| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* maint:
GIT 1.5.2.5
git-add -u paths... now works from subdirectory
Fix "git add -u" data corruption.
|
|
For multi-base merges, we allowed read-tree -m to take more than
three trees (the last two are our and their branches, and all the
earlier ones, typically one but potentially more, are used as the
merge base). Unfortunately, the conversion done by commit 933bf40
broke this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-add -u also takes the path limiters, but unlike the
command without the -u option, the code forgot that it
could be invoked from a subdirectory, and did not correctly
handle the prefix.
Signed-off-by: Salikh Zakirov <salikh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This applies to 'maint' to fix a rather serious data corruption
issue. When "git add -u" affects a subdirectory in such a way
that the only changes to its contents are path removals, the
next tree object written out of that index was bogus, as the
remove codepath forgot to invalidate the cache-tree entry.
Reported by Salikh Zakirov.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Always free .paths if .strdup_paths is set, no matter if the
parameter free_items is set or not, plugging a minor memory leak.
And to clarify the meaning of the flag, rename it to free_util,
since it now only affects the freeing of the .util field.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running git-svn log <ref> -r<rev> against a <ref> other than the
current HEAD did not work if the <rev> was exclusive to the
other branch.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes .gitattributes files to be read from the index when
they are not checked out to the work tree. This is in line with
the way we always allowed low-level tools to operate in sparsely
checked out work tree in a reasonable way.
It swaps the order of new file creation and converting the blob
to work tree representation; otherwise when we are in the middle
of checking out .gitattributes we would notice an empty but
unwritten .gitattributes file in the work tree and will ignore
the copy in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This splits out a common routine that parses a single line of
attribute file and adds it to the attr_stack. It should not
change any behaviour, other than attrs array in the attr_stack
structure is now grown with alloc_nr() macro, instead of one by
one, which relied on xrealloc() to give enough slack to be
efficient enough.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We can now read .gitattributes files out of the index, but the index
must be loaded for this to work.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we compare two non-tracked files, or explicitly
specify --no-index, the suggestion to run git-status
is not helpful.
The patch adds a new diff_options bitfield member, no_index, that
is used instead of the special value of -2 of the rev_info field
max_count to indicate that the index is not to be used. This makes
it possible to pass that flag down to diffcore_skip_stat_unmatch(),
which only has one diff_options parameter.
This could even become a cleanup if we removed all assignments of
max_count to a value of -2 (viz. replacement of a magic value with
a self-documenting field name) but I didn't dare to do that so late
in the rc game..
The no_index bit, if set, then tells diffcore_skip_stat_unmatch()
to not account for any skipped stat-mismatches, which avoids the
suggestion to run git-status.
Signed-off-by: Rene Scharfe <rene.scharfe@lsfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
xmkstemp() performs error checking and prints a standard error message when
an error occur.
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a wrapper for mkstemp() that performs error checking and
calls die() when an error occur.
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Print the index version when an error occurs so the user
knows what type of header (and size) we thought the index
should have had.
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you try to merge a path that involves binary file-level
merge, merge-recursive died rudely without cleaning up its own
mess. A files added by the merge were left in the working tree,
but the index was not written out (because it just punted and
died), so it was cumbersome for the user to retry it by first
running "git reset --hard".
This changes merge-recursive to still warn but do the "binary"
merge for such a path; leave the "our" version in the working
tree, but still keep the path unmerged so that the user can sort
it out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this option git-log prints log message size
just before the corresponding message.
Porcelain tools could use this to speedup parsing
of git-log output.
Note that size refers to log message only. If also
patch content is shown its size is not included.
In case it is not possible to know the size upfront
size value is set to zero.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After starting to edit a working tree file but later when your edit ends
up identical to the original (this can also happen when you ran a
wholesale regexp replace with something like "perl -i" that does not
actually modify many of the paths), "git diff" between the index and the
working tree outputs many "empty" diffs that show "diff --git" headers
and nothing else, because these paths are stat-dirty. While it was a
way to warn the user that the earlier action of the user made the index
ineffective as an optimization mechanism, it was felt too loud for the
purpose of warning even to experienced users, and also resulted in
confusing people new to git.
This replaces the "empty" diffs with a single warning message at the
end. Having many such paths hurts performance, and you can run
"git-update-index --refresh" to update the lstat(2) information recorded
in the index in such a case. "git-status" does so as a side effect, and
that is more familiar to the end-user, so we recommend it to them.
The change affects only "git diff" that outputs patch text, because that
is where the annoyance of too many "empty" diff is most strongly felt,
and because the warning message can be safely ignored by downstream
tools without getting mistaken as part of the patch. For the low-level
"git diff-files" and "git diff-index", the traditional behaviour is
retained.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first thing we teach in the tutorial is to set the default
identity in $HOME/.gitconfig using "git config --global". The
suggestion in the error message should match the order, while
hinting that per repository identity can later be configured
differently.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Quite a few of the scripts are rather careless about using GIT_DIR
while changing directories.
Some try their hands (with different likelihood of success) in making
GIT_DIR absolute.
This patch lets git-sh-setup.sh cater for absolute directories (in a
way that should work reliably also with non-Unix path names) and
removes the respective kludges in git-filter-branch.sh and
git-instaweb.sh.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some repositories started with the trunk in "/" and then moved it to the
standard "trunk/" location.
On these repositories, the correct thing would be to call git-svnimport -T "",
but because of the way the options are handled, it uses the default "trunk"
instead of the given empty string. This patch fixes that behaviour.
Reported by Leandro Lucarella <llucax@gmail.com>.
Signed-off-by: Alberto Bertogli <albertito@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When performing a git-p4 clone operation on a Perforce repository,
where the changelists change in order of magnitude (e.g. 100 to 1000),
the set of changes to import from is not sorted properly. This is
because the data in the list is strings not integers. The other place
where this is done already converts the value to an integer, so it is
not affected.
Acked-by: Simon Hausmann <simon@lst.de>
|
|
As Wincent Colaiuta found out, it's a bit unexpected for git diff to
start a pager even when the --quiet option is specified. The problem
is that the pager hides the return code -- which is the only output
we're interested in in this case.
Push pager setup down into builtin-diff.c and don't start the pager
if --exit-code or --quiet (which implies --exit-code) was specified.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git bundle create" left an invalid, partially written bundle if
an error occured during creation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Windows / cygwin don't support HT, LF, or TAB in file name so this test
is meaningless there.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows to refresh only a subset of the project files, based on
the specified pathspecs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Here-text to create fake-editor did not use <<\EOF but <<EOF,
but there was no point doing so, as it quoted all the variables
anyway. Simplify it.
Also futureproof the special mode to edit COMMIT_EDITMSG file;
it is interested in editing the COMMIT_EDITMSG file in any
GIT_DIR; GIT_DIR may be given as an absolute path.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows jumping to the correct file with the diff-mode commands.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'master' of git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Fix bug causing Tcl error when updating graph
gitk: Fix bug introduced in commit 67a4f1a7
[PATCH] gitk: Show an error and exit if no .git could be found
[PATCH] gitk: Continue and show error message in new repos
[PATCH] gitk: Handle MouseWheel events on Windows
[PATCH] gitk: Enable selected patch text on Windows
gitk: Fix bug causing the "can't unset idinlist(...)" error
gitk: Add a context menu for file list entries
|
|
If "Show nearby tags" is turned off, selecting "Update" from the File
menu will cause a Tcl error. This fixes it. The problem was that
we were calling regetallcommits unconditionally, but it assumed that
getallcommits had been called previously. This also restructures
{re,}getallcommits to be a bit simpler.
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
In fixing the "can't unset idinlist" error, I moved the setting of
idinlist into the loop that splits the parents into "new" parents
(i.e. those of which this is the first child) and "old" parents.
Unfortunately this is incorrect in the case where we hit the break
statement a few lines further down, since when we come back in,
we'll see idinlist($p) set for some parents that aren't in the list.
This fixes it by moving the loop that sets up newolds and oldolds
further down.
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
This is to help people starting gitk from graphical file managers where
the stderr output is hidden.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
If there is no commit made yet, gitk just dumps a Tcl error on stderr,
which sometimes is hard to see. Noticed when gitk was run from Xfce
file manager (thunar's custom action).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Windows, unlike X-Windows, sends mousewheel events by default to the
window that has keyboard focus and uses the MouseWheel event to do so.
The window to be scrolled must be able to take focus, but gitk's panels
are disabled so cannot take focus. For all these reasons, a different
design is needed to use the mousewheel on Windows. The approach here is
to bind the mousewheel events to the top level window and redirect them
based upon the current mouse position.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
On windows, mouse input follows the keyboard focus, so to allow selecting
text from the patch canvas we must not shift focus back to the top level.
This change has no negative impact on X, so we don't explicitly test
for Win32 on this change. This provides similar selection capability
as already available using X-Windows.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Under some circumstances, having duplicate parents in a commit could
trigger a "can't unset idinlist" Tcl error. This fixes the cause
(the logic in layoutrows could end up putting the same commit into
rowidlist twice) and also puts a catch around the unset to ignore
the error.
Thanks to Jeff King for coming up with a test script to generate a
repo that shows the problem.
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
If cmd-list.made has been created by a previous run as root, output
redirection to it will fail. So remove it before regeneration.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
|
|
Signed-off-by: David Kastrup <dak@gnu.org>
|
|
These patches use docbook2x in order to create an info version of the
git user manual. No existing Makefile targets (including "all") are
touched, so you need to explicitly say
make info
sudo make install-info
to get git.info created and installed. If the info target directory
does not already contain a "dir" file, no directory entry is created.
This facilitates $(DESTDIR)-based installations. The same could be
achieved with
sudo make INSTALL_INFO=: install-info
explicitly.
perl is used for patching up sub-par file and directory information in
the Texinfo file. It would be cleaner to place the respective info
straight into user-manual.txt or the conversion configurations, but I
find myself unable to find out how to do this with Asciidoc/Texinfo.
Signed-off-by: David Kastrup <dak@gnu.org>
|
|
* jc/clone:
git-clone: aggressively optimize local clone behaviour.
connect: accept file:// URL scheme
|
|
As mentioned, the three-way case *should* be as trivial as the
following. It passes all the tests, and I verified that a conflicting
merge in the 100,000 file horror-case merged correctly (with the conflict
markers) in 0.687 seconds with this, so it works, but I'm lazy and
somebody else should double-check it [jc: followed all three-way merge
codepaths and verified it removes when it should].
Without this patch, the merge took 8.355 seconds, so this patch
really does make a huge difference for merge performance with lots and
lots of files, and we're not talking percentages, we're talking
orders-of-magnitude differences!
Now "unpack_trees()" is just fast enough that we don't need to avoid it
(although it's probably still a good idea to eventually convert it to use
the traverse_trees() infrastructure some day - just to avoid having
extraneous tree traversal functions).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows (it can't touch open files in any way) the following fails:
git branch -D branch1 branch2
if the both branches are in packed-refs.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This eliminates all use of byte-at-a-time reading of data in this
function: as Junio noted, a bundle file is seekable so we can
reset the file position to the first part of the pack-file using lseek
after reading the header.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-bundle create on cygwin was nearly unusable due to 1 character
at a time (unbuffered) reading from an exec'ed process. Fix by using
fdopen to get a buffered stream.
Results for "time git bundle create test.bdl v1.0.3..v1.5.2" are:
before this patch:
cygwin linux
real 1m38.828s 0m3.578s
user 0m12.122s 0m2.896s
sys 1m28.215s 0m0.692s
after this patch:
real 0m3.688s 0m2.835s
user 0m3.075s 0m2.731s
sys 0m1.075s 0m0.149s
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark Levedahl <mlevedahl@gmail.com> writes:
> Junio C Hamano wrote:
>> While "git bundle" was a useful way to sneakernet incremental
>> changes, we did not allow:
>>
> Thanks - I've been thinking for months I could fix this bug, never
> figured it out and didn't want to nag Dscho one more time. I confirm
> that this allows creation of bundles with arbitrary refs, not just
> those under refs/heads. Yahoo!
Actually, there is another bug nearby.
If you do:
git bundle create v2.6-20-v2.6.22.bndl v2.6.20..v2.6.22
the bundle records that it requires v2.6.20^0 commit (correct)
and gives you tag v2.6.22 (incorrect); the bug is that the
object it lists in fact is the commit v2.6.22^0, not the tag.
This is because the revision range operation .. is always about
set of commits, but the code near where my patch touches does
not validate that the sha1 value obtained from dwim_ref()
against the commit object name e->item->sha1 before placing the
head information in the commit.
The attached patch attempts to fix this problem.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While "git bundle" was a useful way to sneakernet incremental
changes, we did not allow:
$ git bundle create v2.6.20.bndl v2.6.20
to create a bundle that contains the whole history to a
well-known good revision. Such a bundle can be mirrored
everywhere, and people can prime their repository with it to
reduce the load on the repository that serves near the tip of
the development.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Salikh Zakirov
René Scharfe
Eric Wong
Brian Downing
Luiz Fernando N. Capitulino
Marco Costalba
Steffen Prohaska
David Kastrup
Alberto Bertogli
Brian Gernhardt
Reece H. Dunn
Mark Levedahl
Alexandre Julliard
Paul Mackerras
Alex Riesen
Linus Torvalds