| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
verify_bundle() returned with an error early only when all
prerequisite commits were missing. It should error out much
earlier when some are missing.
When the rev-list is limited in ways other than revision range
(e.g. --max-count or --max-age), create_bundle() listed all
positive refs given from the command line as if they are
available, but resulting pack may not have some of them. Add a
logic to make sure all of them are included, and error out
otherwise.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This removes the flag internally used by revision traversal to
decide which commits are indeed boundaries and renames it to
CHILD_SHOWN. builtin-bundle uses the symbol for its
verification, but I think the logic it uses it is wrong. The
flag is still useful but it is local to the git-bundle, so it is
renamed to PREREQ_MARK.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This cleans up the boundary processing in the commit walker. It
- rips out the boundary logic from the commit walker. Placing
"negative" commits in the revs->commits list was Ok if all we
cared about "boundary" was the UNINTERESTING limiting case,
but conceptually it was wrong.
- makes get_revision_1() function to walk the commits and return
the results as if there is no funny postprocessing flags such
as --reverse, --skip nor --max-count.
- makes get_revision() function the postprocessing phase:
If reverse is given, wait for get_revision_1() to give
everything that it would normally give, and then reverse it
before consuming.
If skip is given, skip that many before going further.
If max is given, stop when we gave out that many.
Now that we are about to return one positive commit, mark
the parents of that commit to be potential boundaries
before returning, iff we are doing the boundary processing.
Return the commit.
- After get_revision() finishes giving out all the positive
commits, if we are doing the boundary processing, we look at
the parents that we marked as potential boundaries earlier,
see if they are really boundaries, and give them out.
It loses more code than it adds, even when the new gc_boundary()
function, which is purely for early optimization, is counted.
Note that this patch is purely for eyeballing and discussion
only. It breaks git-bundle's verify logic because the logic
does not use BOUNDARY_SHOW flag for its internal computation
anymore. After we correct it not to attempt to affect the
boundary processing by setting the BOUNDARY_SHOW flag, we can
remove BOUNDARY_SHOW from revision.h and use that bit assignment
for the new CHILD_SHOWN flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
git-gui: Make 'make' quieter by default
git-gui: Remove unnecessary /dev/null redirection.
git-gui: Don't create empty (same tree as parent) commits.
git-gui: Add Reset to the Branch menu.
git-gui: Relocate the menu/transport menu code.
|
|
* 'master' of git://repo.or.cz/git-gui:
git-gui: Make 'make' quieter by default
git-gui: Remove unnecessary /dev/null redirection.
git-gui: Don't create empty (same tree as parent) commits.
git-gui: Add Reset to the Branch menu.
git-gui: Relocate the menu/transport menu code.
|
|
The handcrafted built-in rev-list lookalike forgot to mark the trees
and blobs contained in the boundary commits uninteresting, resulting
in unnecessary objects in the pack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
To fit nicely into the output of the git.git project's own quieter
Makefile, we want to make the git-gui Makefile nice and quiet too.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-commit: cd to top before showing the final stat
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
'maint'
* 'master-for-junio' of git://repo.or.cz/git/fastimport:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
* maint:
Fix diff-options references in git-diff and git-format-patch
Add definition of <commit-ish> to the main git man page.
Begin SubmittingPatches with a check list
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
|
|
Most of the git-diff-* documentation used [<common diff options>]
instead of [--diff-options], so make that change in git-diff and
git-format-patch.
In addition, git-format-patch didn't include the meanings of the diff
options.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* 'maint-for-junio' of git://repo.or.cz/git/fastimport:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
|
|
It seems that some people prefer a short list to a long text. But even for
the latter group, a quick reminder list is useful. So, add a check list to
Documentation/SubmittingPatches of what to do to get your patch accepted.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
[sp: Minor evil merge to deal with type_names array moving
to be private in 'master'.]
|
|
Johannes Sixt noticed during one of his own imports that fast-import
did not fail if a non-existant commit is referenced by SHA-1 value
as an argument to the 'merge' command. This allowed the user to
unknowingly create commits that would fail in fsck, as the commit
contents would not be completely reachable.
A side effect of this bug was that a frontend process could mark
any SHA-1 object (blob, tree, tag) as a parent of a merge commit.
This should also fail in fsck, as the commit is not a valid commit.
We now use the same rule as the 'from' command. If a commit is
referenced in the 'merge' command by hex formatted SHA-1 then the
SHA-1 must be a commit or a tag that can be peeled back to a commit,
the commit must already exist, and must be readable by the core Git
infrastructure code. This requirement means that the commit must
have existed prior to fast-import starting, or the commit must have
been flushed out by a prior 'checkpoint' command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Johannes Sixt noticed that a 'reset' command applied to a branch that
is already active in the branch LRU cache can cause fast-import to
relink the same branch into the LRU cache twice. This will cause
the LRU cache to contain a cycle, making unload_one_branch run in an
infinite loop as it tries to select the oldest branch for eviction.
I have trivially fixed the problem by adding an active bit to
each branch object; this bit indicates if the branch is already
in the LRU and allows us to avoid trying to add it a second time.
Converting the pack_id field into a bitfield makes this change take
up no additional memory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Add git-blame as a candidate to the byte-compilation.
batch-byte-compile is the prefered way to byte-compile files in
batch mode. Use it instead of the interactive function.
Signed-off-by: Xavier Maillard <zedek@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Update the main git.html page to point at 1.5.0.3 documentation.
Update draft 1.5.1 release notes with what we have so far.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* 'js/fetch-progress' (early part):
Fixup no-progress for fetch & clone
fetch & clone: do not output progress when not on a tty
Conflicts:
git-fetch.sh
|
|
* js/symlink:
Tell multi-parent diff about core.symlinks.
Handle core.symlinks=false case in merge-recursive.
Add core.symlinks to mark filesystems that do not support symbolic links.
|
|
* maint:
GIT 1.5.0.3
glossary: Add definitions for dangling and unreachable objects
user-manual: more detailed merge discussion
user-manual: how to replace commits older than most recent
user-manual: insert earlier of mention content-addressable architecture
user-manual: ensure generated manual references stylesheet
user-manual: reset to ORIG_HEAD not HEAD to undo merge
Documentation: mention module option to git-cvsimport
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Define "dangling" and "unreachable" objects. Modified from original
text proposed by Yasushi Shoji.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add more details on conflict, including brief discussion of file stages.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
"Modifying" an old commit by checking it out, --amend'ing it, then
rebasing on top of it, is a slightly cumbersome technique, but I've
found it useful frequently enough to make it seem worth documenting.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The content-addressable design is too important not to be worth at least
a brief mention a little earlier on.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The generated user manual is rather hard to read thanks to the lack of
the css that's supposed to be included from docbook-xsl.css.
I'm totally ignorant of the toolchain; grubbing through xmlto and
related scripts, the easiest way I could find to ensure that the
generated html links to the stylesheet is by calling xsltproc directly.
Maybe there's some better way.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As Linus pointed out recently on the mailing list,
git reset --hard HEAD^
doesn't undo a merge in the case where the merge did a fast-forward. So
the rcommendation here is a little dangerous.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The git-cvsimport argument that specifies a cvs module to import should
probably be included in the default example.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It was traversing the entire repository before.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When run from a subdirectory of a repository, the command forgot
to adjust paths given to it with prefix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* 'js/diff-ni' (early part):
diff: make more cases implicit --no-index
|
|
* maint:
Unset NO_C99_FORMAT on Cygwin.
Fix a "pointer type missmatch" warning.
Fix some "comparison is always true/false" warnings.
Fix an "implicit function definition" warning.
Fix a "label defined but unreferenced" warning.
Document the config variable format.suffix
git-merge: fail correctly when we cannot fast forward.
builtin-archive: use RUN_SETUP
Fix git-gc usage note
|
|
This should only be set based on the capability of your
compiler/library to support c99 format specifiers. In this
case the version of gcc/newlib and indirectly the version
of Cygwin. It should probably only be set in your config.mak
file.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When core.symlinks is false, and a merge of symbolic links had conflicts,
the merge result is left as a file in the working directory. A decision
must be made whether the file is treated as a regular file or as a
symbolic link. This patch treats the file as a symbolic link only if
all merge parents were also symbolic links.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If the file system does not support symbolic links (core.symlinks=false),
merge-recursive must write the merged symbolic link text into a regular
file.
While we are here, fix a tiny memory leak in the if-branch that writes
real symbolic links.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In particular, the second parameter in the call to iconv() will
cause this warning if your library declares iconv() with the
second (input buffer pointer) parameter of type const char **.
This is the old prototype, which is none-the-less used by the
current version of newlib on Cygwin. (It appears in old versions
of glibc too).
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
On Cygwin the wchar_t type is an unsigned short (16-bit) int.
This results in the above warnings from the return statement in
the wcwidth() function (in particular, the expressions involving
constants with values larger than 0xffff). Simply replace the
use of wchar_t with an unsigned int, typedef-ed as ucs_char_t.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The function at issue being initgroups() from the <grp.h> header
file. On Cygwin, setting _XOPEN_SOURCE suppresses the definition
of initgroups(), which causes the warning while compiling daemon.c.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When we cannot fast forward the working tree and the current
branch, git-merge did not exit with non-zero status.
Noticed by Larry Streepy, the section to be fixed identfied by
Johannes Schindelin.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It used to roll its own setup.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some file systems that can host git repositories and their working copies
do not support symbolic links. But then if the repository contains a symbolic
link, it is impossible to check out the working copy.
This patch enables partial support of symbolic links so that it is possible
to check out a working copy on such a file system. A new flag
core.symlinks (which is true by default) can be set to false to indicate
that the filesystem does not support symbolic links. In this case, symbolic
links that exist in the trees are checked out as small plain files, and
checking in modifications of these files preserve the symlink property in
the database (as long as an entry exists in the index).
Of course, this does not magically make symbolic links work on such defective
file systems; hence, this solution does not help if the working copy relies
on that an entry is a real symbolic link.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
Fix quoting in update hook template
|
|
Add the new --no-abbrev option to the man page for the git-branch command.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-branch has an --abbrev= command line option, but it does
no checking of the input. Take the argument parsing code from
setup_revisions in revisions.c, and also the code for parsing
the --no-abbrev option.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Shawn O. Pearce
Brian Gernhardt
Theodore Ts'o
Johannes Schindelin
Xavier Maillard
Santi Béjar
Yasushi SHOJI
J. Bruce Fields
Eric Wong
Ramsay Jones
Johannes Sixt
Matthias Kestenholz
Julian Phillips