| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Each test in this file is skipped if the TABS_IN_FILENAMES test
prerequisite is set. Use the 'skip_all' facility at the head of
the file to skip all of the tests instead.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At present, running the t3300-*.sh test on cygwin looks like:
$ cd t
$ ./t3300-funny-names.sh
ok 1 - setup
# passed all 1 test(s)
1..1 # SKIP Your filesystem does not allow tabs in filenames
$
Unfortunately, this is not valid TAP output, which prove notes
as follows:
$ prove --exec sh t3300-funny-names.sh
t3300-funny-names.sh .. All 1 subtests passed
Test Summary Report
-------------------
t3300-funny-names.sh (Wstat: 0 Tests: 1 Failed: 0)
Parse errors: No plan found in TAP output
Files=1, Tests=1, 2 wallclock secs ( 0.05 usr 0.00 sys + \
0.90 cusr 0.49 csys = 1.43 CPU)
Result: FAIL
$
This is due to the 'trailing_plan' having a 'skip_directive'
attached to it. This is not allowed by the TAP grammar, which
only allows a 'leading_plan' to be followed by an optional
'skip_directive'. (see perldoc TAP::Parser::Grammar).
A trailing_plan is one that appears in the TAP output after one or
more test status lines (that start 'not '? 'ok ' ...), whereas a
leading_plan must appear before all test status lines (if any).
In practice, this means that the test script cannot contain a use
of the 'skip all' facility:
skip_all='Some reason to skip *all* tests in this file'
test_done
after having already executed one or more tests with (for example)
'test_expect_success'. Unfortunately, this is exactly what this
test script is doing. The first 'setup' test is actually used to
determine if the test prerequisite is satisfied by the filesystem
(ie does it allow tabs in filenames?).
In order to fix the parse errors, place the code to determine the
test prerequisite at the top level of the script, prior to the
first test, rather than as a parameter to test_expect_success.
This allows us to correctly use 'skip_all', thus:
$ ./t3300-funny-names.sh
# passed all 0 test(s)
1..0 # SKIP Your filesystem does not allow tabs in filenames
$
$ prove --exec sh t3300-funny-names.sh
t3300-funny-names.sh .. skipped: Your filesystem does not \
allow tabs in filenames
Files=1, Tests=0, 2 wallclock secs ( 0.02 usr 0.03 sys + \
0.84 cusr 0.41 csys = 1.29 CPU)
Result: NOTESTS
$
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.7.11:
Prepare for 1.7.11.6
Make the ciabot scripts completely self-configuring in the normal case.
Improved documentation for the ciabot scripts.
man: git pull -r is a short for --rebase
gitcli: describe abbreviation of long options
rev-list docs: clarify --topo-order description
Documentation/CodingGuidelines: spell out more shell guidelines
Documentation: do not mention .git/refs/* directories
tests: Introduce test_seq
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A minor documentation update.
* mv/pull-r-for-rebase:
man: git pull -r is a short for --rebase
|
|
We did not document that many commands take unique prefix
abbreviations of long options (e.g. "--option" may be the only flag
that the command accepts that begin with "--opt", in which case you
can give "--opt") anywhere easy to find for new people.
* jc/maint-abbrev-option-cli:
gitcli: describe abbreviation of long options
|
|
It was unclear what "--topo-order" was really about in the
documentation. It is not just about "children before parent", but
also about "don't mix lineages".
* jc/maint-rev-list-topo-doc:
rev-list docs: clarify --topo-order description
|
|
In earlier days, "imitate the style in the neibouring code" was
sufficient to keep the coherent style, but over time some parts of
the codebase have drifted enough to make it ineffective.
* hv/coding-guidelines:
Documentation/CodingGuidelines: spell out more shell guidelines
|
|
Our documentation used to assume having files in .git/refs/*
directories was the only to have branches and tags, but that is not
true for quite some time.
* jc/tag-doc:
Documentation: do not mention .git/refs/* directories
|
|
Add a compatibility/utility function to the test framework.
* mk/test-seq:
tests: Introduce test_seq
|
|
* lp/no-cmd-http-fetch:
builtin.h: remove unused cmd_<foo> declarations
|
|
* bw/maint-1.7.9-solaris-getpass:
Enable HAVE_DEV_TTY for Solaris
terminal: seek when switching between reading and writing
|
|
* jk/maint-commit-check-committer-early:
commit: check committer identity more strictly
|
|
Signed-off-by: Eric S. Raymond <esr@thyrsus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Eric S. Raymond <esr@thyrsus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.7.11:
contrib/ciabot: Get ciabot configuration from git variables
|
|
These changes remove all need to modify the ciabot scripts for installation.
Instead, per-project configuration can be dome via variables in a [ciabot]
section of the config file.
Also, correct for the new server address.
Signed-off-by: Eric S. Raymond <esr@thyrsus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'jc/doc-git-updates' (early part):
Documentation: update URL for formatted pages
|
|
The one at kernel.org has not been updated for quite a while and
can no longer be called "the latest".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Letting the "--rebase" option squat on the short-and-sweet single
letter option "-r" was an unintended accident and was not even
documented, but the short option seems to be already used in the
wild. Let's document it so that other options that begin with "r"
would not be tempted to steal it.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://github.com/git-l10n/git-po:
l10n: Fixes to Swedish translation
|
|
Tersify texts overflowing an 80-character terminal.
Fix spelling mistakes.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rj/maint-grep-remove-redundant-test:
t7810-*.sh: Remove redundant test
|
|
* hv/link-alt-odb-entry:
link_alt_odb_entry: fix read over array bounds reported by valgrind
|
|
It was unclear what "--topo-order" was really about in the
documentation. It is not just about "children before parent", but
also about "don't mix lineages".
Reword the description for both "--date-order" and "--topo-order",
and add an illustration to it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In earlier days, "imitate the style in the neibouring code" was
sufficient to keep the coherent style, but over time some parts of
the codebase have drifted enough to make it ineffective.
Spell some of the guidelines out.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since v1.7.0-rc2~11 (git-svn: persistent memoization, 2010-01-30),
git-svn has maintained some private per-repository caches in
.git/svn/.caches to avoid refetching and recalculating some
mergeinfo-related information with every 'git svn fetch'.
This memoization can cause problems, e.g consider the following case:
SVN repo:
... - a - b - c - m <- trunk
\ /
d - e <- branch1
The Git import of the above repo is at commit 'a' and doesn't know about
the branch1. In case of an 'git svn rebase', only the trunk of the
SVN repo is imported. During the creation of the git commit 'm', git svn
uses the svn:mergeinfo property and tries to find the corresponding git
commit 'e' to create 'm' with 'c' and 'e' as parents. But git svn rebase
only imports the current branch so commit 'e' is not imported.
Therefore git svn fails to create commit 'm' as a merge commit, because one
of its parents is not known to git. The imported history looks like this:
... - a - b - c - m <- trunk
A later 'git svn fetch' to import all branches can't rewrite the commit 'm'
to add 'e' as a parent and to make it a real git merge commit, because it
was already imported.
That's why the imported history misses the merge and looks like this:
... - a - b - c - m <- trunk
\
d - e <- branch1
Right now the only known workaround for importing 'm' as a merge is to
force reimporting 'm' again from SVN, e.g. via
$ git svn reset --revision $(git find-rev $c)
$ git svn fetch
Sadly, this is where the behavior has regressed: git svn reset doesn't
invalidate the old mergeinfo cache, which is no longer valid for the
reimport, which leads to 'm' beeing imprted with only 'c' as parent.
As solution to this problem, this commit invalidates the mergeinfo cache
to force correct recalculation of the parents.
During development of this patch, several ways for invalidating the cache
where considered. One of them is to use Memoize::flush_cache, which will
call the CLEAR method on the underlying Memoize persistency implementation.
Sadly, neither Memoize::Storable nor the newer Memoize::YAML module
introduced in 68f532f4ba888 could optionally be used implement the
CLEAR method, so this is not an option.
Reseting the internal hash used to store the memoized values has the same
problem, because it calls the non-existing CLEAR method of the
underlying persistency layer, too.
Considering this and taking into account the different implementations
of the memoization modules, where Memoize::Storable is not in our control,
implementing the missing CLEAR method is not an option, at least not if
Memoize::Storable is still used.
Therefore the easiest solution to clear the cache is to delete the files
on disk in 'git svn reset'. Normally, deleting the files behind the back
of the memoization module would be problematic, because the in-memory
representation would still exist and contain wrong data. Fortunately, the
memoization is active in memory only for a small portion of the code.
Invalidating the cache by deleting the files on disk if it isn't active
should be safe.
Signed-off-by: Peter Baumann <waste.manager@gmx.de>
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
dcommit didn't handle errors returned by SVN and coped very
poorly with concurrent commits that appear in SVN repository
while dcommit was running. In both cases it left git repository
in inconsistent state: index (which was reset with `git reset
--mixed' after a successful commit to SVN) no longer matched the
checkouted tree, when the following commit failed or needed to be
rebased. See http://bugs.debian.org/676904 for examples.
This patch fixes the issues by:
- introducing error handler for dcommit. The handler will try
to rebase or reset working tree before returning error to the
end user. dcommit_rebase function was extracted out of cmd_dcommit
to ensure consistency between cmd_dcommit and the error handler.
- calling `git reset --mixed' only once after all patches are
successfully committed to SVN. This ensures index is not touched
for most of the time of dcommit run.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
L10n updates for 1.7.12-rc2
* 'master' of git://github.com/git-l10n/git-po:
l10n: Update Swedish translation (1168t0f0u)
l10n: de.po: translate 77 new messages
l10n: vi.po: update one message
l10n: zh_CN.po: update one translation
l10n: Update one message in git.pot
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
The recent update to terminal I/O interface to get passwords &c
interactively didn't quite work on Solaris.
* bw/maint-1.7.9-solaris-getpass:
Enable HAVE_DEV_TTY for Solaris
terminal: seek when switching between reading and writing
|
|
Commit e30b2feb1b (Jun 24 2012, add 'git credential' plumbing command)
forgot to add git-credential to command-list.txt, hence the command was
not appearing in the documentation, making it hard for users to discover
it.
While we're there, capitalize the description line for git-crendential
for consistency with other commands.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://github.com/ralfth/git-po-de:
l10n: de.po: translate 77 new messages
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Translate 77 new messages came from git.pot update
in 3b6137f (l10n: Update git.pot (76 new, 4 removed
messages)) and bb2ba06 (l10n: Update one message in
git.pot).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
Now that git_terminal_prompt can cleanly interact with /dev/tty on
Solaris, enable HAVE_DEV_TTY so that this code path is used for
credential reading instead of relying on the crippled getpass().
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a stdio stream is opened in update mode (e.g., "w+"),
the C standard forbids switching between reading or writing
without an intervening positioning function. Many
implementations are lenient about this, but Solaris libc
will flush the recently-read contents to the output buffer.
In this instance, that meant writing the non-echoed password
that the user just typed to the terminal.
Fix it by inserting a no-op fseek between the read and
write.
The opposite direction (writing followed by reading) is also
disallowed, but our intervening fflush is an acceptable
positioning function for that alternative.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* Translate message that updated from commit bb2ba06
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Hopefully that will be the final 1.7.11.x maintenance release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/block-sha1:
Makefile: BLK_SHA1 does not require fast htonl() and unaligned loads
block-sha1: put expanded macro parameters in parentheses
block-sha1: avoid pointer conversion that violates alignment constraints
|
|
* jn/make-assembly-in-right-directory:
Makefile: fix location of listing produced by "make subdir/foo.s"
|
|
* ms/daemon-doc-typo:
Documentation/git-daemon: add missing word
|
|
* lm/git-blame-el:
git-blame.el: Do not use bare 0 to mean (point-min)
git-blame.el: Use with-current-buffer where appropriate
git-blame.el: Do not use goto-line in lisp code
|
Ramsay Jones
Junio C Hamano
Eric S. Raymond
Miklos Vajna
Peter Krefting
Heiko Voigt
Peter Baumann
Robert Luberda
Matthieu Moy
Jiang Xin
Ralf Thielow
Ben Walton
Jeff King
Tran Ngoc Quan