| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Like the callsites in the previous commit, logmsg_reencode
already falls back to read_sha1_file when necessary.
However, I split its conversion out into its own commit
because it's a bit more complex.
We return either:
1. The original commit->buffer
2. A newly allocated buffer from read_sha1_file
3. A reencoded buffer (based on either 1 or 2 above).
while trying to do as few extra reads/allocations as
possible. Callers currently free the result with
logmsg_free, but we can simplify this by pointing them
straight to unuse_commit_buffer. This is a slight layering
violation, in that we may be passing a buffer from (3).
However, since the end result is to free() anything except
(1), which is unlikely to change, and because this makes the
interface much simpler, it's a reasonable bending of the
rules.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For both of these sites, we already do the "fallback to
read_sha1_file" trick. But we can shorten the code by just
using get_commit_buffer.
Note that the error cases are slightly different when
read_sha1_file fails. get_commit_buffer will die() if the
object cannot be loaded, or is a non-commit.
For get_sha1_oneline, this will almost certainly never
happen, as we will have just called parse_object (and if it
does, it's probably worth complaining about).
For record_author_date, the new behavior is probably better;
we notify the user of the error instead of silently ignoring
it. And because it's used only for sorting by author-date,
somebody examining a corrupt repo can fallback to the
regular traversal order.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some call sites check commit->buffer to see whether we have
a cached buffer, and if so, do some work with it. In the
long run we may want to switch these code paths to make
their decision on a different boolean flag (because checking
the cache may get a little more expensive in the future).
But for now, we can easily support them by converting the
calls to use get_cached_commit_buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many sites look at commit->buffer to get more detailed
information than what is in the parsed commit struct.
However, we sometimes drop commit->buffer to save memory,
in which case the caller would need to read the object
afresh. Some callers do this (leading to duplicated code),
and others do not (which opens the possibility of a segfault
if somebody else frees the buffer).
Let's provide a pair of helpers, "get" and "unuse", that let
callers easily get the buffer. They will use the cached
buffer when possible, and otherwise load from disk using
read_sha1_file.
Note that we also need to add a "get_cached" variant which
returns NULL when we do not have a cached buffer. At first
glance this seems to defeat the purpose of "get", which is
to always provide a return value. However, some log code
paths actually use the NULL-ness of commit->buffer as a
boolean flag to decide whether to try printing the
commit. At least for now, we want to continue supporting
that use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Right now this is just a one-liner, but abstracting it will
make it easier to change later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This converts two lines into one at each caller. But more
importantly, it abstracts the concept of freeing the buffer,
which will make it easier to change later.
Note that we also need to provide a "detach" mechanism for a
tricky case in index-pack. We are passed a buffer for the
object generated by processing the incoming pack. If we are
not using --strict, we just calculate the sha1 on that
buffer and return, leaving the caller to free it. But if we
are using --strict, we actually attach that buffer to an
object, pass the object to the fsck functions, and then
detach the buffer from the object again (so that the caller
can free it as usual). In this case, we don't want to free
the buffer ourselves, but just make sure it is no longer
associated with the commit.
Note that we are making the assumption here that the
attach/detach process does not impact the buffer at all
(e.g., it is never reallocated or modified). That holds true
now, and we have no plans to change that. However, as we
abstract the commit_buffer code, this dependency becomes
less obvious. So when we detach, let's also make sure that
we get back the same buffer that we gave to the
commit_buffer code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This simplifies the code, as logmsg_reencode handles the
reencoding for us in a single call. It also means we learn
logmsg_reencode's trick of pulling the buffer from disk when
commit->buffer is NULL (we currently just silently return!).
It is doubtful this matters in practice, though, as
sequencer operations would not generally turn off
save_commit_buffer.
Note that we may be fixing a bug here. The existing code
does:
if (same_encoding(to, from))
reencode_string(buf, to, from);
That probably should have been "!same_encoding".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The return value from logmsg_reencode may be either a newly
allocated buffer or a pointer to the existing commit->buffer.
We would not want the caller to accidentally free() or
modify the latter, so let's mark it as const. We can cast
away the constness in logmsg_free, but only once we have
determined that it is a free-able buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In both blame and merge-recursive, we sometimes create a
"fake" commit struct for convenience (e.g., to represent the
HEAD state as if we would commit it). By allocating
ourselves rather than using alloc_commit_node, we do not
properly set the "index" field of the commit. This can
produce subtle bugs if we then use commit-slab on the
resulting commit, as we will share the "0" index with
another commit.
We can fix this by using alloc_commit_node() to allocate.
Note that we cannot free the result, as it is part of our
commit allocator. However, both cases were already leaking
the allocated commit anyway, so there's nothing to fix up.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Whenever we create a commit object via lookup_commit, we
give it a unique index to be used with the commit-slab API.
The theory is that any "struct commit" we create would
follow this code path, so any such struct would get an
index. However, callers could use alloc_commit_node()
directly (and get multiple commits with index 0).
Let's push the indexing into alloc_commit_node so that it's
hard for callers to get it wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 2c1cbec (Use proper object allocators for unknown
object nodes too, 2007-04-16), added a special "any_object"
allocator, it never taught alloc_report to report on it. To
do so we need to add an extra type argument to the REPORT
macro, as that commit did for DEFINE_ALLOCATOR.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not a good idea to strbuf_attach an arbitrary pointer
just because a function you are calling wants a strbuf.
Attaching implies a transfer of memory ownership; if anyone
were to modify or release the resulting strbuf, we would
free() the pointer, leading to possible problems:
1. Other users of the original pointer might access freed
memory.
2. The pointer might not be the start of a malloc'd
area, so calling free() on it in the first place would
be wrong.
In the two cases modified here, we are fortunate that nobody
touches the strbuf once it is attached, but it is an
accident waiting to happen. Since the previous commit,
commit_tree and friends take a pointer/buf pair, so we can
just do away with the strbufs entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While strbufs are pretty common throughout our code, it is
more flexible for functions to take a pointer/len pair than
a strbuf. It's easy to turn a strbuf into such a pair (by
dereferencing its members), but less easy to go the other
way (you can strbuf_attach, but that has implications about
memory ownership).
This patch teaches commit_tree (and its associated callers
and sub-functions) to take such a pair for the commit
message rather than a strbuf. This makes passing the buffer
around slightly more verbose, but means we can get rid of
some dangerous strbuf_attach calls in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
This is expected to be the final maintenance release for 1.9 series,
merging the remaining fixes that are relevant and are already in 2.0.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These were originally removed by 0232852 (t5537: move
http tests out to t5539, 2014-02-13). However, they were
accidentally re-added in 1ddb4d7 (Merge branch
'nd/upload-pack-shallow', 2014-03-21).
This looks like an error in manual conflict resolution.
Here's what happened:
1. v1.9.0 shipped with the http tests in t5537.
2. We realized that this caused problems, and built
0232852 on top to move the tests to their own file.
This fix made it into v1.9.1.
3. We later had another fix in nd/upload-pack-shallow that
also touched t5537. It was built directly on v1.9.0.
When we merged nd/upload-pack-shallow to master, we got a
conflict; it was built on a version with the http tests, but
we had since removed them. The correct resolution was to
drop the http tests and keep the new ones, but instead we
kept everything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rh/prompt-pcmode-avoid-eval-on-refname:
git-prompt.sh: don't assume the shell expands the value of PS1
|
|
* mw/symlinks:
setup: fix windows path buffer over-stepping
setup: don't dereference in-tree symlinks for absolute paths
setup: add abspath_part_inside_repo() function
t0060: add tests for prefix_path when path begins with work tree
t0060: add test for prefix_path when path == work tree
t0060: add test for prefix_path on symlinks via absolute paths
t3004: add test for ls-files on symlinks via absolute paths
|
|
|
|
Hopefully for the last time ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
double quotes, or articles
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of showing a warning and working as before, fail and show
the message and force immediate upgrade from their upstream
repositories when these tools are run, per request from their
primary author.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'jc/graduate-remote-hg-bzr' (early part):
remote-helpers: point at their upstream repositories
contrib: remote-helpers: add move warnings (v2.0)
Revert "Merge branch 'fc/transport-helper-sync-error-fix'"
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tools are now maintained out-of-tree, and they have a regression
in v2.0. It's better to start warning the users as soon as possible.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit d508e4a8e2391ae2596403b6478d01cf3d5f928f,
reversing changes made to e42552135a2a396f37053a89f44952ea907870b2.
The author of the original topic says he broke the upcoming 2.0
release with something that relates to "synchronization crash
regression" while refusing to give further specifics, so this would
unfortunately be the safest option for the upcoming release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rh/prompt-pcmode-avoid-eval-on-refname:
git-prompt.sh: don't assume the shell expands the value of PS1
|
|
Not all shells subject the prompt string to parameter expansion. Test
whether the shell will expand the value of PS1, and use the result to
control whether raw ref names are included directly in PS1.
This fixes a regression introduced in commit 8976500 ("git-prompt.sh:
don't put unsanitized branch names in $PS1"): zsh does not expand PS1
by default, but that commit assumed it did. The bug resulted in
prompts containing the literal string '${__git_ps1_branch_name}'
instead of the actual branch name.
Reported-by: Caleb Thompson <caleb@calebthompson.io>
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* lt/request-pull:
request-pull: resurrect for-linus -> tags/for-linus DWIM
|
|
* jl/use-vsatisfy-correctly-for-2.0:
git-gui: tolerate major version changes when comparing the git version
|
|
* git://github.com/git-l10n/git-po:
fr: a lot of good fixups
|
|
* kb/fast-hashmap:
Documentation/technical/api-hashmap: remove source highlighting
|
|
The highlighting was pretty, but unfortunately, the failure mode
when source-highlight is not installed was that the entire code
block disappears.
See https://bugs.debian.org/745591,
https://bugs.launchpad.net/bugs/1316810.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since git 2.0.0 starting git gui in a submodule using a gitfile fails with
the following error:
No working directory ../../../<path>
couldn't change working directory
to "../../../<path>": no such file or
directory
This is because "git rev-parse --show-toplevel" is only run when git gui
sees a git version of at least 1.7.0 (which is the version in which the
--show-toplevel option was introduced). But "package vsatisfies" returns
false when the major version changes, which is not what we want here.
Fix that for both places where the git version is checked using vsatisfies
by appending a '-' to the version number. This tells vsatisfies that a
change of the major version is not considered to be a problem, as long as
the new major version is larger. This is done for both the place that
caused the reported bug and another spot where the git version is tested
for another feature.
Reported-by: Chris Packham <judge.packham@gmail.com>
Reported-by: Yann Dirson <ydirson@free.fr>
Helped-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Tested-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Grégoire Paris <postmaster@greg0ire.fr>
Acked-by: Jean-Noel Avila <jn.avila@free.fr>
|
|
Older versions of Git before v1.7.10 did not DWIM
$ git pull $URL for-linus
to the tag "tags/for-linus" and the users were required to say
$ git pull $URL tags/for-linus
instead. Because newer versions of Git works either way,
request-pull used to show tags/for-linus when asked
$ git request-pull origin/master $URL for-linus
The recent updates broke this and in the output we see "for-linus"
without the "tags/" prefix.
As v1.7.10 is more than 2 years old, this should matter very little
in practice, but resurrecting it is very simple.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fc/prompt-zsh-read-from-file:
contrib: completion: fix 'eread()' namespace
|
|
Otherwise it might collide with a function of the same name in the
user's environment.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://github.com/git-l10n/git-po:
l10n: Updated Bulgarian translation of git (1307t0f921u)
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
|
|
|
|
The third maintenance release for Git 1.9; contains all the fixes
that are scheduled to appear in Git 2.0 since 1.9.2.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
shell doc: remove stray "+" in example
Start preparing for 1.9.3
|
|
The git-shell(1) manpage says
EXAMPLE
To disable interactive logins, displaying a greeting
instead:
+
$ chsh -s /usr/bin/git-shell
$ mkdir $HOME/git-shell-commands
[...]
The stray "+" has been there ever since the example was added in
v1.8.3-rc0~210^2 (shell: new no-interactive-login command to print a
custom message, 2013-03-09). The "+" sign between paragraphs is
needed in asciidoc to attach extra paragraphs to a list item but here
it is not needed and ends up rendered as a literal "+". Remove it.
A quick search with "grep -e '<p>+' /usr/share/doc/git/html/*.html"
doesn't find any other instances of this problem.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'master' of git://github.com/git-l10n/git-po:
l10n: Fix a couple of typos in the Swedish translation
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git p4" dealing with changes in binary files were broken by a
change in 1.9 release.
* cl/p4-use-diff-tree:
git-p4: format-patch to diff-tree change breaks binary patches
|
|
The shell prompt script (in contrib/), when using the PROMPT_COMMAND
interface, used an unsafe construct when showing the branch name in
$PS1.
* rh/prompt-pcmode-avoid-eval-on-refname:
git-prompt.sh: don't put unsanitized branch names in $PS1
|
Jeff King
Junio C Hamano
Jason St. John
Felipe Contreras
Richard Hansen
Anders Kaseorg
Jens Lehmann
Grégoire Paris
Alexander Shopov
Jonathan Nieder