| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use multiple worker processes to distribute the queued entries and call
write_pc_item() in parallel for them. The items are distributed
uniformly in contiguous chunks. This minimizes the chances of two
workers writing to the same directory simultaneously, which could affect
performance due to lock contention in the kernel. Work stealing (or any
other format of re-distribution) is not implemented yet.
The protocol between the main process and the workers is quite simple.
They exchange binary messages packed in pkt-line format, and use
PKT-FLUSH to mark the end of input (from both sides). The main process
starts the communication by sending N pkt-lines, each corresponding to
an item that needs to be written. These packets contain all the
necessary information to load, smudge, and write the blob associated
with each item. Then it waits for the worker to send back N pkt-lines
containing the results for each item. The resulting packet must contain:
the identification number of the item that it refers to, the status of
the operation, and the lstat() data gathered after writing the file (iff
the operation was successful).
For now, checkout always uses a hardcoded value of 2 workers, only to
demonstrate that the parallel checkout framework correctly divides and
writes the queued entries. The next patch will add user configurations
and define a more reasonable default, based on tests with the said
settings.
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new interface allows us to enqueue some of the entries being
checked out to later uncompress them, apply in-process filters, and
write out the files in parallel. For now, the parallel checkout
machinery is enabled by default and there is no user configuration, but
run_parallel_checkout() just writes the queued entries in sequence
(without spawning additional workers). The next patch will actually
implement the parallelism and, later, we will make it configurable.
Note that, to avoid potential data races, not all entries are eligible
for parallel checkout. Also, paths that collide on disk (e.g.
case-sensitive paths in case-insensitive file systems), are detected by
the parallel checkout code and skipped, so that they can be safely
sequentially handled later. The collision detection works like the
following:
- If the collision was at basename (e.g. 'a/b' and 'a/B'), the framework
detects it by looking for EEXIST and EISDIR errors after an
open(O_CREAT | O_EXCL) failure.
- If the collision was at dirname (e.g. 'a/b' and 'A'), it is detected
at the has_dirs_only_path() check, which is done for the leading path
of each item in the parallel checkout queue.
Both verifications rely on the fact that, before enqueueing an entry for
parallel checkout, checkout_entry() makes sure that there is no file at
the entry's path and that its leading components are all real
directories. So, any later change in these conditions indicates that
there was a collision (either between two parallel-eligible entries or
between an eligible and an ineligible one).
After all parallel-eligible entries have been processed, the collided
(and thus, skipped) entries are sequentially fed to checkout_entry()
again. This is similar to the way the current code deals with
collisions, overwriting the previously checked out entries with the
subsequent ones. The only difference is that, since we no longer create
the files in the same order that they appear on index, we are not able
to determine which of the colliding entries will survive on disk (for
the classic code, it is always the last entry).
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fsck API clean-up.
* ab/fsck-api-cleanup:
fetch-pack: use new fsck API to printing dangling submodules
fetch-pack: use file-scope static struct for fsck_options
fetch-pack: don't needlessly copy fsck_options
fsck.c: move gitmodules_{found,done} into fsck_options
fsck.c: add an fsck_set_msg_type() API that takes enums
fsck.c: pass along the fsck_msg_id in the fsck_error callback
fsck.[ch]: move FOREACH_FSCK_MSG_ID & fsck_msg_id from *.c to *.h
fsck.c: give "FOREACH_MSG_ID" a more specific name
fsck.c: undefine temporary STR macro after use
fsck.c: call parse_msg_type() early in fsck_set_msg_type()
fsck.h: re-order and re-assign "enum fsck_msg_type"
fsck.h: move FSCK_{FATAL,INFO,ERROR,WARN,IGNORE} into an enum
fsck.c: refactor fsck_msg_type() to limit scope of "int msg_type"
fsck.c: rename remaining fsck_msg_id "id" to "msg_id"
fsck.c: remove (mostly) redundant append_msg_id() function
fsck.c: rename variables in fsck_set_msg_type() for less confusion
fsck.h: use "enum object_type" instead of "int"
fsck.h: use designed initializers for FSCK_OPTIONS_{DEFAULT,STRICT}
fsck.c: refactor and rename common config callback
|
|
A few option description strings started with capital letters,
which were corrected.
* cc/downcase-opt-help:
column, range-diff: downcase option description
|
|
SECURITY.md that is facing individual contributors and end users
has been introduced. Also a procedure to follow when preparing
embargoed releases has been spelled out.
* js/security-md:
Document how we do embargoed releases
SECURITY: describe how to report vulnerabilities
|
|
Optimize "rev-list --use-bitmap-index --objects" corner case that
uses negative tags as the stopping points.
* ps/pack-bitmap-optim:
pack-bitmap: avoid traversal of objects referenced by uninteresting tag
|
|
"git commit" learned "--trailer <key>[=<value>]" option; together
with the interpret-trailers command, this will make it easier to
support custom trailers.
* zh/commit-trailer:
commit: add --trailer option
|
|
CMake update for vsbuild.
* js/cmake-vsbuild:
cmake(install): include vcpkg dlls
cmake: add a preparatory work-around to accommodate `vcpkg`
cmake(install): fix double .exe suffixes
cmake: support SKIP_DASHED_BUILT_INS
|
|
The hashwrite() API uses a buffering mechanism to avoid calling
write(2) too frequently. This logic has been refactored to be
easier to understand.
* ds/clarify-hashwrite:
csum-file: make hashwrite() more readable
|
|
Plug or annotate remaining leaks that trigger while running the
very basic set of tests.
* ah/plugleaks:
transport: also free remote_refs in transport_disconnect()
parse-options: don't leak alias help messages
parse-options: convert bitfield values to use binary shift
init-db: silence template_dir leak when converting to absolute path
init: remove git_init_db_config() while fixing leaks
worktree: fix leak in dwim_branch()
clone: free or UNLEAK further pointers when finished
reset: free instead of leaking unneeded ref
symbolic-ref: don't leak shortened refname in check_symref()
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch -v<n>" learned to allow a reroll count that is
not an integer.
* zh/format-patch-fractional-reroll-count:
format-patch: allow a non-integral version numbers
|
|
A simple IPC interface gets introduced to build services like
fsmonitor on top.
* jh/simple-ipc:
t0052: add simple-ipc tests and t/helper/test-simple-ipc tool
simple-ipc: add Unix domain socket implementation
unix-stream-server: create unix domain socket under lock
unix-socket: disallow chdir() when creating unix domain sockets
unix-socket: add backlog size option to unix_stream_listen()
unix-socket: eliminate static unix_stream_socket() helper function
simple-ipc: add win32 implementation
simple-ipc: design documentation for new IPC mechanism
pkt-line: add options argument to read_packetized_to_strbuf()
pkt-line: add PACKET_READ_GENTLE_ON_READ_ERROR option
pkt-line: do not issue flush packets in write_packetized_*()
pkt-line: eliminate the need for static buffer in packet_write_gently()
|
|
Preparatory API changes for parallel checkout.
* mt/parallel-checkout-part-1:
entry: add checkout_entry_ca() taking preloaded conv_attrs
entry: move conv_attrs lookup up to checkout_entry()
entry: extract update_ce_after_write() from write_entry()
entry: make fstat_output() and read_blob_entry() public
entry: extract a header file for entry.c functions
convert: add classification for conv_attrs struct
convert: add get_stream_filter_ca() variant
convert: add [async_]convert_to_working_tree_ca() variants
convert: make convert_attrs() and convert structs public
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Explain pieces of the format-patch output upfront before the rest
of the documentation starts referring to them.
* jc/doc-format-patch-clarify:
format-patch: give an overview of what a "patch" message is
|
|
Testfix.
* ab/detox-gettext-tests:
mktag tests: fix broken "&&" chain
|
|
Comment update.
* hx/pack-objects-chunk-comment:
pack-objects: fix comment of reused_chunk.difference
|
|
"git send-email" learned to honor the core.hooksPath configuration.
* rf/send-email-hookspath:
git-send-email: Respect core.hooksPath setting
|
|
Remove the final hint that we used to have a scripted "git rebase".
* ab/remove-rebase-usebuiltin:
rebase: remove transitory rebase.useBuiltin setting & env
|
|
When accessing a server with a URL like https://user:pass@site/, we
did not to fall back to the basic authentication with the
credential material embedded in the URL after the "Negotiate"
authentication failed. Now we do.
* cs/http-use-basic-after-failed-negotiate:
remote-curl: fall back to basic auth if Negotiate fails
|
|
More test coverage over "diff --no-index".
* ab/diff-no-index-tests:
diff --no-index tests: test mode normalization
diff --no-index tests: add test for --exit-code
|
|
Code simplification by removing support for a caller that is long gone.
* ab/read-tree:
tree.h API: simplify read_tree_recursive() signature
tree.h API: expose read_tree_1() as read_tree_at()
archive: stop passing "stage" through read_tree_recursive()
ls-files: refactor away read_tree()
ls-files: don't needlessly pass around stage variable
tree.c API: move read_tree() into builtin/ls-files.c
ls-files tests: add meaningful --with-tree tests
show tests: add test for "git show <tree>"
|
|
Doc update.
* bs/asciidoctor-installation-hints:
INSTALL: note on using Asciidoctor to build doc
|
|
When "git checkout" removes a path that does not exist in the
commit it is checking out, it wasn't careful enough not to follow
symbolic links, which has been corrected.
* mt/checkout-remove-nofollow:
checkout: don't follow symlinks when removing entries
symlinks: update comment on threaded_check_leading_path()
|
|
It is customary not to begin the help text for each option given to
the parse-options API with a capital letter. Various (sub)commands'
option arrays don't follow the guideline provided by the parse_options
Documentation regarding the descriptions.
Downcase the first word of some option descriptions for "column"
and "range-diff".
Signed-off-by: Chinmoy Chakraborty <chinmoy12c@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our CMake configuration generates not only build definitions, but also
install definitions: After building Git using `msbuild git.sln`, the
built artifacts can be installed via `msbuild INSTALL.vcxproj`.
To specify _where_ the files should be installed, the
`-DCMAKE_INSTALL_PREFIX=<path>` option can be used when running CMake.
However, this process would really only install the files that were just
built. On Windows, we need more than that: We also need the `.dll` files
of the dependencies (such as libcurl). The `vcpkg` ecosystem, which we
use to obtain those dependencies, can be asked to install said `.dll`
files really easily, so let's do that.
This requires more than just the built `vcpkg` artifacts in the CI build
definition; We now clone the `vcpkg` repository so that the relevant
CMake scripts are available, in particular the ones related to defining
the toolchain.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are about to add support for installing the `.dll` files of Git's
dependencies (such as libcurl) in the CMake configuration. The `vcpkg`
ecosystem from which we get said dependencies makes that relatively
easy: simply turn on `X_VCPKG_APPLOCAL_DEPS_INSTALL`.
However, current `vcpkg` introduces a limitation if one does that:
While it is totally cool with CMake to specify multiple targets within
one invocation of `install(TARGETS ...) (at least according to
https://cmake.org/cmake/help/latest/command/install.html#command:install),
`vcpkg`'s parser insists on a single target per `install(TARGETS ...)`
invocation.
Well, that's easily accomplished: Let's feed the targets individually to
the `install(TARGETS ...)` function in a `foreach()` look.
This also has the advantage that we do not have to manually cull off the
two entries from the `${PROGRAMS_BUILT}` array before scheduling the
remainder to be installed into `libexec/git-core`. Instead, we iterate
through the array and decide for each entry where it wants to go.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the check added in 5476e1efde (fetch-pack: print and use
dangling .gitmodules, 2021-02-22) to make use of us now passing the
"msg_id" to the user defined "error_func". We can now compare against
the FSCK_MSG_GITMODULES_MISSING instead of parsing the generated
message.
Let's also replace register_found_gitmodules() with directly
manipulating the "gitmodules_found" member. A recent commit moved it
into "fsck_options" so we could do this here.
I'm sticking this callback in fsck.c. Perhaps in the future we'd like
to accumulate such callbacks into another file (maybe fsck-cb.c,
similar to parse-options-cb.c?), but while we've got just the one
let's just put it into fsck.c.
A better alternative in this case would be some library some more
obvious library shared by fetch-pack.c ad builtin/index-pack.c, but
there isn't such a thing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change code added in 5476e1efde (fetch-pack: print and use dangling
.gitmodules, 2021-02-22) so that we use a file-scoped "static struct
fsck_options" instead of defining one in the "fsck_gitmodules_oids()"
function.
We use this pattern in all of
builtin/{fsck,index-pack,mktag,unpack-objects}.c. It's odd to see
fetch-pack be the odd one out. One might think that we're using other
fsck_options structs in fetch-pack, or doing on fsck twice there, but
we're not.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the behavior of the .gitmodules validation added in
5476e1efde (fetch-pack: print and use dangling .gitmodules,
2021-02-22) so we're using one "fsck_options".
I found that code confusing to read. One might think that not setting
up the error_func earlier means that we're relying on the "error_func"
not being set in some code in between the two hunks being modified
here.
But we're not, all we're doing in the rest of "cmd_index_pack()" is
further setup by calling fsck_set_msg_types(), and assigning to
do_fsck_object.
So there was no reason in 5476e1efde to make a shallow copy of the
fsck_options struct before setting error_func. Let's just do this
setup at the top of the function, along with the "walk" assignment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the gitmodules_{found,done} static variables added in
159e7b080bf (fsck: detect gitmodules files, 2018-05-02) into the
fsck_options struct. It makes sense to keep all the context in the
same place.
This requires changing the recently added register_found_gitmodules()
function added in 5476e1efde (fetch-pack: print and use dangling
.gitmodules, 2021-02-22) to take fsck_options. That function will be
removed in a subsequent commit, but as it'll require the new
gitmodules_found attribute of "fsck_options" we need this intermediate
step first.
An earlier version of this patch removed the small amount of
duplication we now have between FSCK_OPTIONS_{DEFAULT,STRICT} with a
FSCK_OPTIONS_COMMON macro. I don't think such de-duplication is worth
it for this amount of copy/pasting.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change code I added in acf9de4c94e (mktag: use fsck instead of custom
verify_tag(), 2021-01-05) to make use of a new API function that takes
the fsck_msg_{id,type} types, instead of arbitrary strings that
we'll (hopefully) parse into those types.
At the time that the fsck_set_msg_type() API was introduced in
0282f4dced0 (fsck: offer a function to demote fsck errors to warnings,
2015-06-22) it was only intended to be used to parse user-supplied
data.
For things that are purely internal to the C code it makes sense to
have the compiler check these arguments, and to skip the sanity
checking of the data in fsck_set_msg_type() which is redundant to
checks we get from the compiler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the fsck_error callback to also pass along the
fsck_msg_id. Before this change the only way to get the message id was
to parse it back out of the "message".
Let's pass it down explicitly for the benefit of callers that might
want to use it, as discussed in [1].
Passing the msg_type is now redundant, as you can always get it back
from the msg_id, but I'm not changing that convention. It's really
common to need the msg_type, and the report() function itself (which
calls "fsck_error") needs to call fsck_msg_type() to discover
it. Let's not needlessly re-do that work in the user callback.
1. https://lore.kernel.org/git/87blcja2ha.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the FOREACH_FSCK_MSG_ID macro and the fsck_msg_id enum it helps
define from fsck.c to fsck.h. This is in preparation for having
non-static functions take the fsck_msg_id as an argument.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the FOREACH_MSG_ID macro to FOREACH_FSCK_MSG_ID in preparation
for moving it over to fsck.h. It's good convention to name macros
in *.h files in such a way as to clearly not clash with any other
names in other files.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In f417eed8cde (fsck: provide a function to parse fsck message IDs,
2015-06-22) the "STR" macro was introduced, but that short macro name
was not undefined after use as was done earlier in the same series for
the MSG_ID macro in c99ba492f1c (fsck: introduce identifiers for fsck
messages, 2015-06-22).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no reason to defer the calling of parse_msg_type() until after
we've checked if the "id < 0". This is not a hot codepath, and
parse_msg_type() itself may die on invalid input.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the values in the "enum fsck_msg_type" from being manually
assigned to using default C enum values.
This means we end up with a FSCK_IGNORE=0, which was previously
defined as "2".
I'm confident that nothing relies on these values, we always compare
them for equality. Let's not omit "0" so it won't be assumed that
we're using these as a boolean somewhere.
This also allows us to re-structure the fields to mark which are
"private" v.s. "public". See the preceding commit for a rationale for
not simply splitting these into two enums, namely that this is used
for both the private and public fsck API.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the FSCK_{FATAL,INFO,ERROR,WARN,IGNORE} defines into a new
fsck_msg_type enum.
These defines were originally introduced in:
- ba002f3b28a (builtin-fsck: move common object checking code to
fsck.c, 2008-02-25)
- f50c4407305 (fsck: disallow demoting grave fsck errors to warnings,
2015-06-22)
- efaba7cc77f (fsck: optionally ignore specific fsck issues
completely, 2015-06-22)
- f27d05b1704 (fsck: allow upgrading fsck warnings to errors,
2015-06-22)
The reason these were defined in two different places is because we
use FSCK_{IGNORE,INFO,FATAL} only in fsck.c, but FSCK_{ERROR,WARN} are
used by external callbacks.
Untangling that would take some more work, since we expose the new
"enum fsck_msg_type" to both. Similar to "enum object_type" it's not
worth structuring the API in such a way that only those who need
FSCK_{ERROR,WARN} pass around a different type.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor "if options->msg_type" and other code added in
0282f4dced0 (fsck: offer a function to demote fsck errors to warnings,
2015-06-22) to reduce the scope of the "int msg_type" variable.
This is in preparation for changing its type in a subsequent commit,
only using it in the "!options->msg_type" scope makes that change
This also brings the code in line with the fsck_set_msg_type()
function (also added in 0282f4dced0), which does a similar check for
"!options->msg_type". Another minor benefit is getting rid of the
style violation of not having braces for the body of the "if".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the remaining variables of type fsck_msg_id from "id" to
"msg_id". This change is relatively small, and is worth the churn for
a later change where we have different id's in the "report" function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the append_msg_id() function in favor of calling
prepare_msg_ids(). We already have code to compute the camel-cased
msg_id strings in msg_id_info, let's use it.
When the append_msg_id() function was added in 71ab8fa840f (fsck:
report the ID of the error/warning, 2015-06-22) the prepare_msg_ids()
function didn't exist. When prepare_msg_ids() was added in
a46baac61eb (fsck: factor out msg_id_info[] lazy initialization code,
2018-05-26) this code wasn't moved over to lazy initialization.
This changes the behavior of the code to initialize all the messages
instead of just camel-casing the one we need on the fly. Since the
common case is that we're printing just one message this is mostly
redundant work.
But that's OK in this case, reporting this fsck issue to the user
isn't performance-sensitive. If we were somehow doing so in a tight
loop (in a hopelessly broken repository?) this would help, since we'd
save ourselves from re-doing this work for identical messages, we
could just grab the prepared string from msg_id_info after the first
invocation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename variables in a function added in 0282f4dced0 (fsck: offer a
function to demote fsck errors to warnings, 2015-06-22).
It was needlessly confusing that it took a "msg_type" argument, but
then later declared another "msg_type" of a different type.
Let's rename that to "severity", and rename "id" to "msg_id" and
"msg_id" to "msg_id_str" etc. This will make a follow-up change
smaller.
While I'm at it properly indent the fsck_set_msg_type() argument list.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the fsck_walk_func to use an "enum object_type" instead of an
"int" type. The types are compatible, and ever since this was added in
355885d5315 (add generic, type aware object chain walker, 2008-02-25)
we've used entries from object_type (OBJ_BLOB etc.).
So this doesn't really change anything as far as the generated code is
concerned, it just gives the compiler more information and makes this
easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the definitions of FSCK_OPTIONS_{DEFAULT,STRICT} to use
designated initializers. This allows us to omit those fields that
are initialized to 0 or NULL.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By mistake, the `.exe` extension is appended _twice_ when installing the
dashed executables into `libexec/git-core/` on Windows (the extension is
already appended when adding items to the `git_links` list in the
`#Creating hardlinks` section).
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just like the Makefile-based build learned to skip hard-linking the
dashed built-ins in 179227d6e21 (Optionally skip linking/copying the
built-ins, 2020-09-21), this patch teaches the CMake-based build the
same trick.
Note: In contrast to the Makefile-based process, the built-ins would
only be linked during installation, not already when Git is built.
Therefore, the CMake-based build that we use in our CI builds _already_
does not link those built-ins (because the files are not installed
anywhere, they are used to run the test suite in-place).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Whenever we fix critical vulnerabilities, we follow some sort of
protocol (e.g. setting a coordinated release date, keeping the fix under
embargo until that time, coordinating with packagers and/or hosting
sites, etc).
Similar in spirit to `Documentation/howto/maintain-git.txt`, let's
formalize the details in a document.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Matheus Tavares
Junio C Hamano
Chinmoy Chakraborty
Dennis Ameling
Johannes Schindelin
Ævar Arnfjörð Bjarmason