| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When update_local_ref() refuses to update a branch head due to
fast-forward check, it was not propagated properly in the call
chain and the command did not exit with non-zero status as a
result.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some versions of the SVN libraries cause die() to exit with 255,
and 40cf043389ef4cdf3e56e7c4268d6f302e387fa0 tightened up
test_expect_failure to reject return values >128.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Sometimes users are given only read access to a subtree inside a
repository, and git-svn could not read log information (and thus
fetch commits) when connecting a session to the root of the
repository. We now start an SVN::Ra session with the full URL
of what we're tracking, and not the repository root as before.
This change was made much easier with a cleanup of
repo_path_split() usage as well as improving the accounting of
authentication batons.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes "git branch -D other_branch" work even when HEAD
points at a yet-to-be-born branch.
Earlier, we checked the HEAD ref for the purpose of "subset"
check even when the deletion was forced (i.e. not -d but -D).
Because of this, you cannot delete a branch even with -D while
on a yet-to-be-born branch.
With this change, the following sequence that now works:
mkdir newdir && cd newdir
git init-db
git fetch -k $other_repo refs/heads/master:refs/heads/othre
# oops, typo
git branch other othre
git branch -D othre
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The new -v option makes git-branch show the abbreviated sha1 + subjectline
for each branch.
Additionally, minimum abbreviation length can be specified with
--abbrev=<length>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Most notably, the original code first copied refs/remotes/ that
remote side had to local, and overwrote them by mapping refs/heads/
from the remote when a dumb protocol transport was used.
This makes the clone behaviour by dumb protocol in line with the
git native and rsync transports.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It seems that gitweb tries to consistently use chomp without parentheses
around its operands, but there were two places that said "chomp($var);".
Let's be consistent.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Commit messages had SPC replaced with entity;
make it so also in tag message (tag comment).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jn/web:
gitweb: Finish restoring "blob" links in git_difftree_body
gitweb: Refactor feed generation, make output prettier, add Atom feed
gitweb: Add an option to href() to return full URL
gitweb: New improved formatting of chunk header in diff
gitweb: Default to $hash_base or HEAD for $hash in "commit" and "commitdiff"
gitweb: Buffer diff header to deal with split patches + git_patchset_body refactoring
gitweb: Protect against possible warning in git_commitdiff
|
|
* pb/diffroot:
config option log.showroot to show the diff of root commits
|
|
* jc/pack-heuristics:
pack-objects: tweak "do not even attempt delta" heuristics
|
|
* jc/numstat:
apply --numstat: mark binary diffstat with - -, not 0 0
|
|
* ap/branch-ref-display:
Add support to git-branch to show local and remote branches
|
|
* ap/prune:
Typefix builtin-prune.c::prune_object()
Improve git-prune -n output
|
|
It passed (const char*) to a function that took a (char *); the
buffer itself was of course writable, so pass the buffer itself.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows one to see a root commit as a diff in commands like git-log,
git-show and git-whatchanged.
Signed-off-by: Peter Baumann <Peter.B.Baumannn@stud.informatik.uni-erlangen.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/upload-pack:
upload-pack: stop the other side when they have more roots than we do.
|
|
This is mostly gleaned off SVN::Mirror, with added support for
--no-auth-cache and --config-dir.
Even with this patch, git-svn does not yet support repositories
where the user only has partial read permissions.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch adds support for 'proxy' and 'proxyport' connection options
when using the pserver method for the CVS Root.
It has been tested with a Squid 2.5.x proxy server.
Quoting from the CVS info manual:
The `gserver' and `pserver' connection methods all accept optional
method options, specified as part of the METHOD string, like so:
:METHOD[;OPTION=ARG...]:
Currently, the only two valid connection options are `proxy', which
takes a hostname as an argument, and `proxyport', which takes a port
number as an argument. These options can be used to connect via an HTTP
tunnel style web proxy. For example, to connect pserver via a web proxy
at www.myproxy.net and port 8000, you would use a method of:
:pserver;proxy=www.myproxy.net;proxyport=8000:
*NOTE: The rest of the connection string is required to connect to
the server as noted in the upcoming sections on password authentication,
gserver and kserver. The example above would only modify the METHOD
portion of the repository name.*
PROXY must be supplied to connect to a CVS server via a proxy
server, but PROXYPORT will default to port 8080 if not supplied.
PROXYPORT may also be set via the CVS_PROXY_PORT environment variable.
Signed-off-by: Iñaki Arenaza <iarenuno@eteo.mondragon.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We've talked about this for quite some time on the list, and it
is a sane thing to do for a repository with an associcated
working tree.
For somebody who wants to use the traditional layout, there is a
backward compatibility option --use-immingled-remote, but it is
expected to be removed before the next major release.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This changes the refname matching logic used to decide which ref
is updated with git-send-pack. We used to error out when
pushing 'master' when the other end has both 'master' branch and
a tracking branch 'remotes/$name/master' but with this, 'master'
matches only 'refs/heads/master' when both and no other 'master'
exist.
Pushing 'foo' when both heads/foo and tags/foo exist at the
remote end is still considered an error and you would need to
disambiguate between them by being more explicit.
When neither heads/foo nor tags/foo exists at the remote,
pushing 'foo' when there is only remotes/origin/foo is not
ambiguous, while it still is ambiguous when there are more than
one such weaker match (remotes/origin/foo and remotes/alt/foo,
for example).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In xemit.c:xdl_emit_diff() a buffer for showing the function name as
commentary is allocated; this buffer was 40 characters. This is a bit
small; particularly for C++ function names where there is often an
identical prefix (like void LongNamespace::LongClassName) on multiple
functions, which makes the context the same everywhere. In other words
the context is useless. This patch increases that buffer to 80
characters - which may still not be enough, but is better
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Using dcommit could cause the user to lose uncommitted changes
during the reset --hard operation, so change it to reset --mixed.
If dcommit chooses the rebase path, then git-rebase will already
error out when local changes are made.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
some SVN repositories have a revision 0 (committed by no author
and no date) when created; so when we need to ensure that we
check any revision variables are defined, and not just
non-zero.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
dcommit would unconditionally append "~1" to a commit in order
to generate a diff. Now we generate a meaningful error message
if we try to generate an impossible diff.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We can't rely on sizeof(struct zip_*) returning the sum of
all struct members. At least on ARM padding is added at the
end, as Gerrit Pape reported. This fixes the problem but
still lets the compiler do the summing by introducing
explicit padding at the end of the structs and then taking
its offset as the combined size of the preceding members.
As Junio correctly notes, the _end[] marker array's size
must be greater than zero for compatibility with compilers
other than gcc. The space wasted by the markers can safely
be neglected because we only have one instance of each
struct, i.e. in sum 3 wasted bytes on i386, and 0 on ARM. :)
We still rely on the compiler to not add padding between the
struct members, but that's reasonable given that all of them
are unsigned char arrays.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
An earlier commit f28b34a broke symlinks when trust-executable-bit
is not set because it incorrectly assumed that everything was a
regular file.
Reported by Juergen Ruehle.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Asciidoc-include it into the manuals for programs that use the
--pretty command-line option, for consistency among the docs.
This describes all the pretty-formats currently listed in the cmit_fmt
enum in commit.h, and also briefly describes the presence and format
of the 'Merge: ' line in some pretty formats.
There's a hedge that limiting your view of history can affect what
goes in the Merge: line, and that --abbrev/--no-abbrev do nothing to
the 'raw' format.
Signed-off-by: Chris Riddoch <chris@syntacticsugar.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Instead of storing a list of refnames in append_ref, a list of
structures is created. Each of these stores the refname and a
symbolic constant representing its type.
The creation of the list is filtered based on a command line
switch; no switch means "local branches only", "-r" means "remote
branches only" (as they always did); but now "-a" means "local
branches or remote branches".
As a side effect, the list is now not global, but allocated in
print_ref_list() where it used.
Also a memory leak is plugged, the memory allocated during the
list creation was never freed.
It lays a groundwork to also display tags, but the command being
'git branch' it is not currently used.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
prune_object() in show_only mode would previously just show the path to the
object that would be deleted. The path the object is stored in shouldn't be
shown to users, they only know about sha1 identifiers so show that instead.
Further, the sha1 alone isn't that useful for examining what is going to be
deleted. This patch also adds the object type to the output, which makes it
easy to pick out, say, the commits and use git-show to display them.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Rephrased a sentence in order to make more clear the concept of
pull . branch
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This tiny patch makes GIT compile again on HP-UX 11i.
[jc: The setlinebuf() is described as unportable to BSD before
4.2; it's not even in POSIX, while setvbuf() is in ISO C.]
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This finishes work started by commit 4777b0141a4812177390da4b6ebc9d40ac3da4b5
"gitweb: Restore object-named links in item lists"
by Petr Baudis. It brings back rest of "blob" links in difftree-raw
like part of "commit" and "commitdiff" views, namely in
git_difftree_body subroutine.
Now the td.link table cell has the following links:
* link to diff ("blobdiff" view) in "commit" view, if applicable
(there is no link to uninteresting creation/deletion diff), or
link to patch anchor in "commitdiff" view.
* link to current version of file ("blob" view), with the obvious
exception of file deletion, where it is link to the parent
version.
* link to "blame" view, if it is enabled, and file was not just
created (i.e. it has any history).
* link to history of the file ("history" view), again with sole
exception of the case of new file.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add support for more modern Atom web feed format. Both RSS and Atom
feeds are generated by git_feed subroutine to avoid code duplication;
git_rss and git_atom are thin wrappers around git_feed. Add links to
Atom feed in HTML header and in page footer (but not in OPML; we
should use APP, Atom Publishing Proptocol instead).
Allow for feed generation for branches other than current (HEAD)
branch, and for generation of feeds for file or directory history.
Do not use "pre ${\sub_returning_scalar(...)} post" trick, but join
strings instead: "pre " . sub_returning_scalar(...) . " post".
Use href(-full=>1, ...) instead of hand-crafting gitweb urls.
Make output prettier:
* Use title similar to the title of web page
* Use project description (if exists) for description/subtitle
* Do not add anything (committer name, commit date) to feed entry title
* Wrap the commit message in <pre>
* Make file names into an unordered list
* Add links (diff, conditional blame, history) to the file list.
In addition to the above points, the attached patch emits a
Last-Changed: HTTP response header field, and doesn't compute the feed
body if the HTTP request type was HEAD. This helps keep the web server
load down for well-behaved feed readers that check if the feed needs
updating.
If browser (feed reader) sent Accept: header, and it prefers 'text/xml' type
to 'application/rss+xml' (in the case of RSS feed) or 'application/atom+xml'
(in the case of Atom feed), then use 'text/xml' as content type.
Both RSS and Atom feeds validate at http://feedvalidator.org
and at http://validator.w3.org/feed/
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Andreas Fuchs <asf@boinkor.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
href subroutine by default generates absolute URL (generated using
CGI::url(-absolute=>1), and saved in $my_uri) using $my_uri as base;
add an option to generate full URL using $my_url as base.
New feature usage: href(..., -full=>1)
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If we have provided enough info, and diff is not combined diff,
and if provided diff line is chunk header, then:
* split chunk header into .chunk_info and .section span elements,
first containing proper chunk header, second section heading
(aka. which function), for separate styling: the proper chunk
header is on non-white background, section heading part uses
slightly lighter color.
* hyperlink from-file-range to starting line of from-file, if file
was not created.
* hyperlink to-file-range to starting line of to-file, if file
was not deleted.
Links are of invisible variety (and "list" class).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Set $hash parameter to $hash_base || "HEAD" if it is not set (if it is
not true to be more exact). This allows [hand-edited] URLs with 'action'
"commit" or "commitdiff" but without 'hash' parameter.
If there is 'h' (hash) parameter provided, then gitweb tries
to use this. HEAD is used _only_ if nether hash, nor hash_base
are provided, i.e. for URL like below
URL?p=project.git;a=commit
i.e. without neither 'h' nor 'hb'.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
refactoring
There are some cases when one line from "raw" git-diff output (raw format)
corresponds to more than one patch in the patchset git-diff output. To deal
with this buffer git diff header and extended diff header (everything up to
actual patch) to check from information from "index <hash>..<hash>" extended
header line if the patch corresponds to the same or next difftree raw line.
This could also be used to gather information needed for hyperlinking, and
used for printing gitweb quoted filenames, from extended diff header instead
of raw git-diff output.
While at it, refactor git_patchset_body subroutine from the event-driven,
AWK-like state-machine parsing to sequential parsing: for each patch
parse (and output) git diff header, parse extended diff header, parse two-line
from-file/to-file diff header, parse patch itself; patch ends with the end
of input [file] or the line matching m/^diff /.
For better understanding the code, there were added assertions in the
comments a la Carp::Assert module. Just in case there is commented out code
dealing with unexpected end of input (should not happen, hence commented
out).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We may read an undef from <$fd> and unconditionally chomping it
would result in a warning.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As discussed on git mailing list let's teach the reader about
the possiblity to have automatically signed off the commit running
the git-commit -s command
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
An earlier commit b37a562a added a check to see if the ref
points at a valid object (as a part of 'negative ref' support
which we currently do not use), but did so only while iterating
over both packed and loose refs, and forgot to apply the same
check while iterating over the remaining ones.
We might want to replace the "if null then omit it" check with
"eh --- what business does a 0{40} value have here?" complaint
later since we currently do not use negative refs, but that is
a separate issue.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This side-ports commit fd19f620 from Cogito, in which I fixed
exactly the same bug. Somehow nobody noticed this for a long
time in git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
For one, the documentation invalidly claimed that the paths have to be
absolute when that's not the case and in fact there is a very valid reason
not to use absolute paths (documented the reason as well).
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
HEAD was still described as a symlink instead of a symref.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I copied most of the text from git-status.txt.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch fixes a sparse warning about inaccurate_eof being a
"dubious one-bit signed bitfield", makes three more binary
variables members of this (now unsigned) bitfield and adds a
short comment to indicate the nature of two ternary variables.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Z_NULL is defined as 0, use a proper NULL pointer in its stead.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The declaration of discard_cache() in cache.h already has its "void".
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
inacurate -> inaccurate, sorry if it was a pun. ;-)
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Eric Wong
Lars Hjemli
Jakub Narebski
Peter Baumann
Iñaki Arenaza
Petr Baudis
Andy Parkins
René Scharfe
Chris Riddoch
Paolo Ciarrocchi
Michal Rokos