| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When core.sparseCheckoutCone is enabled, the 'git sparse-checkout set'
command takes a list of directories as input, then creates an ordered
list of sparse-checkout patterns such that those directories are
recursively included and all sibling entries along the parent directories
are also included. Listing the patterns is less user-friendly than the
directories themselves.
In cone mode, and as long as the patterns match the expected cone-mode
pattern types, change the output of 'git sparse-checkout list' to only
show the directories that created the patterns.
With this change, the following piped commands would not change the
working directory:
git sparse-checkout list | git sparse-checkout set --stdin
The only time this would not work is if core.sparseCheckoutCone is
true, but the sparse-checkout file contains patterns that do not
match the expected pattern types for cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On FreeBSD, when executed by root ls enables the '-A' option:
-A Include directory entries whose names begin with a dot (`.')
except for . and ... Automatically set for the super-user unless
-I is specified.
As a result the .git directory appeared in the output when run as root.
Simulate no-dotfile ls behaviour using a shell glob.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ed Maste <emaste@FreeBSD.org>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a user uses the sparse-checkout feature in cone mode, they
add patterns using "git sparse-checkout set <dir1> <dir2> ..."
or by using "--stdin" to provide the directories line-by-line over
stdin. This behaviour naturally looks a lot like the way a user
would type "git add <dir1> <dir2> ..."
If core.ignoreCase is enabled, then "git add" will match the input
using a case-insensitive match. Do the same for the sparse-checkout
feature.
Perform case-insensitive checks while updating the skip-worktree
bits during unpack_trees(). This is done by changing the hash
algorithm and hashmap comparison methods to optionally use case-
insensitive methods.
When this is enabled, there is a small performance cost in the
hashing algorithm. To tease out the worst possible case, the
following was run on a repo with a deep directory structure:
git ls-tree -d -r --name-only HEAD |
git sparse-checkout set --stdin
The 'set' command was timed with core.ignoreCase disabled or
enabled. For the repo with a deep history, the numbers were
core.ignoreCase=false: 62s
core.ignoreCase=true: 74s (+19.3%)
For reproducibility, the equivalent test on the Linux kernel
repository had these numbers:
core.ignoreCase=false: 3.1s
core.ignoreCase=true: 3.6s (+16%)
Now, this is not an entirely fair comparison, as most users
will define their sparse cone using more shallow directories,
and the performance improvement from eb42feca97 ("unpack-trees:
hash less in cone mode" 2019-11-21) can remove most of the
hash cost. For a more realistic test, drop the "-r" from the
ls-tree command to store only the first-level directories.
In that case, the Linux kernel repository takes 0.2-0.25s in
each case, and the deep repository takes one second, plus or
minus 0.05s, in each case.
Thus, we _can_ demonstrate a cost to this change, but it is
unlikely to matter to any reasonable sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The index-merge performed by 'git sparse-checkout' will erase any staged
changes, which can lead to data loss. Prevent these attempts by requiring
a clean 'git status' output.
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git sparse-checkout init' subcommand previously wrote directly
to the sparse-checkout file and then updated the working directory.
This may fail if there are modified files not included in the initial
pattern set. However, that left a populated sparse-checkout file.
Use the in-process working directory update to guarantee that the
init subcommand only changes the sparse-checkout file if the working
directory update succeeds.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During the development of the sparse-checkout "cone mode" feature,
an incorrect placement of the initializer for "use_cone_patterns = 1"
caused warnings to show up when a .gitignore file was present with
non-cone-mode patterns. This was fixed in the original commit
introducing the cone mode, but now we should add a test to avoid
hitting this problem again in the future.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If two 'git sparse-checkout set' subcommands are launched at the
same time, the behavior can be unexpected as they compete to write
the sparse-checkout file and update the working directory.
Take a lockfile around the writes to the sparse-checkout file. In
addition, acquire this lock around the working directory update
to avoid two commands updating the working directory in different
ways.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git sparse-checkout disable' subcommand returns a user to a
full working directory. The old process for doing this required
updating the sparse-checkout file with the "/*" pattern and then
updating the working directory with core.sparseCheckout enabled.
Finally, the sparse-checkout file could be removed and the config
setting disabled.
However, it is valuable to keep a user's sparse-checkout file
intact so they can re-enable the sparse-checkout they previously
used with 'git sparse-checkout init'. This is now possible with
the in-process mechanism for updating the working directory.
Reported-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse-checkout builtin used 'git read-tree -mu HEAD' to update the
skip-worktree bits in the index and to update the working directory.
This extra process is overly complex, and prone to failure. It also
requires that we write our changes to the sparse-checkout file before
trying to update the index.
Remove this extra process call by creating a direct call to
unpack_trees() in the same way 'git read-tree -mu HEAD' does. In
addition, provide an in-memory list of patterns so we can avoid
reading from the sparse-checkout file. This allows us to test a
proposed change to the file before writing to it.
An earlier version of this patch included a bug when the 'set' command
failed due to the "Sparse checkout leaves no entry on working directory"
error. It would not rollback the index.lock file, so the replay of the
old sparse-checkout specification would fail. A test in t1091 now
covers that scenario.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a user provides folders A/ and A/B/ for inclusion in a cone-mode
sparse-checkout file, the parsing logic will notice that A/ appears
both as a "parent" type pattern and as a "recursive" type pattern.
This is unexpected and hence will complain via a warning and revert
to the old logic for checking sparse-checkout patterns.
Prevent this from happening accidentally by sanitizing the folders
for this type of inclusion in the 'git sparse-checkout' builtin.
This happens in two ways:
1. Do not include any parent patterns that also appear as recursive
patterns.
2. Do not include any recursive patterns deeper than other recursive
patterns.
In order to minimize duplicate code for scanning parents, create
hashmap_contains_parent() method. It takes a strbuf buffer to
avoid reallocating a buffer when calling in a tight loop.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a large repository has many sparse-checkout patterns, the
process for updating the skip-worktree bits can take long enough
that a user gets confused why nothing is happening. Update the
clear_ce_flags() method to write progress.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse-checkout feature in "cone mode" can use the fact that
the recursive patterns are "connected" to the root via parent
patterns to decide if a directory is entirely contained in the
sparse-checkout or entirely removed.
In these cases, we can skip hashing the paths within those
directories and simply set the skipworktree bit to the correct
value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To make the cone pattern set easy to use, update the behavior of
'git sparse-checkout (init|set)'.
Add '--cone' flag to 'git sparse-checkout init' to set the config
option 'core.sparseCheckoutCone=true'.
When running 'git sparse-checkout set' in cone mode, a user only
needs to supply a list of recursive folder matches. Git will
automatically add the necessary parent matches for the leading
directories.
When testing 'git sparse-checkout set' in cone mode, check the
error stream to ensure we do not see any errors. Specifically,
we want to avoid the warning that the patterns do not match
the cone-mode patterns.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parent and recursive patterns allowed by the "cone mode"
option in sparse-checkout are restrictive enough that we
can avoid using the regex parsing. Everything is based on
prefix matches, so we can use hashsets to store the prefixes
from the sparse-checkout file. When checking a path, we can
strip path entries from the path and check the hashset for
an exact match.
As a test, I created a cone-mode sparse-checkout file for the
Linux repository that actually includes every file. This was
constructed by taking every folder in the Linux repo and creating
the pattern pairs here:
/$folder/
!/$folder/*/
This resulted in a sparse-checkout file sith 8,296 patterns.
Running 'git read-tree -mu HEAD' on this file had the following
performance:
core.sparseCheckout=false: 0.21 s (0.00 s)
core.sparseCheckout=true: 3.75 s (3.50 s)
core.sparseCheckoutCone=true: 0.23 s (0.01 s)
The times in parentheses above correspond to the time spent
in the first clear_ce_flags() call, according to the trace2
performance traces.
While this example is contrived, it demonstrates how these
patterns can slow the sparse-checkout feature.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse-checkout feature can have quadratic performance as
the number of patterns and number of entries in the index grow.
If there are 1,000 patterns and 1,000,000 entries, this time can
be very significant.
Create a new Boolean config option, core.sparseCheckoutCone, to
indicate that we expect the sparse-checkout file to contain a
more limited set of patterns. This is a separate config setting
from core.sparseCheckout to avoid breaking older clients by
introducing a tri-state option.
The config option does nothing right now, but will be expanded
upon in a later commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When Git updates the working directory with the sparse-checkout
feature enabled, the unpack_trees() method calls clear_ce_flags()
to update the skip-wortree bits on the cache entries. This
check can be expensive, depending on the patterns used.
Add trace2 regions around the method, including some flag
information, so we can get granular performance data during
experiments. This data will be used to measure improvements
to the pattern-matching algorithms for sparse-checkout.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The instructions for disabling a sparse-checkout to a full
working directory are complicated and non-intuitive. Add a
subcommand, 'git sparse-checkout disable', to perform those
steps for the user.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git sparse-checkout set' subcommand takes a list of patterns
and places them in the sparse-checkout file. Then, it updates the
working directory to match those patterns. For a large list of
patterns, the command-line call can get very cumbersome.
Add a '--stdin' option to instead read patterns over standard in.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git sparse-checkout set' subcommand takes a list of patterns
as arguments and writes them to the sparse-checkout file. Then, it
updates the working directory using 'git read-tree -mu HEAD'.
The 'set' subcommand will replace the entire contents of the
sparse-checkout file. The write_patterns_and_update() method is
extracted from cmd_sparse_checkout() to make it easier to implement
'add' and/or 'remove' subcommands in the future.
If the core.sparseCheckout config setting is disabled, then enable
the config setting in the worktree config. If we set the config
this way and the sparse-checkout fails, then re-disable the config
setting.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When someone wants to clone a large repository, but plans to work
using a sparse-checkout file, they either need to do a full
checkout first and then reduce the patterns they included, or
clone with --no-checkout, set up their patterns, and then run
a checkout manually. This requires knowing a lot about the repo
shape and how sparse-checkout works.
Add a new '--sparse' option to 'git clone' that initializes the
sparse-checkout file to include the following patterns:
/*
!/*/
These patterns include every file in the root directory, but
no directories. This allows a repo to include files like a
README or a bootstrapping script to grow enlistments from that
point.
During the 'git sparse-checkout init' call, we must first look
to see if HEAD is valid, since 'git clone' does not have a valid
HEAD at the point where it initializes the sparse-checkout. The
following checkout within the clone command will create the HEAD
ref and update the working directory correctly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Getting started with a sparse-checkout file can be daunting. Help
users start their sparse enlistment using 'git sparse-checkout init'.
This will set 'core.sparseCheckout=true' in their config, write
an initial set of patterns to the sparse-checkout file, and update
their working directory.
Make sure to use the `extensions.worktreeConfig` setting and write
the sparse checkout config to the worktree-specific config file.
This avoids confusing interactions with other worktrees.
The use of running another process for 'git read-tree' is sub-
optimal. This will be removed in a later change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test updates to prepare for SHA-2 transition continues.
* bc/hash-independent-tests-part-6:
t4048: abstract away SHA-1-specific constants
t4045: make hash-size independent
t4044: update test to work with SHA-256
t4039: abstract away SHA-1-specific constants
t4038: abstract away SHA-1 specific constants
t4034: abstract away SHA-1-specific constants
t4027: make hash-size independent
t4015: abstract away SHA-1-specific constants
t4011: abstract away SHA-1-specific constants
t4010: abstract away SHA-1-specific constants
t3429: remove SHA1 annotation
t1305: avoid comparing extensions
rev-parse: add a --show-object-format option
t/oid-info: add empty tree and empty blob values
t/oid-info: allow looking up hash algorithm name
|
|
"git stash save" in a working tree that is sparsely checked out
mistakenly removed paths that are outside the area of interest.
* js/update-index-ignore-removal-for-skip-worktree:
stash: handle staged changes in skip-worktree files correctly
update-index: optionally leave skip-worktree entries alone
|
|
The custom format for "git log --format=<format>" learned the l/L
placeholder that is similar to e/E that fills in the e-mail
address, but only the local part on the left side of '@'.
* pb/pretty-email-without-domain-part:
pretty: add "%aL" etc. to show local-part of email addresses
t4203: use test-lib.sh definitions
t6006: use test-lib.sh definitions
|
|
Docfix.
* hw/remove-api-docs-placeholder:
documentation: remove empty doc files
|
|
Message fix.
* sg/commit-graph-usage-fix:
builtin/commit-graph.c: remove subcommand-less usage string
|
|
"git apply --3way" learned to honor merge.conflictStyle
configuration variable, like merges would.
* dl/apply-3way-diff3:
apply: respect merge.conflictStyle in --3way
t4108: demonstrate bug in apply
t4108: use `test_config` instead of `git config`
t4108: remove git command upstream of pipe
t4108: replace create_file with test_write_lines
|
|
Code clean-up and a bugfix in the logic used to tell worktree local
and repository global refs apart.
* sg/dir-trie-fixes:
path.c: don't call the match function without value in trie_find()
path.c: clarify two field names in 'struct common_dir'
path.c: mark 'logs/HEAD' in 'common_list' as file
path.c: clarify trie_find()'s in-code comment
Documentation: mention more worktree-specific exceptions
|
|
Doc update.
* jc/am-show-current-patch-docfix:
doc: am --show-current-patch gives an entire e-mail message
|
|
The code to generate multi-pack index learned to show (or not to
show) progress indicators.
* wb/midx-progress:
multi-pack-index: add [--[no-]progress] option.
midx: honor the MIDX_PROGRESS flag in midx_repack
midx: honor the MIDX_PROGRESS flag in verify_midx_file
midx: add progress to expire_midx_packs
midx: add progress to write_midx_file
midx: add MIDX_PROGRESS flag
|
|
When all files from some subdirectory were renamed to the root
directory, the directory rename heuristics would fail to detect that
as a rename/merge of the subdirectory to the root directory, which has
been corrected.
* en/merge-recursive-directory-rename-fixes:
t604[236]: do not run setup in separate tests
merge-recursive: fix merging a subdirectory into the root directory
merge-recursive: clean up get_renamed_dir_portion()
|
|
"git rebase --preserve-merges" has been marked as deprecated; this
release stops advertising it in the "git rebase -h" output.
* js/rebase-deprecate-preserve-merges:
rebase: hide --preserve-merges option
|
|
Move the definition of a set of bitmask constants from 0ctal
literal to (1U<<count) notation.
* hv/bitshift-constants-in-blame:
builtin/blame.c: constants into bit shift format
|
|
"git notes copy $original" ought to copy the notes attached to the
original object to HEAD, but a mistaken tightening to command line
parameter validation made earlier disabled that feature by mistake.
* dd/notes-copy-default-dst-to-head:
notes: fix minimum number of parameters to "copy" subcommand
t3301: test diagnose messages for too few/many paramters
|
|
"rebase -i" ceased to run post-commit hook by mistake in an earlier
update, which has been corrected.
* pw/post-commit-from-sequencer:
sequencer: run post-commit hook
move run_commit_hook() to libgit and use it there
sequencer.h fix placement of #endif
t3404: remove uneeded calls to set_fake_editor
t3404: set $EDITOR in subshell
t3404: remove unnecessary subshell
|
|
The branch description ("git branch --edit-description") has been
used to fill the body of the cover letters by the format-patch
command; this has been enhanced so that the subject can also be
filled.
* dl/format-patch-cover-from-desc:
format-patch: teach --cover-from-description option
format-patch: use enum variables
format-patch: replace erroneous and condition
|
|
A tutorial on object enumeration.
* es/walken-tutorial:
documentation: add tutorial for object walking
|
|
Debugging support for lazy cloning has been a bit improved.
* jt/fetch-pack-record-refs-in-the-dot-promisor:
fetch-pack: write fetched refs to .promisor
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Finishing touches to the recent update to the build procedure for
the documentation.
* bc/doc-use-docbook-5:
manpage-bold-literal.xsl: match for namespaced "d:literal" in template
|
|
Regression fix.
* ds/commit-graph-on-fetch:
commit-graph: fix writing first commit-graph during fetch
t5510-fetch.sh: demonstrate fetch.writeCommitGraph bug
|
|
Work-around a lazy fetch glitch.
* jt/delay-fetch-if-missing:
fetch: delay fetch_if_missing=0 until after config
|
|
* https://github.com/prati0100/git-gui:
git-gui: improve Japanese translation
git-gui: add a readme
git-gui: support for diff3 conflict style
git-gui: use existing interface to query a path's attribute
git-gui (Windows): use git-bash.exe if it is available
treewide: correct several "up-to-date" to "up to date"
Fix build with core.autocrlf=true
|
|
l10n-2.24.0-rnd2
* tag 'l10n-2.24.0-rnd2' of https://github.com/git-l10n/git-po:
l10n: zh_CN: for git v2.24.0 l10n round 1~2
l10n: de.po: Update German translation
l10n: sv.po: Update Swedish translation (4695t0f0u)
l10n: bg.po: Updated Bulgarian translation (4694)
l10n: vi(4694t): Updated translation for v2.24.0
l10n: es: 2.24.0 round 2
l10n: it.po: update the Italian translation for Git 2.24.0 round #2
l10n: fr v2.24.0 rnd2
l10n: git.pot: v2.24.0 round 2 (1 new)
l10n: it.po: update the Italian translation for Git 2.24.0
l10n: fr 2.24.0 rnd 1
l10n: git.pot: v2.24.0 round 1 (35 new, 16 removed)
l10n: bg.po: Updated Bulgarian translation (4693)
l10n: sv.po: Update Swedish translation (4674t0f0u)
l10n: Update Catalan translation
|
|
Translate 36 new messages (4694t0f0u) for git 2.24.0.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
When calling `git stash` while changes were staged for files that are
marked with the `skip-worktree` bit (e.g. files that are excluded in a
sparse checkout), the files are recorded as _deleted_ instead.
The reason is that `git stash` tries to construct the tree reflecting
the worktree essentially by copying the index to a temporary one and
then updating the files from the worktree. Crucially, it calls `git
diff-index` to update also those files that are in the HEAD but have
been unstaged in the index.
However, when the temporary index is updated via `git update-index --add
--remove`, skip-worktree entries mark the files as deleted by mistake.
Let's use the newly-introduced `--ignore-skip-worktree-entries` option
of `git update-index` to prevent exactly this from happening.
Note that the regression test case deliberately avoids replicating the
scenario described above and instead tries to recreate just the symptom.
Reported by Dan Thompson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While `git update-index` mostly ignores paths referring to index entries
whose skip-worktree bit is set, in b4d1690df11 (Teach Git to respect
skip-worktree bit (reading part), 2009-08-20), for reasons that are not
entirely obvious, the `--remove` option was made special: it _does_
remove index entries even if their skip-worktree bit is set.
Seeing as this behavior has been in place for a decade now, it does not
make sense to change it.
However, in preparation for fixing a bug in `git stash` where it
pretends that skip-worktree entries have actually been removed, we need
a mode where `git update-index` leaves all skip-worktree entries alone,
even if the `--remove` option was passed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As per Wikipedia, "In current technical usage, for one to state that a
feature is deprecated is merely a recommendation against using it." It
is thus contradictory to claim that something is not "officially
deprecated" and then to immediately state that we are both discouraging
its use and pointing people elsewhere.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Derrick Stolee
Ed Maste
Jeff Hostetler
Junio C Hamano
Jiang Xin
Johannes Schindelin
Elijah Newren