| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Having it named as 'config' prevents us from tracking a
ref named 'config', which is a huge mistake.
On the non-technical side, the word 'config' implies that
a user can freely modify it; but that's not the case
here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
* Fixed logic for renaming old .rev_db -> .rev_db.$uuid
* correctly handle manual migrations for those who decide to
start use globbing to handle branches/tags over individual
'fetch' keys
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
This works similarly to 'svn update' or 'git pull' except that
it preserves linear history with 'git rebase' instead of 'git
merge' for ease of dcommit-ing with git-svn.
While we're at it, put the working_head_info() logic
into its own function and allow --fetch-all/--all for
dcommit and rebase (which will fetch all refs in the
current [svn-remote] instead of just the working one).
Note that the '-a' switch (short for --fetch-all/--all) has been
removed as it conflicts with the non-svn 'git fetch'
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
On newly-created repositories, 'refs/heads/master' does not
point to anything. This can be confusing to new users; so we
update 'master' to point to the last imported ref after fetching
is done.
Once 'master' is valid; we assume HEAD points to it; and if
the repository is not bare, then checkout the files if the
working tree is clean and unused.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Force the showing of the --minimize flag as an option in the
'migrate' help.
Also, fix the usage function to correctly filter out
the deprecated aliases.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
This allows users to use SVM (SVN::Mirror) to mirror a remote
repository to use dcommit to commit to the repository that SVM
was mirroring. When dcommit is used in this manner, the automatic
fetch + rebase/reset does not happen; in which case the user will
have to manually invoke svm/svk, run 'git svn fetch', and finally
'git rebase'.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
We don't end up trying to pass an undef URL over to SVN::Ra->new
because it'll segfault.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Also, warn about dirty indices and avoid an unncessary
write-tree call if the index is clean.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
The newer default value should should lower memory usage for
large fetches and also help with fetching from less reliable
servers. Previously the value was 1000 and memory usage
got a bit high on some repositories and fetching became
less reliable in some cases.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Also, some changes to avoid creating dead dirs under
.git/svn/. We now create all directories as late as
possible.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
* avoid skipping modification-only changes in fetch
* correctly fetch when we only have branches and tags
to glob from (no fetch keys defined)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
multi-init is now just an alias that requires -T/-t/-b;
all options that 'init' can now accept.
This will hopefully simplify usage and reduce typing.
Also, allow the --shared option in 'init' to take an optional
argument now that 'git-init --shared' supports an optional
argument.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
multi-fetch is deprecated, "fetch -a" is easier to type
By default, fetch will fetch everything from its default
[svn-remote]; if fetch [--all|-a] is specified, then it will
fetch from all svn remotes. Refspecs on the command-line
(like git-fetch) are not supported.
Also, enable -r/--revision arguments for fetch so
users can shoot themselves in the foot^W^W^W^W^W
skip some history and do the equivalent of a shallow
clone/fetch they're not interested in.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Some of the repo-config => config renaming missed the git-svn
tests; so I'm just renaming them to be consisten with the
rest of the modern git.
Also, some of the newer tests didn't have 'poke' in them
to workaround race conditions on fast machines. This adds
places where they can _possibly_ occur; but I don't have
fast enough hardware to trigger them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Similar in spirit to the recent dcommit change, we now
look at 'HEAD' by default to look for a GIT_SVN_ID
so the user won't have to pass -i <GIT_SVN_ID> argument.
We are also more tolerant of of people passing bare remote names
as a result (just $GIT_SVN_ID without the -i)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Merge commits can be created when following certain parents,
(most notably 'R' cases) and we definitely don't want to exclude
them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
* dcommit no longer requires the correct -i/GIT_SVN_ID option
passed to it. Since you're committing from HEAD (or another
commit that is a parent of HEAD), you'll be able to find
a commit with metadata information containing the SVN URL
that your HEAD was descended from anyways.
* I don't think dcommit ever worked for people using the
noMetadata option; so I don't think relying on metadata
is an issue.
* useSvmProps users shouldn't commit to SVN::Mirror created
repositories anyways, right?
* Users of globbing should automatically be able to commit
to paths that are not explicitly set in .git/config
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
A manual test that sets up a repository that looks like an SVK depot,
and then imports it to check that it looks like we mirrored the
'original' source.
There is also a minor modification to the git-svn test library shell
file which sets a variable for the subversion repository's filesystem
path.
[ew: made some of the tests stricter and more thorough]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
multi-init did not write a svn-remote.<remote>.url config
entry without a --trunk argument.
Also, The svm:mirror property is used by SVN::Mirror to track
the path of the repository that we are mirroring. We need to
append that to the source (which is (presumably) just the URL of
the repository root).
Lastly, we now look harder for svm:(source|mirror|uuid) properties
in sub and parent directories. Since our relative path could
be tweaked.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Even if nothing touched paths we care about in a fetch;
increment the maxRev like we do with rev_db since
we don't like having to run get_log on revisions we've
seen before.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
We need a separate .rev_db file for each repository we're
tracking. This allows us to track the same logical path off
multiple mirrors. We preserve a symlink to the old .rev_db
(no-UUID) if we're (auto-)migrating from an old version to
preserve backwards compatibility.
Also, get rid of the uuid() wrapper since we cache UUID in our
private config, and the SVN::Ra::get_uuid() function memoizes
the return value per-connection.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Make sure we flush our userspace buffers and and fsync(2)
.rev_db information to disk if we use these options because
we really don't want to lose this information.
Also, disallow --use-svm-props and --no-metadata from the
command-line because history will be inconsistent if they're
only used occasionally. If a user wants to use these options,
they must be set in the config so they're always on.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Switch max_rev storage over to using it for globbing
branches and tags.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Available options are currently:
svn-remote.<remote>.{noMetadata,useSvmProps,followParent}
These boolean switches will override options set globally in
[svn], and even override options set on the command-line (this
should probably change in the future, however).
Note that the noMetadata and useSvmProps options conflict. It's
both technically and logically impossible to use them together.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Pass --use-svm-props or set the svn.usesvmprops key with git-config
to enable using properties set by SVN::Mirror when it mirrored the
upstream URL.
This is heavily based on work from Sam Vilain:
> From: Sam Vilain <sam@vilain.net>
> Date: Sun, 11 Feb 2007 12:34:45 +1300
> Subject: [PATCH] git-svn: re-map repository URLs and UUIDs on SVK mirror paths
>
> If an SVN revision has a property, "svm:headrev", it is likely that
> the revision was created by SVN::Mirror (a part of SVK). The property
> contains a repository UUID and a revision. We want to make it look
> like we are mirroring the original URL, so introduce a helper function
> that returns the original identity URL and UUID, and use it when
> generating commit messages.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
I may resurrect it for dcommit at some point, but nobody really
uses set-tree anymore and I don't feel like introducing more
complexity into the code at this point.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Several bugs were found and fixed while getting this to work:
* Remember the 'R'(eplace) case of actions and treat it like we
would an 'A'(dd) case.
* Fix a small case of follow-parent missing a parent if a
subdirectory was modified in the revision where the parent was
copied.
* dirents returned by get_dir sometimes expire if the data
structure is too big and the pool is destroyed, so we
cache get_dir (along with check_path and get_revprops)
temporarily along with its pool.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
I incorrectly used $path/? and $path/* to strip off leading
directories, but places where $path = 'branches/0.17' would
incorrectly strip changes to 'branches/0.17.1' as well.
For globs, we require that our '*' is its own path component
(surrounded by '/' or nothing). Enforce this when --prefix= is
passed to us, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
--no-follow-parent disables and reverts it back to the old
default behavior of not following parents (if you don't care for
full history).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
We don't need them anymore, all the rough points of
the --follow-parent implementation have been worked out.
The only improvement in the future will probably be
--follow-parent-harder, which will track subdirectories and
follow individual file history (so annotate/blame can be
complete); but that is still a ways off.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
These checks were needed before git-svn got smarter about
match_paths() and using path information returned by get_log().
We also have extra checking against fetching revisions
out-of-order these days; so we don't have to worry about that as
much. We also check for tree deletions in match_paths() and
skip those as well.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
We can have a branch that was deleted, then re-added under the
same name but copied from another path, in which case we'll have
multiple parents (we don't want to break the original ref, nor
lose copypath info).
Add a test for this, too, of course.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
This is similar to the way git proper handles refs, except we
use the keys 'branches' and 'tags' to distinguish when we want
to use wildcards.
The left-hand side of the ':' contains the remote path, and must
have one asterisk ('*') in it for the branch name. The asterisk
may be in any component of the path as long as is it on its own
directory level.
The right-hand side contains the refname and must have the
asterisk as the last path component.
branches = branches/*:refs/remotes/*
tags = tags/*:refs/remotes/tags/*
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
This is an optimization that should conserve network
bandwidth on certain repositories and configurations.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
We'll need to rely on path matching to handle wildcard support for branches and
tags.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Update the tests since we no longer write so many things to the
config.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
It can be confusing and redundant, since historically the
default remote ref (not remote itself) has been "git-svn", too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Since fetch_loop_common starts from the lowest revision number
in a group of Git::SVN objects; we want to avoid refetching
get_log for current users for things we've already cut it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
This was originally needed before we used the delta fetcher and
had a less-clean follow-parent implementation that could leave
holes in the history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
It looks better (like [remote "origin"]) instead of whatever
refname came up first in our directory traversal. Of course
--remote= overrides this.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Having 'fetch' entries in the config file created from
--follow-parent is wasteful because it can cause *future* of
invocations to follow revisions we were never interested in
in the first place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Using buffered IO for reading 40-41 bytes at a time isn't very
efficient. Buffering writes for a short duration is alright
since we close() right away and buffers will be flushed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Prefill .rev_db to the maximum revision we tried to fetch;
and take advantage of that so we can avoid using get_log()
on ranges we've already seen (and have deemed uninteresting).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Defer any signals that cause termination while they are
updating; and put the update-ref call as close to the rename()
as possible. Also, make things extra-safe (but slower) for
people using --no-metadata since they can't rely on .rev_db
being rebuilt if it's clobbered (well, I'm calling update-ref
with the -m flag for reflogs, we don't yet have a way to rebuild
.rev_db from reflogs.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Passing very large strings as arguments is bad for memory usage
as it never seems to get freed in Perl. The .rev_db format is
already not optimized for projects with sparse history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
get_log with explicit paths is the safest way to get revisions
that change a particular path we're interested in.
Unfortunately that means we still have to run get_log multiple
times for each path we're interested in, and even more if
a path gets deleted.
The first argument of get_log() is an array reference, but we
shouldn't use more than one element in that array ref because
the non-existence of _one_ of those paths for a particular range
would cause an error for all paths in that range, so yes, we
need multiple get_log calls to be on the safe side...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
Eric Wong
sam@vilain.net