| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the upcoming patch, we will support rebase -i's progress
reporting. The progress skips comments but counts 'noop's.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parsing part of a 'drop' command is almost identical to parsing a
'pick', while the operation is the same as that of a 'noop'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The interactive rebase has the very special magic that a cherry-pick
that exits with a status different from 0 and 1 signifies a failure to
even record that a cherry-pick was started.
This can happen e.g. when a fast-forward fails because it would
overwrite untracked files.
In that case, we must reschedule the command that we thought we already
had at least started successfully.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sequencer already has an idea about using different merge
strategies. We just piggy-back on top of that, using rebase -i's
own settings, when running the sequencer in interactive rebase mode.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's `rebase` command inspects the `rebase.autostash` config setting
to determine whether it should stash any uncommitted changes before
rebasing and re-apply them afterwards.
As we introduce more bits and pieces to let the sequencer act as
interactive rebase's backend, here is the part that adds support for
the autostash feature.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When continuing after a `pick` command failed, we want that commit
to show up in the rewritten-list (and its notes to be rewritten), too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rebasing commits that have commit notes attached, the interactive
rebase rewrites those notes faithfully at the end. The sequencer must
do this, too, if it wishes to do interactive rebase's job.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already used the same reflog message as the scripted version of rebase
-i when finishing. With this commit, we do that also for all the commands
before that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes the code DRYer, with the obvious benefit that we can enhance
the code further in a single place.
We can also reuse the functionality elsewhere by calling this new
function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sequencer already knew how to fast-forward instead of
cherry-picking, if possible.
We want to continue to do this, of course, but in case of the 'reword'
command, we will need to call `git commit` after fast-forwarding.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is now trivial, as all the building blocks are in place: all we need
to do is to flip the "edit" switch when committing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When doing an interactive rebase, we want to leave a 'patch' file for
further inspection by the user (even if we never tried to actually apply
that patch, since we're cherry-picking instead).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An interactive rebase operates on a detached HEAD (to keep the reflog
of the original branch relatively clean), and updates the branch only
at the end.
Now that the sequencer learns to perform interactive rebases, it also
needs to learn the trick to update the branch before removing the
directory containing the state of the interactive rebase.
We introduce a new head_ref variable in a wider scope than necessary at
the moment, to allow for a later patch that prints out "Successfully
rebased and updated <ref>".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the last command of an interactive rebase fails, the user needs to
resolve the problem and then continue the interactive rebase. Naturally,
the todo script is empty by then. So let's not complain about that!
To that end, let's move that test out of the function that parses the
todo script, and into the more high-level function read_populate_todo().
This is also necessary by now because the lower-level parse_insn_buffer()
has no idea whether we are performing an interactive rebase or not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a cherry-pick continues without a "todo script", the intention is
simply to pick a single commit.
However, when an interactive rebase is continued without a "todo
script", it means that the last command has been completed and that we
now need to clean up.
This commit guards the revert/cherry-pick specific steps so that they
are not executed in rebase -i mode.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The scripted version of the interactive rebase already does that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an interactive rebase is interrupted, the user may stage changes
before continuing, and we need to commit those changes in that case.
Please note that the nested "if" added to the sequencer_continue() is
not combined into a single "if" because it will be extended with an
"else" clause in a later patch in this patch series.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the interactive rebase aborts, it writes out an author-script file
to record the author information for the current commit. As we are about
to teach the sequencer how to perform the actions behind an interactive
rebase, it needs to write those author-script files, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For users' convenience, most rebase commands can be abbreviated, e.g.
'p' instead of 'pick' and 'x' instead of 'exec'. Let's teach the
sequencer to handle those abbreviated commands just fine.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a huge patch, and at the same time a huge step forward to
execute the performance-critical parts of the interactive rebase in a
builtin command.
Since 'fixup' and 'squash' are not only similar, but also need to know
about each other (we want to reduce a series of fixups/squashes into a
single, final commit message edit, from the user's point of view), we
really have to implement them both at the same time.
Most of the actual work is done by the existing code path that already
handles the "pick" and the "edit" commands; We added support for other
features (e.g. to amend the commit message) in the patches leading up to
this one, yet there are still quite a few bits in this patch that simply
would not make sense as individual patches (such as: determining whether
there was anything to "fix up" in the "todo" script, etc).
In theory, it would be possible to reuse the fast-forward code path also
for the fixup and the squash code paths, but in practice this would make
the code less readable. The end result cannot be fast-forwarded anyway,
therefore let's just extend the cherry-picking code path for now.
Since the sequencer parses the entire `git-rebase-todo` script in one go,
fixup or squash commands without a preceding pick can be reported early
(in git-rebase--interactive, we could only report such errors just before
executing the fixup/squash).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the interactive rebase, commands that were successfully processed are
not simply discarded, but appended to the 'done' file instead. This is
used e.g. to display the current state to the user in the output of
`git status` or the progress.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When calling `git rebase -i -v`, the user wants to see some statistics
after the commits were rebased. Let's show some.
The strbuf we use to perform that task will be used for other things
in subsequent commits, hence it is declared and initialized in a wider
scope than strictly needed here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'exec' command is a little special among rebase -i's commands, as it
does *not* have a SHA-1 as first parameter. Instead, everything after the
`exec` command is treated as command-line to execute.
Let's reuse the arg/arg_len fields of the todo_item structure (which hold
the oneline for pick/edit commands) to point to the command-line.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch is a straight-forward reimplementation of the `edit`
operation of the interactive rebase command.
Well, not *quite* straight-forward: when stopping, the `edit`
command wants to write the `patch` file (which is not only the
patch, but includes the commit message and author information). To
that end, this patch requires the earlier work that taught the
log-tree machinery to respect the `file` setting of
rev_info->diffopt to write to a file stream different than stdout.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'noop' command is probably the most boring of all rebase -i commands
to support in the sequencer.
Which makes it an excellent candidate for this first stab to add support
for rebase -i's commands to the sequencer.
For the moment, let's also treat empty lines and commented-out lines as
'noop'; We will refine that handling later in this patch series.
To make it easier to identify "classes" of todo_commands (such as:
determine whether a command is pick-like, i.e. handles a single commit),
let's enforce a certain order of said commands.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch introduces a new action for the sequencer. It really does not
do a whole lot of its own right now, but lays the ground work for
patches to come. The intention, of course, is to finally make the
sequencer the work horse of the interactive rebase (the original idea
behind the "sequencer" concept).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is actually not safe to look for a commit message by looking for the
first empty line and skipping it.
The find_commit_subject() function looks more carefully, so let's use
it. Since we are interested in the entire commit message, we re-compute
the string length after verifying that the commit subject is not empty
(in which case the entire commit message would be empty, something that
should not happen but that we want to handle gracefully).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is the current coding style of the Git project to write
if (...) {
...
} else {
...
}
instead of putting the closing brace and the "else" keyword on separate
lines.
Pointed out by Junio Hamano.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was noticed while addressing Junio Hamano's concern that some
"else" operators were on separate lines than the preceding closing
brace.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/lock-report-on-error:
lockfile: move REPORT_ON_ERROR bit elsewhere
|
|
There was LOCK_NO_DEREF defined as 2 = 1<<1 with the same value,
which was missed due to a huge comment block. Deconflict by moving
the new one to 4 = 1<<2 for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the isatty() emulation for Windows by updating the previous
hack that depended on internals of (older) MSVC runtime.
* js/mingw-isatty:
mingw: replace isatty() hack
mingw: fix colourization on Cygwin pseudo terminals
mingw: adjust is_console() to work with stdin
|
|
Update GitLFS integration with "git p4".
* ls/p4-lfs:
git-p4: add diff/merge properties to .gitattributes for GitLFS files
|
|
* va/i18n-even-more:
i18n: fix misconversion in shell scripts
|
|
"git shortlog" learned "--committer" option to group commits by
committer, instead of author.
* lt/shortlog-by-committer:
t4201: make tests work with and without the MINGW prerequiste
shortlog: test and document --committer option
shortlog: group by committer information
|
|
A potential but unlikely buffer overflow in Windows port has been
fixed.
* mk/mingw-winansi-ttyname-termination-fix:
mingw: consider that UNICODE_STRING::Length counts bytes
|
|
"git p4" that tracks multile p4 paths imported a single changelist
that touches files in these multiple paths as one commit, followed
by many empty commits. This has been fixed.
* gv/p4-multi-path-commit-fix:
git-p4: fix multi-path changelist empty commits
|
|
Even though an fix was attempted in Git 2.9.3 days, but running
"git difftool --dir-diff" from a subdirectory never worked. This
has been fixed.
* jk/difftool-in-subdir:
difftool: rename variables for consistency
difftool: chdir as early as possible
difftool: sanitize $workdir as early as possible
difftool: fix dir-diff index creation when in a subdirectory
|
|
"git p4" misbehaved when swapping a directory and a symbolic link.
* ld/p4-compare-dir-vs-symlink:
git-p4: avoid crash adding symlinked directory
|
|
Doc update.
* ls/filter-process:
t0021: fix flaky test
docs: warn about possible '=' in clean/smudge filter process values
|
|
Finer-grained control of what protocols are allowed for transports
during clone/fetch/push have been enabled via a new configuration
mechanism.
* bw/transport-protocol-policy:
http: respect protocol.*.allow=user for http-alternates
transport: add from_user parameter to is_transport_allowed
http: create function to get curl allowed protocols
transport: add protocol policy config option
http: always warn if libcurl version is too old
lib-proto-disable: variable name fix
|
|
"git merge --continue" has been added as a synonym to "git commit"
to conclude a merge that has stopped due to conflicts.
* cp/merge-continue:
merge: mark usage error strings for translation
merge: ensure '--abort' option takes no arguments
completion: add --continue option for merge
merge: add '--continue' option as a synonym for 'git commit'
|
|
Porcelain scripts written in Perl are getting internationalized.
* va/i18n-perl-scripts:
i18n: difftool: mark warnings for translation
i18n: send-email: mark composing message for translation
i18n: send-email: mark string with interpolation for translation
i18n: send-email: mark warnings and errors for translation
i18n: send-email: mark strings for translation
i18n: add--interactive: mark status words for translation
i18n: add--interactive: remove %patch_modes entries
i18n: add--interactive: mark edit_hunk_manually message for translation
i18n: add--interactive: i18n of help_patch_cmd
i18n: add--interactive: mark patch prompt for translation
i18n: add--interactive: mark plural strings
i18n: clean.c: match string with git-add--interactive.perl
i18n: add--interactive: mark strings with interpolation for translation
i18n: add--interactive: mark simple here-documents for translation
i18n: add--interactive: mark strings for translation
Git.pm: add subroutines for commenting lines
|
|
Minor code clean-up.
* sb/submodule-config-cleanup:
submodule-config: clarify parsing of null_sha1 element
submodule-config: rename commit_sha1 to treeish_name
submodule config: inline config_from_{name, path}
|
|
A lazy "git push" without refspec did not internally use a fully
specified refspec to perform 'current', 'simple', or 'upstream'
push, causing unnecessary "ambiguous ref" errors.
* jc/push-default-explicit:
push: test pushing ambiguously named branches
push: do not use potentially ambiguous default refspec
|
|
Git for Windows has carried a patch that depended on internals
of MSVC runtime, but it does not work correctly with recent MSVC
runtime. A replacement was written originally for compiling
with VC++. The patch in this message is a backport of that
replacement, and it also fixes the previous attempt to make
isatty() tell that /dev/null is *not* an interactive terminal.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Tested-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git only colours the output and uses pagination if isatty() returns 1.
MSYS2 and Cygwin emulate pseudo terminals via named pipes, meaning that
isatty() returns 0.
f7f90e0f4f (mingw: make isatty() recognize MSYS2's pseudo terminals
(/dev/pty*), 2016-04-27) fixed this for MSYS2 terminals, but not for
Cygwin.
The named pipes that Cygwin and MSYS2 use are very similar. MSYS2 PTY pipes
are called 'msys-*-pty*' and Cygwin uses 'cygwin-*-pty*'. This commit
modifies the existing check to allow both MSYS2 and Cygwin PTY pipes to be
identified as TTYs.
Note that pagination is still broken when running Git for Windows from
within Cygwin, as MSYS2's less.exe is spawned (and does not like to
interact with Cygwin's PTY).
This partially fixes https://github.com/git-for-windows/git/issues/267
Signed-off-by: Alan Davies <alan.n.davies@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When determining whether a handle corresponds to a *real* Win32 Console
(as opposed to, say, a character device such as /dev/null), we use the
GetConsoleOutputBufferInfo() function as a tell-tale.
However, that does not work for *input* handles associated with a
console. Let's just use the GetConsoleMode() function for input handles,
and since it does not work on output handles fall back to the previous
method for those.
This patch prepares for using is_console() instead of my previous
misguided attempt in cbb3f3c9b1 (mingw: intercept isatty() to handle
/dev/null as Git expects it, 2016-12-11) that broke everything on
Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
Junio C Hamano
Jeff Hostetler
Alan Davies