summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-07-22Documentation: minor grammatical fix in rev-list-options.txtLibravatar Jack Nagel1-1/+1
Signed-off-by: Jack Nagel <jacknagel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-21Documentation: git-filter-branch honors replacement refsLibravatar Peter Collingbourne1-2/+3
Make it clear that git-filter-branch will honor and make permanent replacement refs as well as grafts. Signed-off-by: Peter Collingbourne <peter@pcc.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-20remote-curl: Add a format check to parsing of info/refsLibravatar Julian Phillips1-0/+2
When parsing info/refs, no checks were applied that the file was in the requried format. Since the file is read from a remote webserver, this isn't guarenteed to be true. Add a check that the file at least only contains lines that consist of 40 characters followed by a tab and then the ref name. Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-19git-config: Remove extra whitespacesLibravatar Pavan Kumar Sunkara1-2/+2
Remove extra whitespaces introduced by commits 01ebb9dc and fc1905bb Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-06docs: document --textconv diff optionLibravatar Jeff King1-0/+11
This has been there since textconv existed, but was never documented. There is some overlap with what's in gitattributes(5), but it's important to warn in both places that textconv diffs probably can't be applied. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-29Merge git://bogomips.org/git-svn into maintLibravatar Junio C Hamano2-4/+41
* git://bogomips.org/git-svn: git-svn: Correctly handle root commits in mergeinfo ranges git-svn: Disambiguate rev-list arguments to improve error message git-svn: Demonstrate a bug with root commits in mergeinfo ranges
2011-06-29Merge branch 'maint-1.7.5' into maintLibravatar Junio C Hamano2-3/+11
* maint-1.7.5: test: skip clean-up when running under --immediate mode "branch -d" can remove more than one branches
2011-06-29test: skip clean-up when running under --immediate modeLibravatar Junio C Hamano1-2/+10
Some tests try to be too careful about cleaning themselves up and do test_expect_success description ' set-up some test refs and/or configuration && test_when_finished "revert the above changes" && the real test ' Which is nice to make sure that a potential failure would not have unexpected interaction with the next test. This however interferes when "the real test" fails and we want to see what is going on, by running the test with --immediate mode and descending into its trash directory after the test stops. The precondition to run the real test and cause it to fail is all gone after the clean-up procedure defined by test_when_finished is done. Update test_run_ which is the workhorse of running a test script called from test_expect_success and test_expect_failure, so that we do not run clean-up script defined with test_when_finished when a test that is expected to succeed fails under the --immediate mode. Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Jeff King <peff@peff.net>
2011-06-29"branch -d" can remove more than one branchesLibravatar Junio C Hamano1-1/+1
Since 03feddd (git-check-ref-format: reject funny ref names, 2005-10-13), "git branch -d" can take more than one branch names to remove. The documentation was correct, but the usage string was not. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-28git-svn: Correctly handle root commits in mergeinfo rangesLibravatar Michael Haggerty2-3/+7
If the bottom of a mergeinfo range is a commit that maps to a git root commit, then it doesn't have a parent. In such a case, use git commit range "$top_commit" rather than "$bottom_commit^..$top_commit". [ew: line-wrap at 80 columns] Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Acked-by: Eric Wong <normalperson@yhbt.net>
2011-06-28git-svn: Disambiguate rev-list arguments to improve error messageLibravatar Michael Haggerty1-2/+2
Add "--" in the "git rev-list" command line so that if there is a bug and the revisions cannot be found, the error message is a bit less cryptic. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Acked-by: Eric Wong <normalperson@yhbt.net>
2011-06-28git-svn: Demonstrate a bug with root commits in mergeinfo rangesLibravatar Michael Haggerty1-0/+33
If a svn:mergeinfo range starts at a commit that was converted as a git root commit (e.g., r1 or a branch that was created out of thin air), then there is an error when git-svn tries to run git rev-list "$bottom_commit^..$top_commit" because $bottom_commit (the git commit corresponding to r1) has no parent. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Acked-by: Eric Wong <normalperson@yhbt.net>
2011-06-26Git 1.7.6Libravatar Junio C Hamano3-8/+7
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-26Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: completion: replace core.abbrevguard to core.abbrev
2011-06-24Merge branch 'maint-1.7.4' into maintLibravatar Junio C Hamano1-1/+1
* maint-1.7.4: completion: replace core.abbrevguard to core.abbrev
2011-06-24completion: replace core.abbrevguard to core.abbrevLibravatar Namhyung Kim1-1/+1
The core.abbrevguard config variable had removed and now core.abbrev has been used instead. Teach it. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-22Git 1.7.6-rc3Libravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-22Merge branch 'maint'Libravatar Junio C Hamano1-4/+8
* maint: Documentation: git diff --check respects core.whitespace
2011-06-22Documentation: git diff --check respects core.whitespaceLibravatar Christof Krüger1-4/+8
Fix documentation on "git diff --check" by adopting the description from "git apply --whitespace". Signed-off-by: Christof Krüger <git@christof-krueger.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-21Merge branch 'maint'Libravatar Junio C Hamano1-0/+2
* maint: gitweb: 'pickaxe' and 'grep' features requires 'search' to be enabled
2011-06-21gitweb: 'pickaxe' and 'grep' features requires 'search' to be enabledLibravatar Jakub Narebski1-0/+2
Both 'pickaxe' (searching changes) and 'grep' (searching files) require basic 'search' feature to be enabled to work. Enabling e.g. only 'pickaxe' won't work. Add a comment about this. Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-20Merge branch 'mk/grep-pcre'Libravatar Junio C Hamano1-3/+3
* mk/grep-pcre: t7810: avoid unportable use of "echo"
2011-06-20t7810: avoid unportable use of "echo"Libravatar Junio C Hamano1-3/+3
Michael J Gruber noticed that under /bin/dash this test failed (as is expected -- \n in the string can be interpreted by the command), while it passed with bash. We probably could work it around by using backquote in front of it, but it is safer and more readable to avoid "echo" altogether in a case like this. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-20plug a few coverity-spotted leaksLibravatar Jim Meyering4-5/+12
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-19Merge branch 'di/no-no-existant'Libravatar Junio C Hamano7-14/+14
* di/no-no-existant: Fix typo: existant->existent
2011-06-19Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: builtin/gc.c: add missing newline in message
2011-06-19builtin/gc.c: add missing newline in messageLibravatar Andreas Schwab1-1/+1
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-17tests: link shell libraries into valgrind directoryLibravatar Jeff King1-2/+7
When we run tests under valgrind, we symlink anything executable that starts with git-* or test-* into a special valgrind bin directory, and then make that our GIT_EXEC_PATH. However, shell libraries like git-sh-setup do not have the executable bit marked, and did not get symlinked. This means that any test looking for shell libraries in our exec-path would fail to find them, even though that is a fine thing to do when testing against a regular git build (or in a git install, for that matter). t2300 demonstrated this problem. The fix is to symlink these shell libraries directly into the valgrind directory. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-17t/Makefile: pass test opts to valgrind target properlyLibravatar Jeff King1-1/+1
The valgrind target just reinvokes make with GIT_TEST_OPTS set to "--valgrind". However, it does this using an environment variable, which means GIT_TEST_OPTS in your config.mak would override it, and "make valgrind" would simply run the test suite without valgrind on. Instead, we should pass GIT_TEST_OPTS on the command-line, overriding what's in config.mak, and take care to append to whatever the user has there already. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-17Merge branch 'ab/i18n-scripts-basic'Libravatar Junio C Hamano1-1/+0
* ab/i18n-scripts-basic: sh-i18n--envsubst.c: do not #include getopt.h
2011-06-17sh-i18n--envsubst.c: do not #include getopt.hLibravatar Brandon Casey1-1/+0
The getopt.h header file is not used. It's inclusion is left over from the original version of this source. Additionally, getopt.h does not exist on all platforms (SunOS 5.7) and will cause a compilation failure. So, let's remove it. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-16Fix typo: existant->existentLibravatar Dmitry Ivankov7-14/+14
refs.c had a error message "Trying to write ref with nonexistant object". And no tests relied on the wrong spelling. Also typo was present in some test scripts internals, these tests still pass. Signed-off-by: Dmitry Ivankov <divanorama@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-16Git 1.7.6-rc2Libravatar Junio C Hamano2-2/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-09gitweb: do not misparse nonnumeric content tag files that contain a digitLibravatar Jonathan Nieder2-1/+9
v1.7.6-rc0~27^2~4 (gitweb: Change the way "content tags" ('ctags') are handled, 2011-04-29) tried to make gitweb's tag cloud feature more intuitive for webmasters by checking whether the ctags/<label> under a project's .git dir contains a number (representing the strength of association to <label>) before treating it as one. With that change, after putting '$feature{'ctags'}{'default'} = [1];' in your $GITWEB_CONFIG, you could do echo Linux >.git/ctags/linux and gitweb would treat that as a request to tag the current repository with the Linux tag, instead of the previous behavior of writing an error page embedded in the projects list that triggers error messages from Chromium and Firefox about malformed XML. Unfortunately the pattern (\d+) used to match numbers is too loose, and the "XML declaration allowed only at the start of the document" error can still be experienced if you write "Linux-2.6" in place of "Linux" in the example above. Fix it by tightening the pattern to ^\d+$. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-08Git 1.7.6-rc1Libravatar Junio C Hamano2-3/+11
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-08Merge branch 'maint'Libravatar Junio C Hamano1-2/+4
* maint: fetch: do not leak a refspec
2011-06-08fetch: do not leak a refspecLibravatar Jim Meyering1-2/+4
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-07Merge branch 'jc/magic-pathspec'Libravatar Junio C Hamano1-6/+6
* jc/magic-pathspec: t3703: skip more tests using colons in file names on Windows
2011-06-07t3703: skip more tests using colons in file names on WindowsLibravatar Alex Riesen1-6/+6
Use the same test and prerequisite as introduced in similar fix in 650af7ae8bdf92bd92df2. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-06Merge branch 'jn/mime-type-with-params'Libravatar Junio C Hamano1-1/+1
* jn/mime-type-with-params: gitweb: Fix usability of $prevent_xss
2011-06-06Merge branch 'jn/gitweb-docs'Libravatar Junio C Hamano2-131/+135
* jn/gitweb-docs: gitweb: Move "Requirements" up in gitweb/INSTALL gitweb: Describe CSSMIN and JSMIN in gitweb/INSTALL gitweb: Move information about installation from README to INSTALL
2011-06-06Merge branch 'jk/diff-not-so-quick'Libravatar Junio C Hamano5-5/+16
* jk/diff-not-so-quick: diff: futureproof "stop feeding the backend early" logic diff_tree: disable QUICK optimization with diff filter Conflicts: diff.c
2011-06-06Merge branch 'bc/maint-status-z-to-use-porcelain'Libravatar Junio C Hamano2-3/+11
* bc/maint-status-z-to-use-porcelain: builtin/commit.c: set status_format _after_ option parsing t7508: demonstrate status's failure to use --porcelain format with -z Conflicts: builtin/commit.c
2011-06-05gitweb: Fix usability of $prevent_xssLibravatar Jakub Narebski1-1/+1
With XSS prevention on (enabled using $prevent_xss), blobs ('blob_plain') of all types except a few known safe ones are served with "Content-Disposition: attachment". However the check was too strict; it didn't take into account optional parameter attributes, media-type = type "/" subtype *( ";" parameter ) as described in RFC 2616 http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17 http://www.w3.org/Protocols/rfc2616/rfc2616-sec3.html#sec3.7 This fixes that, and it for example treats following as safe MIME media type: text/plain; charset=utf-8 Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-03gitweb: Move "Requirements" up in gitweb/INSTALLLibravatar Jakub Narebski1-15/+15
This way you can examine prerequisites at first glance, before detailed instructions on installing gitweb. Straightforward text movement. Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-02gitweb: Describe CSSMIN and JSMIN in gitweb/INSTALLLibravatar Jakub Narebski1-6/+13
The build-time configuration variables JSMIN and CSSMIN were mentioned only in Makefile; add their description to gitweb/INSTALL. This required moving description of GITWEB_JS up, near GITWEB_CSS and just introduced CSMIN and JSMIN. Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-02gitweb: Move information about installation from README to INSTALLLibravatar Jakub Narebski2-116/+113
Almost straightformard moving of "How to configure gitweb for your local system" section from gitweb/README to gitweb/INSTALL, as it is about build time configuration. Updated references to it. Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-01Sync with 1.7.5.4Libravatar Junio C Hamano2-1/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-01Git 1.7.5.4Libravatar Junio C Hamano3-2/+6
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-01Merge branch 'jk/maint-config-alias-fix' into maintLibravatar Junio C Hamano4-48/+30
* jk/maint-config-alias-fix: handle_options(): do not miscount how many arguments were used config: always parse GIT_CONFIG_PARAMETERS during git_config git_config: don't peek at global config_parameters config: make environment parsing routines static
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 23:01:15 +0000