| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Hotfix for a topic recently merged to 'master'.
* ab/fix-make-lint-docs:
Documentation/Makefile: fix lint-docs mkdir dependency
|
|
Since 8650c6298c (doc lint: make "lint-docs" non-.PHONY, 2021-10-15), we
put the output for gitlink linter into .build/lint-docs/gitlink. There
are order-only dependencies to create the sequence of subdirs like:
.build/lint-docs: | .build
$(QUIET)mkdir $@
.build/lint-docs/gitlink: | .build/lint-docs
$(QUIET)mkdir $@
where each level has to depend on the prior one (since the parent
directory must exist for us to create something inside it). But the
"howto" and "config" subdirectories of gitlink have the wrong
dependency; they depend on "lint-docs", not "lint-docs/gitlink".
This usually works out, because the LINT_DOCS_GITLINK targets which
depend on "gitlink/howto" also depend on just "gitlink", so the
directory gets created anyway. But since we haven't given make an
explicit ordering, things can racily happen out of order.
If you stick a "sleep 1" in the rule to build "gitlink" like this:
## Lint: gitlink
.build/lint-docs/gitlink: | .build/lint-docs
- $(QUIET)mkdir $@
+ $(QUIET)sleep 1 && mkdir $@
then "make clean; make lint-docs" will fail reliably. Or you can see it
as-is just by building the directory in isolation:
$ make clean
[...]
$ make .build/lint-docs/gitlink/howto
GEN mergetools-list.made
GEN cmd-list.made
GEN doc.dep
SUBDIR ../
make[1]: 'GIT-VERSION-FILE' is up to date.
SUBDIR ../
make[1]: 'GIT-VERSION-FILE' is up to date.
mkdir: cannot create directory ‘.build/lint-docs/gitlink/howto’: No such file or directory
make: *** [Makefile:476: .build/lint-docs/gitlink/howto] Error 1
The fix is easy: we just need to depend on the correct parent directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Build fix.
* ab/fix-make-lint-docs:
doc lint: make "lint-docs" non-.PHONY
doc build: speed up "make lint-docs"
doc lint: emit errors on STDERR
doc lint: fix error-hiding regression
|
|
Doc update.
* tz/doc-link-to-bundle-format-fix:
doc: add bundle-format to TECH_DOCS
|
|
Speed up the "lint-docs" target by making it non-.PHONY. Similar to my
c234e8a0ecf (Makefile: make the "sparse" target non-.PHONY,
2021-09-23). We'll now create empty files corresponding to a
dependency graph for each of these lint scripts.
This speeds things up a bit[1], and makes the output correspond to any
in-tree changes we have:
$ touch git-add.txt; make lint-docs; make lint-docs
GEN cmd-list.made
GEN doc.dep
LINT GITLINK git-add.txt
LINT MAN END git-add.txt
LINT MAN SEC git-add.txt
make: Nothing to be done for 'lint-docs'.
As with the "sparse" target changes this has a hard dependency on the
use of ".DELETE_ON_ERROR" in the Makefile, added here in
db10fc6c09f (doc: simplify Makefile using .DELETE_ON_ERROR,
2021-05-21). This method also depends on the output for us emitting
any errors on STDERR (fixed in a preceding commit), as well us these
scripts exiting with non-zero on any errors (which they were already
doing).
1.
$ git show HEAD~:Documentation/Makefile >Makefile.old
$ hyperfine --warmup 2 -L f ",.old" 'make -j1 -f Makefile{f} lint-docs'
Benchmark #1: make -j1 -f Makefile lint-docs
Time (mean ± σ): 60.8 ms ± 1.4 ms [User: 58.7 ms, System: 2.5 ms]
Range (min … max): 58.9 ms … 64.0 ms 48 runs
Benchmark #2: make -j1 -f Makefile.old lint-docs
Time (mean ± σ): 84.0 ms ± 1.5 ms [User: 78.6 ms, System: 5.7 ms]
Range (min … max): 81.8 ms … 87.8 ms 35 runs
Summary
'make -j1 -f Makefile lint-docs' ran
1.38 ± 0.04 times faster than 'make -j1 -f Makefile.old lint-docs'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the trick we use to speed up the "clean" target to also extend
to the "lint-docs" target. See 54df87555b1 (Documentation/Makefile:
conditionally include doc.dep, 2020-12-08) for the "clean"
implementation.
The "doc-lint" target only depends on *.txt files, so we don't need to
generate GIT-VERSION-FILE etc. if that's all we're doing. This makes
the "make lint-docs" target more than 2x as fast:
$ git show HEAD~:Documentation/Makefile >Makefile.old
$ hyperfine -L f ",.old" 'make -f Makefile{f} lint-docs'
Benchmark #1: make -f Makefile lint-docs
Time (mean ± σ): 100.2 ms ± 1.3 ms [User: 93.7 ms, System: 6.7 ms]
Range (min … max): 98.4 ms … 103.1 ms 29 runs
Benchmark #2: make -f Makefile.old lint-docs
Time (mean ± σ): 220.0 ms ± 20.0 ms [User: 206.0 ms, System: 18.0 ms]
Range (min … max): 206.6 ms … 267.5 ms 11 runs
Summary
'make -f Makefile lint-docs' ran
2.19 ± 0.20 times faster than 'make -f Makefile.old lint-docs'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the broken "make lint-docs" (or "make check-docs" at the
top-level) target, which has been broken since my cafd9828e89 (doc
lint: lint and fix missing "GIT" end sections, 2021-04-09).
The CI for "seen" is emitting an error about a broken gitlink, but due
to there being 3x scripts chained via ";" instead of "&&" we're not
carrying forward the non-zero exit code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A link to the bundle-format was added in 5c8273d57c (bundle doc: rewrite
the "DESCRIPTION" section, 2021-07-31).
Ensure `technical/bundle-format.html` is created to avoid a broken link
in `git-bundle.html`.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
That's what we have $(RM) for.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently GNU make already removes files when catching an interruption
signal, however, in order to deal with other kinds of errors a
workaround is in place to store target output to a temporary file, and
only move it to its right place on success.
By enabling the built-in .DELETE_ON_ERROR we let make do this task, so
we don't have to.
This way the rules can be simplified a lot.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commits 50cff52f1a (When generating manpages, delete outdated targets
first., 2007-08-02) and f9286765b2 (Documentation/Makefile: remove
cmd-list.made before redirecting to it., 2007-08-06) created these rm
instances for a very rare corner-case: building as root by mistake.
It's odd to have workarounds here, but nowhere else in the Makefile--
which already fails in this stuation, starting from
Documentation/technical/.
We gain nothing but complexity, so let's remove them.
Comments-by: Jeff King <peff@peff.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
asciidoc needs asciidoc.conf, asciidoctor asciidoctor-extensions.rb.
Neither needs the other.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dev support.
* ab/doc-lint:
docs: fix linting issues due to incorrect relative section order
doc lint: lint relative section order
doc lint: lint and fix missing "GIT" end sections
doc lint: fix bugs in, simplify and improve lint script
doc lint: Perl "strict" and "warnings" in lint-gitlink.perl
Documentation/Makefile: make doc.dep dependencies a variable again
Documentation/Makefile: make $(wildcard howto/*.txt) a var
|
|
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a linting script to check the relative order of the sections in
the documentation. We should have NAME, then SYNOPSIS, DESCRIPTION,
OPTIONS etc. in that order.
That holds true throughout our documentation, except for a few
exceptions which are hardcoded in the linting script.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Lint for and fix the three manual pages that were missing the standard
"Part of the linkgit:git[1] suite" end section.
We only do this for the man[157] section documents (we don't have
anything outside those sections), not files to be included,
howto *.txt files etc.
We could also add this to the existing (and then renamed)
lint-gitlink.perl, but I'm not doing that here.
Obviously all of that fits in one script, but I think for something
like this that's a one-off script with global variables it's much
harder to follow when a large part of your script is some if/else or
keeping/resetting of state simply to work around the script doing two
things instead of one.
Especially because in this case this script wants to process the file
as one big string, but lint-gitlink.perl wants to look at it one line
at a time. We could also consolidate this whole thing and
t/check-non-portable-shell.pl, but that one likes to join lines as
part of its shell parsing.
So let's just add another script, whole scaffolding is basically:
use strict;
use warnings;
sub report { ... }
my $code = 0;
while (<>) { ... }
exit $code;
We'd spend more lines effort trying to consolidate them than just
copying that around.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The lint-gitlink.perl script added in ab81411ced (ci: validate
"linkgit:" in documentation, 2016-05-04) was more complex than it
needed to be. It:
- Was using File::Find to recursively find *.txt files in
Documentation/, let's instead use the Makefile as a source of truth
for *.txt files, and pass it down to the script.
- We now don't lint linkgit:* in RelNotes/* or technical/*, which we
shouldn't have been doing in the first place anyway.
- When the doc-diff script was added in beb188e22a (add a script to
diff rendered documentation, 2018-08-06) we started sometimes having
a "git worktree" under Documentation/.
This tree contains a full checkout of git.git, as a result the
"lint" script would recurse into that, and lint any *.txt file
found in that entire repository.
In practice the only in-tree "linkgit" outside of the
Documentation/ tree is contrib/contacts/git-contacts.txt and
contrib/subtree/git-subtree.txt, so this wouldn't emit any errors
Now we instead simply trust the Makefile to give us *.txt files.
Since the Makefile also knows what sections each page should be in we
don't have to open the files ourselves and try to parse that out. As a
bonus this will also catch bugs with the section line in the files
themselves being incorrect.
The structure of the new script is mostly based on
t/check-non-portable-shell.pl. As an added bonus it will also use
pos() to print where the problems it finds are, e.g. given an issue
like:
diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt
[...]
and line numbers. git-cherry therefore detects when commits have been
-"copied" by means of linkgit:git-cherry-pick[1], linkgit:git-am[1] or
-linkgit:git-rebase[1].
+"copied" by means of linkgit:git-cherry-pick[2], linkgit:git-am[3] or
+linkgit:git-rebase[4].
We'll now emit:
git-cherry.txt:20: error: git-cherry-pick[2]: wrong section (should be 1), shown with 'HERE' below:
git-cherry.txt:20: '"copied" by means of linkgit:git-cherry-pick[2]' <-- HERE
git-cherry.txt:20: error: git-am[3]: wrong section (should be 1), shown with 'HERE' below:
git-cherry.txt:20: '"copied" by means of linkgit:git-cherry-pick[2], linkgit:git-am[3]' <-- HERE
git-cherry.txt:21: error: git-rebase[4]: wrong section (should be 1), shown with 'HERE' below:
git-cherry.txt:21: 'linkgit:git-rebase[4]' <-- HERE
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Re-introduce a variable to declare what *.txt files need to be
considered for the purposes of scouring files to generate a dependency
graph of includes.
When doc.dep was introduced in a5ae8e64cf (Fix documentation
dependency generation., 2005-11-07) we had such a variable called
TEXTFILES, but it was refactored away just a few commits after that in
fb612d54c1 (Documentation: fix dependency generation.,
2005-11-07). I'm planning to add more wildcards here, so let's bring
it back.
I'm not calling it TEXTFILES because we e.g. don't consider
Documentation/technical/*.txt when generating the graph (they don't
use includes). Let's instead call it DOC_DEP_TXT.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor occurrences of $(wildcard howto/*.txt) into a single
HOWTO_TXT variable for readability and consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Whenever we fix critical vulnerabilities, we follow some sort of
protocol (e.g. setting a coordinated release date, keeping the fix under
embargo until that time, coordinating with packagers and/or hosting
sites, etc).
Similar in spirit to `Documentation/howto/maintain-git.txt`, let's
formalize the details in a document.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a gitmailmap(5) page similar to how .gitmodules and .gitignore
have their own pages at gitmodules(5) and gitignore(5). Now instead of
"check-mailmap", "blame" and "shortlog" documentation including the
description of the format we link to one canonical place.
This makes things easier for readers, since in our manpage or
web-based[1] output it's not clear that the "MAPPING AUTHORS" sections
aren't subtly different, as opposed to just included.
1. https://git-scm.com/docs/git-check-mailmap
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Build optimization.
* rj/make-clean:
Makefile: don't use a versioned temp distribution directory
Makefile: don't try to clean old debian build product
gitweb/Makefile: conditionally include ../GIT-VERSION-FILE
Documentation/Makefile: conditionally include ../GIT-VERSION-FILE
Documentation/Makefile: conditionally include doc.dep
|
|
The 'clean' target is still noticeably slow on cygwin, despite the
substantial improvement made by the previous patch. For example, the
second invocation of 'make clean' below:
$ make clean >/dev/null 2>&1
$ make clean
...
make[1]: Entering directory '/home/ramsay/git/Documentation'
make[2]: Entering directory '/home/ramsay/git'
make[2]: 'GIT-VERSION-FILE' is up to date.
make[2]: Leaving directory '/home/ramsay/git'
...
$
has been timed at 12.364s on my laptop (an old core i5-4200M @ 2.50GHz,
8GB RAM, 1TB HDD).
Notice that the 'clean' target is making a nested call to the parent
Makefile to ensure that the GIT-VERSION-FILE is up-to-date (prior to
the previous patch, there would have been _two_ such invocations).
This is to ensure that the $(GIT_VERSION) make variable is set, once
that file had been included. However, the 'clean' target does not use
the $(GIT_VERSION) variable, directly or indirectly, so it does not
have any affect on what the target removes. Therefore, the time spent
on ensuring an up to date GIT-VERSION-FILE is wasted effort.
In order to eliminate such wasted effort, use the value of the internal
$(MAKECMDGOALS) variable to only '-include ../GIT-VERSION-FILE' when the
target is not 'clean'. (This drops the time down to 10.361s, on my laptop,
giving an improvement of 16.20%).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'clean' target is noticeably slow on cygwin, even for a 'do-nothing'
invocation of 'make clean'. For example, the second 'make clean' below:
$ make clean >/dev/null 2>&1
$ make clean
GIT_VERSION = 2.29.0
...
make[1]: Entering directory '/home/ramsay/git/Documentation'
GEN mergetools-list.made
GEN cmd-list.made
GEN doc.dep
...
$
has been timed at 23.339s, using git v2.29.0, on my laptop (an old core
i5-4200M @ 2.50GHz, 8GB RAM, 1TB HDD).
Notice that, since the 'doc.dep' file does not exist, make takes the
time (about 8s) to generate several files in order to create the doc.dep
include file. (If an 'include' file is missing, but a target for the
said file is present in the Makefile, make will execute that target
and, if that file now exists, throw away all its internal data and
re-read and re-parse the Makefile). Having spent the time to include
the 'doc.dep' file, the 'clean' target immediately deletes those files.
The document dependencies specified in the 'doc.dep' include file,
expressed as make targets and prerequisites, do not affect what the
'clean' target removes. Therefore, the time spent in generating the
dependencies is completely wasted effort.
In order to eliminate such wasted effort, use the value of the internal
$(MAKECMDGOALS) variable to only '-include doc.dep' when the target is
not 'clean'. (This drops the time down to 12.364s, on my laptop, giving
an improvement of 47.02%).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Versions of docbook-xsl newer than 1.79.1 allows xsltproc to assign
IDs to nodes in the generated HTML consistently, to make the output
resulting from the same source stable and reproducible.
Pass the generate.consistent.ids parameter from the command line to
ask for this feature. Older versions of the tool simply ignores the
parameter and produces their output the same way as before this
change, so there is no need to check for toolchain version.
Signed-off-by: Arnout Engelen <arnout@bzzt.net>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Not all man5/man7 guides are mentioned in the 'git(1)' documentation,
which makes the missing ones somewhat hard to find.
Add a list of the guides to git(1) by leveraging the existing
`Documentation/cmd-list.perl` script to generate a file `cmds-guide.txt`
which gets included in git.txt.
Also, do not hard-code the manual section '1'. Instead, use a regex so
that the manual section is discovered from the first line of each
`git*.txt` file.
This addition was hinted at in 1b81d8cb19 (help: use command-list.txt
for the source of guides, 2018-05-20).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of hard-coding the list of command categories in both
`Documentation/Makefile` and `Documentation/cmd-list.perl`, make the
Makefile the authoritative source and tweak `cmd-list.perl` so that it
receives the list of command categories as argument.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The guides 'gitcredentials' and 'gitremote-helpers' do not currently
appear in command-list.txt.
'gitcredentials' was forgotten back when guides were added to
command-list.txt in 1b81d8cb19 (help: use command-list.txt for the
source of guides, 2018-05-20).
'gitremote-helpers' was moved to section 7 in 439cc74632 (docs: move
gitremote-helpers into section 7, 2019-03-25), but command-list.txt was
not updated at the time.
Add these two guides to the list of guides in 'command-list.txt', so
that they appear in the output of 'git help --guides', and capitalize
the first word of the description of 'gitcredentials', as was done in
1b81d8c (help: use command-list.txt for the source of guides,
2018-05-20) for the other guides.
While at it, add a comment in Documentation/Makefile to remind developers
to update command-list.txt if they add a new guide.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Shawn Pearce explains:
Some repositories contain a lot of references (e.g. android at 866k,
rails at 31k). The reftable format provides:
- Near constant time lookup for any single reference, even when the
repository is cold and not in process or kernel cache.
- Near constant time verification if a SHA-1 is referred to by at least
one reference (for allow-tip-sha1-in-want).
- Efficient lookup of an entire namespace, such as `refs/tags/`.
- Support atomic push `O(size_of_update)` operations.
- Combine reflog storage with ref storage.
This file format spec was originally written in July, 2017 by Shawn
Pearce. Some refinements since then were made by Shawn and by Han-Wen
Nienhuys based on experiences implementing and experimenting with the
format. (All of this was in the context of our work at Google and
Google is happy to contribute the result to the Git project.)
Imported from JGit[1]'s current version (c217d33ff,
"Documentation/technical/reftable: improve repo layout", 2020-02-04)
of Documentation/technical/reftable.md and converted to asciidoc by
running
pandoc -t asciidoc -f markdown reftable.md >reftable.txt
using pandoc 2.2.1. The result required the following additional
minor changes:
- removed the [TOC] directive to add a table of contents, since
asciidoc does not support it
- replaced git-scm.com/docs links with linkgit: directives that link
to other pages within Git's documentation
[1] https://eclipse.googlesource.com/jgit/jgit
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Raise the minimum required version of docbook-xsl package to 1.74,
as 1.74.0 was from late 2008, which is more than 10 years old, and
drop compatibility cruft from our documentation suite.
* ma/doc-discard-docbook-xsl-1.73:
user-manual.conf: don't specify [listingblock]
INSTALL: drop support for docbook-xsl before 1.74
manpage-normal.xsl: fold in manpage-base.xsl
manpage-bold-literal.xsl: stop using git.docbook.backslash
Doc: drop support for docbook-xsl before 1.73.0
Doc: drop support for docbook-xsl before 1.72.0
Doc: drop support for docbook-xsl before 1.71.1
|
|
Git is an enormously flexible and powerful piece of software. However,
it can be intimidating for many users and there are a set of common
questions that users often ask. While we already have some new user
documentation, it's worth adding a FAQ to address common questions that
users often have. Even though some of this is addressed elsewhere in
the documentation, experience has shown that it is difficult for users
to find, so a centralized location is helpful.
Add such a FAQ and fill it with some common questions and answers.
While there are few entries now, we can expand it in the future to cover
more things as we find new questions that users have. Let's also add
section markers so that people answering questions can directly link
users to the proper answer.
The FAQ also addresses common configuration questions that apply not
only to Git as an independent piece of software but also the ecosystem
of CI tools and hosting providers that people use, since these are the
source of common questions. An attempt has been made to avoid
mentioning any particular provider or tool, but to nevertheless cover
common configurations that apply to a wide variety of such tools.
Note that the long lines for certain questions are required, since
Asciidoctor does not permit broken lines there.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Drop the DOCBOOK_XSL_172 config knob, which was needed with docbook-xsl
1.72 (but neither 1.71 nor 1.73). Version 1.73.0 is more than twelve
years old.
Together with the last few commits, we are now at a point where we don't
have any Makefile knobs to cater to old/broken versions of docbook-xsl.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
docbook-xsl 1.72.0 is thirteen years old. Drop the ASCIIDOC_ROFF knob
which was needed to support 1.68.1 - 1.71.1. The next commit will
increase the required/assumed version further.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Drop the DOCBOOK_SUPPRESS_SP mechanism, which needs to be used with
docbook-xsl versions 1.69.1 through 1.71.0.
We probably broke this for Asciidoctor builds in f6461b82b9
("Documentation: fix build with Asciidoctor 2", 2019-09-15). That is, we
should/could fix this similar to 55aca515eb ("manpage-bold-literal.xsl:
match for namespaced "d:literal" in template", 2019-10-31). But rather
than digging out such an old version of docbook-xsl to test that, let's
just use this as an excuse for dropping this decade-old workaround.
DOCBOOK_SUPPRESS_SP was not needed with docbook-xsl 1.69.0 and older.
Maybe such old versions still work fine on our docs, or maybe not. Let's
just refer to everything before 1.71.1 as "not supported". The next
commit will increase the required/assumed version further.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A tutorial on object enumeration.
* es/walken-tutorial:
documentation: add tutorial for object walking
|
|
Existing documentation on object walks seems to be primarily intended
as a reference for those already familiar with the procedure. This
tutorial attempts to give an entry-level guide to a couple of bare-bones
object walks so that new Git contributors can learn the concepts
without having to wade through options parsing or special casing.
The target audience is a Git contributor who is just getting started
with the concept of object walking. The goal is to prepare this
contributor to be able to understand and modify existing commands which
perform revision walks more easily, although it will also prepare
contributors to create new commands which perform walks.
The tutorial covers a basic overview of the structs involved during
object walk, setting up a basic commit walk, setting up a basic
all-object walk, and adding some configuration changes to both walk
types. It intentionally does not cover how to create new commands or
search for options from the command line or gitconfigs.
There is an associated patchset at
https://github.com/nasamuffin/git/tree/revwalk that contains a reference
implementation of the code generated by this tutorial.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Start using DocBook 5 (instead of DocBook 4.5) as Asciidoctor 2.0
no longer works with the older one.
* bc/doc-use-docbook-5:
Documentation: fix build with Asciidoctor 2
|
|
Update support for Asciidoctor documentation toolchain.
* ma/asciidoctor-refmiscinfo:
doc-diff: replace --cut-header-footer with --cut-footer
asciidoctor-extensions: provide `<refmiscinfo/>`
Doc/Makefile: give mansource/-version/-manual attributes
|
|
Rather than hardcoding "Git Manual" and "Git" as the manual and source
in asciidoc.conf, provide them as attributes `manmanual` and
`mansource`. Rename the `git_version` attribute to `manversion`.
These new attribute names are not arbitrary, see, e.g., [1].
For AsciiDoc (8.6.10) and Asciidoctor <1.5.7, this is a no-op. Starting
with Asciidoctor 1.5.7, `manmanual` and `mansource` actually end up in
the xml-files and eventually in the rendered manpages. In particular,
the manpage headers now render just as with AsciiDoc.
No versions of Asciidoctor pick up the `manversion` [2], and older
versions don't pick up any of these attributes. -- We'll fix that with a
bit of a hack in the next commit.
[1] https://asciidoctor.org/docs/user-manual/#man-pages
[2] Note how [1] says "Not used by Asciidoctor".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our documentation toolchain has traditionally been built around DocBook
4.5. This version of DocBook is the last DTD-based version of DocBook.
In 2009, DocBook 5 was introduced using namespaces and its syntax is
expressed in RELAX NG, which is more expressive and allows a wider
variety of syntax forms.
Asciidoctor, one of the alternatives for building our documentation,
moved support for DocBook 4.5 out of core in its recent 2.0 release and
now only supports DocBook 5 in the main release. The DocBoook 4.5
converter is still available as a separate component, but this is not
available in most distro packages. This would not be a problem but for
the fact that we use xmlto, which is still stuck in the DocBook 4.5 era.
xmlto performs DTD validation as part of the build process. This is not
problematic for DocBook 4.5, which has a valid DTD, but it clearly
cannot work for DocBook 5, since no DTD can adequately express its full
syntax. In addition, even if xmlto did support RELAX NG validation,
that wouldn't be sufficient because it uses the libxml2-based xmllint to
do so, which has known problems with validating interleaves in RELAX NG.
Fortunately, there's an easy way forward: ask Asciidoctor to use its
DocBook 5 backend and tell xmlto to skip validation. Asciidoctor has
supported DocBook 5 since v0.1.4 in 2013 and xmlto has supported
skipping validation for probably longer than that.
We also need to teach xmlto how to use the namespaced DocBook XSLT
stylesheets instead of the non-namespaced ones it usually uses.
Normally these stylesheets are interchangeable, but the non-namespaced
ones have a bug that causes them not to strip whitespace automatically
from certain elements when namespaces are in use. This results in
additional whitespace at the beginning of list elements, which is
jarring and unsightly.
We can do this by passing a custom stylesheet with the -x option that
simply imports the namespaced stylesheets via a URL. Any system with
support for XML catalogs will automatically look this URL up and
reference a local copy instead without us having to know where this
local copy is located. We know that anyone using xmlto will already
have catalogs set up properly since the DocBook 4.5 DTD used during
validation is also looked up via catalogs. All major Linux
distributions distribute the necessary stylesheets and have built-in
catalog support, and Homebrew does as well, albeit with a requirement to
set an environment variable to enable catalog support.
On the off chance that someone lacks support for catalogs, it is
possible for xmlto (via xmllint) to download the stylesheets from the
URLs in question, although this will likely perform poorly enough to
attract attention. People still have the option of using the prebuilt
documentation that we ship, so happily this should not be an impediment.
Finally, we need to filter out some messages from other stylesheets that
occur when invoking dblatex in the CI job. This tool strips namespaces
much like the unnamespaced DocBook stylesheets and prints similar
messages. If we permit these messages to be printed to standard error,
our documentation CI job will fail because we check standard error for
unexpected output. Due to dblatex's reliance on Python 2, we may need
to revisit its use in the future, in which case this problem may go
away, but this can be delayed until a future patch.
The final message we filter is due to libxslt on modern Debian and
Ubuntu. The patch which they use to implement reproducible ID
generation also prints messages about the ID generation. While this
doesn't affect our current CI images since they use Ubuntu 16.04 which
lacks this patch, if we upgrade to Ubuntu 18.04 or a modern Debian,
these messages will appear and, like the above messages, cause a CI
failure.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new tutorial targetting specifically aspiring git-core
developers.
* es/first-contrib-tutorial:
doc: add some nit fixes to MyFirstContribution
documentation: add anchors to MyFirstContribution
documentation: add tutorial for first contribution
|
|
This tutorial covers how to add a new command to Git and, in the
process, everything from cloning git/git to getting reviewed on the
mailing list. It's meant for new contributors to go through
interactively, learning the techniques generally used by the git/git
development community.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"make check-docs", "git help -a", etc. did not account for cases
where a particular build may deliberately omit some subcommands,
which has been corrected.
* js/misc-doc-fixes:
Turn `git serve` into a test helper
test-tool: handle the `-C <directory>` option just like `git`
check-docs: do not bother checking for legacy scripts' documentation
docs: exclude documentation for commands that have been excluded
check-docs: allow command-list.txt to contain excluded commands
help -a: do not list commands that are excluded from the build
Makefile: drop the NO_INSTALL variable
remote-testgit: move it into the support directory for t5801
|
|
Dev support update.
* js/check-docs-exe:
check-docs: fix for setups where executables have an extension
check-docs: do not expect guide pages to correspond to commands
check-docs: really look at the documented commands again
docs: do not document the `git remote-testgit` command
docs: move gitremote-helpers into section 7
|
|
When building with certain build options, some commands are excluded
from the build. For example, `git-credential-cache` is skipped when
building with `NO_UNIX_SOCKETS`.
Let's not build or package documentation for those excluded commands.
This issue was pointed out rightfully when running `make check-docs` on
Windows, where we do not yet have Unix sockets, and therefore the
`credential-cache` command is excluded (yet its documentation was built
and shipped).
Note: building the documentation via `make -C Documentation` leaves the
build system with no way to determine which commands have been
excluded. If called thusly, we gracefully fail to exclude their
documentation. Only when building the documentation via the top-level
Makefile will it get excluded properly, or after building
`Documentation/GIT-EXCLUDED-PROGRAMS` manually.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dev support update to make it easier to compare two formatted
results from our documentation.
* ma/doc-diff-doc-vs-doctor-comparison:
doc-diff: add `--cut-header-footer`
doc-diff: support diffing from/to AsciiDoc(tor)
doc-diff: let `render_tree()` take an explicit directory name
Doc: auto-detect changed build flags
|
|
Build fix around use of asciidoctor instead of asciidoc
* ma/asciidoctor-fixes:
asciidoctor-extensions: fix spurious space after linkgit
Documentation/Makefile: add missing dependency on asciidoctor-extensions
Documentation/Makefile: add missing xsl dependencies for manpages
|
|
It is currently in section 1, but that section is intended for
"Executable programs or shell commands".
A more appropriate place is section 7: "Miscellaneous (including macro
packages and conventions), e.g. man(7), groff(7)".
This issue should have been detected earlier by `make check-docs`, but
was missed due to a bug in that Makefile target (that we are about to
fix).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you build the documentation switching between different options,
e.g., to build with both Asciidoc and Asciidoctor, you'll probably find
yourself running `make -C Documentation clean` either too often (wasting
time) or too rarely (getting mixed builds).
Track the flags we're using in the documentation build, similar to how
the main Makefile tracks CFLAGS and prefix flags. Track ASCIIDOC_COMMON
directly rather than its individual components -- that should make it
harder to forget to update the tracking if/when we modify the build
commands.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Ævar Arnfjörð Bjarmason
Todd Zullinger
Felipe Contreras
Matheus Tavares
Johannes Schindelin
Ramsay Jones
Arnout Engelen
Philippe Blain
Jonathan Nieder
brian m. carlson
Martin Ågren
Emily Shaffer