| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Comit c24b7f6736 (pager: test for exit code with and without SIGPIPE,
2021-02-02) introduced some tests that don't reliably generate SIGPIPE
where we expect it (i.e., when our pager doesn't read all of the output
from git-log).
There are two problems that somewhat cancel each other out.
First is that the output of git-log isn't very large (only around 800
bytes). So even if the pager doesn't read all of our output, it's racy
whether or not we'll actually get a SIGPIPE (we won't if we write all of
the output into the pipe buffer before the pager exits).
But we wrap git-log with test_terminal, which is supposed to propagate
the exit status of git-log. However, it doesn't always do so;
test_terminal will copy to stdout any lines that it got from our fake
pager, and it pipes to an empty command. So most of the time we are
seeing a SIGPIPE from test_terminal itself (though this is likewise
racy).
Let's try to make this more robust in two ways:
1. We'll put a commit with a huge message at the tip of history. Since
this is over a megabyte, it should fill the OS pipe buffer
completely, causing git-log to keep trying to write even after the
pager has exited.
2. We'll redirect the output of test_terminal to /dev/null. That means
it can never get SIGPIPE itself, and will always be giving us the
exit code from git-log.
These two changes reveal that one of the tests was looking for the wrong
behavior. If we try to start a pager that does not exist (according to
execve()), then the error propagates from start_command() back to the
pager code as an error, and we avoid redirecting git-log's stdout to the
broken pager entirely. Instead, it goes straight to the original stdout
(test_terminal's pty in this case), and we do not see a SIGPIPE at all.
So the test "git attempts to page to nonexisting pager command, gets
SIGPIPE" is checking the wrong outcome; it should be looking for a
successful exit (and was only confused by test_terminal's SIGPIPE).
There's a related test, "git discards nonexisting pager without
SIGPIPE", which sets the pager to a shell command which will read all
input and _then_ run a non-existing command. But that doesn't trigger
the same execve() behavior. We really do run the shell there and
redirect git-log's stdout to it. And the fact that the shell then exits
127 is not interesting. It is not different at that point than the
earlier test to check for "exit 1". So we can drop that test entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 507d7804c0 (pager: don't use unsafe functions in signal handlers,
2015-09-04), we have a separate code path in wait_or_whine() for the
case that we're in a signal handler. But that code path misses some of
the cases handled by the main logic.
This was improved in be8fc53e36 (pager: properly log pager exit code
when signalled, 2021-02-02), but that covered only case: actually
returning the correct error code. But there are some other cases:
- if waitpid() returns failure, we wouldn't notice and would look at
uninitialized garbage in the status variable; it's not clear if it's
possible to trigger this or not
- if the process exited by signal, then we would still report "-1"
rather than the correct signal code
This latter case even had a test added in be8fc53e36, but it doesn't
work reliably. It sets the pager command to:
>pager-used; test-tool sigchain
The latter command will die by signal, but because there are multiple
commands, there will be a shell in between. And it's the shell whose
waitpid() call will see the signal death, and it will then exit with
code 143, which is what Git will see.
To make matters even more confusing, some shells (such as bash) will
realize that there's nothing for the shell to do after test-tool
finishes, and will turn it into an exec. So the test was only checking
what it thought when /bin/sh points to a shell like bash (we're relying
on the shell used internally by Git to spawn sub-commands here, so even
running the test under bash would not be enough).
This patch adjusts the tests to explicitly call "exec" in the pager
command, which produces a consistent outcome regardless of shell. Note
that without the code change in this patch it _should_ fail reliably,
but doesn't. That test, like its siblings, tries to trigger SIGPIPE in
the git-log process writing to the pager, but only do so racily. That
will be fixed in a follow-on patch.
For the code change here, we have two options:
- we can teach the in_signal code to handle WIFSIGNALED()
- we can stop returning early when in_signal is set, and instead
annotate individual calls that we need to skip in this case
The former is a simpler patch, but means we're essentially duplicating
all of the logic. So instead I went with the latter. The result is a
bigger patch, and we do run the risk of new code being added but
forgetting to handle in_signal. But in the long run it seems more
maintainable.
I've skipped any non-trivial calls for the in_signal case, like calling
error(). We'll also skip the call to clear_child_for_cleanup(), as we
were before. This is arguably the wrong thing to do, since we wouldn't
want to try to clean it up again. But:
- we can't call it as-is, because it calls free(), which we must avoid
in a signal handler (we'd have to pass in_signal so it can skip the
free() call)
- we'll only go through the list of children to clean once, since our
cleanup_children_on_signal() handler pops itself after running (and
then re-raises, so eventually we'd just exit). So this cleanup only
matters if a process is on the cleanup list _and_ it has a separate
handler to clean itself up. Which is questionable in the first place
(and AFAIK we do not do).
- double-cleanup isn't actually that bad anyway. waitpid() will just
return an error, which we won't even report because of in_signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git invokes a pager that exits with non-zero the common case is
that we'll already return the correct SIGPIPE failure from git itself,
but the exit code logged in trace2 has always been incorrectly
reported[1]. Fix that and log the correct exit code in the logs.
Since this gives us something to test outside of our recently-added
tests needing a !MINGW prerequisite, let's refactor the test to run on
MINGW and actually check for SIGPIPE outside of MINGW.
The wait_or_whine() is only called with a true "in_signal" from from
finish_command_in_signal(), which in turn is only used in pager.c.
The "in_signal && !WIFEXITED(status)" case is not covered by
tests. Let's log the default -1 in that case for good measure.
1. The incorrect logging of the exit code in was seemingly copy/pasted
into finish_command_in_signal() in ee4512ed481 (trace2: create new
combined trace facility, 2019-02-22)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add braces to an "if" block in the wait_or_whine() function. This
isn't needed now, but will make a subsequent commit easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests for how git behaves when the pager itself exits with
non-zero, as well as for us exiting with 141 when we're killed with
SIGPIPE due to the pager not consuming its output.
There is some recent discussion[1] about these semantics, but aside
from what we want to do in the future, we should have a test for the
current behavior.
This test construct is stolen from 7559a1be8a0 (unblock and unignore
SIGPIPE, 2014-09-18). The reason not to make the test itself depend on
the MINGW prerequisite is to make a subsequent commit easier to read.
1. https://lore.kernel.org/git/87o8h4omqa.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the wait_for_pager() function. Since 507d7804c0b (pager:
don't use unsafe functions in signal handlers, 2015-09-04) the
wait_for_pager() and wait_for_pager_atexit() callers diverged on more
than they shared.
Let's extract the common code into a new close_pager_fds() helper, and
move the parts unique to the only to callers to those functions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow-up fixes and improvements to ab/mailmap topic.
* ab/mailmap-fixup:
t4203: make blame output massaging more robust
mailmap doc: use correct environment variable 'GIT_WORK_TREE'
t4203: stop losing return codes of git commands
test-lib-functions.sh: fix usage for test_commit()
|
|
Abstract accesses to in-core revindex that allows enumerating
objects stored in a packfile in the order they appear in the pack,
in preparation for introducing an on-disk precomputed revindex.
* tb/pack-revindex-api: (21 commits)
for_each_object_in_pack(): clarify pack vs index ordering
pack-revindex.c: avoid direct revindex access in 'offset_to_pack_pos()'
pack-revindex: hide the definition of 'revindex_entry'
pack-revindex: remove unused 'find_revindex_position()'
pack-revindex: remove unused 'find_pack_revindex()'
builtin/gc.c: guess the size of the revindex
for_each_object_in_pack(): convert to new revindex API
unpack_entry(): convert to new revindex API
packed_object_info(): convert to new revindex API
retry_bad_packed_offset(): convert to new revindex API
get_delta_base_oid(): convert to new revindex API
rebuild_existing_bitmaps(): convert to new revindex API
try_partial_reuse(): convert to new revindex API
get_size_by_pos(): convert to new revindex API
show_objects_for_type(): convert to new revindex API
bitmap_position_packfile(): convert to new revindex API
check_object(): convert to new revindex API
write_reused_pack_verbatim(): convert to new revindex API
write_reused_pack_one(): convert to new revindex API
write_reuse_object(): convert to new revindex API
...
|
|
Update the Code-of-conduct to version 2.0 from the upstream (we've
been using version 1.4).
* ab/coc-update-to-2.0:
CoC: update to version 2.0 + local changes
CoC: explicitly take any whitespace breakage
CoC: Update word-wrapping to match upstream
|
|
Introduce two new ways to feed configuration variable-value pairs
via environment variables, and tweak the way GIT_CONFIG_PARAMETERS
encodes variable/value pairs to make it more robust.
* ps/config-env-pairs:
config: allow specifying config entries via envvar pairs
environment: make `getenv_safe()` a public function
config: store "git -c" variables using more robust format
config: parse more robust format in GIT_CONFIG_PARAMETERS
config: extract function to parse config pairs
quote: make sq_dequote_step() a public function
config: add new way to pass config via `--config-env`
git: add `--super-prefix` to usage string
|
|
A bit of code refactoring.
* cc/write-promisor-file:
pack-write: die on error in write_promisor_file()
fetch-pack: refactor writing promisor file
fetch-pack: rename helper to create_promisor_file()
|
|
"git bundle" learns "--stdin" option to read its refs from the
standard input. Also, it now does not lose refs whey they point
at the same object.
* jx/bundle:
bundle: arguments can be read from stdin
bundle: lost objects when removing duplicate pendings
test: add helper functions for git-bundle
|
|
Clean-up docs, codepaths and tests around mailmap.
* ab/mailmap: (22 commits)
shortlog: remove unused(?) "repo-abbrev" feature
mailmap doc + tests: document and test for case-insensitivity
mailmap tests: add tests for empty "<>" syntax
mailmap tests: add tests for whitespace syntax
mailmap tests: add a test for comment syntax
mailmap doc + tests: add better examples & test them
tests: refactor a few tests to use "test_commit --append"
test-lib functions: add an --append option to test_commit
test-lib functions: add --author support to test_commit
test-lib functions: document arguments to test_commit
test-lib functions: expand "test_commit" comment template
mailmap: test for silent exiting on missing file/blob
mailmap tests: get rid of overly complex blame fuzzing
mailmap tests: add a test for "not a blob" error
mailmap tests: remove redundant entry in test
mailmap tests: improve --stdin tests
mailmap tests: modernize syntax & test idioms
mailmap tests: use our preferred whitespace syntax
mailmap doc: start by mentioning the comment syntax
check-mailmap doc: note config options
...
|
|
"git fetch" learns to treat ref updates atomically in all-or-none
fashion, just like "git push" does, with the new "--atomic" option.
* ps/fetch-atomic:
fetch: implement support for atomic reference updates
fetch: allow passing a transaction to `s_update_ref()`
fetch: refactor `s_update_ref` to use common exit path
fetch: use strbuf to format FETCH_HEAD updates
fetch: extract writing to FETCH_HEAD
|
|
When more than one commit with the same patch ID appears on one
side, "git log --cherry-pick A...B" did not exclude them all when a
commit with the same patch ID appears on the other side. Now it
does.
* jk/log-cherry-pick-duplicate-patches:
patch-ids: handle duplicate hashmap entries
|
|
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
|
|
After expiring a reflog and making a single commit, the reflog for
the branch would record a single entry that knows both @{0} and
@{1}, but we failed to answer "what commit were we on?", i.e. @{1}
* dl/reflog-with-single-entry:
refs: allow @{n} to work with n-sized reflog
refs: factor out set_read_ref_cutoffs()
|
|
"git diff" showed a submodule working tree with untracked cruft as
"Submodule commit <objectname>-dirty", but a natural expectation is
that the "-dirty" indicator would align with "git describe --dirty",
which does not consider having untracked files in the working tree
as source of dirtiness. The inconsistency has been fixed.
* sj/untracked-files-in-submodule-directory-is-not-dirty:
diff: do not show submodule with untracked files as "-dirty"
|
|
Warn loudly when the "pack-redundant" command, which has been left
stale with almost unusable performance issues, gets used, as we no
longer want to recommend its use (instead just "repack -d" instead).
* jc/deprecate-pack-redundant:
pack-redundant: gauge the usage before proposing its removal
|
|
Newline characters in the host and path part of git:// URL are
now forbidden.
* jk/forbid-lf-in-git-url:
fsck: reject .gitmodules git:// urls with newlines
git_connect_git(): forbid newlines in host and path
|
|
The implementation of "git branch --sort" wrt the detached HEAD
display has always been hacky, which has been cleaned up.
* ab/branch-sort:
branch: show "HEAD detached" first under reverse sort
branch: sort detached HEAD based on a flag
ref-filter: move ref_sorting flags to a bitfield
ref-filter: move "cmp_fn" assignment into "else if" arm
ref-filter: add braces to if/else if/else chain
branch tests: add to --sort tests
branch: change "--local" to "--list" in comment
|
|
File-level rename detection updates.
* en/diffcore-rename:
diffcore-rename: remove unnecessary duplicate entry checks
diffcore-rename: accelerate rename_dst setup
diffcore-rename: simplify and accelerate register_rename_src()
t4058: explore duplicate tree entry handling in a bit more detail
t4058: add more tests and documentation for duplicate tree entry handling
diffcore-rename: reduce jumpiness in progress counters
diffcore-rename: simplify limit check
diffcore-rename: avoid usage of global in too_many_rename_candidates()
diffcore-rename: rename num_create to num_destinations
|
|
Code clean-up.
* ma/more-opaque-lock-file:
read-cache: try not to peek into `struct {lock_,temp}file`
refs/files-backend: don't peek into `struct lock_file`
midx: don't peek into `struct lock_file`
commit-graph: don't peek into `struct lock_file`
builtin/gc: don't peek into `struct lock_file`
|
|
Rename detection is added to the "ORT" merge strategy.
* en/merge-ort-3:
merge-ort: add implementation of type-changed rename handling
merge-ort: add implementation of normal rename handling
merge-ort: add implementation of rename collisions
merge-ort: add implementation of rename/delete conflicts
merge-ort: add implementation of both sides renaming differently
merge-ort: add implementation of both sides renaming identically
merge-ort: add basic outline for process_renames()
merge-ort: implement compare_pairs() and collect_renames()
merge-ort: implement detect_regular_renames()
merge-ort: add initial outline for basic rename detection
merge-ort: add basic data structures for handling renames
|
|
"git mktag" validates its input using its own rules before writing
a tag object---it has been updated to share the logic with "git
fsck".
* ab/mktag: (23 commits)
mktag: add a --[no-]strict option
mktag: mark strings for translation
mktag: convert to parse-options
mktag: allow omitting the header/body \n separator
mktag: allow turning off fsck.extraHeaderEntry
fsck: make fsck_config() re-usable
mktag: use fsck instead of custom verify_tag()
mktag: use puts(str) instead of printf("%s\n", str)
mktag: remove redundant braces in one-line body "if"
mktag: use default strbuf_read() hint
mktag tests: test verify_object() with replaced objects
mktag tests: improve verify_object() test coverage
mktag tests: test "hash-object" compatibility
mktag tests: stress test whitespace handling
mktag tests: run "fsck" after creating "mytag"
mktag tests: don't create "mytag" twice
mktag tests: don't redirect stderr to a file needlessly
mktag tests: remove needless SHA-1 hardcoding
mktag tests: use "test_commit" helper
mktag tests: don't needlessly use a subshell
...
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix for procedure to building CI test environment for mac.
* jc/macos-install-dependencies-fix:
ci/install-depends: attempt to fix "brew cask" stuff
|
|
Doc update.
* tb/local-clone-race-doc:
Documentation/git-clone.txt: document race with --local
|
|
Doc update.
* bc/doc-status-short:
docs: rephrase and clarify the git status --short format
|
|
Text encoding fix for "git p4".
* dl/p4-encode-after-kw-expansion:
git-p4: fix syncing file types with pattern
|
|
Comments update.
* ab/gettext-charset-comment-fix:
gettext.c: remove/reword a mostly-useless comment
Makefile: remove a warning about old GETTEXT_POISON flag
|
|
Doc update.
* ug/doc-lose-dircache:
doc: remove "directory cache" from man pages
|
|
Test fix.
* ad/t4129-setfacl-target-fix:
t4129: fix setfacl-related permissions failure
|
|
Test fix.
* jk/t5516-deflake:
t5516: loosen "not our ref" error check
|
|
Doc update.
* vv/send-email-with-less-secure-apps-access:
git-send-email.txt: mention less secure app access with Gmail
|
|
Fix 2.29 regression where "git mergetool --tool-help" fails to list
all the available tools.
* pb/mergetool-tool-help-fix:
mergetool--lib: fix '--tool-help' to correctly show available tools
|
|
"git for-each-repo --config=<var> <cmd>" should not run <cmd> for
any repository when the configuration variable <var> is not defined
even once.
* ds/for-each-repo-noopfix:
for-each-repo: do nothing on empty config
|
|
Doc update.
* jc/sign-off:
SubmittingPatches: tighten wording on "sign-off" procedure
|
|
Some tests expect that "ls -l" output has either '-' or 'x' for
group executable bit, but setgid bit can be inherited from parent
directory and make these fields 'S' or 's' instead, causing test
failures.
* mt/t4129-with-setgid-dir:
t4129: don't fail if setgid is set in the test directory
|
|
Follow-up on the "maintenance part-3" which introduced scheduled
maintenance tasks to support platforms whose native scheduling
methods are not 'cron'.
* ds/maintenance-part-4:
maintenance: use Windows scheduled tasks
maintenance: use launchctl on macOS
maintenance: include 'cron' details in docs
maintenance: extract platform-specific scheduling
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bash completion (in contrib/) update to make it easier for
end-users to add completion for their custom "git" subcommands.
* fc/completion-aliases-support:
completion: add proper public __git_complete
test: completion: add tests for __git_complete
completion: bash: improve function detection
completion: bash: add __git_have_func helper
|
|
"git stash" did not work well in a sparsely checked out working
tree.
* en/stash-apply-sparse-checkout:
stash: fix stash application in sparse-checkouts
stash: remove unnecessary process forking
t7012: add a testcase demonstrating stash apply bugs in sparse checkouts
|
|
Test update.
* ar/t6016-modernise:
t6016: move to lib-log-graph.sh framework
|
|
Clean up option descriptions in "git cmd --help".
* zh/arg-help-format:
builtin/*: update usage format
parse-options: format argh like error messages
|
|
Test fix.
* nk/perf-fsmonitor-cleanup:
p7519: allow running without watchman prereq
|
|
The topological walk codepath is covered by new trace2 stats.
* ds/trace2-topo-walk:
revision: trace topo-walk statistics
|
|
Diagnose command line error of "git rebase" early.
* rs/rebase-commit-validation:
rebase: verify commit parameter
|
|
Retire more names with "sha1" in it.
* ma/sha1-is-a-hash:
hash-lookup: rename from sha1-lookup
sha1-lookup: rename `sha1_pos()` as `hash_pos()`
object-file.c: rename from sha1-file.c
object-name.c: rename from sha1-name.c
|
Jeff King
Ævar Arnfjörð Bjarmason
Junio C Hamano