| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Check whether the new remote.${remotename}.pushurl setting is obeyed
and whether it overrides remote.${remotename}.url.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This introduces a config setting remote.$remotename.pushurl which is
used for pushes only. If absent remote.$remotename.url is used for
pushes and fetches as before.
This is useful, for example, in order to do passwordless fetches
(remote update) over the git transport but pushes over ssh.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
diff.c: plug a memory leak in an error path
fetch-pack: close output channel after sideband demultiplexer terminates
builtin-remote: Make "remote show" display all urls
|
|
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git stash pop' supports the '--index' option since its initial
implementation (bd56ff54, git-stash: add new 'pop' subcommand,
2008-02-22), but its documentation does not mention it explicitly.
Moreover, both the usage shown by 'git stash -h' and the synopsis
section in the man page imply that 'git stash pop' does not have an
'--index' option.
First, this patch corrects the usage and the synopsis section.
Second, the patch moves the description of the '--index' option to the
'git stash pop' section in the documentation, and refers to it from
the 'git stash apply' section. This way it follows the intentions of
commit d1836637 (Documentation: teach stash/pop workflow instead of
stash/apply, 2009-05-28), as all 'git stash pop'-related documentation
will be in one place without references to 'git stash apply'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
5734365 (show-branch: migrate to parse-options API 2009-05-21)
incorrectly set the --more option's flags to be
PARSE_OPT_LASTARG_DEFAULT and PARSE_OPT_OPTARG. These two flags
shouldn't be used together. An option taking a default should just set
the default value desired and parse options will take care of the rest.
Update the header comment to better convey this information.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rest of the git source has been converted to use upper-case character
encoding names to assist older platforms. The charset attribute of MIME
is defined to be case-insensitive, but older platforms may still have an
easier time dealing with upper-case rather than lower-case. So do so for
send-email too.
Update t9001 to handle the changes.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to rfc2047, an encoded word has the following form:
encoded-word = "=?" charset "?" encoding "?" encoded-text "?="
charset = token
encoding = token
token = <Any CHAR except SPACE, CTLs, and especials>
especials = "(" / ")" / "<" / ">" / "@" / "," / ";" / ":" / "
<"> / "/" / "[" / "]" / "?" / "." / "="
encoded-text = <Any printable ASCII character other than "?"
or SPACE>
And rfc822 defines CHARs and CTLs as:
CHAR = <any ASCII character> ; ( 0-177, 0.-127.)
CTL = <any ASCII control ; ( 0- 37, 0.- 31.)
character and DEL> ; ( 177, 127.)
The original code only detected rfc2047 encoded strings when the charset
was UTF-8. This patch generalizes the matching expression and breaks the
check for an rfc2047 encoded string into its own function. There's no real
functional change, since any properly rfc2047 encoded string would have
fallen through the remaining 'if' statements and been returned unchanged.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fetch-pack runs the sideband demultiplexer using start_async(). This
facility requires that the asynchronously executed function closes the
output file descriptor (see Documentation/technical/api-run-command.txt).
But the sideband demultiplexer did not do that. This fixes it.
In certain error situations this could lock up a fetch operation on
Windows because the asynchronous function is run in a thread; by not
closing the output fd the reading end never got EOF and waited for more
data indefinitely. On Unix this is not a problem because the asynchronous
function is run in a separate process, which exits after the function ends
and so implicitly closes the output.
Since the pack that is sent over the wire encodes the number of objects in
the stream, during normal operation the reading end knows when the stream
ends and terminates by itself, and does not lock up.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, "git remote -v" lists all urls whereas "git remote show
$remote" shows only the first. Make it so that both show all.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add {}-braces around an else-part, where the if-part already has
{}-braces.
And, also remove some unnecessary "return;"-statements at the end of
"void foo()"-functions.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: refer to gitworkflows(7) from tutorial and git(1)
daemon: Strictly parse the "extra arg" part of the command
|
|
Add references to the gitworkflows(7) manpage added in f948dd8
(Documentation: add manpage about workflows, 2008-10-19) to both
gittutorial(1) and git(1), so that new users might actually discover
and read it.
Noticed by Randal L. Schwartz.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 1.4.4.5 (49ba83fb67 "Add virtualization support to git-daemon")
git daemon enters an infinite loop and never terminates if a client
hides any extra arguments in the initial request line which is not
exactly "\0host=blah\0".
Since that change, a client must never insert additional extra
arguments, or attempt to use any argument other than "host=", as
any daemon will get stuck parsing the request line and will never
complete the request.
Since the client can't tell if the daemon is patched or not, it
is not possible to know if additional extra args might actually be
able to be safely requested.
If we ever need to extend the git daemon protocol to support a new
feature, we may have to do something like this to the exchange:
# If both support git:// v2
#
C: 000cgit://v2
S: 0010ok host user
C: 0018host git.kernel.org
C: 0027git-upload-pack /pub/linux-2.6.git
S: ...git-upload-pack header...
# If client supports git:// v2, server does not:
#
C: 000cgit://v2
S: <EOF>
C: 003bgit-upload-pack /pub/linux-2.6.git\0host=git.kernel.org\0
S: ...git-upload-pack header...
This requires the client to create two TCP connections to talk to
an older git daemon, however all daemons since the introduction of
daemon.c will safely reject the unknown "git://v2" command request,
so the client can quite easily determine the server supports an
older protocol.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a '$' in the __git_ps1 output to show stashed changes are present,
when GIT_PS1_SHOWSTASHSTATE is set to a nonempty value.
The code for checking if the stash has entries is taken from
'git-stash.sh'.
Signed-off-by: Daniel Trstenjak <daniel.trstenjak@online.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command "git grep -w ''" dies as soon as it encounters an empty line,
reporting (wrongly) that "regexp returned nonsense". The first hunk of
this patch relaxes the sanity check that is responsible for that,
allowing matches to start at the end.
The second hunk complements it by making sure that empty matches are
rejected if -w was specified, as they are not really words.
GNU grep does the same:
$ echo foo | grep -c ''
1
$ echo foo | grep -c -w ''
0
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* da/pretty-tempname:
diff: generate pretty filenames in prep_temp_blob()
compat: add a basename() compatibility function
compat: add a mkstemps() compatibility function
Conflicts:
Makefile
|
|
This simplifies the logic of rev_compare_tree() by removing a special
case.
It does so by turning the special case of finding a diff to be "all new
files" into a more generic case of "all new" vs "all removed" vs "mixed
changes", so now the code is actually more powerful and more generic, and
the added symmetry actually makes it simpler too.
This makes no changes to any existing behavior, but apart from the
simplification it does make it possible to some day care about whether all
changes were just deletions if we want to. Which we may well want to for
merge handling.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
blame: correctly handle a path that used to be a directory
add -i: do not dump patch during application
Update draft release notes for 1.6.3.2
grep: fix colouring of matches with zero length
Documentation: teach stash/pop workflow instead of stash/apply
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
|
|
When trying to see if the same path exists in the parent, we ran
"diff-tree" with pathspec set to the path we are interested in with the
parent, and expect either to have exactly one resulting filepair (either
"changed from the parent", "created when there was none") or nothing (when
there is no change from the parent).
If the path used to be a directory, however, we will also see unbounded
number of entries that talk about the files that used to exist underneath
the directory in question. Correctly pick only the entry that describes
the path we are interested in in such a case (namely, the creation of the
path as a regular file).
Noticed by Ben Willard.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove a debugging print that snuck in at 7a26e65 (Revert
"git-add--interactive: remove hunk coalescing", 2009-05-16).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/maint-1.6.0-xdl-merge-fix:
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
Conflicts:
xdiff/xmerge.c
|
|
* rs/maint-grep-word-regexp-fix:
grep: fix colouring of matches with zero length
grep: fix word-regexp at the beginning of lines
|
|
* sb/maint-1.6.2-opt-filename-fix:
apply, fmt-merge-msg: use relative filenames
commit: -F overrides -t
|
|
* jc/maint-add-p-coalesce-fix:
t3701: ensure correctly set up repository after skipped tests
Revert "git-add--interactive: remove hunk coalescing"
Splitting a hunk that adds a line at the top fails in "add -p"
|
|
* tr/maint-doc-stash-pop:
Documentation: teach stash/pop workflow instead of stash/apply
|
|
Previously, die() would report the exit code of stop_httpd. Instead,
save and reset the exit code before dying.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Exit trap should not be removed in case tests require cleanup code. This
is especially important if tests are executed with the --immediate option.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, unknown options would be ignored, including any subsequent
valid options.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a zero-length match is encountered, break out of loop and show the rest
of the line uncoloured. Otherwise we'd be looping forever, trying to make
progress by advancing the pointer by zero characters.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Copy the description of date-order from rev-list-options.txt, and then
reword it to be commit specific. While we're at it, put <rev> <glob>...
on a new line to not exceed 80 characters.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Naturally, prep_temp_blob() did not care about filenames.
As a result, GIT_EXTERNAL_DIFF and textconv generated
filenames such as ".diff_XXXXXX".
This modifies prep_temp_blob() to generate user-friendly
filenames when creating temporary files.
Diffing "name.ext" now generates "XXXXXX_name.ext".
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some systems such as Windows lack libgen.h so provide a
basename() implementation for cross-platform use.
This introduces the NO_LIBGEN_H construct to the Makefile
and autoconf scripts.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
mkstemps() is a BSD extension so provide an implementation
for cross-platform use.
Signed-off-by: David Aguilar <davvid@gmail.com>
Tested-by: Johannes Sixt <j6t@kdbg.org> (Windows)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/opt-filename:
parse-opts: add OPT_FILENAME and transition builtins
parse-opts: prepare for OPT_FILENAME
Conflicts:
builtin-log.c
|
|
* jc/solaris-0811:
OpenSolaris 200811 (SunOS 5.11) does not want OLD_ICONV
Teach Solaris that _XOPEN_SOURCE=600 really menas XPG6
|
|
* sb/show-branch-parse-options:
show-branch: migrate to parse-options API
parse-options: add PARSE_OPT_LITERAL_ARGHELP for complicated argh's
Conflicts:
parse-options.h
|
|
* mm/apply-double-slash:
apply: handle filenames with double slashes better
|
|
* sb/format-patch-parseopt:
format-patch: migrate to parse-options API
Conflicts:
builtin-log.c
|
|
* jc/mktree:
mktree: validate entry type in input
mktree --batch: build more than one tree object
mktree --missing: updated usage message and man page
mktree --missing: allow missing objects
t1010: add mktree test
mktree: do not barf on a submodule commit
builtin-mktree.c: use a helper function to handle one line of input
mktree: use parse-options
build-in git-mktree
|
|
* ew/svn-test-and-old-i18n:
t8005: fix typo, it's ISO-8859-5, not KOI8-R
t8005: convert CP1251 character set to ISO8859-5
t8005: use more portable character encoding names
t5100: use ancient encoding syntax for backwards compatibility
t9301: use ISO8859-1 rather than ISO-8859-1
t3901: Use ISO8859-1 instead of ISO-8859-1 for backward compatibility
t3901: avoid negation on right hand side of '|'
builtin-mailinfo.c: use "ISO8859-1" instead of "latin1" as fallback encoding
builtin-mailinfo.c: compare character encodings case insensitively
Use 'UTF-8' rather than 'utf-8' everywhere for backward compatibility
t3900: use ancient iconv names for backward compatibility
|
|
* mw/send-email:
send-email: Remove superfluous `my $editor = ...'
send-email: 'References:' should only reference what is sent
send-email: Handle "GIT:" rather than "GIT: " during --compose
Docs: send-email: --smtp-server-port can take symbolic ports
Docs: send-email: Refer to CONFIGURATION section for sendemail.multiedit
Docs: send-email: Put options back into alphabetical order
|
Michael J Gruber
Junio C Hamano
SZEDER Gábor
Johannes Sixt
Stephen Boyd
Brandon Casey
Kjetil Barvik
Thomas Rast
Shawn O. Pearce
Daniel Trstenjak
René Scharfe
Linus Torvalds
Clemens Buchacher
David Aguilar