| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* js/merge:
merge-recursive: add/add really is modify/modify with an empty base
Get rid of the dependency on RCS' merge program
merge-file: support -p and -q; fix compile warnings
Add builtin merge-file, a minimal replacement for RCS merge
xdl_merge(): fix and simplify conflict handling
xdl_merge(): fix thinko
xdl_merge(): fix an off-by-one bug
merge-recursive: use xdl_merge().
xmerge: make return value from xdl_merge() more usable.
xdiff: add xdl_merge()
|
|
"git push $URL HEAD~6" created a bogus ref HEAD~6 immediately
under $GIT_DIR of the remote repository. While we should keep
refspecs that have arbitrary extended SHA-1 expression on the
source side working (e.g. "HEAD~6:refs/tags/yesterday"), we
should not create bogus ref on the other end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The documentation talked about "git push $URL tag <tag>" as a short-hand
for refs/tags/<tag>:refs/tags/<tag> for a long time but that was never
the case (the short-hand was for "git fetch"). Instead of fixing the
documentation, just add a bit of code to match it since it is easy to do
and would make it more consistent.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is just a random hack to work around problems people seem
to be seeing in manpage backend of xmlto (it appears we are
getting ".sp" at the end of line without line break).
Could people test this out?
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
99.9999% of the time, the command is used with a single
strategy; after a merge failure, saying "No strategy handled the
merge" is technically correct, but there is no point stressing
we tried and failed all the possibilities the user has given.
Just say that it failed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Prior to 65ac6e9c3f47807cb603af07a6a9e1a43bc119ae we deleted a file
from the working directory during a merge if the file existed before
the merge started but was renamed by the branch being merged in.
This broke in 65ac6e as git-merge-recursive did not actually update
the working directory on an uncontested rename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
git-svn: correctly display fatal() error messages
git-svn: exit with status 1 for test failures
Conflicts:
git-svn.perl
nothing to commit
|
|
If I wanted to print $@, I'd pass $@ to fatal(). This looks like
a stupid typo on my part.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some versions of the SVN libraries cause die() to exit with 255,
and 40cf043389ef4cdf3e56e7c4268d6f302e387fa0 tightened up
test_expect_failure to reject return values >128.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
While adding colour to the branch command it was pointed out that a
config option like "branch.color" conflicts with the pre-existing
"branch.something" namespace used for specifying default merge urls and
branches. The suggested solution was to flip the order of the
components to "color.branch", which I did for colourising branch.
This patch does the same thing for
- git-log (color.diff)
- git-status (color.status)
- git-diff (color.diff)
- pager (color.pager)
I haven't removed the old config options; but they should probably be
deprecated and eventually removed to prevent future namespace
collisions. I've done this deprecation by changing the documentation
for the config file to match the new names; and adding the "color.XXX"
options to contrib/completion/git-completion.bash.
Unfortunately git-svn reads "diff.color" and "pager.color"; which I
don't like to change unilaterally.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Unify the handling for cases C (add/add) and D (modify/modify).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* master: (42 commits)
git-svn: correctly handle packed-refs in refs/remotes/
add test case for recursive merge
git-svn: correctly display fatal() error messages
git-svn: allow dcommit to take an alternate head
git-svn: enable logging of information not supported by git
Clarify fetch error for missing objects.
Move Fink and Ports check to after config file
shortlog: fix segfault on empty authorname
shortlog: remove "[PATCH]" prefix from shortlog output
Make sure the empty tree exists when needed in merge-recursive.
Don't use memcpy when source and dest. buffers may overlap
no need to install manpages as executable
Documentation: simpler shared repository creation
shortlog: fix segfault on empty authorname
Add branch.*.merge warning and documentation update
Fix perl/ build.
git-svn: use do_switch for --follow-parent if the SVN library supports it
Fix documentation copy&paste typo
git-svn: extra error check to ensure we open a file correctly
Documentation: update git-clone man page with new behavior
...
|
|
Now that we have git-merge-file, an RCS merge lookalike, we no longer
need it. So long, merge, and thanks for all the fish!
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We now use git-rev-parse universally to read refs, instead
of our own file_to_s function (which I plan on removing).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
Clarify fetch error for missing objects.
Move Fink and Ports check to after config file
Conflicts:
Makefile
|
|
This test case is based on the bug report by Shawn Pearce.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If I wanted to print $@, I'd pass $@ to fatal(). This looks like
a stupid typo on my part.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Previously dcommit would unconditionally commit all patches
up-to and including the current HEAD. Now if an optional
command-line argument is specified, it will only commit
up to the specified revision.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The changes are now tracked in
$GIT_DIR/svn/$GIT_SVN_ID/untracked.log
Information in the untracked.log include:
* the addition and removal of empty directories
(changes of these will also warn the user)
* file and directory property changes, including (but not
limited to) svk:merge and svn:externals
* revision properties (revprops) are also tracked
* users will be warned of 'absent' file and directories
(if users are forbidden access)
Fields in entries are separated by spaces; "unsafe" characters
are URI-encoded so that each entry takes exactly one line.
There is currently no automated parser for dealing with the data
in untracked.log, but it should be possible to write one to
create empty directories on checkout and manage
externals/subprojects.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Otherwise there're such things like:
Cannot obtain needed none 9a6e87b60dbd2305c95cecce7d9d60f849a0658d
while processing commit 0000000000000000000000000000000000000000.
which while looks weird. What is the none needed for?
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Putting NO_FINK or NO_DARWIN_PORTS in config.mak is ignored because the
checks are done before the config is included.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The old code looked backwards from the email address to parse
the name, allowing an arbitrary number of spaces between the
two. However, in the case of no name, we looked back too far to
the 'author' (or 'Author:') header.
The bug was triggered by commit febf7ea4bed from linux-2.6.
Jeff King originally fixed it by looking back only one
character; Johannes Schindelin pointed out that we could try
harder while at it to cope with commits with broken headers.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Originally noticed by Nicolas Pitre; the real cause was the code
was prepared to deal with [PATCH] (and [PATCH n/m whatever])
prefixes but forgot that the string can be indented while acting
as a filter.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
Make sure the empty tree exists when needed in merge-recursive.
Don't use memcpy when source and dest. buffers may overlap
no need to install manpages as executable
|
|
There are some baseless merge cases where git-merge-recursive will
try to compare one of the branches against the empty tree. However
most projects won't have the empty tree object in their object database
as Git does not normally create empty tree objects. If the empty tree
object is missing then the merge process will die, as it cannot load the
object from the database. The error message may make the user think that
their database is corrupt when its actually not.
So instead we should just create the empty tree object whenever it is
needed. If the object already exists as a loose object then no harm
done. Otherwise that loose object will be pruned away later by either
git-prune or git-prune-packed.
Thanks goes to Junio for suggesting this fix.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-index-pack can call memcpy with overlapping source and destination
buffers. The patch below makes it use memmove instead.
If you want to demonstrate a failure, add the following two lines
+ if (input_offset < input_len)
+ abort ();
before the existing memcpy call (shown in the patch below),
and then run this:
(cd t; sh ./t5500-fetch-pack.sh)
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
No need to install manpages as executable. Noticed by Ville Skytt,Ad(B.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Take Johannes Schindelin's suggestions for a further simplification of
the shared repository creation using git --bare init-db --shared, and
for a simplified cvsimport using an existing CVS working directory.
Also insert more man page references.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
cvs-migration.txt | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The old code looked backwards from the email address to parse the name,
allowing an arbitrary number of spaces between the two. However, in the case
of no name, we looked back too far to the 'author' (or 'Author:') header.
Instead, remove at most one space between name and address.
The bug was triggered by commit febf7ea4bed from linux-2.6.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch clarifies the meaning of the branch.*.merge option.
Previously, if branch.*.merge was specified but did not match any
ref, the message "No changes." was not really helpful regarding
the misconfiguration. This patch adds a warning for this.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
An earlier commit f848718a broke the build in perl/ directory by
allowing the Makefile.PL to overwrite the now-tracked Makefile.
Fix this by forcing Makefile.PL to produce its output in
perl.mak as the broken commit originally intended.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
do_switch works with the SVN Perl bindings after r22312 in the
Subversion trunk. Since no released version of SVN currently
supports it; we'll just autodetect it and enable its usage
when a user has a recent-enough version of SVN.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This was introduced in 45a3b12cfd3eaa05bbb0954790d5be5b8240a7b5
Signed-off-by: Uwe Kleine-K,AC6(Bnig <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This may be an issue with repositories imported with commit
27a1a8014b842c0d70fdc91c68dd361ca2dfb34c or later, but before
commit dad73c0bb9f33323ec1aacf560a6263f1d85f81a.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Update git-clone man page to reflect recent changes
(--use-separate-remote default and use of .git/config instead of
remotes files), and rewrite introduction.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
cvsserver: Avoid miscounting bytes in Perl v5.8.x
|
|
At some point between v5.6 and 5.8 Perl started to assume its input,
output and filehandles are UTF-8. This breaks the counting of bytes
for the CVS protocol, resulting in the client expecting less data
than we actually send, and storing truncated files.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Currently the treshold is 5000. The likelihood of this value to ever be
crossed for a single push is really small making it not really useful.
The optimal treshold for a pure space saving on a filesystem with 4kb
blocks is 3. However this is likely to create many small packs
concentrating a large number of files in a single directory compared to
the same objects which are spread over 256 directories when loose. This
means we would need 512 objects per pack on average to approximagte the
same directory cost (a pack has 2 files because of the index).
But 512 is a really high value just like 5000 since most pushes are
unlikely to have that many objects. So let's try with a value of 100
which should have a good balance between small pushes going to be
exploded into loose objects and large pushes kept as whole packs.
This is not a replacement for periodic repacks of course.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Modify cvs-migration.txt so it explains first how to develop against a
shared repository, then how to set up a shared repository, then how to
import a repository from cvs. Though this seems chronologically
backwards, it's still readable in this order, and it puts the more
commonly needed material closer to the front.
Remove the annotate/pickaxe section; perhaps it can find a place elsewhere
in the future. Remove most of the "why git is better than cvs" stuff from
the introduction.
Add some minor clarifications, including two that have come up several
times on the mailing list:
1. Recommend committing any changes before running pull.
2. Note that changes must be commited before they can be pushed.
Update the clone discussion to reflect the new --use-separate-remotes
default, and add a brief mention of git-cvsserver.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
An earlier commit 3683dc5a broke the merge message generation with
a careless use of && where it was not needed, breaking the merge
message for cases where non branches are given.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Long-running fetches run inside children to avoid memory leaks.
When we refork, the connection in the parent can be idle for a
long time; attempting to reuse it in the next child can result
in timeouts.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Allow images in one of web formats (PNG, GIF, JPEG) - actually files
with mimetype of image/png, image/git, image/jpeg - to be displayed in
"blob" view using <img /> element, instead of using "blob_plain" view
for them, like for all other files except also text/* mimetype files.
This makes possible to easily go to file history, to HEAD version of
the file, to appropriate commit etc; all of those are not available
in "blob_plain" (raw) view.
Only text files can have "blame" view link in the formats part of
navbar.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
While deciding if the new style command line argument is a tag
or a branch, we checked it with "git show-ref -s --verify" to
see if results in an error, but when it is not a branch, the
check leaked the error message out, which was not needed to be
shown to the end user.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
* maint:
git-reset to remove "$GIT_DIR/MERGE_MSG"
unpack-trees: make sure "df_conflict_entry.name" is NUL terminated.
|
|
An earlier commit a9cb3c6e changed git-commit to use the
contents of MERGE_MSG even when we do not have MERGE_HEAD (the
rationale is in its log message).
However, the change tricks the following sequence to include a
merge message in a completely unrelated commit:
$ git pull somewhere
: oops, the conflicts are too much. forget it.
$ git reset --hard
: work work work
$ git commit
To fix this confusion, this patch makes "git reset" to remove
the leftover MERGE_MSG that was prepared when the user abandoned
the merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Luben Tuikov <ltuikov@yahoo.com
|
|
Now merge-file also understands --stdout and --quiet options. While
at it, two compile warnings were fixed.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
merge-file has the same syntax as RCS merge, but supports only the
"-L" option.
For good measure, a test is added, which is quite minimal, though.
[jc: further fix for compliation errors included.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Rename the section titles to make the "how-to" content of the section
obvious. Also clarify that changes have to be commited before they can
be pushed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Shawn Pearce
Eric Wong
Andy Parkins
Johannes Schindelin
Alex Riesen
Brian Gernhardt
Jim Meyering
Chris Wright
J. Bruce Fields
Jeff King
Josef Weidendorfer
Uwe Zeisberger
Martin Langhoff
Nicolas Pitre
Jakub Narebski