| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some recent optimizations have been added to pack-objects to reduce
memory usage and some code paths are split into two: one for common
use cases and one for rare ones. Make sure the rare cases are tested
with Travis since it requires manual test configuration that is
unlikely to be done by developers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previous patches leave lots of holes and padding in this struct. This
patch reorders the members and shrinks the struct down to 80 bytes
(from 136 bytes on 64-bit systems, before any field shrinking is done)
with 16 bits to spare (and a couple more in in_pack_header_size when
we really run out of bits).
This is the last in a series of memory reduction patches (see
"pack-objects: a bit of document about struct object_entry" for the
first one).
Overall they've reduced repack memory size on linux-2.6.git from
3.747G to 3.424G, or by around 320M, a decrease of 8.5%. The runtime
of repack has stayed the same throughout this series. Ævar's testing
on a big monorepo he has access to (bigger than linux-2.6.git) has
shown a 7.9% reduction, so the overall expected improvement should be
somewhere around 8%.
See 87po42cwql.fsf@evledraar.gmail.com on-list
(https://public-inbox.org/git/87po42cwql.fsf@evledraar.gmail.com/) for
more detailed numbers and a test script used to produce the numbers
cited above.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allowing a delta size of 64 bits is crazy. Shrink this field down to
20 bits with one overflow bit.
If we find an existing delta larger than 1MB, we do not cache
delta_size at all and will get the value from oe_size(), potentially
from disk if it's larger than 4GB.
Note, since DELTA_SIZE() is used in try_delta() code, it must be
thread-safe. Luckily oe_size() does guarantee this so we it is
thread-safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's very very rare that an uncompressed object is larger than 4GB
(partly because Git does not handle those large files very well to
begin with). Let's optimize it for the common case where object size
is smaller than this limit.
Shrink size field down to 31 bits and one overflow bit. If the size is
too large, we read it back from disk. As noted in the previous patch,
we need to return the delta size instead of canonical size when the
to-be-reused object entry type is a delta instead of a canonical one.
Add two compare helpers that can take advantage of the overflow
bit (e.g. if the file is 4GB+, chances are it's already larger than
core.bigFileThreshold and there's no point in comparing the actual
value).
Another note about oe_get_size_slow(). This function MUST be thread
safe because SIZE() macro is used inside try_delta() which may run in
parallel. Outside parallel code, no-contention locking should be dirt
cheap (or insignificant compared to i/o access anyway). To exercise
this code, it's best to run the test suite with something like
make test GIT_TEST_OE_SIZE=4
which forces this code on all objects larger than 3 bytes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While this field most of the time contains the canonical object size,
there is one case it does not: when we have found that the base object
of the delta in question is also to be packed, we will very happily
reuse the delta by copying it over instead of regenerating the new
delta.
"size" in this case will record the delta size, not canonical object
size. Later on in write_reuse_object(), we reconstruct the delta
header and "size" is used for this purpose. When this happens, the
"type" field contains a delta type instead of a canonical type.
Highlight this in the code since it could be tricky to see.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
sha1_object_info() in check_objects() may fail to locate an object in
the pack and return type OBJ_BAD. In that case, it will likely leave
the "size" field untouched. We delay error handling until later in
prepare_pack() though. Until then, do not touch "size" field.
This field should contain the default value zero, but we can't say
sha1_object_info() cannot damage it. This becomes more important later
when the object size may have to be retrieved back from the
(non-existing) pack.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We only cache deltas when it's smaller than a certain limit. This limit
defaults to 1000 but save its compressed length in a 64-bit field.
Shrink that field down to 20 bits, so you can only cache 1MB deltas.
Larger deltas must be recomputed at when the pack is written down.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These delta pointers always point to elements in the objects[] array
in packing_data struct. We can only hold maximum 4G of those objects
because the array size in nr_objects is uint32_t. We could use
uint32_t indexes to address these elements instead of pointers. On
64-bit architecture (8 bytes per pointer) this would save 4 bytes per
pointer.
Convert these delta pointers to indexes. Since we need to handle NULL
pointers as well, the index is shifted by one [1].
[1] This means we can only index 2^32-2 objects even though nr_objects
could contain 2^32-1 objects. It should not be a problem in
practice because when we grow objects[], nr_alloc would probably
blow up long before nr_objects hits the wall.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using 8 bytes (on 64 bit arch) to store a pointer to a
pack. Use an index instead since the number of packs should be
relatively small.
This limits the number of packs we can handle to 1k. Since we can't be
sure people can never run into the situation where they have more than
1k pack files. Provide a fall back route for it.
If we find out they have too many packs, the new in_pack_by_idx[]
array (which has at most 1k elements) will not be used. Instead we
allocate in_pack[] array that holds nr_objects elements. This is
similar to how the optional in_pack_pos field is handled.
The new simple test is just to make sure the too-many-packs code path
is at least executed. The true test is running
make test GIT_TEST_FULL_IN_PACK_ARRAY=1
to take advantage of other special case tests.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This field is only need for pack-bitmap, which is an optional
feature. Move it to a separate array that is only allocated when
pack-bitmap is used (like objects[], it is not freed, since we need it
until the end of the process)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because of struct packing from now on we can only handle max depth
4095 (or even lower when new booleans are added in this struct). This
should be ok since long delta chain will cause significant slow down
anyway.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An extra field type_valid is added to carry the equivalent of OBJ_BAD
in the original "type" field. in_pack_type always contains a valid
type so we only need 3 bits for it.
A note about accepting OBJ_NONE as "valid" type. The function
read_object_list_from_stdin() can pass this value [1] and it
eventually calls create_object_entry() where current code skip setting
"type" field if the incoming type is zero. This does not have any bad
side effects because "type" field should be memset()'d anyway.
But since we also need to set type_valid now, skipping oe_set_type()
leaves type_valid zero/false, which will make oe_type() return
OBJ_BAD, not OBJ_NONE anymore. Apparently we do care about OBJ_NONE in
prepare_pack(). This switch from OBJ_NONE to OBJ_BAD may trigger
fatal: unable to get type of object ...
Accepting OBJ_NONE [2] does sound wrong, but this is how it is has
been for a very long time and I haven't time to dig in further.
[1] See 5c49c11686 (pack-objects: better check_object() performances -
2007-04-16)
[2] 21666f1aae (convert object type handling from a string to a number
- 2007-02-26)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The role of this comment block becomes more important after we shuffle
fields around to shrink this struct. It will be much harder to see what
field is related to what.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While at there, document about this special mode when running the test
suite.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'svn/authors-prog-2' of git://bogomips.org/git-svn:
git-svn: allow empty email-address using authors-prog and authors-file
git-svn: search --authors-prog in PATH too
|
|
This reverts commit e4bb62fa1eeee689744b413e29a50b4d1dae6886, reversing
changes made to 468165c1d8a442994a825f3684528361727cd8c0.
The topic appears to inflict severe regression in renaming merges,
even though the promise of it was that it would improve them.
We do not yet know which exact change in the topic was wrong, but in
the meantime, let's play it safe and revert it out of 'master'
before real Git-using projects are harmed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When credential helper exits very quickly without reading its
input, it used to cause Git to die with SIGPIPE, which has been
fixed.
* eb/cred-helper-ignore-sigpipe:
credential: ignore SIGPIPE when writing to credential helpers
|
|
When built with more recent cURL, GIT_SSL_VERSION can now specify
"tlsv1.3" as its value.
* lv/tls-1.3:
http: allow use of TLS 1.3
|
|
Test cleanup.
* pk/test-avoid-pipe-hiding-exit-status:
test: avoid pipes in git related commands for test
|
|
"git submodule status" misbehaved on a submodule that has been
removed from the working tree.
* rs/status-with-removed-submodule:
submodule: check for NULL return of get_submodule_ref_store()
|
|
Small test-helper programs have been consolidated into a single
binary.
* nd/combined-test-helper: (36 commits)
t/helper: merge test-write-cache into test-tool
t/helper: merge test-wildmatch into test-tool
t/helper: merge test-urlmatch-normalization into test-tool
t/helper: merge test-subprocess into test-tool
t/helper: merge test-submodule-config into test-tool
t/helper: merge test-string-list into test-tool
t/helper: merge test-strcmp-offset into test-tool
t/helper: merge test-sigchain into test-tool
t/helper: merge test-sha1-array into test-tool
t/helper: merge test-scrap-cache-tree into test-tool
t/helper: merge test-run-command into test-tool
t/helper: merge test-revision-walking into test-tool
t/helper: merge test-regex into test-tool
t/helper: merge test-ref-store into test-tool
t/helper: merge test-read-cache into test-tool
t/helper: merge test-prio-queue into test-tool
t/helper: merge test-path-utils into test-tool
t/helper: merge test-online-cpus into test-tool
t/helper: merge test-mktemp into test-tool
t/helper: merge (unused) test-mergesort into test-tool
...
|
|
Refactoring of the internal global data structure continues.
* sb/packfiles-in-repository:
packfile: keep prepare_packed_git() private
packfile: allow find_pack_entry to handle arbitrary repositories
packfile: add repository argument to find_pack_entry
packfile: allow reprepare_packed_git to handle arbitrary repositories
packfile: allow prepare_packed_git to handle arbitrary repositories
packfile: allow prepare_packed_git_one to handle arbitrary repositories
packfile: add repository argument to reprepare_packed_git
packfile: add repository argument to prepare_packed_git
packfile: add repository argument to prepare_packed_git_one
packfile: allow install_packed_git to handle arbitrary repositories
packfile: allow rearrange_packed_git to handle arbitrary repositories
packfile: allow prepare_packed_git_mru to handle arbitrary repositories
|
|
Refactoring the internal global data structure to make it possible
to open multiple repositories, work with and then close them.
Rerolled by Duy on top of a separate preliminary clean-up topic.
The resulting structure of the topics looked very sensible.
* sb/object-store: (27 commits)
sha1_file: allow sha1_loose_object_info to handle arbitrary repositories
sha1_file: allow map_sha1_file to handle arbitrary repositories
sha1_file: allow map_sha1_file_1 to handle arbitrary repositories
sha1_file: allow open_sha1_file to handle arbitrary repositories
sha1_file: allow stat_sha1_file to handle arbitrary repositories
sha1_file: allow sha1_file_name to handle arbitrary repositories
sha1_file: add repository argument to sha1_loose_object_info
sha1_file: add repository argument to map_sha1_file
sha1_file: add repository argument to map_sha1_file_1
sha1_file: add repository argument to open_sha1_file
sha1_file: add repository argument to stat_sha1_file
sha1_file: add repository argument to sha1_file_name
sha1_file: allow prepare_alt_odb to handle arbitrary repositories
sha1_file: allow link_alt_odb_entries to handle arbitrary repositories
sha1_file: add repository argument to prepare_alt_odb
sha1_file: add repository argument to link_alt_odb_entries
sha1_file: add repository argument to read_info_alternates
sha1_file: add repository argument to link_alt_odb_entry
sha1_file: add raw_object_store argument to alt_odb_usable
pack: move approximate object count to object store
...
|
|
Test helper update.
* jc/test-must-be-empty:
test_must_be_empty: simplify file existence check
|
|
Perf-test update.
* cc/perf-aggregate-sort:
perf/aggregate: add --sort-by=regression option
perf/aggregate: add display_dir()
|
|
Doc updates.
* ab/doc-hash-brokenness:
doc hash-function-transition: clarify what SHAttered means
doc hash-function-transition: clarify how older gits die on NewHash
|
|
Tests that rely on the exact hardcoded values of object names have
been updated in preparation for hash function migration.
* bc/hash-independent-tests:
t2107: abstract away SHA-1-specific constants
t2101: abstract away SHA-1-specific constants
t2101: modernize test style
t2020: abstract away SHA-1 specific constants
t1507: abstract away SHA-1-specific constants
t1411: abstract away SHA-1-specific constants
t1405: sort reflog entries in a hash-independent way
t1300: abstract away SHA-1-specific constants
t1304: abstract away SHA-1-specific constants
t1011: abstract away SHA-1-specific constants
|
|
* ab/drop-contrib-examples:
Remove contrib/examples/*
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ys/bisect-object-id-missing-conversion-fix:
bisect: use oid_to_hex() for converting object_id hashes to hex strings
|
|
when refs that do not point at committish are given, "git
filter-branch" gave a misleading error messages. This has been
corrected.
* yk/filter-branch-non-committish-refs:
filter-branch: fix errors caused by refs that point at non-committish
|
|
Code cleanup.
* nd/trace-with-env:
run-command: use strbuf_addstr() for adding a string to a strbuf
|
|
The mechanism to use parse-options API to automate the command line
completion continues to get extended and polished.
* nd/parseopt-completion-more:
completion: use __gitcomp_builtin in _git_cherry
completion: use __gitcomp_builtin in _git_ls_tree
completion: delete option-only completion commands
completion: add --option completion for most builtin commands
completion: factor out _git_xxx calling code
completion: mention the oldest version we need to support
git.c: add hidden option --list-parseopt-builtins
git.c: move cmd_struct declaration up
|
|
Code to find the length to uniquely abbreviate object names based
on packfile content, which is a relatively recent addtion, has been
optimized to use the same fan-out table.
* ds/bsearch-hash:
sha1_name: use bsearch_pack() in unique_in_pack()
sha1_name: use bsearch_pack() for abbreviations
packfile: define and use bsearch_pack()
sha1_name: convert struct min_abbrev_data to object_id
|
|
Code clean-up.
* ws/rebase-p:
rebase: remove merges_option and a blank line
rebase: remove unused code paths from git_rebase__interactive__preserve_merges
rebase: remove unused code paths from git_rebase__interactive
rebase: add and use git_rebase__interactive__preserve_merges
rebase: extract functions out of git_rebase__interactive
rebase: reindent function git_rebase__interactive
rebase: update invocation of rebase dot-sourced scripts
rebase-interactive: simplify pick_on_preserving_merges
|
|
"diff-highlight" filter (in contrib/) learned to undertand "git log
--graph" output better.
* jk/diff-highlight-graph-fix:
diff-highlight: detect --graph by indent
diff-highlight: use flush() helper consistently
diff-highlight: test graphs with --color
diff-highlight: test interleaved parallel lines of history
diff-highlight: prefer "echo" to "cat" in tests
diff-highlight: use test_tick in graph test
diff-highlight: correct test graph diagram
|
|
Code clean-up for the "repository" abstraction.
* nd/remove-ignore-env-field:
repository.h: add comment and clarify repo_set_gitdir
repository: delete ignore_env member
sha1_file.c: move delayed getenv(altdb) back to setup_git_env()
repository.c: delete dead functions
repository.c: move env-related setup code back to environment.c
repository: initialize the_repository in main()
|
|
"git tag --contains no-such-commit" gave a full list of options
after giving an error message.
* ps/contains-id-error-message:
parse-options: do not show usage upon invalid option value
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash push -u -- <pathspec>" gave an unnecessary and confusing
error message when there was no tracked files that match the
<pathspec>, which has been fixed.
* tg/stash-untracked-with-pathspec-fix:
stash: drop superfluos pathspec parameter
stash push -u: don't create empty stash
stash push: avoid printing errors
stash: fix nonsense pipeline
|
|
The way "git worktree prune" worked internally has been simplified,
by assuming how "git worktree move" moves an existing worktree to a
different place.
* nd/worktree-prune:
worktree prune: improve prune logic when worktree is moved
worktree: delete dead code
gc.txt: more details about what gc does
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (36 commits)
convert: convert to struct object_id
sha1_file: introduce a constant for max header length
Convert lookup_replace_object to struct object_id
sha1_file: convert read_sha1_file to struct object_id
sha1_file: convert read_object_with_reference to object_id
tree-walk: convert tree entry functions to object_id
streaming: convert istream internals to struct object_id
tree-walk: convert get_tree_entry_follow_symlinks internals to object_id
builtin/notes: convert static functions to object_id
builtin/fmt-merge-msg: convert remaining code to object_id
sha1_file: convert sha1_object_info* to object_id
Convert remaining callers of sha1_object_info_extended to object_id
packfile: convert unpack_entry to struct object_id
sha1_file: convert retry_bad_packed_offset to struct object_id
sha1_file: convert assert_sha1_type to object_id
builtin/mktree: convert to struct object_id
streaming: convert open_istream to use struct object_id
sha1_file: convert check_sha1_signature to struct object_id
sha1_file: convert read_loose_object to use struct object_id
builtin/index-pack: convert struct ref_delta_entry to object_id
...
|
|
"git shortlog cruft" aborted with a BUG message when run outside a
Git repository. The command has been taught to complain about
extra and unwanted arguments on its command line instead in such a
case.
* ma/shortlog-revparse:
shortlog: disallow left-over arguments outside repo
shortlog: add usage-string for stdin-reading
git-shortlog.txt: reorder usages
|
|
The build procedure learned to optionally use symbolic links
(instead of hardlinks and copies) to install "git-foo" for built-in
commands, whose binaries are all identical.
* ab/install-symlinks:
Makefile: optionally symlink libexec/git-core binaries to bin/git
Makefile: add a gitexecdir_relative variable
Makefile: fix broken bindir_relative variable
|
|
"git filter-branch" learned to use a different exit code to allow
the callers to tell the case where there was no new commits to
rewrite from other error cases.
* ml/filter-branch-no-op-error:
filter-branch: return 2 when nothing to rewrite
|
|
Git can be built to use either v1 or v2 of the PCRE library, and so
far, the build-time configuration USE_LIBPCRE=YesPlease instructed
the build procedure to use v1, but now it means v2. USE_LIBPCRE1
and USE_LIBPCRE2 can be used to explicitly choose which version to
use, as before.
* ab/pcre-v2:
Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1
configure: detect redundant --with-libpcre & --with-libpcre1
configure: fix a regression in PCRE v1 detection
|
|
A "git fetch" from a repository with insane number of refs into a
repository that is already up-to-date still wasted too many cycles
making many lstat(2) calls to see if these objects at the tips
exist as loose objects locally. These lstat(2) calls are optimized
away by enumerating all loose objects beforehand.
It is unknown if the new strategy negatively affects existing use
cases, fetching into a repository with many loose objects from a
repository with small number of refs.
* ti/fetch-everything-local-optim:
fetch-pack.c: use oidset to check existence of loose object
|
|
Rename detection logic in "diff" family that is used in "merge" has
learned to guess when all of x/a, x/b and x/c have moved to z/a,
z/b and z/c, it is likely that x/d added in the meantime would also
want to move to z/d by taking the hint that the entire directory
'x' moved to 'z'. A bug causing dirty files involved in a rename
to be overwritten during merge has also been fixed as part of this
work.
* en/rename-directory-detection: (29 commits)
merge-recursive: ensure we write updates for directory-renamed file
merge-recursive: avoid spurious rename/rename conflict from dir renames
directory rename detection: new testcases showcasing a pair of bugs
merge-recursive: fix remaining directory rename + dirty overwrite cases
merge-recursive: fix overwriting dirty files involved in renames
merge-recursive: avoid clobbering untracked files with directory renames
merge-recursive: apply necessary modifications for directory renames
merge-recursive: when comparing files, don't include trees
merge-recursive: check for file level conflicts then get new name
merge-recursive: add computation of collisions due to dir rename & merging
merge-recursive: check for directory level conflicts
merge-recursive: add get_directory_renames()
merge-recursive: make a helper function for cleanup for handle_renames
merge-recursive: split out code for determining diff_filepairs
merge-recursive: make !o->detect_rename codepath more obvious
merge-recursive: fix leaks of allocated renames and diff_filepairs
merge-recursive: introduce new functions to handle rename logic
merge-recursive: move the get_renames() function
directory rename detection: tests for handling overwriting dirty files
directory rename detection: tests for handling overwriting untracked files
...
|
Nguyễn Thái Ngọc Duy
Junio C Hamano