| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It's possible to specify --simplify-by-decoration but not --decorate. In
this case we do respect the simplification, but we don't actually show
any decorations. However, it works by lazy-loading the decorations when
needed; this is discussed in more detail in 0cc7380d88 (log-tree: call
load_ref_decorations() in get_name_decoration(), 2019-09-08).
This works for basic cases, but will fail to respect any --decorate-refs
option (or its variants). Those are handled only when cmd_log_init()
loads the ref decorations up front, which is only when --decorate is
specified explicitly (or as of the previous commit, when the userformat
asks for %d or similar).
We can solve this by making sure to load the decorations if we're going
to simplify using them but they're not otherwise going to be displayed.
The new test shows a simple case that fails without this patch. Note
that we expect two commits in the output: the one we asked for by
--decorate-refs, and the initial commit. The latter is just a quirk of
how --simplify-by-decoration works. Arguably it may be a bug, but it's
unrelated to this patch (which is just about the loading of the
decorations; you get the same behavior before this patch with an
explicit --decorate).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to show ref decorations, we first have to load them. If you
run:
git log --decorate
then git-log will recognize the option and load them up front via
cmd_log_init(). Likewise if log.decorate is set.
If you don't say --decorate explicitly, but do mention "%d" or "%D" in
the output format, like so:
git log --format=%d
then this also works, because we lazy-load the ref decorations. This has
been true since 3b3d443feb (add '%d' pretty format specifier to show
decoration, 2008-09-04), though the lazy-load was later moved into
log-tree.c.
But there's one problem: that lazy-load just uses the defaults; it
doesn't take into account any --decorate-refs options (or its exclude
variant, or their config). So this does not work:
git log --decorate-refs=whatever --format=%d
It will decorate using all refs, not just the specified ones. This has
been true since --decorate-refs was added in 65516f586b (log: add option
to choose which refs to decorate, 2017-11-21). Adding further confusion
is that it _may_ work because of the auto-decoration feature. If that's
in use (and it often is, as it's the default), then if the output is
going to stdout, we do enable decorations early (and so load them up
front, respecting the extra options). But otherwise we do not. So:
git log --decorate-refs=whatever --format=%d >some-file
would typically behave differently than it does when the output goes to
the pager or terminal!
The solution is simple: we should recognize in cmd_log_init() that we're
going to show decorations, and make sure we load them there. We already
check userformat_find_requirements(), so we can couple this with our
existing code there.
There are two new tests. The first shows off the actual fix. The second
makes sure that our fix doesn't cause us to stomp on an existing
--decorate option (see the new comment in the code, as well).
Reported-by: Josh Rampersad <josh.rampersad@voiceflow.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The clean/smudge conversion code path has been prepared to better
work on platforms where ulong is narrower than size_t.
* mc/clean-smudge-with-llp64:
clean/smudge: allow clean filters to process extremely large files
odb: guard against data loss checking out a huge file
git-compat-util: introduce more size_t helpers
odb: teach read_blob_entry to use size_t
t1051: introduce a smudge filter test for extremely large files
test-lib: add prerequisite for 64-bit platforms
test-tool genzeros: generate large amounts of data more efficiently
test-genzeros: allow more than 2G zeros in Windows
|
|
Make a few helper functions unused and then lose them.
* ab/sh-retire-helper-functions:
git-sh-setup: remove "sane_grep", it's not needed anymore
git-sh-setup: remove unused sane_egrep() function
git-instaweb: unconditionally assume that gitweb is mod_perl capable
Makefile: remove $(NO_CURL) from $(SCRIPT_DEFINES)
Makefile: remove $(GIT_VERSION) from $(SCRIPT_DEFINES)
Makefile: move git-SCRIPT-DEFINES adjacent to $(SCRIPT_DEFINES)
|
|
Leakfix.
* tb/plug-pack-bitmap-leaks:
pack-bitmap.c: more aggressively free in free_bitmap_index()
pack-bitmap.c: don't leak type-level bitmaps
midx.c: write MIDX filenames to strbuf
builtin/multi-pack-index.c: don't leak concatenated options
builtin/repack.c: avoid leaking child arguments
builtin/pack-objects.c: don't leak memory via arguments
t/helper/test-read-midx.c: free MIDX within read_midx_file()
midx.c: don't leak MIDX from verify_midx_file
midx.c: clean up chunkfile after reading the MIDX
|
|
The command line complation for "git send-email" options have been
tweaked to make it easier to keep it in sync with the command itself.
* tp/send-email-completion:
send-email docs: add format-patch options
send-email: programmatically generate bash completions
|
|
The compatibility implementation for unsetenv(3) were written to
mimic ancient, non-POSIX, variant seen in an old glibc; it has been
changed to return an integer to match the more modern era.
* jc/unsetenv-returns-an-int:
unsetenv(3) returns int, not void
|
|
Things like "git -c branch.sort=bogus branch new HEAD", i.e. the
operation modes of the "git branch" command that do not need the
sort key information, no longer errors out by seeing a bogus sort
key.
* jc/fix-ref-sorting-parse:
for-each-ref: delay parsing of --sort=<atom> options
|
|
"git stash" learned the "--staged" option to stash away what has
been added to the index (and nothing else).
* so/stash-staged:
stash: get rid of unused argument in stash_staged()
stash: implement '--staged' option for 'push' and 'save'
|
|
Teach and encourage first-time contributors to this project to
state the base commit when they submit their topic.
* jc/tutorial-format-patch-base:
MyFirstContribution: teach to use "format-patch --base=auto"
|
|
The "remainder" of hn/refs-errno-cleanup topic.
* ab/refs-errno-cleanup: (21 commits)
refs API: post-migration API renaming [2/2]
refs API: post-migration API renaming [1/2]
refs API: don't expose "errno" in run_transaction_hook()
refs API: make expand_ref() & repo_dwim_log() not set errno
refs API: make resolve_ref_unsafe() not set errno
refs API: make refs_ref_exists() not set errno
refs API: make refs_resolve_refdup() not set errno
refs tests: ignore ignore errno in test-ref-store helper
refs API: ignore errno in worktree.c's find_shared_symref()
refs API: ignore errno in worktree.c's add_head_info()
refs API: make files_copy_or_rename_ref() et al not set errno
refs API: make loose_fill_ref_dir() not set errno
refs API: make resolve_gitlink_ref() not set errno
refs API: remove refs_read_ref_full() wrapper
refs/files: remove "name exist?" check in lock_ref_oid_basic()
reflog tests: add --updateref tests
refs API: make refs_rename_ref_available() static
refs API: make parse_loose_ref_contents() not set errno
refs API: make refs_read_raw_ref() not set errno
refs API: add a version of refs_resolve_ref_unsafe() with "errno"
...
|
|
Allow "git status --porcelain=v2" to show the number of stash
entries with --show-stash like the normal output does.
* ow/stash-count-in-status-porcelain-output:
status: print stash info with --porcelain=v2 --show-stash
status: count stash entries in separate function
|
|
Treat "_" as any other URL-valid characters in an URL when matching
the per-URL configuration variable names.
* jk/loosen-urlmatch:
urlmatch: add underscore to URL_HOST_CHARS
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regression fix for 2.34
* jc/save-restore-terminal-revert:
Revert "editor: save and reset terminal after calling EDITOR"
|
|
Regression fix for 2.34
* ds/add-rm-with-sparse-index:
dir: revert "dir: select directories correctly"
|
|
Doc fix.
* ab/update-submitting-patches:
SubmittingPatches: fix Asciidoc syntax in "GitHub CI" section
|
|
"git pull" with any strategy when the other side is behind us
should succeed as it is a no-op, but doesn't.
* ev/pull-already-up-to-date-is-noop:
pull: should be noop when already-up-to-date
|
|
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with versions of PCREv2 library older
than 10.34 in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regression fix for 2.34
* jc/save-restore-terminal-revert:
Revert "editor: save and reset terminal after calling EDITOR"
|
|
Regression fix for 2.34
* ds/add-rm-with-sparse-index:
dir: revert "dir: select directories correctly"
|
|
This reverts commit 3d411afabc9a96f41d47c07d6af6edda3d29ec92,
blindly opening /dev/tty and calling tcsetattr() seems to be causing
problems.
cf. https://bugs.eclipse.org/bugs/show_bug.cgi?id=577358
cf. https://lore.kernel.org/git/04ab7301-ea34-476c-eae4-4044fef74b91@gmail.com/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit f6526728f950cacfd5b5e42bcc65f2c47f3da654.
The change in f652672 (dir: select directories correctly, 2021-09-24)
caused a regression in directory-based matches with non-cone-mode
patterns, especially for .gitignore patterns. A test is included to
prevent this regression in the future.
The commit ed495847 (dir: fix pattern matching on dirs, 2021-09-24) was
reverted in 5ceb663 (dir: fix directory-matching bug, 2021-11-02) for
similar reasons. Neither commit changed tests, and tests added later in
the series continue to pass when these commits are reverted.
Reported-by: Danial Alihosseini <danial.alihosseini@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc fix.
* ab/update-submitting-patches:
SubmittingPatches: fix Asciidoc syntax in "GitHub CI" section
|
|
"git pull" with any strategy when the other side is behind us
should succeed as it is a no-op, but doesn't.
* ev/pull-already-up-to-date-is-noop:
pull: should be noop when already-up-to-date
|
|
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with certain versions of PCREv2
library in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
|
|
This reverts commit ae39ba431ab861548eb60b4bd2e1d8b8813db76f, as it
breaks "grep" when looking for a string in non UTF-8 haystack, when
linked with certain versions of PCREv2 library.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The already-up-to-date pull bug was fixed for --ff-only but it did not
include the case where --ff or --ff-only are not specified. This updates
the --ff-only fix to include the case where --ff or --ff-only are not
specified in command line flags or config.
Signed-off-by: Erwin Villejo <erwin.villejo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
l10n-2.34.0-rnd3.1
* tag 'l10n-2.34.0-rnd3.1' of git://github.com/git-l10n/git-po: (38 commits)
l10n: pl: 2.34.0 round 3
l10n: it: fix typos found by git-po-helper
l10n: ko: fix typos found by git-po-helper
l10n: Update Catalan translation
l10n: po-id for 2.34 (round 3)
l10n: bg.po: Updated Bulgarian translation (5211t)
l10n: de.po: Update German translation for Git v2.34.0
l10n: sv.po: Update Swedish translation (5211t0f0)
l10n: vi(5211t): Translation for v2.34.0 rd3
l10n: zh_TW.po: v2.34.0 round 3 (0 untranslated)
l10n: fr: v2.34.0 rnd 3
l10n: tr: v2.34.0 round 3
l10n: zh_CN: v2.34.0 round 3
l10n: git.pot: v2.34.0 round 3 (1 new)
l10n: pl: 2.34.0 round 2
l10n: vi(5210t): Translation for v2.34.0 rd2
l10n: es: 2.34.0 round 2
l10n: Update Catalan translation
l10n: bg.po: Updated Bulgarian translation (5210t)
l10n: fr: v2.34.0 round 2
...
|
|
Signed-off-by: Arusekk <arek_koz@o2.pl>
|
|
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
A superfluous ']' was added to the title of the GitHub CI section in
f003a91f5c (SubmittingPatches: replace discussion of Travis with GitHub
Actions, 2021-07-22). Remove it.
While at it, format the URL for a GitHub user's workflow runs of Git
between backticks, since if not Asciidoc formats only the first part,
"https://github.com/<Your", as a link, which is not very useful.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When checking typos in file "po/ko.po", "git-po-helper" reports lots of
false positives because there are no spaces between ASCII and Korean
characters. After applied commit adee197 "(dict: add smudge table for
Korean language, 2021-11-11)" of "git-l10n/git-po-helper" to suppress
these false positives, some easy-to-fix typos are found and fixed.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
* 'po-id' of github.com:bagasme/git-po:
l10n: po-id for 2.34 (round 3)
|
|
- Translate following new components:
* merge.c
* rebase-interactive.c
* rebase.c
* midx.c
- Clean up obsolete translations
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
|
|
* 'master' of github.com:ruester/git-po-de:
l10n: de.po: Update German translation for Git v2.34.0
|
|
When we added a new event type to trace2 event stream, we forgot to
raise the format version number, which has been corrected.
* js/trace2-raise-format-version:
trace2: increment event format version
|
|
Regression fix.
* ab/fsck-unexpected-type:
object-file: free(*contents) only in read_loose_object() caller
object-file: fix SEGV on free() regression in v2.34.0-rc2
|
|
Regression fix.
* ps/connectivity-optim:
Revert "connected: do not sort input revisions"
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
Reviewed-by: Phillip Szelat <phillip.szelat@gmail.com>
|
|
In 64bc752 (trace2: add trace2_child_ready() to report on background
children, 2021-09-20), we added a new "child_ready" event. In
Documentation/technical/api-trace2.txt, we promise that adding a new
event type will result in incrementing the trace2 event format version
number, but this was not done. Correct this in code & docs.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
In the preceding commit a free() of uninitialized memory regression in
96e41f58fe1 (fsck: report invalid object type-path combinations,
2021-10-01) was fixed, but we'd still have an issue with leaking
memory from fsck_loose(). Let's fix that issue too.
That issue was introduced in my 31deb28f5e0 (fsck: don't hard die on
invalid object types, 2021-10-01). It can be reproduced under
SANITIZE=leak with the test I added in 093fffdfbec (fsck tests: add
test for fsck-ing an unknown type, 2021-10-01):
./t1450-fsck.sh --run=84 -vixd
In some sense it's not a problem, we lost the same amount of memory in
terms of things malloc'd and not free'd. It just moved from the "still
reachable" to "definitely lost" column in valgrind(1) nomenclature[1],
since we'd have die()'d before.
But now that we don't hard die() anymore in the library let's properly
free() it. Doing so makes this code much easier to follow, since we'll
now have one function owning the freeing of the "contents" variable,
not two.
For context on that memory management pattern the read_loose_object()
function was added in f6371f92104 (sha1_file: add read_loose_object()
function, 2017-01-13) and subsequently used in c68b489e564 (fsck:
parse loose object paths directly, 2017-01-13). The pattern of it
being the task of both sides to free() the memory has been there in
this form since its inception.
1. https://valgrind.org/docs/manual/mc-manual.html#mc-manual.leaks
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Derrick Stolee
Erwin Villejo
Arusekk
Jiang Xin
Philippe Blain
Jordi Mas
Bagas Sanjaya
Alexander Shopov
Matthias Rüster
Josh Steadmon
Peter Krefting
Ævar Arnfjörð Bjarmason