| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Simplify if chain in install_branch_config().
Signed-off-by: Adam <Adam@sigterm.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
prefixcmp/suffixcmp are gone.
|
|
Remove a confusing and deprecated "-q" option from "git diff-files";
"git diff-files --diff-filter=d" can be used instead.
|
|
|
|
"core.statinfo" configuration variable, which was a never-advertised
synonym to "core.checkstat", has been removed.
|
|
"git add <pathspec>" is the same as "git add -A <pathspec>" now,
i.e. it does not ignore removals from the directory specified.
|
|
"git add -u" and "git add -A" without any pathspec is a tree-wide
operation now, even when they are run in a subdirectory of the
working tree.
|
|
Finally update the "git push" default behaviour to "simple".
|
|
* maint:
i18n: proposed command missing leading dash
|
|
Teach "make test" to run networking tests when possible by default.
* jk/run-network-tests-by-default:
tests: turn on network daemon tests by default
|
|
Allow running "gc --auto" in the background.
* nd/daemonize-gc:
gc: config option for running --auto in background
daemon: move daemonize() to libgit.a
|
|
Teach combine-diff to honour the path-output-order imposed by
diffcore-order, and optimize how matching paths are found in
the N-way diffs made with parents.
* ks/combine-diff:
tests: add checking that combine-diff emits only correct paths
combine-diff: simplify intersect_paths() further
combine-diff: combine_diff_path.len is not needed anymore
combine-diff: optimize combine_diff_path sets intersection
diff test: add tests for combine-diff with orderfile
diffcore-order: export generic ordering interface
|
|
Add missing leading dash to proposed commands in french output when
using the command:
git branch --set-upstream remotename/branchname
and when upstream is gone
Signed-off-by: Sandy Carter <sandy.carter@savoirfairelinux.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Attempting to deepen a shallow repository by fetching over smart
HTTP transport failed in the protocol exchange, when no-done
extension was used. The fetching side waited for the list of
shallow boundary commits after the sending end stopped talking to
it.
* nd/http-fetch-shallow-fix:
t5537: move http tests out to t5539
fetch-pack: fix deepen shallow over smart http with no-done cap
protocol-capabilities.txt: document no-done
protocol-capabilities.txt: refer multi_ack_detailed back to pack-protocol.txt
pack-protocol.txt: clarify 'obj-id' in the last ACK after 'done'
test: rename http fetch and push test files
|
|
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
|
|
Code clean-up.
* dk/blame-janitorial:
builtin/blame.c::find_copy_in_blob: no need to scan for region end
blame.c: prepare_lines should not call xrealloc for every line
builtin/blame.c::prepare_lines: fix allocation size of sb->lineno
builtin/blame.c: eliminate same_suspect()
builtin/blame.c: struct blame_entry does not need a prev link
|
|
Teach "--gpg-sign" option to many commands that create commits.
* bc/gpg-sign-everywhere:
pull: add the --gpg-sign option.
rebase: add the --gpg-sign option
rebase: parse options in stuck-long mode
rebase: don't try to match -M option
rebase: remove useless arguments check
am: add the --gpg-sign option
am: parse options in stuck-long mode
git-sh-setup.sh: add variable to use the stuck-long mode
cherry-pick, revert: add the --gpg-sign option
|
|
A handful of documentation updates, all trivially harmless.
* al/docs:
docs/git-blame: explain more clearly the example pickaxe use
docs/git-clone: clarify use of --no-hardlinks option
docs/git-remote: capitalize first word of initial blurb
docs/merge-strategies: remove hyphen from mis-merges
|
|
Avoid having to assign port number to be used in tests manually.
* jk/test-ports:
tests: auto-set git-daemon port
tests: auto-set LIB_HTTPD_PORT from test name
|
|
* nd/reset-intent-to-add:
reset: support "--mixed --intent-to-add" mode
|
|
* ks/tree-diff-walk:
tree-walk: finally switch over tree descriptors to contain a pre-parsed entry
revision: convert to using diff_tree_sha1()
line-log: convert to using diff_tree_sha1()
tree-diff: convert diff_root_tree_sha1() to just call diff_tree_sha1 with old=NULL
tree-diff: allow diff_tree_sha1 to accept NULL sha1
|
|
All subcommands that take pathspecs mishandled an in-tree symbolic
link when given it as a full path from the root (which arguably is
a sick way to use pathspecs). "git ls-files -s $(pwd)/RelNotes" in
our tree is an easy reproduction recipe.
* mw/symlinks:
setup: don't dereference in-tree symlinks for absolute paths
setup: add abspath_part_inside_repo() function
t0060: add tests for prefix_path when path begins with work tree
t0060: add test for prefix_path when path == work tree
t0060: add test for prefix_path on symlinks via absolute paths
t3004: add test for ls-files on symlinks via absolute paths
|
|
* nd/test-rename-reset:
t7101, t7014: rename test files to indicate what that file is for
|
|
Make sure 'submodule update' modes that do not detach HEADs can
be used more pleasantly by checking out a concrete branch when
cloning them to prime the well.
* wk/submodule-on-branch:
Documentation: describe 'submodule update --remote' use case
submodule: explicit local branch creation in module_clone
submodule: document module_clone arguments in comments
submodule: make 'checkout' update_module mode more explicit
|
|
Shrink lifetime of variables by moving their definitions to an
inner scope where appropriate.
* ep/varscope:
builtin/gc.c: reduce scope of variables
builtin/fetch.c: reduce scope of variable
builtin/commit.c: reduce scope of variables
builtin/clean.c: reduce scope of variable
builtin/blame.c: reduce scope of variables
builtin/apply.c: reduce scope of variables
bisect.c: reduce scope of variable
|
|
When we replace broken macros from stdio.h in git-compat-util.h,
preprocessor.
* bs/stdio-undef-before-redef:
git-compat-util.h: #undef (v)snprintf before #define them
|
|
include.path variable (or any variable that expects a path that can
use ~username expansion) in the configuration file is not a
boolean, but the code failed to check it.
* jk/config-path-include-fix:
handle_path_include: don't look at NULL value
expand_user_path: do not look at NULL path
|
|
"git rev-parse --default" without the required option argument did
not diagnose it as an error.
* ds/rev-parse-required-args:
rev-parse: check i before using argv[i] against argc
|
|
"git diff --quiet -- pathspec1 pathspec2" sometimes did not return
correct status value.
* nd/diff-quiet-stat-dirty:
diff: do not quit early on stat-dirty files
diff.c: move diffcore_skip_stat_unmatch core logic out for reuse later
|
|
Allow "git cmd path/", when the 'path' is where a submodule is
bound to the top-level working tree, to match 'path', despite the
extra and unnecessary trailing slash.
* nd/submodule-pathspec-ending-with-slash:
clean: use cache_name_is_other()
clean: replace match_pathspec() with dir_path_match()
pathspec: pass directory indicator to match_pathspec_item()
match_pathspec: match pathspec "foo/" against directory "foo"
dir.c: prepare match_pathspec_item for taking more flags
pathspec: rename match_pathspec_depth() to match_pathspec()
pathspec: convert some match_pathspec_depth() to dir_path_match()
pathspec: convert some match_pathspec_depth() to ce_path_match()
|
|
Allow "merge-recursive" to work in an empty (temporary) working
tree again when there are renames involved, correcting an old
regression in 1.7.7 era.
* bk/refresh-missing-ok-in-merge-recursive:
merge-recursive.c: tolerate missing files while refreshing index
read-cache.c: extend make_cache_entry refresh flag with options
read-cache.c: refactor --ignore-missing implementation
t3030-merge-recursive: test known breakage with empty work tree
|
|
"git pull" learned to pay attention to pull.ff configuration
variable.
* da/pull-ff-configuration:
pull: add --ff-only to the help text
pull: add pull.ff configuration
|
|
Improvements to our hash table to get it to meet the needs of the
msysgit fscache project, with some nice performance improvements.
* kb/fast-hashmap:
name-hash: retire unused index_name_exists()
hashmap.h: use 'unsigned int' for hash-codes everywhere
test-hashmap.c: drop unnecessary #includes
.gitignore: test-hashmap is a generated file
read-cache.c: fix memory leaks caused by removed cache entries
builtin/update-index.c: cleanup update_one
fix 'git update-index --verbose --again' output
remove old hash.[ch] implementation
name-hash.c: remove cache entries instead of marking them CE_UNHASHED
name-hash.c: use new hash map implementation for cache entries
name-hash.c: remove unreferenced directory entries
name-hash.c: use new hash map implementation for directories
diffcore-rename.c: use new hash map implementation
diffcore-rename.c: simplify finding exact renames
diffcore-rename.c: move code around to prepare for the next patch
buitin/describe.c: use new hash map implementation
add a hashtable implementation that supports O(1) removal
submodule: don't access the .gitmodules cache entry after removing it
|
|
Introduce commit.gpgsign configuration variable to force every
commit to be GPG signed. The variable cannot be overriden from the
command line of some of the commands that create commits except for
"git commit" and "git commit-tree", but I am not convinced that it
is a good idea to sprinkle support for --no-gpg-sign everywhere,
which in turn means that this configuration variable may not be
such a good idea.
* nv/commit-gpgsign-config:
test the commit.gpgsign config option
commit-tree: add and document --no-gpg-sign
commit-tree: add the commit.gpgsign option to sign all commits
|
|
The region end can be looked up just like its beginning.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
db5360f3f496 (name-hash: refactor polymorphic index_name_exists();
2013-09-17) split index_name_exists() into index_file_exists() and
index_dir_exists() but retained index_name_exists() as a thin wrapper
to avoid disturbing possible in-flight topics. Since this change
landed in 'master' some time ago and there are no in-flight topics
referencing index_name_exists(), retire it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests are checking that :
- when commit.gpgsign is true, "git commit" creates signed commits
- when commit.gpgsign is false, "git commit" creates unsigned commits
- when commit.gpgsign is true, "git commit --no-gpg-sign" creates
unsigned commits
- when commit.gpgsign is true, "git rebase -f" creates signed commits
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document how to override commit.gpgsign configuration that is set to
true per "git commit" invocation (parse-options machinery lets us
say "--no-gpg-sign" to do so).
"git commit-tree" does not use parse-options, so manually add the
corresponding option for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you want to GPG sign all your commits, you have to add the -S option
all the time. The commit.gpgsign config option allows to sign all
commits automatically.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When QUICK is set (i.e. with --quiet) we try to do as little work as
possible, stopping after seeing the first change. stat-dirty is
considered a "change" but it may turn out not, if no actual content is
changed. The actual content test is performed too late in the process
and the shortcut may be taken prematurely, leading to incorrect return
code.
Assume we do "git diff --quiet". If we have a stat-dirty file "a" and
a really dirty file "b". We break the loop in run_diff_files() and
stop after "a" because we have got a "change". Later in
diffcore_skip_stat_unmatch() we find out "a" is actually not
changed. But there's nothing else in the diff queue, we incorrectly
declare "no change", ignoring the fact that "b" is changed.
This also happens to "git diff --quiet HEAD" when it hits
diff_can_quit_early() in oneway_diff().
This patch does the content test earlier in order to keep going if "a"
is unchanged. The test result is cached so that when
diffcore_skip_stat_unmatch() is done in the end, we spend no cycles on
re-testing "a".
Reported-by: IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
where "correct paths" stands for paths that are different to all
parents.
Up until now, we were testing combined diff only on one file, or on
several files which were all different (t4038-diff-combined.sh).
As recent thinko in "simplify intersect_paths() further" showed, and
also, since we are going to rework code for finding paths different to
all parents, lets write at least basic tests.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Linus once said:
I actually wish more people understood the really core low-level
kind of coding. Not big, complex stuff like the lockless name
lookup, but simply good use of pointers-to-pointers etc. For
example, I've seen too many people who delete a singly-linked
list entry by keeping track of the "prev" entry, and then to
delete the entry, doing something like
if (prev)
prev->next = entry->next;
else
list_head = entry->next;
and whenever I see code like that, I just go "This person
doesn't understand pointers". And it's sadly quite common.
People who understand pointers just use a "pointer to the entry
pointer", and initialize that with the address of the
list_head. And then as they traverse the list, they can remove
the entry without using any conditionals, by just doing a "*pp =
entry->next".
Applying that simplification lets us lose 7 lines from this function
even while adding 2 lines of comment.
I was tempted to squash this into the original commit, but because
the benchmarking described in the commit log is without this
simplification, I decided to keep it a separate follow-up patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The field was used in order to speed-up name comparison and also to
mark removed paths by setting it to 0.
Because the updated code does significantly less strcmp and also
just removes paths from the list and free right after we know a path
will not be needed, it is not needed anymore.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When generating combined diff, for each commit, we intersect diff
paths from diff(parent_0,commit) to diff(parent_i,commit) comparing
all paths pairs, i.e. doing it the quadratic way. That is correct,
but could be optimized.
Paths come from trees in sorted (= tree) order, and so does diff_tree()
emits resulting paths in that order too. Now if we look at diffcore
transformations, all of them, except diffcore_order, preserve resulting
path ordering:
- skip_stat_unmatch, grep, pickaxe, filter
-- just skip elements -> order stays preserved
- break -- just breaks diff for a path, adding path
dup after the path -> order stays preserved
- detect rename/copy -- resulting paths are emitted sorted
(verified empirically)
So only diffcore_order changes diff paths ordering.
But diffcore_order meaning affects only presentation - i.e. only how to
show the diff, so we could do all the internal computations without
paths reordering, and order only resultant paths set. This is faster,
since, if we know two paths sets are all ordered, their intersection
could be done in linear time.
This patch does just that.
Timings for `git log --raw --no-abbrev --no-renames` without `-c` ("git log")
and with `-c` ("git log -c") before and after the patch are as follows:
linux.git v3.10..v3.11
log log -c
before 1.9s 20.4s
after 1.9s 16.6s
navy.git (private repo)
log log -c
before 0.83s 15.6s
after 0.83s 2.1s
P.S.
I think linux.git case is sped up not so much as the second one, since
in navy.git, there are more exotic (subtree, etc) merges.
P.P.S.
My tracing showed that the rest of the time (16.6s vs 1.9s) is usually
spent in computing huge diffs from commit to second parent. Will try to
deal with it, if I'll have time.
P.P.P.S.
For combine_diff_path, ->len is not needed anymore - will remove it in
the next noisy cleanup path, to maintain good signal/noise ratio here.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the next patch combine-diff will have special code-path for taking
orderfile into account. Prepare for making changes by introducing
coverage tests for that case.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
diffcore_order() interface only accepts a queue of `struct
diff_filepair`.
In the next patches, we'll want to order `struct combine_diff_path`
by path, so let's first rework diffcore-order to also provide
generic low-level interface for ordering arbitrary objects, provided
they have path accessors.
The new interface is:
- `struct obj_order` for describing objects to ordering routine, and
- order_objects() for actually doing the ordering work.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This continues 4651ece8 (Switch over tree descriptors to contain a
pre-parsed entry) and moves the only rest computational part
mode = canon_mode(mode)
from tree_entry_extract() to tree entry decode phase - to
decode_tree_entry().
The reason to do it, is that canon_mode() is at least 2 conditional
jumps for regular files, and that could be noticeable should canon_mode()
be invoked several times.
That does not matter for current Git codebase, where typical tree
traversal is
while (t->size) {
sha1 = tree_entry_extract(t, &path, &mode);
...
update_tree_entry(t);
}
i.e. we do t -> sha1,path.mode "extraction" only once per entry. In such
cases, it does not matter performance-wise, where that mode
canonicalization is done - either once in tree_entry_extract(), or once
in decode_tree_entry() called by update_tree_entry() - it is
approximately the same.
But for future code, which could need to work with several tree_desc's
in parallel, it could be handy to operate on tree_desc descriptors, and
do "extracts" only when needed, or at all, access only relevant part of
it through structure fields directly.
And for such situations, having canon_mode() be done once in decode
phase is better - we won't need to pay the performance price of 2 extra
conditional jumps on every t->mode access.
So let's move mode canonicalization to decode_tree_entry(). That was the
final bit. Now after tree entry is decoded, it is fully ready and could
be accessed either directly via field, or through tree_entry_extract()
which this time got really "totally trivial".
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Adam
Junio C Hamano
Sandy Carter
David Kastrup
Eric Sunshine
Karsten Blees
Nicolas Vigier
Nguyễn Thái Ngọc Duy
Kirill Smelkov