| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jn/submodule-core-worktree-revert:
Revert "Merge branch 'sb/submodule-core-worktree'"
|
|
The earlier attempt barfed when given a CONTENT_LENGTH that is
set to an empty string. RFC 3875 is fairly clear that in this
case we should not read any message body, but we've been reading
through to the EOF in previous versions (which did not even pay
attention to the environment variable), so keep that behaviour for
now in this late update.
* mk/http-backend-content-length:
http-backend: allow empty CONTENT_LENGTH
|
|
This reverts commit 7e25437d35a70791b345872af202eabfb3e1a8bc, reversing
changes made to 00624d608cc69bd62801c93e74d1ea7a7ddd6598.
v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to RFC3875, empty environment variable is equivalent to unset,
and for CONTENT_LENGTH it should mean zero body to read.
However, unset CONTENT_LENGTH is also used for chunked encoding to indicate
reading until EOF. At least, the test "large fetch-pack requests can be split
across POSTs" from t5551 starts faliing, if unset or empty CONTENT_LENGTH is
treated as zero length body. So keep the existing behavior as much as possible.
Add a test for the case.
Reported-By: Jelmer Vernooij <jelmer@jelmer.uk>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test linter code has learned that the end of here-doc mark
"EOF" can be quoted in a double-quote pair, not just in a
single-quote pair.
* es/chain-lint-more:
chainlint: match "quoted" here-doc tags
|
|
Portability fix.
* ab/portable-more:
tests: fix non-portable iconv invocation
tests: fix non-portable "${var:-"str"}" construct
tests: fix and add lint for non-portable grep --file
tests: fix version-specific portability issue in Perl JSON
tests: use shorter labels in chainlint.sed for AIX sed
tests: fix comment syntax in chainlint.sed for AIX sed
tests: fix and add lint for non-portable seq
tests: fix and add lint for non-portable head -c N
|
|
Build fix.
* es/freebsd-iconv-portability:
config.mak.uname: resolve FreeBSD iconv-related compilation warning
|
|
"git merge-base" in 2.19-rc1 has performance regression when the
(experimental) commit-graph feature is in use, which has been
mitigated.
* ds/commit-graph-lockfile-fix:
commit: don't use generation numbers if not needed
|
|
Recent addition of "directory rename" heuristics to the
merge-recursive backend makes the command susceptible to false
positives and false negatives. In the context of "git am -3",
which does not know about surrounding unmodified paths and thus
cannot inform the merge machinery about the full trees involved,
this risk is particularly severe. As such, the heuristic is
disabled for "git am -3" to keep the machinery "more stupid but
predictable".
* en/directory-renames-nothanks:
am: avoid directory rename detection when calling recursive merge machinery
merge-recursive: add ability to turn off directory rename detection
t3401: add another directory rename testcase for rebase and am
|
|
Recent "git rebase -i" update started to write bogusly formatted
author-script, with a matching broken reading code. These are
fixed.
* pw/rebase-i-author-script-fix:
sequencer: fix quoting in write_author_script
sequencer: handle errors from read_author_ident()
|
|
OLD_ICONV has long been needed by FreeBSD so config.mak.uname defines
it unconditionally. However, recent versions do not need it, and its
presence results in compilation warnings. Resolve this issue by defining
OLD_ICONV only for older FreeBSD versions.
Specifically, revision r281550[1], which is part of FreeBSD 11, removed
the need for OLD_ICONV, and r282275[2] back-ported that change to 10.2.
Versions prior to 10.2 do need it.
[1] https://github.com/freebsd/freebsd/commit/b0813ee288f64f677a2cebf7815754b027a8215b
[2] https://github.com/freebsd/freebsd/commit/b709ec868adb5170d09bc5a66b18d0e0d5987ab6
[es: commit message; tweak version check to distinguish 10.x versions]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 3afc679b "commit: use generations in paint_down_to_common()",
the queue in paint_down_to_common() was changed to use a priority
order based on generation number before commit date. This served
two purposes:
1. When generation numbers are present, the walk guarantees
correct topological relationships, regardless of clock skew in
commit dates.
2. It enables short-circuiting the walk when the min_generation
parameter is added in d7c1ec3e "commit: add short-circuit to
paint_down_to_common()". This short-circuit helps commands
like 'git branch --contains' from needing to walk to a merge
base when we know the result is false.
The commit message for 3afc679b includes the following sentence:
This change does not affect the number of commits that are
walked during the execution of paint_down_to_common(), only
the order that those commits are inspected.
This statement is incorrect. Because it changes the order in which
the commits are inspected, it changes the order they are added to
the queue, and hence can change the number of loops before the
queue_has_nonstale() method returns true.
This change makes a concrete difference depending on the topology
of the commit graph. For instance, computing the merge-base between
consecutive versions of the Linux kernel has no effect for versions
after v4.9, but 'git merge-base v4.8 v4.9' presents a performance
regression:
v2.18.0: 0.122s
v2.19.0-rc1: 0.547s
HEAD: 0.127s
To determine that this was simply an ordering issue, I inserted
a counter within the while loop of paint_down_to_common() and
found that the loop runs 167,468 times in v2.18.0 and 635,579
times in v2.19.0-rc1.
The topology of this case can be described in a simplified way
here:
v4.9
| \
| \
v4.8 \
| \ \
| \ |
... A B
| / /
| / /
|/__/
C
Here, the "..." means "a very long line of commits". By generation
number, A and B have generation one more than C. However, A and B
have commit date higher than most of the commits reachable from
v4.8. When the walk reaches v4.8, we realize that it has PARENT1
and PARENT2 flags, so everything it can reach is marked as STALE,
including A. B has only the PARENT1 flag, so is not STALE.
When paint_down_to_common() is run using
compare_commits_by_commit_date, A and B are removed from the queue
early and C is inserted into the queue. At this point, C and the
rest of the queue entries are marked as STALE. The loop then
terminates.
When paint_down_to_common() is run using
compare_commits_by_gen_then_commit_date, B is removed from the
queue only after the many commits reachable from v4.8 are explored.
This causes the loop to run longer. The reason for this regression
is simple: the queue order is intended to not explore a commit
until everything that _could_ reach that commit is explored. From
the information gathered by the original ordering, we have no
guarantee that there is not a commit D reachable from v4.8 that
can also reach B. We gained absolute correctness in exchange for
a performance regression.
The performance regression is probably the worse option, since
these incorrect results in paint_down_to_common() are rare. The
topology required for the performance regression are less rare,
but still require multiple merge commits where the parents differ
greatly in generation number. In our example above, the commit A
is as important as the commit B to demonstrate the problem, since
otherwise the commit C will sit in the queue as non-stale just as
long in both orders.
The solution provided uses the min_generation parameter to decide
if we should use generation numbers in our ordering. When
min_generation is equal to zero, it means that the caller has no
known cutoff for the walk, so we should rely on our commit-date
heuristic as before; this is the case with merge_bases_many().
When min_generation is non-zero, then the caller knows a valuable
cutoff for the short-circuit mechanism; this is the case with
remove_redundant() and in_merge_bases_many().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's say you have the following three trees, where Base is from one commit
behind either master or branch:
Base : bar_v1, foo/{file1, file2, file3}
branch: bar_v2, foo/{file1, file2}, goo/file3
master: bar_v3, foo/{file1, file2, file3}
Using git-am (or am-based rebase) to apply the changes from branch onto
master results in the following tree:
Result: bar_merged, goo/{file1, file2, file3}
This is not what users want; they did not rename foo/ -> goo/, they only
renamed one file within that directory. The reason this happens is am
constructs fake trees (via build_fake_ancestor()) of the following form:
Base_bfa : bar_v1, foo/file3
branch_bfa: bar_v2, goo/file3
Combining these two trees with master's tree:
master: bar_v3, foo/{file1, file2, file3},
You can see that merge_recursive_generic() would see branch_bfa as renaming
foo/ -> goo/, and master as just adding both foo/file1 and foo/file2. As
such, it ends up with goo/{file1, file2, file3}
The core problem is that am does not have access to the original trees; it
can only construct trees using the blobs involved in the patch. As such,
it is not safe to perform directory rename detection within am -3.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to commit 16346883ab ("t3401: add directory rename testcases for
rebase and am", 2018-06-27), add another testcase for directory rename
detection. This new testcase differs in that it showcases a situation
where no directory rename was performed, but which some backends
incorrectly detect.
As with the other testcase, run this in conjunction with each of the
types of rebases:
git-rebase--interactive
git-rebase--am
git-rebase--merge
and also use the same testcase for
git am --3way
Reported-by: Nikolay Kasyanov <corrmage@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A here-doc tag can be quoted ('EOF'/"EOF") or escaped (\EOF) to suppress
interpolation within the body. chainlint recognizes single-quoted and
escaped tags, but does not know about double-quoted tags. For
completeness, teach it to recognize double-quoted tags, as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The iconv that comes with a FreeBSD 11.2-RELEASE-p2 box I have access
to doesn't support the SHIFT-JIS encoding. Guard a test added in
e92d62253 ("convert: add round trip check based on
'core.checkRoundtripEncoding'", 2018-04-15) first released with Git
v2.18.0 with a prerequisite that checks for its availability.
The iconv command is in POSIX, and we have numerous tests
unconditionally relying on its ability to convert ASCII, UTF-8 and
UTF-16, but unconditionally relying on the presence of more obscure
encodings isn't portable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On both AIX 7200-00-01-1543 and FreeBSD 11.2-RELEASE-p2 the
"${var:-"str"}" syntax means something different than what it does
under the bash or dash shells.
Both will consider the start of the new unescaped quotes to be a new
argument to test_expect_success, resulting in the following error:
error: bug in the test script: 'git diff-tree initial # magic
is (not' does not look like a prereq
Fix this by removing the redundant quotes. There's no need for them,
and the resulting code works under all the aforementioned shells. This
fixes a regression in c2f1d3989 ("t4013: test new output from diff
--abbrev --raw", 2017-12-03) first released with Git v2.16.0.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Messages fix.
* ja/i18n-message-fixes:
i18n: fix mistakes in translated strings
|
|
Finishing touches to doc.
* ds/commit-graph-fsck:
config: fix commit-graph related config docs
|
|
Finishing touched to help string.
* js/range-diff:
range-diff: update stale summary of --no-dual-color
|
|
Test fix.
* sg/test-rebase-editor-fix:
t/lib-rebase.sh: support explicit 'pick' commands in 'fake_editor.sh'
|
|
Partially revert the support for multiple hash functions to regain
hash comparison performance; we'd think of a way to do this better
in the next cycle.
* jk/hashcmp-optim-for-2.19:
hashcmp: assert constant hash size
|
|
Test fixes.
* ab/test-must-be-empty-for-master:
t6018-rev-list-glob: fix 'empty stdin' test
|
|
Test fixes.
* sg/t3420-autostash-fix:
t3420-rebase-autostash: don't try to grep non-existing files
|
|
Test fixes.
* sg/t3903-missing-fix:
t3903-stash: don't try to grep non-existing file
|
|
Test fixes.
* sg/t7501-thinkofix:
t7501-commit: drop silly command substitution
|
|
Test fixes.
* sg/t0020-conversion-fix:
t0020-crlf: check the right file
|
|
Test fixes.
* sg/t4051-fix:
t4051-diff-function-context: read the right file
|
|
Portability fix.
* js/larger-timestamps:
commit: use timestamp_t for author_date_slab
|
|
Dev tool update.
* jk/use-compat-util-in-test-tool:
test-tool.h: include git-compat-util.h
|
|
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
|
|
"git cmd -h" updates.
* rs/opt-updates:
parseopt: group literal string alternatives in argument help
remote: improve argument help for add --mirror
checkout-index: improve argument help for --stage
|
|
"git help --config" (which is used in command line completion)
missed the configuration variables not described in the main
config.txt file but are described in another file that is included
by it, which has been corrected.
* nd/complete-config-vars:
generate-cmdlist.sh: collect config from all config.txt files
|
|
Code clean-up.
* ab/unconditional-free-and-null:
refactor various if (x) FREE_AND_NULL(x) to just FREE_AND_NULL(x)
|
|
"git worktree" command learned "--quiet" option to make it less
verbose.
* ep/worktree-quiet-option:
worktree: add --quiet option
|
|
"git branch --list" learned to take the default sort order from the
'branch.sort' configuration variable, just like "git tag --list"
pays attention to 'tag.sort'.
* sm/branch-sort-config:
branch: support configuring --sort via .gitconfig
|
|
The meaning of the possible values the "core.checkStat"
configuration variable can take were not adequately documented,
which has been fixed.
* nd/config-core-checkstat-doc:
config.txt: clarify core.checkStat
|
|
The --file option to grep isn't in POSIX[1], but -f is[1]. Let's check
for that in the future, and fix the portability regression in
f237c8b6fe ("commit-graph: implement git-commit-graph write",
2018-04-02) that broke e.g. AIX.
1. http://pubs.opengroup.org/onlinepubs/009695399/utilities/grep.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test guarded by PERLJSON added in 75459410ed ("json_writer: new
routines to create JSON data", 2018-07-13) assumed that a JSON boolean
value like "true" or "false" would be represented as "1" or "0" in
Perl.
This behavior can't be relied upon, e.g. with JSON.pm 2.50 and
JSON::PP. A JSON::PP::Boolean object will be represented as "true"
or "false". To work around this let's check if we have any refs left
after we check for hashes and arrays, assume those are JSON objects,
and coerce them to a known boolean value.
The behavior of this test still looks odd to me. Why implement our own
ad-hoc encoder just for some one-off test, as opposed to say Perl's
own Data::Dumper with Sortkeys et al? But with this change it works,
so let's leave it be.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the portability of chainlint by using shorter labels. On
AIX sed will complain about:
sed: 0602-417 The label :hereslurp is greater than eight
characters
This, in combination with the previous fix to this file makes
GIT_TEST_CHAIN_LINT=1 (which is the default) working again on AIX
without issues, and the "gmake check-chainlint" test also passes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
275267937b (range-diff: make dual-color the default mode, 2018-08-13)
replaced --dual-color with --no-dual-color but left the option's
summary untouched. Rewrite the summary to describe --no-dual-color
rather than dual-color.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change a comment in chainlint.sed to appease AIX sed, which would
previously print this error:
sed: # stash for later printing is not a recognized function
1. https://public-inbox.org/git/CAPig+cTTbU5HFMKgNyrxTp3+kcK46-Fn=4ZH6zDt1oQChAc3KA@mail.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The seq command is not in POSIX, and doesn't exist on
e.g. OpenBSD. We've had the test_seq wrapper since d17cf5f3a3 ("tests:
Introduce test_seq", 2012-08-04), but use of it keeps coming back,
e.g. in the recently added "fetch negotiator" tests being added here.
So let's also add a check to "make test-lint". The regex is aiming to
capture the likes of $(seq ..) and "seq" as a stand-alone command,
without capturing some existing cases where we e.g. have files called
"seq", as \bseq\b would do.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "head -c BYTES" option is non-portable (not in POSIX[1]). Change
such invocations to use the test_copy_bytes wrapper added in
48860819e8 ("t9300: factor out portable "head -c" replacement",
2016-06-30).
This fixes a test added in 9d2e330b17 ("ewah_read_mmap: bounds-check
mmap reads", 2018-06-14), which has been breaking
t5310-pack-bitmaps.sh on OpenBSD since 2.18.0. The OpenBSD ports
already have a similar workaround after their upgrade to 2.18.0[2].
I have not tested this on IRIX, but according to 4de0bbd898 ("t9300:
use perl "head -c" clone in place of "dd bs=1 count=16000" kluge",
2010-12-13) this invocation would have broken things there too.
Also, change a valgrind-specific codepath in test-lib.sh to use this
wrapper. Given where valgrind runs I don't think this would ever
become a portability issue in practice, but it's easier to just use
the wrapper than introduce some exception for the "make test-lint"
check being added here.
1. http://pubs.opengroup.org/onlinepubs/9699919799/utilities/head.html
2. https://github.com/openbsd/ports/commit/08d5d82eaefe5cf2f125ecc0c6a57df9cf91350c#diff-f7d3c4fabeed1691620d608f1534f5e5
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix typos and convert a question which does not expect to be replied
to a simple advice.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The core.commitGraph config setting was accidentally removed from
the config documentation. In that same patch, the config setting
that writes a commit-graph during garbage collection was incorrectly
written to the doc as "gc.commitGraph" instead of "gc.writeCommitGraph".
Reported-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jonathan Nieder
Max Kirillov
Eric Sunshine
Derrick Stolee
Elijah Newren
Ævar Arnfjörð Bjarmason
Kyle Meyer
Jean-Noël Avila