| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Once upon a time, git-clone would refuse to write into a
directory that it did not itself create. The cleanup
routines for a failed clone could therefore just remove the
git and worktree dirs completely.
In 55892d2398 (Allow cloning to an existing empty directory,
2009-01-11), we learned to write into an existing directory.
Which means that doing:
mkdir foo
git clone will-fail foo
ends up deleting foo. This isn't a huge catastrophe, since
by definition foo must be empty. But it's somewhat
confusing; we should leave the filesystem as we found it.
Because we know that the only directory we'll write into is
an empty one, we can handle this case by just passing the
KEEP_TOPLEVEL flag to our recursive delete (if we could
write into populated directories, we'd have to keep track of
what we wrote and what we did not, which would be much
harder).
Note that we need to handle the work-tree and git-dir
separately, though, as only one might exist (and the new
tests in t5600 cover all cases).
Reported-by: Stephan Janssen <sjanssen@you-get.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two parts of git-clone's setup logic check whether a
directory exists, and they both call stat directly with the
same scratch "struct stat" buffer. Let's pull that into a
helper, which has a few advantages:
- it makes the purpose of the stat calls more obvious
- it makes it clear that we don't care about the
information in "buf" remaining valid
- if we later decide to make the check more robust (e.g.,
complaining about non-directories), we can do it in one
place
Note that we could just use file_exists() for this, which
has identical code. But we specifically care about
directories, so this future-proofs us against that function
later getting more picky about seeing actual files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is an old script which could use some updating before
we add to it:
- use the standard line-breaking:
test_expect_success 'title' '
body
'
- run all code inside test_expect blocks to catch
unexpected failures in setup steps
- use "test_commit -C" instead of manually entering
sub-repo
- use test_when_finished for cleanup steps
- test_path_is_* as appropriate
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Back when this test was written, git-clone could not handle
a repository without any commits. These days it works fine,
and this comment is out of date.
At first glance it seems like we could just drop this code
entirely now, but it's necessary for the final test, which
was added later. That test corrupts the repository by
temporarily removing its objects, which means we need to
have some objects to move.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clarify and enhance documentation for "merge-base --fork-point", as
it was clear what it computed but not why/what for.
* jc/merge-base-fork-point-doc:
merge-base --fork-point doc: clarify the example and failure modes
|
|
A few scripts (both in production and tests) incorrectly redirected
their error output. These have been corrected.
* tz/redirect-fix:
rebase: fix stderr redirect in apply_autostash()
t/lib-gpg: fix gpgconf stderr redirect to /dev/null
|
|
"git notes" sent its error message to its standard output stream,
which was corrected.
* tz/notes-error-to-stderr:
notes: send "Automatic notes merge failed" messages to stderr
|
|
The three-way merge performed by "git cherry-pick" was confused
when a new submodule was added in the meantime, which has been
fixed (or "papered over").
* sb/test-cherry-pick-submodule-getting-in-a-way:
merge-recursive: handle addition of submodule on our side of history
t/3512: demonstrate unrelated submodule/file conflict as cherry-pick failure
|
|
The sequencer machinery (used by "git cherry-pick A..B", and "git
rebase -i", among other things) would have lost a commit if stopped
due to an unlockable index file, which has been fixed.
* pw/sequencer-recover-from-unlockable-index:
sequencer: reschedule pick if index can't be locked
|
|
"git apply --inaccurate-eof" when used with "--ignore-space-change"
triggered an internal sanity check, which has been fixed.
* rs/apply-inaccurate-eof-with-incomplete-line:
apply: update line lengths for --inaccurate-eof
|
|
Command line completion (in contrib/) has been taught about the
"--copy" option of "git branch".
* tz/complete-branch-copy:
completion: add '--copy' option to 'git branch'
|
|
When "git rebase" prepared an mailbox of changes and fed it to "git
am" to replay them, it was confused when a stray "From " happened
to be in the log message of one of the replayed changes. This has
been corrected.
* ew/rebase-mboxrd:
rebase: use mboxrd format to avoid split errors
|
|
Code clean-up.
* sd/branch-copy:
config: avoid "write_in_full(fd, buf, len) != len" pattern
|
|
Contrary to the documentation, "git pull -4/-6 other-args" did not
ask the underlying "git fetch" to go over IPv4/IPv6, which has been
corrected.
* sw/pull-ipv46-passthru:
pull: pass -4/-6 option to 'git fetch'
|
|
The SubmittingPatches document has been converted to produce an
HTML version via AsciiDoc/Asciidoctor.
* bc/submitting-patches-in-asciidoc:
Documentation: convert SubmittingPatches to AsciiDoc
Documentation: enable compat-mode for Asciidoctor
|
|
Recent update to the refs infrastructure implementation started
rewriting packed-refs file more often than before; this has been
optimized again for most trivial cases.
* mh/avoid-rewriting-packed-refs:
files-backend: don't rewrite the `packed-refs` file unnecessarily
t1409: check that `packed-refs` is not rewritten unnecessarily
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There was a recent semantic mismerge in the codepath to write out a
section of a configuration section, which has been corrected.
* rs/config-write-section-fix:
config: flip return value of write_section()
|
|
We've been waiting long enough, a few more would not hurt ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leak fixes.
* ma/reduce-heads-leakfix:
reduce_heads: fix memory leaks
builtin/merge-base: free commit lists
|
|
Leak fixes.
* ma/bisect-leakfix:
bisect: fix memory leak when returning best element
bisect: fix off-by-one error in `best_bisection_sorted()`
bisect: fix memory leak in `find_bisection()`
bisect: change calling-convention of `find_bisection()`
|
|
A fix for an ancient bug in "git apply --ignore-space-change" codepath.
* rs/apply-fuzzy-match-fix:
apply: avoid out-of-bounds access in fuzzy_matchlines()
|
|
Doc update around use of "format-patch --subject-prefix" etc.
* ad/submitting-patches-title-decoration:
doc/SubmittingPatches: correct subject guidance
|
|
Error checking in "git imap-send" for empty response has been
improved.
* rs/imap-send-next-arg-fix:
imap-send: handle missing response codes gracefully
imap-send: handle NULL return of next_arg()
|
|
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rs/sequencer-rewrite-file-cleanup:
sequencer.c: check return value of close() in rewrite_file()
sequencer: use O_TRUNC to truncate files
sequencer: factor out rewrite_file()
|
|
A test update.
* cb/t4201-robustify:
t4201: make use of abbreviation in the test more robust
|
|
Replace the mailing address of FSF to a URL, as FSF prefers.
* tz/fsf-address-update:
Replace Free Software Foundation address in license notices
Replace Free Software Foundation address in license notices
|
|
Typofix.
* ad/rebase-i-serie-typofix:
rebase -i: fix comment typo
|
|
We used to add an empty alternate object database to the system
that does not help anything; it has been corrected.
* jk/info-alternates-fix:
link_alt_odb_entries: make empty input a noop
|
|
Building with NO_LIBPCRE1_JIT did not disable it, which has been fixed.
* ab/pcre-v2:
grep: fix NO_LIBPCRE1_JIT to fully disable JIT
|
|
Some error messages did not quote filenames shown in it, which have
been fixed.
* sr/wrapper-quote-filenames:
wrapper.c: consistently quote filenames in error messages
|
|
"git rebase -i" recently started misbehaving when a submodule that
is configured with 'submodule.<name>.ignore' is dirty; this has
been corrected.
* bw/rebase-i-ignored-submodule-fix:
wt-status: actually ignore submodules when requested
|
|
The -4/-6 option should be passed through to 'git fetch' to be
consistent with the man page.
Signed-off-by: Wei Shuyu <wsy@dogben.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
d9bd4cbb9cc (config: flip return value of store_write_*()) made
write_section() follow the convention of write(2) to return -1 on error
and the number of written bytes on success. 3b48045c6c7 (Merge branch
'sd/branch-copy') changed it back to returning 0 on error and 1 on
success, but left its callers still checking for negative values.
Let write_section() follow the convention of write(2) again to meet the
expectations of its callers.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The mboxrd format allows the use of embedded "From " lines in
commit messages without being misinterpreted by mailsplit
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some diff implementations don't report missing newlines at the end of
files. Applying such a patch can cause a newline character to be
added inadvertently. The option --inaccurate-eof of git apply can be
used to remove trailing newlines if needed.
apply_one_fragment() cuts it off from the buffers for preimage and
postimage. Before it does, it builds an array with the lengths of each
line for both. Make sure to update the length of the last line in
these line info structures as well to keep them consistent with their
respective buffer.
Without this fix the added test fails; git apply dies and reports:
fatal: BUG: caller miscounted postlen: asked 1, orig = 1, used = 2
That sanity check is only called if whitespace changes are ignored.
Reported-by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 52d59cc645 (branch: add a --copy (-c) option to go with --move (-m),
2017-06-18), `git branch` learned a `--copy` option. Include it when
providing command completions.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the index cannot be locked in do_recursive_merge(), issue an
error message and go on to the error recovery codepath, instead of
dying. When the commit cannot be picked, it needs to be rescheduled
when performing an interactive rebase, but just dying there won't
allow that to happen, and when the user runs 'git rebase --continue'
rather than 'git rebase --abort', the commit gets silently dropped.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
|
|
As explained in commit 06f46f237 (avoid "write_in_full(fd, buf, len)
!= len" pattern, 2017–09–13) the return value of write_in_full() is
either -1 or the requested number of bytes. As such comparing the
return value to an unsigned value such as strbuf.len will fail to
catch errors. Change the code to use the preferred '< 0' check.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code for a newly added path assumed that the path was a normal file,
and thus checked for there being a directory still being in the way of
the file. Note that since unpack_trees() does path-in-the-way checks
already, the only way for there to be a directory in the way at this
point in the code, is if there is some kind of D/F conflict in the merge.
For a submodule addition on HEAD's side of history, the submodule would
have already been present. This means that we do expect there to be a
directory present but should not consider it to be "in the way"; instead,
it's the expected submodule. So, when there's a submodule addition from
HEAD's side, don't bother checking the working copy for a directory in
the way.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ks/mailmap:
mailmap: use Kaartic Sivaraam's new address
|
|
Typofix.
* jm/relnotes-2.15-typofix:
fix typos in 2.15.0 release notes
|
|
Doc update.
* cn/diff-indent-no-longer-is-experimental:
diff: --indent-heuristic is no longer experimental
|
|
MinGW updates.
* js/mingw-redirect-std-handles:
mingw: document the standard handle redirection
mingw: optionally redirect stderr/stdout via the same handle
mingw: add experimental feature to redirect standard handles
|
|
MinGW updates.
* js/wincred-empty-cred:
wincred: handle empty username/password correctly
t0302: check helper can handle empty credentials
|
|
MinGW updates.
* js/mingw-full-version-in-resources:
mingw: include the full version information in the resources
|
Jeff King
Junio C Hamano
Todd Zullinger
Shuyu Wei
René Scharfe
Eric Wong
Phillip Wood
Elijah Newren