| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Change the bitfield added in 58300f47432 (sparse-index: add
index.sparse config option, 2021-03-30) and 3964fc2aae7 (sparse-index:
add guard to ensure full index, 2021-03-30) to just use an "int"
boolean instead.
It might be smart to optimize the space here in the future, but by
consistently using an "int" we can take its address and pass it to
repo_cfg_bool(), and therefore don't need to handle "sparse_index" as
a special-case when reading the "index.sparse" setting.
There's no corresponding config for "command_requires_full_index", but
let's change it too for consistency and to prevent future bugs
creeping in due to one of these being "unsigned".
Using "int" consistently also prevents subtle bugs or undesired
control flow creeping in here. Before the preceding commit the
initialization of "command_requires_full_index" in
prepare_repo_settings() did nothing, i.e. this:
r->settings.command_requires_full_index = 1
Was redundant to the earlier memset() to -1. Likewise for
"sparse_index" added in 58300f47432 (sparse-index: add index.sparse
config option, 2021-03-30) the code and comment added there was
misleading, we weren't initializing it to off, but re-initializing it
from "1" to "0", and then finally checking the config, and perhaps
setting it to "1" again. I.e. we could have applied this patch before
the preceding commit:
+ assert(r->settings.command_requires_full_index == 1);
r->settings.command_requires_full_index = 1;
/*
* Initialize this as off.
*/
+ assert(r->settings.sparse_index == 1);
r->settings.sparse_index = 0;
if (!repo_config_get_bool(r, "index.sparse", &value) && value)
r->settings.sparse_index = 1;
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change tweak_untracked_cache() in "read-cache.c" to use a switch() to
have the compiler assert that we checked all possible values in the
"enum untracked_cache_setting" type, and likewise remove the "default"
case in fetch_negotiator_init() in favor of checking for
"FETCH_NEGOTIATION_UNSET" and "FETCH_NEGOTIATION_NONE".
As will be discussed in a subsequent we'll only ever have either of
these set to FETCH_NEGOTIATION_NONE, FETCH_NEGOTIATION_UNSET and
UNTRACKED_CACHE_UNSET within the prepare_repo_settings() function
itself. In preparation for fixing that code let's add a BUG() here to
mark this as unreachable code.
See ad0fb659993 (repo-settings: parse core.untrackedCache, 2019-08-13)
for when the "unset" and "keep" handling for core.untrackedCache was
consolidated, and aaf633c2ad1 (repo-settings: create
feature.experimental setting, 2019-08-13) for the addition of the
"default" pattern in "fetch-negotiator.c".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of the global ignore_untracked_cache_config variable added in
dae6c322fa1 (test-dump-untracked-cache: don't modify the untracked
cache, 2016-01-27) we can make use of the new facility to set config
via environment variables added in d8d77153eaf (config: allow
specifying config entries via envvar pairs, 2021-01-12).
It's arguably a bit hacky to use setenv() and getenv() to pass
messages between the same program, but since the test helpers are not
the main intended audience of repo-settings.c I think it's better than
hardcoding the test-only special-case in prepare_repo_settings().
This uses the xsetenv() wrapper added in the preceding commit, if we
don't set these in the environment we'll fail in
t7063-status-untracked-cache.sh, but let's fail earlier anyway if that
were to happen.
This breaks any parent process that's potentially using the
GIT_CONFIG_* and GIT_CONFIG_PARAMETERS mechanism to pass one-shot
config setting down to a git subprocess, but in this case we don't
care about the general case of such potential parents. This process
neither spawns other "git" processes, nor is it interested in other
configuration. We might want to pick up other test modes here, but
those will be passed via GIT_TEST_* environment variables.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add fatal wrappers for setenv() and unsetenv(). In d7ac12b25d3 (Add
set_git_dir() function, 2007-08-01) we started checking its return
value, and since 48988c4d0c3 (set_git_dir: die when setenv() fails,
2018-03-30) we've had set_git_dir_1() die if we couldn't set it.
Let's provide a wrapper for both, this will be useful in many other
places, a subsequent patch will make another use of xsetenv().
The checking of the return value here is over-eager according to
setenv(3) and POSIX. It's documented as returning just -1 or 0, so
perhaps we should be checking -1 explicitly.
Let's just instead die on any non-zero, if our C library is so broken
as to return something else than -1 on error (and perhaps not set
errno?) the worst we'll do is die with a nonsensical errno value, but
we'll want to die in either case.
Let's make these return "void" instead of "int". As far as I can tell
there's no other x*() wrappers that needed to make the decision of
deviating from the signature in the C library, but since their return
value is only used to indicate errors (so we'd die here), we can catch
unreachable code such as
if (xsetenv(...) < 0)
[...];
I think it would be OK skip the NULL check of the "name" here for the
calls to die_errno(). Almost all of our setenv() callers are taking a
constant string hardcoded in the source as the first argument, and for
the rest we can probably assume they've done the NULL check
themselves. Even if they didn't, modern C libraries are forgiving
about it (e.g. glibc formatting it as "(null)"), on those that aren't,
well, we were about to die anyway. But let's include the check anyway
for good measure.
1. https://pubs.opengroup.org/onlinepubs/009604499/functions/setenv.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakfix.
* jc/prefix-filename-allocates:
hash-object: prefix_filename() returns allocated memory these days
|
|
"git range-diff -I... <range> <range>" segfaulted, which has been
corrected.
* rs/range-diff-avoid-segfault-with-I:
range-diff: avoid segfault with -I
|
|
The code that optionally creates the *.rev reverse index file has
been optimized to avoid needless computation when it is not writing
the file out.
* ab/reverse-midx-optim:
pack-write: skip *.rev work when not writing *.rev
|
|
"make INSTALL_STRIP=-s install" allows the installation step to use
"install -s" to strip the binaries as they get installed.
* bs/install-strip:
make: add INSTALL_STRIP option variable
|
|
Teach "test_pause" and "debug" helpers to allow using the HOME and
TERM environment variables the user usually uses.
* pb/test-use-user-env:
test-lib-functions: keep user's debugger config files and TERM in 'debug'
test-lib-functions: optionally keep HOME, TERM and SHELL in 'test_pause'
test-lib-functions: use 'TEST_SHELL_PATH' in 'test_pause'
|
|
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
|
|
Docfix.
* bs/doc-bugreport-outdir:
Documentation: fix default directory of git bugreport -o
|
|
Build simplification.
* ab/no-more-check-bindir:
Makefile: remove the check_bindir script
|
|
Regression fix.
* ab/send-email-config-fix:
send-email: fix a "first config key wins" regression in v2.33.0
|
|
Recent "diff -m" changes broke "gitk", which has been corrected.
* so/diff-index-regression-fix:
diff-index: restore -c/--cc options handling
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic for auto-correction of misspelt subcommands learned to go
interactive when the help.autocorrect configuration variable is set
to 'prompt'.
* ab/help-autocorrect-prompt:
help.c: help.autocorrect=prompt waits for user action
|
|
CI update.
* cb/ci-build-pedantic:
ci: run a pedantic build as part of the GitHub workflow
|
|
Tie-break branches that point at the same object in the list of
branches on GitWeb to show the one pointed at by HEAD early.
* gh/gitweb-branch-sort:
gitweb: use HEAD as secondary sort key in git_get_heads_list()
|
|
Code cleanup.
* rs/archive-use-object-id:
archive: convert queue_directory to struct object_id
|
|
Code cleanup.
* rs/show-branch-simplify:
show-branch: simplify rev_is_head()
|
|
Doc update plus improved error reporting.
* jk/log-warn-on-bogus-encoding:
docs: use "character encoding" to refer to commit-object encoding
logmsg_reencode(): warn when iconv() fails
|
|
Build fix.
* cb/remote-ndebug-fix:
remote: avoid -Wunused-but-set-variable in gcc with -DNDEBUG
|
|
Code clean up to migrate callers from older advice_config[] based
API to newer advice_if_enabled() and advice_enabled() API.
* ab/retire-advice-config:
advice: move advice.graftFileDeprecated squashing to commit.[ch]
advice: remove use of global advice_add_embedded_repo
advice: remove read uses of most global `advice_` variables
advice: add enum variants for missing advice variables
|
|
After "git clone --recurse-submodules", all submodules are cloned
but they are not by default recursed into by other commands. With
submodule.stickyRecursiveClone configuration set, submodule.recurse
configuration is set to true in a repository created by "clone"
with "--recurse-submodules" option.
* mk/clone-recurse-submodules:
clone: set submodule.recurse=true if submodule.stickyRecursiveClone enabled
|
|
Leakfix.
* ab/mailmap-leakfix:
mailmap.c: fix a memory leak in free_mailap_{info,entry}()
|
|
A pathname in an advice message has been made cut-and-paste ready.
* ab/gc-log-rephrase:
gc: remove trailing dot from "gc.log" line
|
|
Update the userdiff pattern for PHP.
* uk/userdiff-php-enum:
userdiff: support enum keyword in PHP hunk header
|
|
The output from "git fast-export", when its anonymization feature
is in use, showed an annotated tag incorrectly.
* tk/fast-export-anonymized-tag-fix:
fast-export: fix anonymized tag using original length
|
|
Leakfix.
* ba/object-info:
protocol-caps.c: fix memory leak in send_info()
|
|
Fixes on usage message from "git commit-graph".
* ab/commit-graph-usage:
commit-graph: show "unexpected subcommand" error
commit-graph: show usage on "commit-graph [write|verify] garbage"
commit-graph: early exit to "usage" on !argc
multi-pack-index: refactor "goto usage" pattern
commit-graph: use parse_options_concat()
commit-graph: remove redundant handling of -h
commit-graph: define common usage with a macro
|
|
Even when running "git send-email" without its own threaded
discussion support, a threading related header in one message is
carried over to the subsequent message to result in an unwanted
threading, which has been corrected.
* mh/send-email-reset-in-reply-to:
send-email: avoid incorrect header propagation
|
|
Code simplification.
* rs/more-fspathcmp:
merge-recursive: use fspathcmp() in path_hashmap_cmp()
|
|
Buggy tests could damage repositories outside the throw-away test
area we created. We now by default export GIT_CEILING_DIRECTORIES
to limit the damage from such a stray test.
* sg/set-ceiling-during-tests:
test-lib: set GIT_CEILING_DIRECTORIES to protect the surrounding repository
|
|
The sparse-index support can corrupt the index structure by storing
a stale and/or uninitialized data, which has been corrected.
* jh/sparse-index-resize-fix:
sparse-index: copy dir_hash in ensure_full_index()
|
|
Typofix.
* es/walken-tutorial-fix:
doc: fix syntax error and the format of printf
|
|
Code simplification with reduced memory usage.
* tb/add-objects-in-unpacked-packs-simplify:
builtin/pack-objects.c: remove duplicate hash lookup
builtin/pack-objects.c: simplify add_objects_in_unpacked_packs()
object-store.h: teach for_each_packed_object to ignore kept packs
|
|
"git fetch --quiet" optimization to avoid useless computation of
info that will never be displayed.
* ps/fetch-omit-formatting-under-quiet:
fetch: skip formatting updated refs with `--quiet`
|
|
"git upload-pack" which runs on the other side of "git fetch"
forgot to take the ref namespaces into account when handling
want-ref requests.
* ka/want-ref-in-namespace:
docs: clarify the interaction of transfer.hideRefs and namespaces
upload-pack.c: treat want-ref relative to namespace
t5730: introduce fetch command helper
|
|
The advice message that "git cherry-pick" gives when it asks
conflicted replay of a commit to be resolved by the end user has
been updated.
* zh/cherry-pick-advice:
cherry-pick: use better advice message
|
|
"git rebase" by default skips changes that are equivalent to
commits that are already in the history the branch is rebased onto;
give messages when this happens to let the users be aware of
skipped commits, and also teach them how to tell "rebase" to keep
duplicated changes.
* js/advise-when-skipping-cherry-picked:
sequencer: advise if skipping cherry-picked commit
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parser for the "--nl" option of "git column" has been
corrected.
* sg/column-nl:
column: fix parsing of the '--nl' option
|
|
Build update for Apple clang.
* cb/makefile-apple-clang:
build: catch clang that identifies itself as "$VENDOR clang"
build: clang version may not be followed by extra words
build: update detect-compiler for newer Xcode version
|
|
Micro-optimization for the wire protocol driver.
* ps/ls-refs-strbuf-optim:
ls-refs: reuse buffer when sending refs
|
|
"git branch -D <branch>" used to refuse to remove a broken branch
ref that points at a missing commit, which has been corrected.
* rs/branch-allow-deleting-dangling:
branch: allow deleting dangling branches with --force
|
|
The delayed checkout code path in "git checkout" etc. were chatty
even when --quiet and/or --no-progress options were given.
* mt/quiet-with-delayed-checkout:
checkout: make delayed checkout respect --quiet and --no-progress
|
|
Error diagnostics improvement.
* rs/xopen-reports-open-failures:
use xopen() to handle fatal open(2) failures
xopen: explicitly report creation failures
|
|
"git diff --relative" segfaulted and/or produced incorrect result
when there are unmerged paths.
* dd/diff-files-unmerged-fix:
diff-lib: ignore paths that are outside $cwd if --relative asked
|
Ævar Arnfjörð Bjarmason
Junio C Hamano