| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This script is one of the sizeable ones that tempted people to copy
its "neibouring style" in their new code, but was littered with
styles incompatible with our style guide.
- use one tab, not four spaces, per indent level;
- long lines can be wrapped after '|', '&&', or '||' for
readability.
- structures like "if .. then .. else .. fi", "while .. do .. done"
are split into lines in such a way that does not require
unnecessary semicolon.
- case, esac and case-arms align at the same column.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rj/maint-grep-remove-redundant-test:
t7810-*.sh: Remove redundant test
|
|
* hv/link-alt-odb-entry:
link_alt_odb_entry: fix read over array bounds reported by valgrind
|
|
Hopefully that will be the final 1.7.11.x maintenance release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/block-sha1:
Makefile: BLK_SHA1 does not require fast htonl() and unaligned loads
block-sha1: put expanded macro parameters in parentheses
block-sha1: avoid pointer conversion that violates alignment constraints
|
|
* jn/make-assembly-in-right-directory:
Makefile: fix location of listing produced by "make subdir/foo.s"
|
|
* ms/daemon-doc-typo:
Documentation/git-daemon: add missing word
|
|
* lm/git-blame-el:
git-blame.el: Do not use bare 0 to mean (point-min)
git-blame.el: Use with-current-buffer where appropriate
git-blame.el: Do not use goto-line in lisp code
|
|
* rs/ipv6-ssh-url:
git: Wrong parsing of ssh urls with IPv6 literals ignores port
|
|
* rs/git-blame-mapcar-mapc:
git-blame.el: use mapc instead of mapcar
|
|
* rr/doc-commit:
commit: document a couple of options
|
|
- (glossary) the quotes around the Wikipedia URL prevented its
linkification in frontends that support it; remove them
- (manual) newer version (SHA-1) == following, older == preceding, not
the other way around
- trivial typo and wording fixes
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/maint-checkout-orphan-check-fix:
checkout: don't confuse ref and object flags
|
|
* mh/maint-revisions-doc:
Enumerate revision range specifiers in the documentation
Make <refname> documentation more consistent.
|
|
* jc/mergetool-tool-help:
mergetool: support --tool-help option like difftool does
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"$GIT_DIR/COMMIT_EDITMSG" file that is used to hold the commit log
message user edits was not documented.
* jk/maint-commit-document-editmsg:
commit: document the temporary commit message file
|
|
The advise() function did not use varargs correctly to format
its message.
* jk/maint-advise-vaddf:
advice: pass varargs to strbuf_vaddf, not strbuf_addf
|
|
"git commit-tree" learned a more natural "-p <parent> <tree>" order
of arguments long time ago, but recently forgot it by mistake.
* kk/maint-commit-tree:
Revert "git-commit-tree(1): update synopsis"
commit-tree: resurrect command line parsing updates
|
|
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
|
|
When "git am" failed, old timers knew to check .git/rebase-apply/patch
to see what went wrong, but we never told the users about it.
* pg/maint-1.7.9-am-where-is-patch:
am: indicate where a failed patch is to be found
|
|
When "git submodule add" clones a submodule repository, it can get
confused where to store the resulting submodule repository in the
superproject's .git/ directory when there is a symbolic link in the
path to the current directory.
* jl/maint-1.7.10-recurse-submodules-with-symlink:
submodules: don't stumble over symbolic links when cloning recursively
|
|
In 1.7.9 era, we taught "git rebase" about the raw timestamp format
but we did not teach the same trick to "filter-branch", which rolled
a similar logic on its own.
* jc/maint-filter-branch-epoch-date:
t7003: add test to filter a branch with a commit at epoch
date.c: Fix off by one error in object-header date parsing
filter-branch: do not forget the '@' prefix to force git-timestamp
|
|
Since commit bbc09c22 ("grep: rip out support for external grep",
12-01-2010), test number 60 ("grep -C1 hunk mark between files") is
essentially the same as test number 59.
Test 59 was intended to verify the behaviour of git-grep resulting
from multiple invocations of an external grep. As part of the test,
it creates and adds 1024 files to the index, which is now wasted
effort.
Remove test 59, since it is now redundant.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
pfxlen can be longer than the path in objdir when relative_base
contains the path to gits object directory. Here we are interested
in checking if ent->base[] (the part that corresponds to .git/objects)
is the same string as objdir, and the code NUL-terminated ent->base[]
to
LEADING PATH\0XX/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\0
in preparation for these "duplicate check" step (before we return
from the function, the first NUL is turned into '/' so that we can
fill XX when probing for loose objects). All we need to do is to
compare the string with the path to our object directory.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are leaving a detached HEAD, we do a revision traversal to
check whether we are orphaning any commits, marking the commit we're
leaving as the start of the traversal, and all existing refs as
uninteresting.
Prior to commit 468224e5, we did so by calling for_each_ref, and
feeding each resulting refname to setup_revisions. Commit 468224e5
refactored this to simply mark the pending objects, saving an extra
lookup.
However, it confused the "flags" parameter to the each_ref_fn
clalback, which is about the flags we found while looking up the ref
with the object flag. Because REF_ISSYMREF ("this ref is a symbolic
ref, e.g. refs/remotes/origin/HEAD") happens to be the same bit
pattern as SEEN ("we have picked this object up from the pending
list and moved it to revs.commits list"), we incorrectly reported
that a commit previously at the detached HEAD will become
unreachable if the only ref that can reach the commit happens to be
pointed at by a symbolic ref.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was a bit hard to learn how <rev>^@, <rev>^! and various other
forms of range specifiers are used, because they were discussed
mostly in the prose part of the documentation, unlike various forms
of extended SHA-1 expressions that are listed in an enumerated list.
Also add a few more examples showing use of <rev>, <rev>..<rev> and
<rev>^! forms, stolen from a patch by Max Horn.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not document COMMIT_EDITMSG at all, but users may want
to know about it for two reasons:
1. They may want to tell their editor to configure itself
for formatting a commit message.
2. If a commit is aborted by an error, the user may want
to recover the commit message they typed.
Let's put a note in git-commit(1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This way we do not have to risk the list of tools going out of sync
between the implementation and the documentation.
In the same spirit as bf73fc2 (difftool: print list of valid tools
with '--tool-help', 2012-03-29), trim the list of merge backends in
the documentation. We do not want to have a complete list of valid
tools; we only want a list to help people guess what kind of things
the tools do to be specified there, and refer them to --tool-help
for a complete list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The advise() function takes a variable number of arguments
and converts them into a va_list object to pass to strbuf
for handling. However, we accidentally called strbuf_addf
(that takes a variable number of arguments) instead of
strbuf_vaddf (that takes a va_list).
This bug dates back to v1.7.8.1-1-g23cb5bf, but we never
noticed because none of the current callers passes a string
with a format specifier in it. And the compiler did not
notice because the format string is not available at
compile time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
block-sha1/ is fast on most known platforms. Clarify the Makefile to
be less misleading about that.
Early versions of block-sha1/ explicitly relied on fast htonl() and
fast 32-bit loads with arbitrary alignment. Now it uses those on some
arches but the default behavior is byte-at-a-time access for the sake
of arches like ARM, Alpha, and their kin and it is still pretty fast
on these arches (fast enough to supersede the mozilla SHA1
implementation and the hand-written ARM assembler implementation that
were bundled before).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When I invoke "make block-sha1/sha1.s", 'make' runs $(CC) -S without
specifying where it should put its output and the output ends up in
./sha1.s. Confusing.
Add an -o option to the .s rule to fix this. We were already doing
that for most compiler invocations but had forgotten it for the
assembler listings.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
't' is currently always a numeric constant, but it can't hurt to
prepare for the day that it becomes useful for a caller to pass in a
more complex expression.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With 660231aa (block-sha1: support for architectures with memory
alignment restrictions, 2009-08-12), blk_SHA1_Update was modified to
access 32-bit chunks of memory one byte at a time on arches that
prefer that:
#define get_be32(p) ( \
(*((unsigned char *)(p) + 0) << 24) | \
(*((unsigned char *)(p) + 1) << 16) | \
(*((unsigned char *)(p) + 2) << 8) | \
(*((unsigned char *)(p) + 3) << 0) )
The code previously accessed these values by just using htonl(*p).
Unfortunately, Michael noticed on an Alpha machine that git was using
plain 32-bit reads anyway. As soon as we convert a pointer to int *,
the compiler can assume that the object pointed to is correctly
aligned as an int (C99 section 6.3.2.3 "pointer conversions"
paragraph 7), and gcc takes full advantage by using a single 32-bit
load, resulting in a whole bunch of unaligned access traps.
So we need to obey the alignment constraints even when only dealing
with pointers instead of actual values. Do so by changing the type
of 'data' to void *. This patch renames 'data' to 'block' at the same
time to make sure all references are updated to reflect the new type.
Reported-tested-and-explained-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The error message from "git push $there :bogo" (and its equivalent
"git push $there --delete bogo") mentioned that we tried and failed
to guess what ref is being deleted based on the LHS of the refspec,
which we don't.
* jk/push-delete-ref-error-message:
push: don't guess at qualifying remote refs on deletion
|
|
A handful of files and directories we create had tighter than
necessary permission bits when the user wanted to have group
writability (e.g. by setting "umask 002").
* ar/clone-honor-umask-at-top:
add: create ADD_EDIT.patch with mode 0666
rerere: make rr-cache fanout directory honor umask
Restore umasks influence on the permissions of work tree created by clone
|
|
"commit --amend" used to refuse amending a commit with an empty log
message, with or without "--allow-empty-message".
* cw/amend-commit-without-message:
Allow edit of empty message with commit --amend
|
|
"git commit --amend --only --" was meant to allow "Clever" people to
rewrite the commit message without making any change even when they
have already changes for the next commit added to their index, but
it never worked as advertised since it was introduced in 1.3.0 era.
* jk/maint-commit-amend-only-no-paths:
commit: fix "--amend --only" with no pathspec
|
|
Even though the index can record pathnames longer than 1<<12 bytes,
in some places we were not comparing them in full, potentially
replacing index entries instead of adding.
* tg/maint-cache-name-compare:
cache_name_compare(): do not truncate while comparing paths
|
|
"git show"'s auto-walking behaviour was an unreliable and
unpredictable hack; it now behaves just like "git log" does when it
walks.
* tr/maint-show-walk:
show: fix "range implies walking"
Demonstrate git-show is broken with ranges
|
|
"git diff", "git status" and anything that internally uses the
comparison machinery was utterly broken when the difference
involved a file with "-" as its name. This was due to the way "git
diff --no-index" was incorrectly bolted on to the system, making
any comparison that involves a file "-" at the root level
incorrectly read from the standard input.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
|
|
We did not have test to make sure "git rebase" without extra options
filters out an empty commit in the original history.
* mz/empty-rebase-test:
add test case for rebase of empty commit
|
|
"git fast-export" produced an input stream for fast-import without
properly quoting pathnames when they contain SPs in them.
* js/fast-export-paths-with-spaces:
fast-export: quote paths with spaces
|
|
"git checkout --detach", when you are still on an unborn branch,
should be forbidden, but it wasn't.
* cw/no-detaching-an-unborn:
git-checkout: disallow --detach on unborn branch
|
|
Some implementations of Perl terminates "lines" with CRLF even when
the script is operating on just a sequence of bytes. Make sure to
use "$PERL_PATH", the version of Perl the user told Git to use, in
our tests to avoid unnecessary breakages in tests.
* vr/use-our-perl-in-tests:
t/README: add a bit more Don'ts
tests: enclose $PERL_PATH in double quotes
t/test-lib.sh: export PERL_PATH for use in scripts
t: Replace 'perl' by $PERL_PATH
|
|
There are three ways to specify an external diff command:
GIT_EXTERNAL_DIFF in the environment, diff.external in the
config, or a "diff" gitattribute. The current order of
precedence is:
1. gitattribute
2. GIT_EXTERNAL_DIFF
3. diff.external
Usually our rule is that environment variables should take
precedence over on-disk config (i.e., option 2 should come
before option 1). However, this situation is trickier than
some, because option 1 is more specific to the individual
file than option 2 (which affects all files), so it might be
preferable. So the current behavior can be seen as
implementing "do the specific thing if we can, but fall back
to this general thing".
This is probably not what we would do if we were writing git
from scratch, but it has been this way for several years,
and is not worth changing. So let's at least document that
this is the way it's supposed to work with a test.
While we're there, let's also make sure that diff.external
(which was not previously tested at all) works by running it
through the same tests as GIT_EXTERNAL_DIFF.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Upon seeing a type-change filepair, "diff --no-ext-diff" does not
show the usual "deletion followed by addition" split patch and does
not run the external diff driver either.
This is because the logic to disable external diff was placed at a
wrong level in the callchain. run_diff_cmd() decides to show the
split patch only when external diff driver is not configured or
specified via GIT_EXTERNAL_DIFF environment, but this is done before
checking if --no-ext-diff was given. To make things worse,
run_diff_cmd() checks --no-ext-diff and disables the output for such
a filepair completely, as the callchain below it (e.g. builtin_diff)
does not want to handle typechange filepairs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit d28436736a078a429213003a9472e8caeb86c286, which
was done without realizing that the updated command line argument
order was lost by mistake.
|
Junio C Hamano
Junio C Hamano
Štěpán Němec
Ramsay Jones
Heiko Voigt
Jeff King
Jonathan Nieder