| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
with minor hand resolving on git-tag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It appears in the git-status output during a git-commit if you have
something in info/exclude.
Also for .cmitmsg and .cmitchk to make git-commit work
in read-only working trees.
[jc: while we are at it, I removed the use of .cmitchk temporary
file which was not necessary, and renamed them -- they are out
of way now and do not have to be dotfiles anymore.]
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Two else equal patches should not result in different checksums, only
because they were applied to different versions of the file.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It currently exits printing "git-cat-file SHA1: bad file", while
instead we must just abort the verification for light-weight
tags (e.g. referring to commit objects).
[jc: tag objects can tag anything not just commits, so I fixed
up the original patch slightly. you should be able to validate
a signed tag that points at a blob object. ]
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The platform specific tweaking part was using 'uname -o' which
is not always available. Squelch error message from it.
It was suggested to chain the if..else, but I chose not to, because
maintaining the nested if..else if..else..endif endif to match is a
pain. If we had "elif", things would have been different, though.
While we are at it, try not to invoke 'uname -s' for each platform
candidate.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The dependency rule in templates directory forced 'make install'
that immediately followed 'make all' to rebuild boilerplates.
This was problematic for a workflow that built first as yourself
and then installed as root, from a working tree that is on an
NFS mounted filesystem that is unwritable by root.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
exports $prefix and makes Documentation/Makefile following it also.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We do not write through our use of mmap(), so make sure callers pass
MAP_PRIVATE and remove support for writing changes back.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Since some platforms do not support mmap() at all, and others do only just
so, this patch introduces the option to fake mmap() and munmap() by
malloc()ing and read()ing explicitely.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Modify parse_object_cheap() to also free all the entries from the tree
data structures.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes it possible to have a "sparse" git object subdirectory
structure, something that has become much more attractive now that people
use pack-files all the time.
As a result of pack-files, a git object directory doesn't necessarily have
any individual objects lying around, and in that case it's just wasting
space to keep the empty first-level object directories around: on many
filesystems the 256 empty directories will be aboue 1MB of diskspace.
Even more importantly, after you re-pack a project that _used_ to be
unpacked, you could be left with huge directories that no longer contain
anything, but that waste space and take time to look through.
With this change, "git prune-packed" can just do an rmdir() on the
directories, and they'll get removed if empty, and re-created on demand.
This patch also tries to fix up "write_sha1_from_fd()" to use the new
common infrastructure for creating the object files, closing a hole where
we might otherwise leave half-written objects in the object database.
[jc: I unoptimized the part that really removes the fan-out directories
to ease transition. init-db still wastes 1MB of diskspace to hold 256
empty fan-outs, and prune-packed rmdir()'s the grown but empty directories,
but runs mkdir() immediately after that -- reducing the saving from 150KB
to 146KB. These parts will be re-introduced when everybody has the
on-demand capability.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Borrow from NO_MMAP patch by Johannes, squelch compiler warnings by
declaring gitstrcasestr() when we use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
git-status truncates filenames up to the first occurrence of a whitespace
character when displaying. More precisely, it displays the filename up to any
field seperator defined in $IFS.
This patch fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch fixes a bug in git-ls-tree in which the wrong filenames are
listed if the exact same file and directory contents are present in
another location in the tree.
Added a new series of test cases for directory and filename handling.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This updates last place where checkout-cache gets mentioned wrongly
for checkout-index.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It reorganizes the code and also has saner command line options
syntax. Unlike git-applymbox, it can take more than one mailbox
file from the command line, as well as reading from the standard
input when '-' is specified.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add an new option --show-index-info to git-apply command to
summarize the index information new git-diff outputs. The
command shows something similar to git-ls-files --stage output
for the pre-change image:
100644 7be5041... apply.c
100644 ec2a161... cache.h
...
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds more cruft to diff --git header to record the blob SHA1 and
the mode the patch/diff is intended to be applied against, to help the
receiving end fall back on a three-way merge. The new header looks
like this:
diff --git a/apply.c b/apply.c
index 7be5041..8366082 100644
--- a/apply.c
+++ b/apply.c
@@ -14,6 +14,7 @@
// files that are being modified, but doesn't apply the patch
// --stat does just a diffstat, and doesn't actually apply
+// --show-index-info shows the old and new index info for...
...
Upon receiving such a patch, if the patch did not apply cleanly to the
target tree, the recipient can try to find the matching old objects in
her object database and create a temporary tree, apply the patch to
that temporary tree, and attempt a 3-way merge between the patched
temporary tree and the target tree using the original temporary tree
as the common ancestor.
The patch lifts the code to compute the hash for an on-filesystem
object from update-index.c and makes it available to the diff output
routine.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When mbox argument is missing, read the mailbox from the standard
input.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Instead of the default 4 digits with leading zeros, different precision
can be specified for the generated filenames.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This new flag generates the mbox formatted output to the standard
output, instead of saving them into a file per patch and implies --mbox.
It also fixes a corner case where the commit does not have *any* message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When you are applying 200 mails in sequence, .dotest/ directory
will be littered with many messsages, and when the patch in one
of them fails to apply, it is not obvious which message was
being processed. Remove the one that has been already dealt
with, so that the last failed one is found typically as the
lowest numbered split message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
After git-apply fails, attempt to find a base tree that the patch
cleanly applies to, and do a three-way merge using that base tree into
the current index, if .dotest/.3way file exists. This flag can be
controlled by giving -m flag to git-applymbox command.
When the fall-back merge fails, the working tree can be resolved the
same way as you would normally hand resolve a conflicting merge.
When making commit, use .dotest/final-commit as the log message
template. Or you could just choose to 'git-checkout-index -f -a'
to revert the failed merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The current "git tag -s" thing always uses the tagger name as the signing
user key, which is very irritating, since my key is under my email
address, but the tagger key obviously contains the actual machine name
too.
Now, I could just use "GIT_COMMITTER_EMAIL" and force it to be my real
email, but I actually think that it's nice to see which machine I use for
my work.
So rather than force my tagger ID to have to match the gpg key name, just
support the "-u" flag to "git tag" instead. It implicitly enables signing,
since it doesn't make any sense without it. Thus:
git tag -u <gpg-key-name> <tag-name> [<tagged-object>]
will use the named gpg key for signing.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The scripts work perfectly without a repository.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In addition to hardcoded list of kernel people, read from .mailmap file
the list of email-to-name translations. Modernize regexps here and there
minimally while at it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
... but using a {caret} attribute.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This was the last instance of symlink() in coreish part.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Typos, light editing and clarifications.
Signed-off-by: Christian Meder <chris@absolutegiganten.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Cloning from a repository with more than 256 refs (heads and tags
included) will choke, because upload-pack has a built-in limit of
feeding not more than MAX_NEEDS (currently 256) heads to underlying
git-rev-list. This is a problem when cloning a repository with many
tags, like http://www.linux-mips.org/pub/scm/linux.git, which has 290+
tags.
This commit introduces a new flag, --all, to git-rev-list, to include
all refs in the repository. Updated upload-pack detects requests that
ask more than MAX_NEEDS refs, and sends everything back instead.
We may probably want to tweak the definitions of MAX_NEEDS and
MAX_HAS, but that is a separate topic.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Use the correct buffer when validating 'ref: refs/...'
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
files atexit
Set up atexit only if the .lock-file was opened successfully.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When we updated the marker for new files from 'N' to 'A', we forgot to
notice that the letter is already taken by the All-Or-None mark.
Change the All-Or-None marker to '*' to resolve this conflict.
git-diff-tree -r --diff-filter='R*' -M
shows all the changes (not just renames) that are contained in commits
that have renames, in comparison with:
git-diff-tree -r --diff-filter='R' -M
shows the same set of changes but the diff output are limited only to
renaming changes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also note which version of GIT produced the patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
- Defined variable $INFO was not used properly.
- Make sure there is an empty line between the sign-off and the
log message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The original plan was to do 3-way merge between local working tree,
index and the patch being applied, but that was never implemented.
Retire the flag to control its behaviour.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch teaches 'git-apply --index' to automatically check
out a file being patched. This happens only when the working
tree does not have it checked out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Without -f flag, 'git-checkout-index foo.c' issued an error message
when foo.c already existed in the working tree and did not match index.
However it did not return an error from the underlying checkout_entry()
function and resulted in a successful exit(0).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
There was a leftover use of sed that attempted to remove the commit ID
output from git-diff-tree, which turned into an expensive no-op when
git-diff-tree output header format changed about three months ago.
Drop it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Santi_Béjar
Kai Ruemmler
Paolo 'Blaisorblade' Giarrusso
Johannes Schindelin
robfitz@273k.net
Linus Torvalds
Alex Riesen
Jonas Fonseca
Christian Meder