| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit b8a2486f15 (index-pack: support multithreaded delta resolving,
2012-05-06) describes an experiment that shows that setting the number
of threads for index-pack higher than 3 does not help.
I repeated that experiment using a more modern version of Git and a more
modern CPU and got different results.
Here are timings for p5302 against linux.git run on my laptop, a Core
i9-9880H with 8 cores plus hyperthreading (so online-cpus returns 16):
5302.3: index-pack 0 threads 256.28(253.41+2.79)
5302.4: index-pack 1 threads 257.03(254.03+2.91)
5302.5: index-pack 2 threads 149.39(268.34+3.06)
5302.6: index-pack 4 threads 94.96(294.10+3.23)
5302.7: index-pack 8 threads 68.12(339.26+3.89)
5302.8: index-pack 16 threads 70.90(655.03+7.21)
5302.9: index-pack default number of threads 116.91(290.05+3.21)
You can see that wall-clock times continue to improve dramatically up to
the number of cores, but bumping beyond that (into hyperthreading
territory) does not help (and in fact hurts a little).
Here's the same experiment on a machine with dual Xeon 6230's, totaling
40 cores (80 with hyperthreading):
5302.3: index-pack 0 threads 310.04(302.73+6.90)
5302.4: index-pack 1 threads 310.55(302.68+7.40)
5302.5: index-pack 2 threads 178.17(304.89+8.20)
5302.6: index-pack 5 threads 99.53(315.54+9.56)
5302.7: index-pack 10 threads 72.80(327.37+12.79)
5302.8: index-pack 20 threads 60.68(357.74+21.66)
5302.9: index-pack 40 threads 58.07(454.44+67.96)
5302.10: index-pack 80 threads 59.81(720.45+334.52)
5302.11: index-pack default number of threads 134.18(309.32+7.98)
The results are similar; things stop improving at 40 threads. Curiously,
going from 20 to 40 really doesn't help much, either (and increases CPU
time considerably). So that may represent an actual barrier to
parallelism, where we lose out due to context-switching and loss of
cache locality, but don't reap the wall-clock benefits due to contention
of our coarse-grained locks.
So what's a good default value? It's clear that the current cap of 3 is
too low; our default values are 42% and 57% slower than the best times
on each machine. The results on the 40-core machine imply that 20
threads is an actual barrier regardless of the number of cores, so we'll
take that as a maximum. We get the best results on these machines at
half of the online-cpus value. That's presumably a result of the
hyperthreading. That's common on multi-core Intel processors, but not
necessarily elsewhere. But if we take it as an assumption, we can
perform optimally on hyperthreaded machines and still do much better
than the status quo on other machines, as long as we never half below
the current value of 3.
So that's what this patch does.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When PERF_EXTRA is enabled, p5302 checks the performance of index-pack
with various numbers of threads. This can be useful for deciding what
the default should be (which is currently capped at 3 threads based on
the results of this script).
However, we only go up to 8 threads, and modern machines may have more.
Let's get the number of CPUs from test-tool, and test various numbers of
threads between one and that maximum.
Note that the current tests aren't all identical, as we have to set
GIT_FORCE_THREADS for the --threads=1 test (which measures the overhead
of starting a single worker thread versus the "0" case of using the main
thread). To keep the loop simple, we'll keep the "0" case out of it, and
set GIT_FORCE_THREADS=1 for all of the other cases (it's a noop for all
but the "1" case, since numbers higher than 1 would always need
threads).
Note also that we could skip running "test-tool" if PERF_EXTRA isn't
set. However, there's some small value in knowing the number of threads,
so that we can mark each test as skipped in the output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The primary function of the perf suite is to detect regressions (or
improvements) between versions of Git. The only numbers we show a direct
comparison for are timings between the same test run on two different
versions.
However, it can sometimes be used to collect other information. For
instance, p5302 runs the same index-pack operation with different thread
counts. The output doesn't directly compare these, but anybody
interested in working on index-pack can manually compare the results.
For a normal regression run of the full perf-suite, though, this incurs
a significant cost to generate numbers nobody will actually look at;
about 25% of the total time of the test suite is spent in p5302. And the
low-thread-count runs are the most expensive part of it, since they're
(unsurprisingly) not using as many threads.
Let's skip these tests by default, but make it possible for people
working on index-pack to still run them by setting an environment
variable. Rather than make this specific to p5302, let's introduce a
generic mechanism. This makes it possible to run the full suite with
every possible test if somebody really wants to burn some CPU.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
master
l10n-2.28.0-rnd1
* tag 'l10n-2.28.0-rnd1' of https://www.github.com/git-l10n/git-po:
l10n: es: 2.28.0 round 1
l10n: de.po: Update German translation for Git v2.28.0
l10n: de.po: fix grammar
l10n: zh_CN: for git v2.28.0 l10n round 1
l10n: zh_TW.po: v2.28.0 round 1 (0 untranslated)
l10n: vi.po: correct "ident line" translation
l10n: vi.po(4931t): Updated translation for v2.28.0
l10n: fr v2.28.0 round 1
l10n: sv.po: Update Swedish translation (4931t0f0u)
l10n: it.po: update the Italian translation for Git 2.28.0 round 1
l10n: tr: v2.28.0 round 1
l10n: git.pot: v2.28.0 round 1 (70 new, 14 removed)
l10n: Update Catalan translation
|
|
* 'master' of github.com:Softcatala/git-po:
l10n: Update Catalan translation
|
|
Signed-off-by: Christopher Diaz Riveros <christopher.diaz.riv@gmail.com>
|
|
A new hook.
* ps/ref-transaction-hook:
githooks.txt: use correct "reference-transaction" hook name
|
|
The "reference transaction" hook was introduced in commit 6754159767
(refs: implement reference transaction hook, 2020-06-19). The name of
the hook is declared as "reference-transaction" in "refs.c" and
testcases, but the name declared in "githooks.txt" is different.
Signed-off-by: Bojun Chen <bojun.cbj@alibaba-inc.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix to a "git prompt" regression during this development cycle.
* en/sparse-status:
git-prompt: change == to = for zsh's sake
|
|
Translate 70 new messages (4931t0f0u) for git 2.28.0.
Reviewed-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'l10n/zh_TW/200716' of github.com:l10n-tw/git-po:
l10n: zh_TW.po: v2.28.0 round 1 (0 untranslated)
|
|
When using git-prompt.sh with zsh, __git_ps1 currently errs
when inside a repo with:
__git_ps1:96: = not found
Avoid using non-portable "==" that is only understood by bash
and not zsh. Change to "=" so that the prompt script becomes
usable with zsh again.
Signed-off-by: David J. Malan <malan@harvard.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* https://github.com/prati0100/git-gui:
git-gui: allow opening work trees from the startup dialog
|
|
Signed-off-by: Yi-Jyun Pan <pan93412@gmail.com>
|
|
While we're at it, fix some minor misspelling
and improve translation for 3-way-merging.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Last minute fix-up to tests for portability.
* dl/branch-cleanup:
t3200: don't grep for `strerror()` string
|
|
Last minute fix-up to documentation.
* js/pu-to-seen:
gitworkflows.txt: fix broken subsection underline
|
|
Last minute fix-up to the release notes.
* jc/relnotes-v0-extension-update:
RelNotes: update the v0 with extension situation
|
|
In 6b7093064a ("t3200: test for specific errors", 2020-06-15), we
learned to grep stderr to ensure that the failing `git branch`
invocations fail for the right reason. In two of these tests, we grep
for "File exists", expecting the string to show up there since config.c
calls `error_errno()`, which ends up including `strerror(errno)` in the
error message.
But as we saw in 4605a73073 ("t1091: don't grep for `strerror()`
string", 2020-03-08), there exists at least one implementation where
`strerror()` yields a slightly different string than the one we're
grepping for. In particular, these tests fail on the NonStop platform.
Similar to 4605a73073, grep for the beginning of the string instead to
avoid relying on `strerror()` behavior.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
AsciiDoctor renders the "~~~~~~~~~" literally. That's not our intention:
it is supposed to indicate a level 2 subsection. In 828197de8f ("docs:
adjust for the recent rename of `pu` to `seen`", 2020-06-25), the length
of this section header grew by two characters but we didn't adjust the
number of ~ characters accordingly. AsciiDoc handles this discrepancy ok
and still picks this up as a subsection title, but Asciidoctor is not as
forgiving.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the two-patch series for regression fix, to the users from 2.27
days, there is no visible behaviour change---we do not warn and fail
use of v0 repositories with newer extensions yet, so there is nothing
to note in the backward compatibility section.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 2.28-rc0, we corrected a bug that some repository extensions are
honored by mistake even in a version 0 repositories (these
configuration variables in extensions.* namespace were supposed to
have special meaning in repositories whose version numbers are 1 or
higher), but this was a bit too big a change.
* jn/v0-with-extensions-fix:
repository: allow repository format upgrade with extensions
Revert "check_repository_format_gently(): refuse extensions for old repositories"
|
|
Now that we officially permit repository extensions in repository
format v0, permit upgrading a repository with extensions from v0 to v1
as well.
For example, this means a repository where the user has set
"extensions.preciousObjects" can use "git fetch --filter=blob:none
origin" to upgrade the repository to use v1 and the partial clone
extension.
To avoid mistakes, continue to forbid repository format upgrades in v0
repositories with an unrecognized extension. This way, a v0 user
using a misspelled extension field gets a chance to correct the
mistake before updating to the less forgiving v1 format.
While we're here, make the error message for failure to upgrade the
repository format a bit shorter, and present it as an error, not a
warning.
Reported-by: Huan Huan Chen <huanhuanchen@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
repositories"
This reverts commit 14c7fa269e42df4133edd9ae7763b678ed6594cd.
The core.repositoryFormatVersion field was introduced in ab9cb76f661
(Repository format version check., 2005-11-25), providing a welcome
bit of forward compatibility, thanks to some welcome analysis by
Martin Atukunda. The semantics are simple: a repository with
core.repositoryFormatVersion set to 0 should be comprehensible by all
Git implementations in active use; and Git implementations should
error out early instead of trying to act on Git repositories with
higher core.repositoryFormatVersion values representing new formats
that they do not understand.
A new repository format did not need to be defined until 00a09d57eb8
(introduce "extensions" form of core.repositoryformatversion,
2015-06-23). This provided a finer-grained extension mechanism for
Git repositories. In a repository with core.repositoryFormatVersion
set to 1, Git implementations can act on "extensions.*" settings that
modify how a repository is interpreted. In repository format version
1, unrecognized extensions settings cause Git to error out.
What happens if a user sets an extension setting but forgets to
increase the repository format version to 1? The extension settings
were still recognized in that case; worse, unrecognized extensions
settings do *not* cause Git to error out. So combining repository
format version 0 with extensions settings produces in some sense the
worst of both worlds.
To improve that situation, since 14c7fa269e4
(check_repository_format_gently(): refuse extensions for old
repositories, 2020-06-05) Git instead ignores extensions in v0 mode.
This way, v0 repositories get the historical (pre-2015) behavior and
maintain compatibility with Git implementations that do not know about
the v1 format. Unfortunately, users had been using this sort of
configuration and this behavior change came to many as a surprise:
- users of "git config --worktree" that had followed its advice
to enable extensions.worktreeConfig (without also increasing the
repository format version) would find their worktree configuration
no longer taking effect
- tools such as copybara[*] that had set extensions.partialClone in
existing repositories (without also increasing the repository format
version) would find that setting no longer taking effect
The behavior introduced in 14c7fa269e4 might be a good behavior if we
were traveling back in time to 2015, but we're far too late. For some
reason I thought that it was what had been originally implemented and
that it had regressed. Apologies for not doing my research when
14c7fa269e4 was under development.
Let's return to the behavior we've had since 2015: always act on
extensions.* settings, regardless of repository format version. While
we're here, include some tests to describe the effect on the "upgrade
repository version" code path.
[*] https://github.com/google/copybara/commit/ca76c0b1e13c4e36448d12c2aba4a5d9d98fb6e7
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix to the code to produce progress bar, which is new in the
upcoming release.
* tb/commit-graph-no-check-oids:
commit-graph: fix "Collecting commits from input" progress line
|
|
Doc update.
* ct/diff-with-merge-base-clarification:
git-diff.txt: reorder possible usages
git-diff.txt: don't mark required argument as optional
|
|
The code to produce progress output from "git commit-graph --write"
had a few breakages, which have been fixed.
* sg/commit-graph-progress-fix:
commit-graph: fix "Writing out commit graph" progress counter
commit-graph: fix progress of reachable commits
|
|
When an aliased command, whose output is piped to a pager by git,
gets killed by a signal, the pager got into a funny state, which
has been corrected (again).
* ta/wait-on-aliased-commands-upon-signal:
Wait for child on signal death for aliases to externals
Wait for child on signal death for aliases to builtins
|
|
To display a progress line while reading commits from standard input
and looking them up, 5b6653e523 (builtin/commit-graph.c: dereference
tags in builtin, 2020-05-13) should have added a pair of
start_delayed_progress() and stop_progress() calls around the loop
reading stdin. Alas, the stop_progress() call ended up at the wrong
place, after write_commit_graph(), which does all the commit-graph
computation and writing, and has several progress lines of its own.
Consequently, that new
Collecting commits from input: 1234
progress line is overwritten by the first progress line shown by
write_commit_graph(), and its final "done" line is shown last, after
everything is finished:
$ { sleep 3 ; git rev-list -3 HEAD ; sleep 1 ; } | ~/src/git/git commit-graph write --stdin-commits
Expanding reachable commits in commit graph: 873402, done.
Writing out commit graph in 4 passes: 100% (3493608/3493608), done.
Collecting commits from input: 3, done.
Furthermore, that stop_progress() call was added after the 'cleanup'
label, where that loop reading stdin jumps in case of an error. In
case of invalid input this then results in the "done" line shown after
the error message:
$ { sleep 3 ; git rev-list -3 HEAD ; echo junk ; } | ~/src/git/git commit-graph write --stdin-commits
error: unexpected non-hex object ID: junk
Collecting commits from input: 3, done.
Move that stop_progress() call to the right place.
While at it, drop the unnecessary 'if (progress)' condition protecting
the stop_progress() call, because that function is prepared to handle
a NULL progress struct.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description of `git diff` goes through several different invocations
(numbering added by me):
1. git diff [<options>] [--] [<path>...]
2. git diff [<options>] --no-index [--] <path> <path>
3. git diff [<options>] --cached [<commit>] [--] [<path>...]
4. git diff [<options>] <commit> [--] [<path>...]
5. git diff [<options>] <commit> <commit> [--] [<path>...]
6. git diff [<options>] <commit>..<commit> [--] [<path>...]
7. git diff [<options>] <commit> <commit>... <commit> [--] [<path>...]
8. git diff [<options>] <commit>...<commit> [--] [<path>...]
It then goes on to say that "all of the <commit> in the above
description, except in the last two forms that use '..' notations, can
be any <tree>". The "last two" actually refers to 6 and 8. This got out
of sync in commit b7e10b2ca2 ("Documentation: usage for diff combined
commits", 2020-06-12) which added item 7 to the mix.
As a further complication, after b7e10b2ca2 we also have some potential
confusion around "the '..' notation". The "..[.]" in items 6 and 8 are
part of the rev notation, whereas the "..." in item 7 is manpage
language for "one or more".
Move item 6 down, i.e., to between 7 and 8, to restore the ordering.
Because 6 refers to 5 ("synonymous to the previous form") we need to
tweak the language a bit.
An added bonus of this commit is that we're trying to steer users away
from `git diff <commit>..<commit>` and moving it further down probably
doesn't hurt.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit b7e10b2ca2 ("Documentation: usage for diff combined commits",
2020-06-12) modified the synopsis by adding an optional "[<commit>...]"
to
'git diff' [<options>] <commit> <commit> [--] [<path>...]
to effectively add
'git diff' [<options>] <commit> <commit>... <commit> [--] [<path>...]
as another valid invocation. Which makes sense.
Further down, in the description, it left the existing entry for
'git diff' [<options>] <commit> <commit> [--] [<path>...]
intact and added a new entry on
'git diff' [<options>] <commit> [<commit>...] <commit> [--] [<path>...]
where it says that "[t]his form is to view the results of a merge
commit" and details how "the first listed commit must be the merge
itself". But one possible instantiation of this form is `git diff
<commit> <commit>` for which the added text doesn't really apply.
Remove the brackets so that we lose this overlap between the two
descriptions. We can still use the more compact representation in the
synopsis.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'fr_v2.28.0_rnd1' of github.com:jnavila/git:
l10n: fr v2.28.0 round 1
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
* 'master' of github.com:nafmo/git-l10n-sv:
l10n: sv.po: Update Swedish translation (4931t0f0u)
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Signed-off-by: Alessandro Menti <alessandro.menti@alessandromenti.it>
|
|
Signed-off-by: Emir Sarı <bitigchi@me.com>
|
|
Generate po/git.pot from v2.28.0-rc0 for git v2.28.0 l10n round 1.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" failed to catch an error from fstat() after updating
a path in the working tree.
* mt/entry-fstat-fallback-fix:
entry: check for fstat() errors after checkout
|
|
Typofix.
* ma/rebase-doc-typofix:
git-rebase.txt: fix description list separator
|
|
"fetch.writeCommitGraph" was enabled when "feature.experimental" is
asked for, but it was found to be a bit too risky even for bold
folks in its current shape. The configuration has been ejected, at
least for now, from the "experimental" feature set.
* jn/eject-fetch-write-commit-graph-out-of-experimental:
experimental: default to fetch.writeCommitGraph=false
|
Jeff King
Junio C Hamano
Jiang Xin
Christopher Diaz Riveros
Bojun Chen
Matthias Rüster
Ralf Thielow
Taylor Blau
David J. Malan
Yi-Jyun Pan
Đoàn Trần Công Danh
Tran Ngoc Quan
Martin Ågren
Jonathan Nieder
SZEDER Gábor
Jean-Noël Avila
Peter Krefting
Alessandro Menti
Emir Sarı