| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
HTTP servers return 400 if you send headers before the GET request.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to be able to ship protocol v2 with only supporting fetch, we
need clients to not issue a request to use protocol v2 when pushing
(since the client currently doesn't know how to push using protocol v2).
This allows a client to have protocol v2 configured in
`protocol.version` and take advantage of using v2 for fetch and falling
back to using v0 when pushing while v2 for push is being designed.
We could run into issues if we didn't fall back to protocol v2 when
pushing right now. This is because currently a server will ignore a request to
use v2 when contacting the 'receive-pack' endpoint and fall back to
using v0, but when push v2 is rolled out to servers, the 'receive-pack'
endpoint will start responding using v2. So we don't want to get into a
state where a client is requesting to push with v2 before they actually
know how to push using v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach remote-curl the 'stateless-connect' command which is used to
establish a stateless connection with servers which support protocol
version 2. This allows remote-curl to act as a proxy, allowing the git
client to communicate natively with a remote end, simply using
remote-curl as a pass through to convert requests to http.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an http info/refs request is made, requesting that protocol v2 be
used, don't send a "# service" line since this line is not part of the
v2 spec.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of always sending the Git-Protocol header with the configured
version with every http request, explicitly send it when discovering
refs and then only send it on subsequent http requests if the server
understood the version requested.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a way for callers to request that extra headers be included when
making http requests.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Store the protocol version the server responded with when performing
discovery. This will be used in a future patch to either change the
'Git-Protocol' header sent in subsequent requests or to determine if a
client needs to fallback to using a different protocol version.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make a copy of the service name being requested instead of relying on
the buffer pointed to by the passed in 'const char *' to remain
unchanged.
Currently, all service names are string constants, but a subsequent
patch will introduce service names from external sources.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the 'packet_buf_write_len()' function which allows for writing an
arbitrary length buffer into a 'struct strbuf' and formatting it in
packet-line format.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce the transport-helper capability 'stateless-connect'. This
capability indicates that the transport-helper can be requested to run
the 'stateless-connect' command which should attempt to make a
stateless connection with a remote end. Once established, the
connection can be used by the git client to communicate with
the remote end natively in a stateless-rpc manner as supported by
protocol v2. This means that the client must send everything the server
needs in a single request as the client must not assume any
state-storing on the part of the server or transport.
If a stateless connection cannot be established then the remote-helper
will respond in the same manner as the 'connect' command indicating that
the client should fallback to using the dumb remote-helper commands.
A future patch will implement the 'stateless-connect' capability in our
http remote-helper (remote-curl) so that protocol v2 can be used using
the http transport.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A future patch will need to take advantage of the logic which runs and
processes the response of the connect command on a remote helper so
factor out this logic from 'process_connect_service()' and place it into
a helper function 'run_connect()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 266f1fdfa (transport-helper: be quiet on read errors from
helpers, 2013-06-21) removed a call to 'die()' which printed the name of
the remote helper passed in to the 'recvline_fh()' function using the
'name' parameter. Once the call to 'die()' was removed the parameter
was no longer necessary but wasn't removed. Clean up 'recvline_fh()'
parameter list by removing the 'name' parameter.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to be able to ship protocol v2 with only supporting fetch, we
need clients to not issue a request to use protocol v2 when pushing
(since the client currently doesn't know how to push using protocol v2).
This allows a client to have protocol v2 configured in
`protocol.version` and take advantage of using v2 for fetch and falling
back to using v0 when pushing while v2 for push is being designed.
We could run into issues if we didn't fall back to protocol v2 when
pushing right now. This is because currently a server will ignore a request to
use v2 when contacting the 'receive-pack' endpoint and fall back to
using v0, but when push v2 is rolled out to servers, the 'receive-pack'
endpoint will start responding using v2. So we don't want to get into a
state where a client is requesting to push with v2 before they actually
know how to push using v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of having each builtin transport asking for which protocol
version the user has configured in 'protocol.version' by calling
`get_protocol_version_config()` multiple times, factor this logic out
so there is just a single call at the beginning of `git_connect()`.
This will be helpful in the next patch where we can have centralized
logic which determines if we need to request a different protocol
version than what the user has configured.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable shallow clones and deepen requests using protocol version 2 if
the server 'fetch' command supports the 'shallow' feature.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When communicating with a v2 server, perform a fetch by requesting the
'fetch' command.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce the 'fetch' server command.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Construct a list of ref prefixes to be passed to 'get_refs_list()' from
the refspec to be used during the push. This list of ref prefixes will
be used to allow the server to filter the ref advertisement when
communicating using protocol v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Construct a list of ref prefixes to be passed to
'transport_get_remote_refs()' from the refspec to be used during the
fetch. This list of ref prefixes will be used to allow the server to
filter the ref advertisement when communicating using protocol v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Construct an argv_array of ref prefixes based on the patterns supplied
via the command line and pass them to 'transport_get_remote_refs()' to
be used when communicating protocol v2 so that the server can limit the
ref advertisement based on those prefixes.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach transport_get_remote_refs() to accept a list of ref prefixes,
which will be sent to the server for use in filtering when using
protocol v2. (This list will be ignored when not using protocol v2.)
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the 'struct transport' virtual function 'get_refs_list()' to
optionally take an argv_array of ref prefixes. When communicating with
a server using protocol v2 these ref prefixes can be sent when
requesting a listing of their refs allowing the server to filter the
refs it sends based on the sent prefixes. This list will be ignored
when not using protocol v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach the client to be able to request a remote's refs using protocol
v2. This is done by having a client issue a 'ls-refs' request to a v2
server.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce the ls-refs server command. In protocol v2, the ls-refs
command is used to request the ref advertisement from the server. Since
it is a command which can be requested (as opposed to mandatory in v1),
a client can sent a number of parameters in its request to limit the ref
advertisement based on provided ref-prefixes.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce git-serve, the base server for protocol version 2.
Protocol version 2 is intended to be a replacement for Git's current
wire protocol. The intention is that it will be a simpler, less
wasteful protocol which can evolve over time.
Protocol version 2 improves upon version 1 by eliminating the initial
ref advertisement. In its place a server will export a list of
capabilities and commands which it supports in a capability
advertisement. A client can then request that a particular command be
executed by providing a number of capabilities and command specific
parameters. At the completion of a command, a client can request that
another command be executed or can terminate the connection by sending a
flush packet.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a packet-line test helper which can either pack or unpack an
input stream into packet-lines and writes out the result to stdout.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce protocol_v2, a new value for 'enum protocol_version'.
Subsequent patches will fill in the implementation of protocol_v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once protocol_v2 is introduced requesting a fetch or a push will need to
be handled differently depending on the protocol version. Store the
protocol version the server is speaking in 'struct git_transport_data'
and use it to determine what to do in the case of a fetch or a push.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to prepare for the addition of protocol_v2 push the protocol
version discovery outside of 'get_remote_heads()'. This will allow for
keeping the logic for processing the reference advertisement for
protocol_v1 and protocol_v0 separate from the logic for protocol_v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to allow for better control flow when protocol_v2 is introduced
convert 'get_remote_heads()' to use 'struct packet_reader' to read
packet lines. This enables a client to be able to peek the first line
of a server's response (without consuming it) in order to determine the
protocol version its speaking and then passing control to the
appropriate handler.
This is needed because the initial response from a server speaking
protocol_v0 includes the first ref, while subsequent protocol versions
respond with a version line. We want to be able to read this first line
without consuming the first ref sent in the protocol_v0 case so that the
protocol version the server is speaking can be determined outside of
'get_remote_heads()' in a future patch.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove code duplication and use the existing 'get_refs_via_connect()'
function to retrieve a remote's heads in 'fetch_refs_via_pack()' and
'git_transport_push()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Factor out the logic for processing shallow, deepen, deepen_since, and
deepen_not lines into their own functions to simplify the
'receive_needs()' function in addition to making it easier to reuse some
of this logic when implementing protocol_v2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to allow for code sharing with the server-side of fetch in
protocol-v2 convert upload-pack to be a builtin.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the design goals of protocol-v2 is to improve the semantics of
flush packets. Currently in protocol-v1, flush packets are used both to
indicate a break in a list of packet lines as well as an indication that
one side has finished speaking. This makes it particularly difficult
to implement proxies as a proxy would need to completely understand git
protocol instead of simply looking for a flush packet.
To do this, introduce the special deliminator packet '0001'. A delim
packet can then be used as a deliminator between lists of packet lines
while flush packets can be reserved to indicate the end of a response.
Documentation for how this packet will be used in protocol v2 will
included in a future patch.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes it is advantageous to be able to peek the next packet line
without consuming it (e.g. to be able to determine the protocol version
a server is speaking). In order to do that introduce 'struct
packet_reader' which is an abstraction around the normal packet reading
logic. This enables a caller to be able to peek a single line at a time
using 'packet_reader_peek()' and having a caller consume a line by
calling 'packet_reader_read()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current pkt-line API encodes the status of a pkt-line read in the
length of the read content. An error is indicated with '-1', a flush
with '0' (which can be confusing since a return value of '0' can also
indicate an empty pkt-line), and a positive integer for the length of
the read content otherwise. This doesn't leave much room for allowing
the addition of additional special packets in the future.
To solve this introduce 'packet_read_with_status()' which reads a packet
and returns the status of the read encoded as an 'enum packet_status'
type. This allows for easily identifying between special and normal
packets as well as errors. It also enables easily adding a new special
packet in the future.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git describe" was taught to dig trees deeper to find a
<commit-ish>:<path> that refers to a given blob object.
* sb/describe-blob:
builtin/describe.c: describe a blob
builtin/describe.c: factor out describe_commit
builtin/describe.c: print debug statements earlier
builtin/describe.c: rename `oid` to avoid variable shadowing
revision.h: introduce blob/tree walking in order of the commits
list-objects.c: factor out traverse_trees_and_blobs
t6120: fix typo in test name
|
|
"git merge" learned to pay attention to merge.verifySignatures
configuration variable and pretend as if '--verify-signatures'
option was given from the command line.
* hi/merge-verify-sig-config:
t5573, t7612: clean up after unexpected success of 'pull' and 'merge'
t: add tests for pull --verify-signatures
merge: add config option for verifySignatures
|
|
Git has been taught to support an https:// URL used for http.proxy
when using recent versions of libcurl.
* ws/curl-http-proxy-over-https:
http: support CURLPROXY_HTTPS
|
|
Doc update.
* ks/doc-previous-checkout:
Doc/check-ref-format: clarify information about @{-N} syntax
|
|
Error messages from "git rebase" have been somewhat cleaned up.
* ks/rebase-error-messages:
rebase: rebasing can also be done when HEAD is detached
rebase: distinguish user input by quoting it
rebase: consistently use branch_name variable
|
|
Docfix.
* sr/http-sslverify-config-doc:
config: document default value of http.sslVerify
|
|
"git imap-send" did not correctly quote the folder name when
making a request to the server, which has been corrected.
* nm/imap-send-quote-server-folder-name:
imap-send: URI encode server folder
|
|
Test fix.
* bp/fsmonitor:
p7519: improve check for prerequisite WATCHMAN
|
|
* jh/partial-clone-doc:
partial-clone: design doc
|
|
Code clean-up.
* jt/transport-hide-vtable:
transport: make transport vtable more private
clone, fetch: remove redundant transport check
|
|
"git version --build-options" learned to report the host CPU and
the exact commit object name the binary was built from.
* js/enhanced-version-info:
version --build-options: report commit, too, if possible
version --build-options: also report host CPU
|
|
* tz/lib-git-svn-svnserve-tests:
t/lib-git-svn.sh: improve svnserve tests with parallel make test
t/lib-git-svn: cleanup inconsistent tab/space usage
|
Brandon Williams
Josh Steadmon
Junio C Hamano