| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --stringparam option is not available on older xmlto versions.
Instead, set man.base.url.for.relative.links via a .xsl file. Older
docbook versions will ignore this without causing grief to users of
older xmlto versions.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Prepare for 1.6.5.5
Documentation: xmlto 0.0.18 does not know --stringparam
t4201: use ISO8859-1 rather than ISO-8859-1
|
|
Newer DocBook stylesheets want man.base.url.for.relative.links
parameter set when formatting manpages with external references
to turn them into full URLs, and leave a helpful "you should
set this parameter" message in the output. Earlier we added
the MAN_BASE_URL make variable to specify the value for it.
When MAN_BASE_URL is not given, it ought to be safe to set the
parameter to empty; it would result in an empty leading path for
older stylesheets that ignore the parameter, and newer ones
would produce the same "relative URL" without the message.
Unfortunately, older xmlto (at least version 0.0.18 released in
early 2004 that comes with RHEL/CentOS 5) does not understand
the --stringparam command line option, so we cannot add the
parameter definition unconditionally to the command line. Work
it around by passing the parameter only when set.
If you do not have a suitable URL prefix, you can pass a quoted empty
string to it, like so:
$ make MAN_BASE_URL='""'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even setting it to empty is better than leaving it unset as it
prevents the warning cruft from appearing in the output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <junio@kernel.org>
|
|
* tr/maint-roff-quote:
Quote ' as \(aq in manpages
|
|
This patch adds an asciidoc version of the "Fighting regressions with
git bisect" article that the author wrote for the Linux-Kongress
2009 (http://www.linux-kongress.org/2009).
This paper might be interesting to people who want to learn as much as
possible about "git bisect" from a single document.
The slides of the related presentation are available at:
http://www.linux-kongress.org/2009/slides/fighting_regressions_with_git_bisect_christian_couder.pdf
But the Linux Kongress people will not publish this paper online because
they print the papers on their UpTimes magazine
(http://www.lob.de/isbn/978-3-86541-358-1). But they don't take away the
rights of the author (which is very nice), so I have the right to publish
it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/maint-roff-quote:
Quote ' as \(aq in manpages
|
|
The docbook/xmlto toolchain insists on quoting ' as \'. This does
achieve the quoting goal, but modern 'man' implementations turn the
apostrophe into a unicode "proper" apostrophe (given the right
circumstances), breaking code examples in many of our manpages.
Quote them as \(aq instead, which is an "apostrophe quote" as per the
groff_char manpage.
Unfortunately, as Anders Kaseorg kindly pointed out, this is not
portable beyond groff, so we add an extra Makefile variable GNU_ROFF
which you need to enable to get the new quoting.
Thanks also to Miklos Vajna for documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
asciidoc 8.4.1 changed the semantics of inline backtick quoting so
that they disable parsing of inline constructs, i.e.,
Input: `{plus}`
Pre 8.4.1: +
Post 8.4.1: {plus}
Fix this by defining the asciidoc attribute 'no-inline-literal'
(which, per the 8.4.1 changelog, is the toggle to return to the old
behaviour) when under ASCIIDOC8.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For all uses of $(ASCIIDOC) in Documentation/Makefile, supply the same
options via $(ASCIIDOC_EXTRA).
Signed-off-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ensure that the Makefile that generates and installs the Documentation is
aware of any SHELL_PATH setting. Use this value if found or the current
setting for SHELL if not. This is an accommodation for systems where sh
is not POSIX enough.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this change, the "spurious .sp" suppression XSLT code is
disabled by default. It can be enabled by defining
DOCBOOK_SUPPRESS_SP.
The "spurious .sp" XSLT fragment was used to work around a bug
first released in docbook-xsl 1.69.1. Modern versions of
docbook-xsl are negatively affected by the code (some empty lines
are omitted from manpage output; see
<http://article.gmane.org/gmane.comp.version-control.git/115302>).
The key revisions in the docbook SVN repo seem to be 5144 (before
docbook-xsl 1.69.1) and 6359 (before docbook-xsl 1.71.1).
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cj/doc-quiet:
Documentation/Makefile: break up texi pipeline
Documentation/Makefile: make most operations "quiet"
Conflicts:
Documentation/Makefile
|
|
This allows manpages viewed on a tty to render inline literal
text in a manner that is distinct from the surrounding text.
The initial implementation (pre-mailing-list) of this patch
included a conditional variant of the XSLT code in
manpage-base.xsl and use xmlto's --stringparam option to
optionally enable the functionality. It turns out that
--stringparam is broken in all versions of xmlto except for the
pre-release, SVN version. Since xmlto is a shell script the patch
to fix it is simple enough, but I instead opted to use xmlto's
"module" functionality.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It seems that the ability to use raw roff codes in asciidoc.conf
was eliminated by docbook-xsl 1.72.0 _and later_. Unlike the
1.72.0-specific XSLT problem, this behavior was not reverted in
later releases.
This patch aims to make it clear that the affected asciidoc
attribute (flag) can be reasonably used with docbook-xsl versions
other than 1.72.0.
Also, document which make variables should be set for various
versions of asciidoc and docbook-xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of manpage-base.xsl and manpage-normal.xsl gets a copy of
the contents of callouts.xsl and the original is removed. The
Makefile is adjusted to refer to manpage-normal.xsl instead of
callouts.xsl. manpage-base.xsl will be later made into a common
base for -normal and -1.72.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most shells define the exit value of a pipeline as the exit value
of the last process. For each texi rule, run the DOCBOOK2X_TEXI
tool and the "fixup" script in their own non-pipeline commands so
that make will notice an error exit code.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adapts the "quiet make" implementation from the main
Makefile.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mv/um-pdf:
Add support for a pdf version of the user manual
|
|
"makeinfo" failed to generate gitman.info from gitman.texi input file
because the combined manual page file contains several nodes with the
same name (DESCRIPTION, OPTIONS, SEE ALSO etc.). An Info document should
contain unique node names.
This patch creates a simple (read: ugly) work-around by suppressing the
validation of the final Info file. Jumping to nodes in the Info document
still works but they are not very useful. Common man-page headings like
DESCRIPTION and OPTIONS appear in the Info node list and they point to
the man page where they appear first (that is git-add currently).
Also, this patch adds directory-entry information for Info document to
make the document appear in the top-level Info directory.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously "docbook2x-texi" failed to generate user-manual.texi and
gitman.texi files from .xml input files because "iconv" stopped at
"illegal input sequence" error. This was due to some UTF-8 octets in the
input .xml files. This patch adds option --encoding=UTF-8 for
"docbook2x-texi" to allow the building of .texi files complete.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use dblatex in order to create a pdf version of the git user manual. No
existing Makefile targets (including "all") are touched, so you need to
explicitly say
make pdf
sudo make install-pdf
to get user-manual.pdf created and installed.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This attempts to make a manpage about workflows that is both handy to
point people at it and as a beginner's introduction.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch introduces a make target "quick-install-html" which installs
the html documentation from the branch origin/html, without the need for
asciidoc/xmlto. This is analogous to the existing "quick-install-doc"
target for the man pages.
We advertise these targets in the INSTALL file now.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch renames the following documents and at the same time converts
them to the man format:
diffcore.txt -> gitdiffcore.txt (man section 7)
repository-layout.txt -> gitrepository-layout.txt (man section 5)
Other documents that reference the above ones are changed accordingly.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch renames the following documents and at the same time converts
them to the man format:
core-tutorial.txt -> gitcore-tutorial.txt
glossary.txt -> gitglossary.txt
But as the glossary is included in the user manual and as the new
gitglossary man page cannot be included as a whole in the user manual,
the actual glossary content is now in its own "glossary-content.txt"
new file. And this file is included by both the user manual and the
gitglossary man page.
Other documents that reference the above ones are changed accordingly
and sometimes improved a little too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch renames the following documents and at the same time converts
them to the man page format:
cvs-migration.txt -> gitcvs-migration.txt
tutorial.txt -> gittutorial.txt
tutorial-2.txt -> gittutorial-2.txt
These new man pages are put in section 7, and other documents that reference
the above ones are change accordingly.
[jc: with help from Nanako to clean things up]
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also now "gitcli(5)" becomes "gitcli(7)".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Jakub Narebski <jnareb@gmail.com> wrote Sun, Feb 03, 2008:
> Junio C Hamano wrote:
> > Jakub Narebski <jnareb@gmail.com> writes:
> >
> > [From] http://thread.gmane.org/gmane.comp.version-control.git/53457/focus=53458
> Julian Phillips:
> > Are you using docbook xsl 1.72? There are known problems building the
> > manpages with that version. 1.71 works, and 1.73 should work when it get
> > released.
I was able to solve this problem with this patch, which adds a XSL file
used specifically for DOCBOOK_XSL_172=YesPlease and where dots and
backslashes are escaped properly so they won't be substituted to the
wrong thing further down the "DocBook XSL pipeline". Doing the escaping
in the existing callout.xsl breaks v1.70.1. Hopefully v1.73 will end
this part of the manpage nightmare.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This page should hold every information about the git ways to parse command
lines, and best practices to be used for scripting.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
|
|
Most of them are still stubs, but the procedure to build the HTML
documentation, maintaining the index and installing the end product are
there.
I placed names of people who are likely to know the most about the topic
in the stub files, so that volunteers will know whom to ask questions as
needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is to primarily pull in MANPATH tweak and help.txt formatting fix
from the master branch.
|
|
Now when using "git help -w cmd", we will try to show the HTML man
page "git-cmd.html" in your prefered web browser.
To do that "help.c" code will call a new shell script
"git-browse-help".
This currently works only if the HTML versions of the man page
have been installed in $(htmldir) (typically "/usr/share/doc/git-doc"),
so new target to do that is added to "Documentation/Makefile".
The browser to use can be configured using the "web.browser"
config variable.
We try to open a new tab in an existing web browser, if possible.
The code in "git-browse-help" is heavily stolen from "git-mergetool"
by Theodore Y. Ts'o. Thanks.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Makefile uses $(PERL_PATH) but Documentation/Makefile uses "perl"; that
means the two Makefiles can use two different Perl installations.
Teach Documentation/Makefile to use PERL_PATH that is exported from the
toplevel Makefile, and give a sane fallback for people who run "make"
from Documentation directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The install-sh script as shipped with automake requires a space between
the -m switch and its argument. Since this is also the regular way of
doing it with other install implementations this change inserts the
missing space in all makefiles.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The categorized list of commands in git(7) and the list of common
commands in "git help" output were maintained separately, which was
insane. This consolidates them to a single command-list.txt file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
From version 1.72 it will replace all dots in roff requests with U+2302
("house" character), and add escaping in output for all instances of dot
that are not in roff requests. This caused the ".ft" hack forcing
monospace font in listingblocks to end up as "\&.ft" and being visible
in the resulting man page.
The fix adds a DOCBOOK_XSL_172 build variable that will disable the
hack. To allow this variable to be defined in config.mak it also moves
build variable handling below the inclusion of config.mak.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "Discussion" section has a lot of useful information, but is a
little wordy, especially for an already-long man page, and is designed
for an audience more of potential git hackers than users, which probably
doesn't make as much sense as git matures. Also, I (perhaps foolishly)
forked a version in the user manual, which has been significantly
rewritten in an attempt to address some of the above problems.
So, remove this section and replace it by a (very terse) summary of the
original material--my attempt at the World's Shortest Git Overview--and
a reference to the appropriate chapter of the user manual. It's
unfortunate to remove something that's been in this place for a long
time, as some people may still depend on finding it there. But I think
we'll want to do this some day anyway.
Cc: Andreas Ericsson <ae@op5.se>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
If cmd-list.made has been created by a previous run as root, output
redirection to it will fail. So remove it before regeneration.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Todd Zullinger
Junio C Hamano
Christian Couder
Thomas Rast
Eric Blake
Ben Walton
Chris Johnsen
Teemu Likonen
Miklos Vajna
Markus Heidelberg
Michael J Gruber
Jonas Fonseca
Mark Levedahl
Pierre Habouzit
Robert Schiele
J. Bruce Fields
David Kastrup