| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This function was used for comparing local and remote ref
names during fetch (which makes it a candidate for "most
confusingly named function of the year").
It no longer has any callers, so let's get rid of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are determining the list of refs to fetch via
fetch-pack, we have two sets of refs to compare: those on
the remote side, and a "match" list of things we want to
fetch. We iterate through the remote refs alphabetically,
seeing if each one is wanted by the "match" list.
Since def88e9 (Commit first cut at "git-fetch-pack",
2005-07-04), we have used the "path_match" function to do a
suffix match, where a remote ref is considered wanted if
any of the "match" elements is a suffix of the remote
refname.
This enables callers of fetch-pack to specify unqualified
refs and have them matched up with remote refs (e.g., ask
for "A" and get remote's "refs/heads/A"). However, if you
provide a fully qualified ref, then there are corner cases
where we provide the wrong answer. For example, given a
remote with two refs:
refs/foo/refs/heads/master
refs/heads/master
asking for "refs/heads/master" will first match
"refs/foo/refs/heads/master" by the suffix rule, and we will
erroneously fetch it instead of refs/heads/master.
As it turns out, all callers of fetch_pack do provide
fully-qualified refs for the match list. There are two ways
fetch_pack can get match lists:
1. Through the transport code (i.e., via git-fetch)
2. On the command-line of git-fetch-pack
In the first case, we will always be providing the names of
fully-qualified refs from "struct ref" objects. We will have
pre-matched those ref objects already (since we have to
handle more advanced matching, like wildcard refspecs), and
are just providing a list of the refs whose objects we need.
In the second case, users could in theory be providing
non-qualified refs on the command-line. However, the
fetch-pack documentation claims that refs should be fully
qualified (and has always done so since it was written in
2005).
Let's change this path_match call to simply check for string
equality, matching what the callers of fetch_pack are
expecting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fetch-pack documentation is very clear that refs given
on the command line are to be full refs:
<refs>...::
The remote heads to update from. This is relative to
$GIT_DIR (e.g. "HEAD", "refs/heads/master"). When
unspecified, update from all heads the remote side has.
and this has been the case since fetch-pack was originally documented in
8b3d9dc ([PATCH] Documentation: clone/fetch/upload., 2005-07-14).
Let's follow our own documentation to set a good example,
and to avoid breaking when this restriction is enforced in
the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The get_remote_heads function reads the list of remote refs
during git protocol session. It dates all the way back to
def88e9 (Commit first cut at "git-fetch-pack", 2005-07-04).
At that time, the idea was to come up with a list of refs we
were interested in, and then filter the list as we got it
from the remote side.
Later, 1baaae5 (Make maximal use of the remote refs,
2005-10-28) stopped filtering at the get_remote_heads layer,
letting us use the non-matching refs to find common history.
As a result, all callers now simply pass an empty match
list (and any future callers will want to do the same). So
let's drop these now-useless parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.7.7:
am: don't persist keepcr flag
mingw: give waitpid the correct signature
git symbolic-ref: documentation fix
|
|
The keepcr flag is only used in the split_patches function, which is
only called before a patch application has to stopped for user input,
not after resuming. It is therefore unnecessary to persist the
flag. This seems to have been the case since it was introduced in
ad2c928 (git-am: Add command line parameter `--keep-cr` passing it to
git-mailsplit, 2010-02-27).
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
POSIX says that last parameter to waitpid should be 'int',
so let's make it so.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old "git symbolic-ref" manpage seemed to imply in one place that
symlinks are still the default way to represent symbolic references
and in another that symlinks are deprecated. Fix the text and shorten
the justification for the change of implementation.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.7.7:
stripspace: fix outdated comment
Add MYMETA.yml to perl/.gitignore
|
|
* maint-1.7.6:
stripspace: fix outdated comment
Add MYMETA.yml to perl/.gitignore
|
|
The comment on top of stripspace() claims that the buffer
will no longer be NUL-terminated. However, this has not been
the case at least since the move to using strbuf in 2007.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This file is auto-generated by newer versions of ExtUtils::MakeMaker
(presumably starting with the version shipping with Perl 5.14). It just
contains extra information about the environment and arguments to the
Makefile-building process, and should be ignored.
Signed-off-by: Sebastian Morr <sebastian@morr.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/merge-edit-option:
Documentation: fix formatting error in merge-options.txt
|
|
The first paragraph inside of a list item does not need a preceding line
consisting of a single '+', and in fact this causes the text to be
misrendered. Fix it.
Signed-off-by: Jack Nagel <jacknagel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The second mode of 'git reset' is defined by the --patch
option, while the third mode is defined by the <mode> option.
Hence, these options are mandatory in the description of the
individual modes.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option --force should not put us in 'create branch' mode. The
fact that this option is only valid in 'create branch' mode is
already caught by the the next 'if' in which we assure that we
are in the correct mode.
Without this patch, "git branch -f" without any other argument ends
up calling create_branch without any branch name.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git cherry-pick --abort" command currently renames the
.git/sequencer directory to .git/sequencer-old instead of removing it
on success due to an accident. cherry-pick --abort is designed to
work in three steps:
1) find which commit to roll back to
2) call "git reset --merge <commit>" to move to that commit
3) remove the .git/sequencer directory
But the careless author forgot step 3 entirely. The only reason the
command worked anyway is that "git reset --merge <commit>" renames the
.git/sequencer directory as a secondary effect --- after moving to
<commit>, or so the logic goes, it is unlikely but possible that the
caller of git reset wants to continue the series of cherry-picks that
was in progress, so git renames the sequencer state to
.git/sequencer-old to be helpful while allowing the cherry-pick to be
resumed if the caller did not want to end the sequence after all.
By running "git cherry-pick --abort", the operator has clearly
indicated that she is not planning to continue cherry-picking. Remove
the (renamed) .git/sequencer directory as intended all along.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, it is not possible to rename or remove a directory that has
open files. 'revert --abort' renamed .git/sequencer when it still had
.git/sequencer/head open. Close the file as early as possible to allow
the rename operation on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes the following warning.
CC builtin/revert.o
builtin/revert.c: In function ‘write_cherry_pick_head’:
builtin/revert.c:311: warning: format not a string literal and no format arguments
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/revert-quit:
revert: remove --reset compatibility option
revert: introduce --abort to cancel a failed cherry-pick
revert: write REVERT_HEAD pseudoref during conflicted revert
revert: improve error message for cherry-pick during cherry-pick
revert: rearrange pick_revisions() for clarity
revert: rename --reset option to --quit
|
|
Remove the "git cherry-pick --reset" option, which has a different
preferred spelling nowadays ("--quit"). Luckily the old --reset name
was not around long enough for anyone to get used to it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After running some ill-advised command like "git cherry-pick
HEAD..linux-next", the bewildered novice may want to return to more
familiar territory. Introduce a "git cherry-pick --abort" command
that rolls back the entire cherry-pick sequence and places the
repository back on solid ground.
Just like "git merge --abort", this internally uses "git reset
--merge", so local changes not involved in the conflict resolution are
preserved.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When conflicts are encountered while reverting a commit, it can be
handy to have the name of that commit easily available. For example,
to produce a copy of the patch to refer to while resolving conflicts:
$ git revert 2eceb2a8
error: could not revert 2eceb2a8... awesome, buggy feature
$ git show -R REVERT_HEAD >the-patch
$ edit $(git diff --name-only)
Set a REVERT_HEAD pseudoref when "git revert" does not make a commit,
for cases like this. This also makes it possible for scripts to
distinguish between a revert that encountered conflicts and other
sources of an unmerged index.
After successfully committing, resetting with "git reset", or moving
to another commit with "git checkout" or "git reset", the pseudoref is
no longer useful, so remove it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the spirit of v1.6.3.3~3^2 (refuse to merge during a merge,
2009-07-01), "git cherry-pick" refuses to start a new cherry-pick when
in the middle of an existing conflicted cherry-pick in the following
sequence:
1. git cherry-pick HEAD..origin
2. resolve conflicts
3. git cherry-pick HEAD..origin (instead of "git cherry-pick
--continue", by mistake)
Good. However, the error message on attempting step 3 is more
convoluted than necessary:
$ git cherry-pick HEAD..origin
error: .git/sequencer already exists.
error: A cherry-pick or revert is in progress.
hint: Use --continue to continue the operation
hint: or --quit to forget about it
fatal: cherry-pick failed
Clarify by removing the redundant first "error:" message, simplifying
the advice, and using lower-case and no full stops to be consistent
with other commands that prefix their messages with "error:", so it
becomes
error: a cherry-pick or revert is already in progress
hint: try "git cherry-pick (--continue | --quit)"
fatal: cherry-pick failed
The "fatal: cherry-pick failed" line seems unnecessary, too, but
that can be fixed some other day.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Deal completely with "cherry-pick --quit" and --continue at the
beginning of pick_revisions(), leaving the rest of the function for
the more interesting "git cherry-pick <commits>" case.
No functional change intended. The impact is just to unindent the
code a little.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option to "git cherry-pick" and "git revert" to discard the
sequencer state introduced by v1.7.8-rc0~141^2~6 (revert: Introduce
--reset to remove sequencer state, 2011-08-04) has a confusing name.
Change it now, while we still have the time.
The new name for "cherry-pick, please get out of my way, since I've
long forgotten about the sequence of commits I was cherry-picking when
you wrote that old .git/sequencer directory" is --quit. Mnemonic:
this is analagous to quiting a program the user is no longer using ---
we just want to get out of the multiple-command cherry-pick procedure
and not to reset HEAD or rewind any other old state.
The "--reset" option is kept as a synonym to minimize the impact. We
might consider dropping it for simplicity in a separate patch, though.
Adjust documentation and tests to use the newly preferred name (--quit)
instead of --reset. While at it, let's clarify the short descriptions
of these operations in "-h" output.
Before:
--reset forget the current operation
--continue continue the current operation
After:
--quit end revert or cherry-pick sequence
--continue resume revert or cherry-pick sequence
Noticed-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
documentation fix: git difftool uses diff tools, not merge tools.
|
|
* rr/misc-fixes:
convert.c: Fix return type of git_path_check_eol()
|
|
The git_path_check_eol() function converts a string value to the
corresponding 'enum eol' value. However, the function is currently
declared to return an 'enum crlf_action', which causes sparse to
complain thus:
SP convert.c
convert.c:736:50: warning: mixing different enum types
convert.c:736:50: int enum crlf_action versus
convert.c:736:50: int enum eol
In order to suppress the warning, we simply correct the return type
in the function declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let the documentation for -t list valid *diff* tools,
not valid *merge* tools.
Signed-off-by: Thomas Hochstein <thh@inter.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On cygwin, test number 21 of t3200-branch.sh (git branch -m q q2
without config should succeed) fails. The failure involves the
functions from path.c which parcel out internal static buffers
from the git_path() and mkpath() functions.
In particular, the rename_ref() function calls safe_create_leading\
_directories() with a filename returned by git_path("logs/%s", ref).
safe_create_leading_directories(), in turn, calls stat() on each
element of the path it is given. On cygwin, this leads to a call
to git_config() for each component of the path, since this test
explicitly removes the config file. git_config() calls mkpath(), so
on the fourth component of the path, the original buffer passed
into the function is overwritten with the config filename.
Note that this bug is specific to cygwin and it's schizophrenic
stat() functions (see commits adbc0b6, 7faee6b and 7974843). The
lack of a config file and a path with at least four elements is
also important to trigger the bug.
In order to fix the problem, we replace the call to mkpath() with
a call to mksnpath() and provide our own buffer.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In particular, the url passed to git-clone has an extra '/' given
after the 'file://' schema prefix, thus:
git clone --reference=original "file:///$(pwd)/original one
Once the prefix is removed, the remainder of the url looks something
like "//home/ramsay/git/t/...", which is then interpreted as an
network path. This then results in a "Permission denied" error, like
so:
ramsay $ ls //home
ls: cannot access //home: No such host or network path
ramsay $ ls //home/ramsay
ls: cannot access //home/ramsay: Permission denied
ramsay $
In order to fix the problem, we simply remove the extraneous '/'
character from the url.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rr/misc-fixes:
git-compat-util: don't assume value for undefined variable
sha1_file: don't mix enum with int
convert: don't mix enum with int
http: remove unused function hex()
|
|
Now that the COMPUTE_HEADER_DEPENDENCIES feature is turned on
automatically for compilers that support it (see v1.7.8-rc0~142^2~1,
2011-08-18), there is no easy way to force it off. For example,
setting COMPUTE_HEADER_DEPENDENCIES to the empty string in config.mak
just tells the makefile to treat it as undefined and run a test
command to see if the -MMD option is supported.
So allow setting COMPUTE_HEADER_DEPENDENCIES=no to explicitly force
the feature off. The new semantics:
- "yes" means to explicitly enable the feature
- "no" means to disable it
- "auto" means to autodetect
The default is still "auto". Any value other than these three will
cause the build to error out with a descriptive message so typos and
stale settings in config.mak don't result in mysterious behavior.
Makefile:1278: *** please set COMPUTE_HEADER_DEPENDENCIES to
yes, no, or auto (not "1"). Stop.
So now when someone using a compiler without -MMD support reports
trouble building git, you can reproduce it by running "make
COMPUTE_HEADER_DEPENDENCIES=no".
Suggested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-name-rev-all:
name-rev --all: do not even attempt to describe non-commit object
|
|
* ml/mailmap:
mailmap: xcalloc mailmap_info
Conflicts:
mailmap.c
|
|
* jn/maint-notes-avoid-va-args:
notes merge: eliminate OUTPUT macro
Conflicts:
notes-merge.c
|
|
When the streaming filter API was introduced in v1.7.7-rc0~60^2~7
(2011-05-20), we forgot to add its header to LIB_H. Most translation
units depend on streaming.h via cache.h.
v1.7.5-rc0~48 (Fix sparse warnings, 2011-03-22) introduced undeclared
dependencies by url.o on url.h and thread-utils.o on thread-utils.h.
Noticed by make CHECK_HEADER_DEPENDENCIES=1.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The macro is variadic, which breaks support for pre-C99 compilers,
and it hides an "if", which can make code hard to understand on
first reading if some arguments have side-effects.
The OUTPUT macro seems to have been inspired by the "output" function
from merge-recursive. But that function in merge-recursive exists to
indent output based on the level of recursion and there is no similar
justification for such a function in "notes merge".
Noticed with 'make CC="gcc -std=c89 -pedantic"':
notes-merge.c:24:22: warning: anonymous variadic macros were introduced in C99 [-Wvariadic-macros]
Encouraged-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because git_path() calls vsnprintf(), code like
fd = open(git_path("SQUASH_MSG"), O_WRONLY | O_CREAT, 0666);
die_errno(_("Could not write to '%s'"), git_path("SQUASH_MSG"));
can end up printing an error indicator from vsnprintf() instead of
open() by mistake. Store the path we are trying to write to in a
temporary variable and pass _that_ to die_errno(), so the messages
written by git cherry-pick/revert and git merge can avoid this source
of confusion.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The add_extra_ref() interface is used to add an extra-ref that is _not_
our ref for the purpose of helping auto-following of tags and reducing
object transfer from remote repository, and they are typically formatted
as a tagname followed by ^{} to make sure no valid refs match that
pattern. In other words, these entries are deliberately formatted not to
pass check-refname-format test.
A recent series however added a test unconditionally to the add_ref()
function that is called from add_extra_ref(). The check may be sensible
for other two callsites of the add_ref() interface, but definitely is
a wrong thing to do in add_extra_ref(). Disable it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
|
|
This is to avoid reaching free of uninitialized members.
With an invalid .mailmap (and perhaps in other cases), it can reach
free(mi->name) with garbage for example.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some of the fatal messages printed by revert and cherry-pick look ugly
like the following:
fatal: Could not open .git/sequencer/todo.: No such file or directory
The culprit here is that these callers of the die_errno() function did not
take it into account that the message string they give to it is followed
by ": <strerror>", hence the message typically should not end with the
full-stop.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Martin von Zweigbergk
Erik Faye-Lund
Michael Haggerty
Sebastian Morr
Jack Nagel
Vincent van Ravesteijn
Jonathan Nieder
Johannes Sixt
Nguyễn Thái Ngọc Duy
Ramsay Jones
Thomas Hochstein
Marc-André Lureau
Ramkumar Ramachandra