), and add escaping in output for all instances of dot
that are not in roff requests. This caused the ".ft" hack forcing
monospace font in listingblocks to end up as "\&.ft" and being visible
in the resulting man page.
The fix adds a DOCBOOK_XSL_172 build variable that will disable the
hack. To allow this variable to be defined in config.mak it also moves
build variable handling below the inclusion of config.mak.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "Discussion" section has a lot of useful information, but is a
little wordy, especially for an already-long man page, and is designed
for an audience more of potential git hackers than users, which probably
doesn't make as much sense as git matures. Also, I (perhaps foolishly)
forked a version in the user manual, which has been significantly
rewritten in an attempt to address some of the above problems.
So, remove this section and replace it by a (very terse) summary of the
original material--my attempt at the World's Shortest Git Overview--and
a reference to the appropriate chapter of the user manual. It's
unfortunate to remove something that's been in this place for a long
time, as some people may still depend on finding it there. But I think
we'll want to do this some day anyway.
Cc: Andreas Ericsson <ae@op5.se>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
If cmd-list.made has been created by a previous run as root, output
redirection to it will fail. So remove it before regeneration.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These patches use docbook2x in order to create an info version of the
git user manual. No existing Makefile targets (including "all") are
touched, so you need to explicitly say
make info
sudo make install-info
to get git.info created and installed. If the info target directory
does not already contain a "dir" file, no directory entry is created.
This facilitates $(DESTDIR)-based installations. The same could be
achieved with
sudo make INSTALL_INFO=: install-info
explicitly.
perl is used for patching up sub-par file and directory information in
the Texinfo file. It would be cleaner to place the respective info
straight into user-manual.txt or the conversion configurations, but I
find myself unable to find out how to do this with Asciidoc/Texinfo.
Signed-off-by: David Kastrup <dak@gnu.org>
|
|
This makes "make doc" work even if you made "sudo make doc" previously
by mistake. Apparently an oversight: the other targets did this already.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There have been several complaints against k.org's user-manual
page. The document is generated in ISO-8859-1 by the xsltproc
toolchain (I suspect this is because released docbook.xsl we use
has xsl:output element that says the output is ISO-8859-1) but
server delivers it with "charset=UTF-8", and all h*ll breaks
loose.
This attempts to force UTF-8 on the generating end.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to FHS,
http://www.pathname.com/fhs/pub/fhs-2.3.html#USRSHAREMANMANUALPAGES
default man page path is $prefix/share/man.
Signed-off-by: Ismail Donmez <ismail@pardus.org.tr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* lh/submodule:
gitmodules(5): remove leading period from synopsis
Add gitmodules(5)
git-submodule: give submodules proper names
Rename sections from "module" to "submodule" in .gitmodules
git-submodule: remember to checkout after clone
t7400: barf if git-submodule removes or replaces a file
|
|
It turns out that the attribute definition we have had for a
long time to hide "^" character from AsciiDoc 7 was not honored
by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is
a similar breakage with the "compatible" mode with + characters.
The double colon at the end of definition list term needs
to be attached to the term, without a whitespace. After this
minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with
compatibility mode seems to produce reasonably good results.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds documentation for the .gitmodules file.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Only git-ls-files(1) describes the gitignore format in detail, and it does so
with reference to git-ls-files options. Most users don't use the plumbing
command git-ls-files directly, and shouldn't have to look in its manpage for
information on the gitignore format.
Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor
out the gitignore documentation into that file, changing it to refer to
.gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference
gitignore(5) from other relevant manpages and documentation. Remove
now-redundant information on exclude patterns from git-ls-files(1), leaving
only information on how git-ls-files options specify exclude patterns and what
precedence they have.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Instead of using sed on the resulting file, we now have a
git_version asciidoc attribute. This means that we don't
pipe the output of asciidoc, which means we can detect build
failures.
Problem reported by Scott Lamb, solution suggested by Jonas Fonseca.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
Documentation: tighten dependency for git.{html,txt}
Makefile: iconv() on Darwin has the old interface
t5300-pack-object.sh: portability issue using /usr/bin/stat
t3200-branch.sh: small language nit
usermanual.txt: some capitalization nits
Make builtin-branch.c handle the git config file
rename_ref(): only print a warning when config-file update fails
Distinguish branches by more than case in tests.
Avoid composing too long "References" header.
cvsimport: Improve formating consistency
cvsimport: Reorder options in documentation for better understanding
cvsimport: Improve usage error reporting
cvsimport: Improve documentation of CVSROOT and CVS module determination
cvsimport: sync usage lines with existing options
Conflicts:
Documentation/Makefile
|
|
Every time _any_ documentation page changed, cmds-*.txt files
were regenerated, which caused git.{html,txt} to be remade. Try
not to update cmds-*.txt files if their new contents match the
old ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Include GIT-VERSION-FILE and replace @@GIT_VERSION@@ in
the HTML and XML asciidoc output. The documentation
doesn't depend on GIT-VERSION-FILE so it will not be
automatically rebuild if nothing else changed.
[jc: fixing the case for interrupted build]
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The sort_glossary.pl script sorts the glossary, checks for duplicates,
and automatically adds cross-references.
But it's not so hard to do all that by hand, and sometimes the automatic
cross-references are a little wrong; so let's run the script one last
time and check in its output.
Note: to make the output fit better into the user manual I also deleted
the acknowledgements at the end, which was maybe a little rude; feel
free to object and I can find a different solution.
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
|
|
The --nonet option prevents xsltproc from going to the network to find
anything. But it always tries to find them locally first, so for a
user with the necessary docbook stylesheets installed the build will
work just fine without xsltproc attempting to use the network; all
--nonet does is make it fail rather than falling back on that. That
doesn't seem particularly helpful.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
|
|
The generated user manual is rather hard to read thanks to the lack of
the css that's supposed to be included from docbook-xsl.css.
I'm totally ignorant of the toolchain; grubbing through xmlto and
related scripts, the easiest way I could find to ensure that the
generated html links to the stylesheet is by calling xsltproc directly.
Maybe there's some better way.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
config.mak.autogen is already there. Without this change it is not
possible to override mandir in config.mak.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This also adds a hook in the Makefile I can use to automatically
include pointers to documentation for older releases when updating
the pages at http://kernel.org/pub/software/scm/git/docs/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Allow setting the path of asciidoc in only one place when creating
the documentation.
Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It does not seem to need it either and gives an error on FC5 I use
at kernel.org to cut documentation tarballs, so remove it in the
meantime.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is in the hope of giving JBF's user-manual wider exposure.
I am not very happy with trailing whitespaces in the new
document, but let's not worry too much about the formatting
issues for now, but concentrate more on the structure and the
contents.
|
|
This adds two new classes (pure-helpers and "Interacting with
Others") to the command list in the main manual page. The
latter class is primarily about foreign SCM interface and is
placed before low-level (plumbing) commands.
Also it promotes a handful commands to mainporcelain category
while demoting some others.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Pointed out by Santi.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This moves the source of the list of commands and categorization
to the end of Documentation/cmd-list.perl, so that re-categorization
and re-ordering would become easier to manage.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Current README content is way too esoteric for someone looking at GIT
for the first time. Instead it should provide a quick summary of what
GIT is with a few pointers to other resources.
The bulk of the previous README content is moved to
Documentation/core-intro.txt.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Michael J Gruber
Christian Couder
Jonas Fonseca
Miklos Vajna
Junio C Hamano
Mark Levedahl
Pierre Habouzit
Robert Schiele
J. Bruce Fields
David Kastrup
Emil Medve
Ismail Dönmez
Lars Hjemli
Josh Triplett
Jeff King
Junio C Hamano
Frank Lichtenheld
Uwe Kleine-König
Dotan Barak
Nicolas Pitre