| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As with export-marks in the previous commit, import-marks can access the
filesystem. This is significantly less dangerous than export-marks
because it only involves reading from arbitrary paths, rather than
writing them. However, it could still be surprising and have security
implications (e.g., exfiltrating data from a service that accepts
fast-import streams).
Let's lump it (and its "if-exists" counterpart) in with export-marks,
and enable the in-stream version only if --allow-unsafe-features is set.
Signed-off-by: Jeff King <peff@peff.net>
|
|
The fast-import stream command "feature export-marks=<path>" lets the
stream write marks to an arbitrary path. This may be surprising if you
are running fast-import against an untrusted input (which otherwise
cannot do anything except update Git objects and refs).
Let's disallow the use of this feature by default, and provide a
command-line option to re-enable it (you can always just use the
command-line --export-marks as well, but the in-stream version provides
an easy way for exporters to control the process).
This is a backwards-incompatible change, since the default is flipping
to the new, safer behavior. However, since the main users of the
in-stream versions would be import/export-based remote helpers, and
since we trust remote helpers already (which are already running
arbitrary code), we'll pass the new option by default when reading a
remote helper's stream. This should minimize the impact.
Note that the implementation isn't totally simple, as we have to work
around the fact that fast-import doesn't parse its command-line options
until after it has read any "feature" lines from the stream. This is how
it lets command-line options override in-stream. But in our case, it's
important to parse the new --allow-unsafe-features first.
There are three options for resolving this:
1. Do a separate "early" pass over the options. This is easy for us to
do because there are no command-line options that allow the
"unstuck" form (so there's no chance of us mistaking an argument
for an option), though it does introduce a risk of incorrect
parsing later (e.g,. if we convert to parse-options).
2. Move the option parsing phase back to the start of the program, but
teach the stream-reading code never to override an existing value.
This is tricky, because stream "feature" lines override each other
(meaning we'd have to start tracking the source for every option).
3. Accept that we might parse a "feature export-marks" line that is
forbidden, as long we don't _act_ on it until after we've parsed
the command line options.
This would, in fact, work with the current code, but only because
the previous patch fixed the export-marks parser to avoid touching
the filesystem.
So while it works, it does carry risk of somebody getting it wrong
in the future in a rather subtle and unsafe way.
I've gone with option (1) here as simple, safe, and unlikely to cause
regressions.
This fixes CVE-2019-1348.
Signed-off-by: Jeff King <peff@peff.net>
|
|
When we parse the --export-marks option, we don't immediately open the
file, but we do create any leading directories. This can be especially
confusing when a command-line option overrides an in-stream one, in
which case we'd create the leading directory for the in-stream file,
even though we never actually write the file.
Let's instead create the directories just before opening the file, which
means we'll create only useful directories. Note that this could change
the handling of relative paths if we chdir() in between, but we don't
actually do so; the only permanent chdir is from setup_git_directory()
which runs before either code path (potentially we should take the
pre-setup dir into account to avoid surprising the user, but that's an
orthogonal change).
The test just adapts the existing "override" test to use paths with
leading directories. This checks both that the correct directory is
created (which worked before but was not tested), and that the
overridden one is not (our new fix here).
While we're here, let's also check the error result of
safe_create_leading_directories(). We'd presumably notice any failure
immediately after when we try to open the file itself, but we can give a
more specific error message in this case.
Signed-off-by: Jeff King <peff@peff.net>
|
|
When asked to import marks from "subdir/file.marks", we create the
leading directory "subdir" if it doesn't exist. This makes no sense for
importing marks, where we only ever open the path for reading.
Most of the time this would be a noop, since if the marks file exists,
then the leading directories exist, too. But if it doesn't (e.g.,
because --import-marks-if-exists was used), then we'd create the useless
directory.
This dates back to 580d5f83e7 (fast-import: always create marks_file
directories, 2010-03-29). Even then it was useless, so it seems to have
been added in error alongside the --export-marks case (which _is_
helpful).
Signed-off-by: Jeff King <peff@peff.net>
|
|
We parse options like "--max-pack-size=" using skip_prefix(), which
makes sense to get at the bytes after the "=". However, we also parse
"--quiet" and "--stats" with skip_prefix(), which allows things like
"--quiet-nonsense" to behave like "--quiet".
This was a mistaken conversion in 0f6927c229 (fast-import: put option
parsing code in separate functions, 2009-12-04). Let's tighten this to
an exact match, which was the original intent.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Our tests confirm that providing two "import-marks" options in a
fast-import stream is an error. However, the invoked command would fail
even without covering this case, because the marks files themselves do
not actually exist. Let's create the files to make sure we fail for the
right reason (we actually do, because the option parsing happens before
we open anything, but this future-proofs our test).
Signed-off-by: Jeff King <peff@peff.net>
|
|
These waste a process, and make the line longer than it needs to be.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We recently banned submodule urls that look like
command-line options. This is the matching change to ban
leading-dash paths.
As with the urls, this should not break any use cases that
currently work. Even with our "--" separator passed to
git-clone, git-submodule.sh gets confused. Without the code
portion of this patch, the clone of "-sub" added in t7417
would yield results like:
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed.
Moreover, naively adding such a submodule doesn't work:
$ git submodule add $url -sub
The following path is ignored by one of your .gitignore files:
-sub
even though there is no such ignore pattern (the test script
hacks around this with a well-placed "git mv").
Unlike leading-dash urls, though, it's possible that such a
path _could_ be useful if we eventually made it work. So
this commit should be seen not as recommending a particular
policy, but rather temporarily closing off a broken and
possibly dangerous code-path. We may revisit this decision
later.
There are two minor differences to the tests in t7416 (that
covered urls):
1. We don't have a "./-sub" escape hatch to make this
work, since the submodule code expects to be able to
match canonical index names to the path field (so you
are free to add submodule config with that path, but we
would never actually use it, since an index entry would
never start with "./").
2. After this patch, cloning actually succeeds. Since we
ignore the submodule.*.path value, we fail to find a
config stanza for our submodule at all, and simply
treat it as inactive. We still check for the "ignoring"
message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit taught the submodule code to invoke our
"git clone $url $path" with a "--" separator so that we
aren't confused by urls or paths that start with dashes.
However, that's just one code path. It's not clear if there
are others, and it would be an easy mistake to add one in
the future. Moreover, even with the fix in the previous
commit, it's quite hard to actually do anything useful with
such an entry. Any url starting with a dash must fall into
one of three categories:
- it's meant as a file url, like "-path". But then any
clone is not going to have the matching path, since it's
by definition relative inside the newly created clone. If
you spell it as "./-path", the submodule code sees the
"/" and translates this to an absolute path, so it at
least works (assuming the receiver has the same
filesystem layout as you). But that trick does not apply
for a bare "-path".
- it's meant as an ssh url, like "-host:path". But this
already doesn't work, as we explicitly disallow ssh
hostnames that begin with a dash (to avoid option
injection against ssh).
- it's a remote-helper scheme, like "-scheme::data". This
_could_ work if the receiver bends over backwards and
creates a funny-named helper like "git-remote--scheme".
But normally there would not be any helper that matches.
Since such a url does not work today and is not likely to do
anything useful in the future, let's simply disallow them
entirely. That protects the existing "git clone" path (in a
belt-and-suspenders way), along with any others that might
exist.
Our tests cover two cases:
1. A file url with "./" continues to work, showing that
there's an escape hatch for people with truly silly
repo names.
2. A url starting with "-" is rejected.
Note that we expect case (2) to fail, but it would have done
so even without this commit, for the reasons given above.
So instead of just expecting failure, let's also check for
the magic word "ignoring" on stderr. That lets us know that
we failed for the right reason.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we clone a submodule, we call "git clone $url $path".
But there's nothing to say that those components can't begin
with a dash themselves, confusing git-clone into thinking
they're options. Let's pass "--" to make it clear what we
expect.
There's no test here, because it's actually quite hard to
make these names work, even with "git clone" parsing them
correctly. And we're going to restrict these cases even
further in future commits. So we'll leave off testing until
then; this is just the minimal fix to prevent us from doing
something stupid with a badly formed entry.
Reported-by: joernchen <joernchen@phenoelit.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.13:
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/submodule-fix-loose:
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
|
|
There are a few reasons it's not a good idea to make
.gitmodules a symlink, including:
1. It won't be portable to systems without symlinks.
2. It may behave inconsistently, since Git may look at
this file in the index or a tree without bothering to
resolve any symbolic links. We don't do this _yet_, but
the config infrastructure is there and it's planned for
the future.
With some clever code, we could make (2) work. And some
people may not care about (1) if they only work on one
platform. But there are a few security reasons to simply
disallow it:
a. A symlinked .gitmodules file may circumvent any fsck
checks of the content.
b. Git may read and write from the on-disk file without
sanity checking the symlink target. So for example, if
you link ".gitmodules" to "../oops" and run "git
submodule add", we'll write to the file "oops" outside
the repository.
Again, both of those are problems that _could_ be solved
with sufficient code, but given the complications in (1) and
(2), we're better off just outlawing it explicitly.
Note the slightly tricky call to verify_path() in
update-index's update_one(). There we may not have a mode if
we're not updating from the filesystem (e.g., we might just
be removing the file). Passing "0" as the mode there works
fine; since it's not a symlink, we'll just skip the extra
checks.
Signed-off-by: Jeff King <peff@peff.net>
|
|
In the update_one(), we check verify_path() on the proposed
path before doing anything else. In preparation for having
verify_path() look at the file mode, let's stat the file
earlier, so we can check the mode accurately.
This is made a bit trickier by the fact that this function
only does an lstat in a few code paths (the ones that flow
down through process_path()). So we can speculatively do the
lstat() here and pass the results down, and just use a dummy
mode for cases where we won't actually be updating the index
from the filesystem.
Signed-off-by: Jeff King <peff@peff.net>
|
|
We're more restrictive than we need to be in matching ".GIT"
on case-sensitive filesystems; let's make a note that this
is intentional.
Signed-off-by: Jeff King <peff@peff.net>
|
|
We check ".git" and ".." in the same switch statement, and
fall through the cases to share the end-of-component check.
While this saves us a line or two, it makes modifying the
function much harder. Let's just write it out.
Signed-off-by: Jeff King <peff@peff.net>
|
|
We have the convenient skip_prefix() helper, but if you want
to do case-insensitive matching, you're stuck doing it by
hand. We could add an extra parameter to the function to
let callers ask for this, but the function is small and
somewhat performance-critical. Let's just re-implement it
for the case-insensitive version.
Signed-off-by: Jeff King <peff@peff.net>
|
|
This tests primarily for NTFS issues, but also adds one example of an
HFS+ issue.
Thanks go to Congyi Wu for coming up with the list of examples where
NTFS would possibly equate the filename with `.gitmodules`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
When we started to catch NTFS short names that clash with .git, we only
looked for GIT~1. This is sufficient because we only ever clone into an
empty directory, so .git is guaranteed to be the first subdirectory or
file in that directory.
However, even with a fresh clone, .gitmodules is *not* necessarily the
first file to be written that would want the NTFS short name GITMOD~1: a
malicious repository can add .gitmodul0000 and friends, which sorts
before `.gitmodules` and is therefore checked out *first*. For that
reason, we have to test not only for ~1 short names, but for others,
too.
It's hard to just adapt the existing checks in is_ntfs_dotgit(): since
Windows 2000 (i.e., in all Windows versions still supported by Git),
NTFS short names are only generated in the <prefix>~<number> form up to
number 4. After that, a *different* prefix is used, calculated from the
long file name using an undocumented, but stable algorithm.
For example, the short name of .gitmodules would be GITMOD~1, but if it
is taken, and all of ~2, ~3 and ~4 are taken, too, the short name
GI7EBA~1 will be used. From there, collisions are handled by
incrementing the number, shortening the prefix as needed (until ~9999999
is reached, in which case NTFS will not allow the file to be created).
We'd also want to handle .gitignore and .gitattributes, which suffer
from a similar problem, using the fall-back short names GI250A~1 and
GI7D29~1, respectively.
To accommodate for that, we could reimplement the hashing algorithm, but
it is just safer and simpler to provide the known prefixes. This
algorithm has been reverse-engineered and described at
https://usn.pw/blog/gen/2015/06/09/filenames/, which is defunct but
still available via https://web.archive.org/.
These can be recomputed by running the following Perl script:
-- snip --
use warnings;
use strict;
sub compute_short_name_hash ($) {
my $checksum = 0;
foreach (split('', $_[0])) {
$checksum = ($checksum * 0x25 + ord($_)) & 0xffff;
}
$checksum = ($checksum * 314159269) & 0xffffffff;
$checksum = 1 + (~$checksum & 0x7fffffff) if ($checksum & 0x80000000);
$checksum -= (($checksum * 1152921497) >> 60) * 1000000007;
return scalar reverse sprintf("%x", $checksum & 0xffff);
}
print compute_short_name_hash($ARGV[0]);
-- snap --
E.g., running that with the argument ".gitignore" will
result in "250a" (which then becomes "gi250a" in the code).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Both verify_path() and fsck match ".git", ".GIT", and other
variants specific to HFS+. Let's allow matching other
special files like ".gitmodules", which we'll later use to
enforce extra restrictions via verify_path() and fsck.
Signed-off-by: Jeff King <peff@peff.net>
|
|
We walk through the "name" string using an int, which can
wrap to a negative value and cause us to read random memory
before our array (e.g., by creating a tree with a name >2GB,
since "int" is still 32 bits even on most 64-bit platforms).
Worse, this is easy to trigger during the fsck_tree() check,
which is supposed to be protecting us from malicious
garbage.
Note one bit of trickiness in the existing code: we
sometimes assign -1 to "len" at the end of the loop, and
then rely on the "len++" in the for-loop's increment to take
it back to 0. This is still legal with a size_t, since
assigning -1 will turn into SIZE_MAX, which then wraps
around to 0 on increment.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Submodule "names" come from the untrusted .gitmodules file,
but we blindly append them to $GIT_DIR/modules to create our
on-disk repo paths. This means you can do bad things by
putting "../" into the name (among other things).
Let's sanity-check these names to avoid building a path that
can be exploited. There are two main decisions:
1. What should the allowed syntax be?
It's tempting to reuse verify_path(), since submodule
names typically come from in-repo paths. But there are
two reasons not to:
a. It's technically more strict than what we need, as
we really care only about breaking out of the
$GIT_DIR/modules/ hierarchy. E.g., having a
submodule named "foo/.git" isn't actually
dangerous, and it's possible that somebody has
manually given such a funny name.
b. Since we'll eventually use this checking logic in
fsck to prevent downstream repositories, it should
be consistent across platforms. Because
verify_path() relies on is_dir_sep(), it wouldn't
block "foo\..\bar" on a non-Windows machine.
2. Where should we enforce it? These days most of the
.gitmodules reads go through submodule-config.c, so
I've put it there in the reading step. That should
cover all of the C code.
We also construct the name for "git submodule add"
inside the git-submodule.sh script. This is probably
not a big deal for security since the name is coming
from the user anyway, but it would be polite to remind
them if the name they pick is invalid (and we need to
expose the name-checker to the shell anyway for our
test scripts).
This patch issues a warning when reading .gitmodules
and just ignores the related config entry completely.
This will generally end up producing a sensible error,
as it works the same as a .gitmodules file which is
missing a submodule entry (so "submodule update" will
barf, but "git clone --recurse-submodules" will print
an error but not abort the clone.
There is one minor oddity, which is that we print the
warning once per malformed config key (since that's how
the config subsystem gives us the entries). So in the
new test, for example, the user would see three
warnings. That's OK, since the intent is that this case
should never come up outside of malicious repositories
(and then it might even benefit the user to see the
message multiple times).
Credit for finding this vulnerability and the proof of
concept from which the test script was adapted goes to
Etienne Stalmans.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A regression fix for 2.11 that made the code to read the list of
alternate object stores overrun the end of the string.
* jk/info-alternates-fix:
read_info_alternates: warn on non-trivial errors
read_info_alternates: read contents into strbuf
|
|
"git fetch <there> <src>:<dst>" allows an object name on the <src>
side when the other side accepts such a request since Git v2.5, but
the documentation was left stale.
* jc/fetch-refspec-doc-update:
fetch doc: src side of refspec could be full SHA-1
|
|
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
|
|
Many codepaths have been updated to squelch -Wsign-compare
warnings.
* rj/no-sign-compare:
ALLOC_GROW: avoid -Wsign-compare warnings
cache.h: hex2chr() - avoid -Wsign-compare warnings
commit-slab.h: avoid -Wsign-compare warnings
git-compat-util.h: xsize_t() - avoid -Wsign-compare warnings
|
|
Assorted bugfixes and clean-ups.
* ma/ts-cleanups:
ThreadSanitizer: add suppressions
strbuf_setlen: don't write to strbuf_slopbuf
pack-objects: take lock before accessing `remaining`
convert: always initialize attr_action in convert_attrs
|
|
The scripts to drive TravisCI has been reorganized and then an
optimization to avoid spending cycles on a branch whose tip is
tagged has been implemented.
* ls/travis-scriptify:
travis-ci: fix "skip_branch_tip_with_tag()" string comparison
travis: dedent a few scripts that are indented overly deeply
travis-ci: skip a branch build if equal tag is present
travis-ci: move Travis CI code into dedicated scripts
|
|
The checkpoint command "git fast-import" did not flush updates to
refs and marks unless at least one object was created since the
last checkpoint, which has been corrected, as these things can
happen without any new object getting created.
* er/fast-import-dump-refs-on-checkpoint:
fast-import: checkpoint: dump branches/tags/marks even if object_count==0
|
|
"git fast-export" with -M/-C option issued "copy" instruction on a
path that is simultaneously modified, which was incorrect.
* jt/fast-export-copy-modify-fix:
fast-export: do not copy from modified file
|
|
"git branch -M a b" while on a branch that is completely unrelated
to either branch a or branch b misbehaved when multiple worktree
was in use. This has been fixed.
* nd/worktree-kill-parse-ref:
branch: fix branch renaming not updating HEADs correctly
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
|
|
Doc update.
* jc/doc-checkout:
checkout doc: clarify command line args for "checkout paths" mode
|
|
Docfix.
* tb/complete-describe:
completion: add --broken and --dirty to describe
|
|
* rs/rs-mailmap:
.mailmap: normalize name for René Scharfe
|
|
Improve behaviour of "git fsck" upon finding a missing object.
* rs/fsck-null-return-from-lookup:
fsck: handle NULL return of lookup_blob() and lookup_tree()
|
|
Leakfix and futureproofing.
* jk/sha1-loose-object-info-fix:
sha1_loose_object_info: handle errors from unpack_sha1_rest
|
|
* sb/branch-avoid-repeated-strbuf-release:
branch: reset instead of release a strbuf
|
|
* rs/qsort-s:
test-stringlist: avoid buffer underrun when sorting nothing
|
|
* jn/strbuf-doc-re-reuse:
strbuf doc: reuse after strbuf_release is fine
|
|
Code clean-up.
* rs/run-command-use-alloc-array:
run-command: use ALLOC_ARRAY
|
|
Code clean-up.
* rs/tag-null-pointer-arith-fix:
tag: avoid NULL pointer arithmetic
|
|
Code clean-up.
* rs/cocci-de-paren-call-params:
coccinelle: remove parentheses that become unnecessary
|
|
Docfix.
* ad/doc-markup-fix:
doc: correct command formatting
|
|
Doc updates.
* mr/doc-negative-pathspec:
docs: improve discoverability of exclude pathspec
|
Jeff King
Junio C Hamano
Johannes Schindelin